Thirteen volatile compounds were identified from Flemingia macrophylla plants. Eight major components significantly attracted the tea green leafhoppers, Empoasca flavescens F. Based on their relative abundances, follo...Thirteen volatile compounds were identified from Flemingia macrophylla plants. Eight major components significantly attracted the tea green leafhoppers, Empoasca flavescens F. Based on their relative abundances, following synthetic blends were made for field experiments: 1) eight-component-attractant blend included Z-3-hexen-1-ol, Z-3-hexenyl acetate, Z-ocimene, Me SA, Z-3-hexenyl butyrate, dodecane, hexadecane and nonanal at 10, 10, 1, 11, 2, 6, 2 and 4 mg mL^-1 in n-hexane, respectively;2) four-component-attractant blend #1 contained hexadecane, Z-3-hexenyl acetate, Z-3-hexen-1-ol and nonanal at 2, 10, 10 and 4 mg mL^-1 in n-hexane, respectively;3) four-component-attractant blend #2 contained hexadecane, Z-3-hexenyl acetate, Z-3-hexen-1-ol and Me SA at 2, 10, 10 and 11 mg mL^-1 in n-hexane, respectively. Thymol and 1-methoxy-4-methyl-2-(1-methylethyl)-benzene, identified from Lavandula angustifolia aeration samples, significantly repelled the leafhopper as strong repellents when tested alone or in combination at 10 mg mL^-1. For field bioassays, each attractant lure was attached to a bud green sticky board hung from a bamboo stick at above tea plant level for catching the leafhoppers, whereas the repellent dispenser was tied to a tea branch inside tea clump for pushing the leafhoppers away from tea clumps. The results showed that the eight-component-attractant blend caught similar numbers of the leafhopper as did the four-component-attractant blend #1 at about 53–79 leafhoppers/trap/day, which were significantly higher than those on the hexane-control bud green sticky boards. Average leafhopper catches from un-baited sticky boards were about 51–73 leafhoppers/trap/day when pushed by the repellents placed inside tea plants, with the two-component-repellent blend being more effective than their single components. When the two-component-repellent blend was further tested with the three attractant blends in a push-pull fashion, average trap catches ranged from 62 to 92 leafhoppers/trap/day. Control efficacy on the leafhoppers within the push-pull zones increased progressively from day 1(43%) to day 5(73%). This push-pull approach might have a great potential as a green control strategy for combating the tea green leafhoppers.展开更多
In China, farmers employed in non-farm work have become important socio-economic actors, but few studies have examined the farmers' perspective in making their work location choices. Based on "push-pull"...In China, farmers employed in non-farm work have become important socio-economic actors, but few studies have examined the farmers' perspective in making their work location choices. Based on "push-pull" migration theory, this paper utilizes sectional data from a 2013 survey of farmers in China's Three Gorges Reservoir area to empirically analyze the factors influencing migrant workers' choice of employment location. The results indicate that 60.46% of laborers have migrated from their home province, whereas 39.54% have remained in their home province. Focusing on personal, household, and community characteristics—in addition to the economic characteristics of the sample counties—multinomial logistic regression models reveal that farmer-laborers' employment location decisions are influenced by their personal capital endowment(age, years of education and social networks), family structure(the number of laborers, elders, children and students), home village characteristics(location, economic development level and the degree of relief of the land) and home county economic development level. Notably, male and female laborers' location decisions reveal a converging trend, and their differences are not pronounced. Per capita arable land area has little influence on location decisions, whereas the educational level of laborers has a significant impact. The results differ significantly from those found in previous studies.展开更多
With the widespread application of distributed systems, many problems need to be solved urgently. How to design distributed optimization strategies has become a research hotspot. This article focuses on the solution r...With the widespread application of distributed systems, many problems need to be solved urgently. How to design distributed optimization strategies has become a research hotspot. This article focuses on the solution rate of the distributed convex optimization algorithm. Each agent in the network has its own convex cost function. We consider a gradient-based distributed method and use a push-pull gradient algorithm to minimize the total cost function. Inspired by the current multi-agent consensus cooperation protocol for distributed convex optimization algorithm, a distributed convex optimization algorithm with finite time convergence is proposed and studied. In the end, based on a fixed undirected distributed network topology, a fast convergent distributed cooperative learning method based on a linear parameterized neural network is proposed, which is different from the existing distributed convex optimization algorithms that can achieve exponential convergence. The algorithm can achieve finite-time convergence. The convergence of the algorithm can be guaranteed by the Lyapunov method. The corresponding simulation examples also show the effectiveness of the algorithm intuitively. Compared with other algorithms, this algorithm is competitive.展开更多
BACKGROUND： Push-pull effect is often caused during maneuver, and the changes of unconsciousness induced can affect or damage cerebral neurons at various degrees. OBJECTIVE： To observe the effect of simulated push-p...BACKGROUND： Push-pull effect is often caused during maneuver, and the changes of unconsciousness induced can affect or damage cerebral neurons at various degrees. OBJECTIVE： To observe the effect of simulated push-pull maneuver at various degrees on injury of hippocampal neurons in rats and analyze its phase effect. DESIGN： Randomized control study.SETTING ： Physiological Department of Jilin Medical College.MATERIALS： A total of 40 healthy male Wistar rats, of clean grade, weighting 205-300 g, aged 3-4 months, were randomly divided into control group （n=4） and three push-pull experimental groups, including ＋2 Gz group （intensity： -2 Gz to ＋2 Gz, n=12）, ＋6 Gz group （-6 Gz to ＋6 Gz, n=12） and ＋8 Gz group （-8 Gz to ＋8 Gz, n=12）.METHODS： The experiment was completed in the Physiological Department of Jilin Military Medical College from March 2002 to May 2003. ① Rats in the experimental groups were put at the specially rolling arm of animal centrifugal machine. Then, they were pushed and pulled with ±2 Gz, ±6 Gz and ±8 Gz, respectively. The jolt was 1 Gz/s. However, rats in control group were not treated with any ways. ② Stroke index and neurological evaluation were performed on rats in the experimental groups at 0.5, 6 and 24 hours after push-pull. Stroke index was 25 points in total. The higher the scores were, the severer the cerebral injury was. Neurological evaluation was 10 points in total. The higher the scores were, the severer the nerve injury was. ③ Hippocampal tissue in brain of rats were selected to cut into sections at each time points, and form and distribution of neurons were observed in hippocampal areas with HE staining. Degrees of neuronal injury in hippocampal CA1 area were assayed after push-pull at various degrees with electron microscope. ④ Measurement data were compared with t test.MAIN OUTCOME MEASURES：① Stroke index and neurological evaluation; ② form and distribution of neurons in hippocampal areas;③ degrees of neuronal injury in hippocampal CA1 area.RESULTS： A total of 40 rats were involved in the final analysis. ① Stroke index and neurological evaluation of rats in experimental groups： At 30 minutes and 6 hours after push-pull exposure, stroke index and neurological evaluation were higher in ±6Gz group and ±8 Gz group than those in control group （P 〈 0.01）, especially at 6 hours after push-pull exposure, those in ±8 Gz group were the highest at each time points [（11.00±2.16）, （5.75±1.70） points]. At 24 hours after exposure, those were decreased as compared with those within the former two time points, but the values were still higher than those in control group （P 〈 0.05-0.01）. ② Results of HE staining： At 6 and 24 hours after exposure, partially neuronal degeneration was observed in pyramidal layer in ±6 Gz group and ±8 Gz group, including crenation of neurons, tdangle or polygon, and karyopycnosis, especially the injury in ±8 Gz group was the most obvious at 6 hours after exposure. ③ Results of ultrastructure with electron microscope： Partially neuronal degeneration at various degrees was observed in hippocampal CA1 area in ±2 Gz group at 6 hours after exposure and in ±6 Gz group and ±8 Gz group at 6 and 24 hours after exposure. At 6 hours after exposure, nucleus of hippocampal neurons in ±8 Gz group was irregular and umbilication. Caryotin was aggregated, nuclear matrix was swelled and disorder, and vacuolation was also observed. Rough endoplasmic reticulum was expanded, mitochondrium was swelled, and crista was disappeared.CONCLUSION： ① Push-pull cannot damage hippocampal neurons of rats in ±2 Gz group. ② Exposure can cause injury of hippocampal neurons of rats in ±6Gz group and ±8 Gz group, especially the injury is the severest at 6 hours after exposure in ±8 Gz group and relieves gradually 24 hours later.展开更多
Developing countries establishing international branch campuses （IBCs） is an emerging trend, and currently compromises 17% percent of the market in terms of the number of IBCs. While researchers have applied differe...Developing countries establishing international branch campuses （IBCs） is an emerging trend, and currently compromises 17% percent of the market in terms of the number of IBCs. While researchers have applied different social science perspectives to analyze cross-border higher education and IBCs, they usually emphasize developed countries as exporters and developing countries as importers of higher education. The phenomenon of developing countries as exporters of higher education has seldom been looked at so far in the research. This paper first describes the current development of IBCs, then illustrates what social science perspectives have been used on this topic, followed by how push-pull theory relates to developing countries being exporters of IBCs. The paper aims to combine E.S. Lee＇s push-pull theory and Gu＇s push-pull framework to analyze the push and pull factors in their advertisement and marketing claims when higher education institutions （HEIs） from developing countries plan to establish branch campuses in foreign countries. Soochow University in Laos is used as a case study. Furthermore, intermediate barriers and solutions are also identified in this case study. However, this case study has its own uniqueness and only serves heuristic for future research.展开更多
In this study, the authors experimentally investigated the changes of the mean velocity component profiles, half-widths （b12）, turbulence intensities, Reynolds shear stress and intermittency of turbulence of a trans...In this study, the authors experimentally investigated the changes of the mean velocity component profiles, half-widths （b12）, turbulence intensities, Reynolds shear stress and intermittency of turbulence of a transient plane turbulent jet developing from a jet exit into a hood opening. The values of maximum mean-velocity and half-widths of the axial velocity profile along the center-line of the jet are greater than those for a fully developed two-dimensional jet. Turbulence intensity in the axial direction is not affected by the flow rate ratio. At the same time, turbulence intensity in the lateral direction becomes greater as the hood is approached and the flow rate ratio Q3/Q1 becomes larger （QI is jet flow rate from nozzle and Q3 is suction flow rate produced by the hood）. These experimental results are in accord with the distributions of production terms in the axial and lateral directions. Reynolds shear stress becomes smaller as the flow rate ratio becomes larger near the hood. Dimensionless distance y1/br2, from the center axis of the flow to the point where intermittency factor y becomes a constant value, narrows as the flow rate ratio becomes larger near the hood.展开更多
A soft switching three-transistor push-pull(TTPP)converter is proposed in this paper. The 3rd transistor is inserted in the primary side of a traditional push-pull converter. Two primitive transistors can achieve zero...A soft switching three-transistor push-pull(TTPP)converter is proposed in this paper. The 3rd transistor is inserted in the primary side of a traditional push-pull converter. Two primitive transistors can achieve zero-voltage-switching (ZVS) easily under a wide load range, the 3rd transistor can also realize zero-voltage-switching assisted by leakage inductance. The rated voltage of the 3rd transistor is half of that of the main transistors. The operation theory is explained in detail. The soft-switching realization conditions are derived. An 800 W with 83.3 kHz switching frequency prototype has been built. The experimental result is provided to verify the analysis.展开更多
Covalent organic polymer(COP)thin film-based memristors have generated intensive research interest,but the studies are still in their infancy.Herein,by controlling the content of hydroxyl groups in the aldehyde monome...Covalent organic polymer(COP)thin film-based memristors have generated intensive research interest,but the studies are still in their infancy.Herein,by controlling the content of hydroxyl groups in the aldehyde monomer,Py-COP thin films with different electronic push-pull effects were fabricated bearing distinct memory performances,where the films were prepared by the solid-liquid interface method on the ITO substrates and further fabricated as memory devices with ITO/Py-COPs/Ag architectures.The Py-COP-1-based memory device only exhibited binary memory behavior with an ON/OFF ratio of 1:10^(1.87).In contrast,the device based on Py-COP-2 demonstrated ternary memory behavior with an ON/OFF ratio of 1:10^(0.6):10^(3.1) and a ternary yield of 55%.The ternary memory mechanism of the ITO/Py-COP-2/Ag memory device is most likely due to the combination of the trapping of charge carriers and conductive filaments.Interestingly,the Py-COPs-based devices can successfully emulate the synaptic potentiation/depression behavior,clarifying the programmability of these devices in neuromorphic systems.These results suggest that the electronic properties of COPs can be precisely tuned at the molecular level,which provides a promising route for designing multi-level memory devices.展开更多
Two triphenylamine-based star-type push-pull chromophores(T1, T2) were designed and synthesized.Triphenylamine serves as the central core and acts as an electron-donating group surrounded by electronwithdrawing pentaf...Two triphenylamine-based star-type push-pull chromophores(T1, T2) were designed and synthesized.Triphenylamine serves as the central core and acts as an electron-donating group surrounded by electronwithdrawing pentafluorobenzene or N,N-dimethyl substituted tetrafluorobenzene, which are connected by ethylene bridges. Single-crystal X-ray diffraction confirmed the structures and molecular arrangement of two chromophores. The systematic photophysical research of T1 and T2 absorption characteristics was carried out to gain a better understanding of how structure-property relationships affect the observed nonlinear optical absorption phenomenon. Complementary calculations based on density functional theory(DFT) further confirmed the experimental results. Both chromophores exhibited excellent two-photon absorption(TPA) properties in CH_(2)Cl_(2). Notably, T2 has more remarkable nonlinear optical absorption effects with the TPA cross-section up to 4.24 × 10~7GM. By adjusting the electronic structures of the chromophores through introducing pentafluorobenzene or N,N-dimethyl as functional groups with different electron-donating or withdrawing behaviors, the TPA performance of the small organic molecule could be greatly enhanced. These molecular structures with push-pull systems were excellent candidates for different two-photon applications.展开更多
Lappaconitine is a water-insoluble drug, which was used as model drug in this study. Currently, two osmotically controlled delivery systems that are widely used for water-insoluble drug are monolithic osmotic tablet ...Lappaconitine is a water-insoluble drug, which was used as model drug in this study. Currently, two osmotically controlled delivery systems that are widely used for water-insoluble drug are monolithic osmotic tablet （MOT） and push-pull osmotic pump （PPOP）. In the present study, lappaconitine solid dispersion monolithic osmotic tablet （lappaconitine-SD-MOT） and lappaconitine-PPOP were developed. The prepared lappaconitine-PPOP was able to delivery drug at the rate of approximate zero-order （r = 0.9931）, and the cumulative release was above 95.0%. The lappaconitine-SD-MOT showed a comparatively poor linearity when the data were plotted according to the zero-order equation （r = 0.9798）, and the cumulative release was 84.69%. Lappaconitine-PPOP exhibited better controlled drug release （higher regression value） compared with lappaconitine-SD-MOT. The similarity index （f2） between lappaconitine-PPOP and lappaconitine-SD-MOT was 49.1 （〈50）. A clear difference of drug release characteristics between the lappaconitine-SD-MOT and lappaconitine-PPOP was revealed. It indicated that the drug release performance of lappaconitine-PPOP could gain favorable zero-order kinetics and higher cumulative release compared with lappaconitine-SD-MOT. Therefore, these results suggested that PPOP was still a very effective device for the delivery of poorly water-soluble drug with zero-order pattern.展开更多
A polymer directional coupler （DC） electro-optic switch with push-pull electrodes and rib waveguides is designed based on the conformal transforming method, image method, coupled mode theory, and electro-optic modul...A polymer directional coupler （DC） electro-optic switch with push-pull electrodes and rib waveguides is designed based on the conformal transforming method, image method, coupled mode theory, and electro-optic modulation theory. Its structure and principle are described, the design and optimization are performed, and the characteristics are analyzed, including the coupling length, switching voltage, output power, insertion loss, and crosstalk. To realize normal switching function,the fabrication tolerance,wavelength shift, and coupling loss between a single mode fiber （SMF） and the waveguide are discussed. Simulation results show that the coupling length is 3082μm; the push-pull switching voltage is 2.14V;and the insertion loss and crosstalk are less than 1.14 and -30dB,respectively. The proposed analytical technique on waveguides and electrodes is proven to be accurate and computationally efficient when compared with the beam propa- gation method （BPM） and the experimental results.展开更多
基金financially supported by the National Key Research and Development Program of China (2018YFC1604402)the Natural Science Foundation of Zhejiang Province, China (LY17C140002)+1 种基金the Fundamental and Public Welfare of Zhejiang Province, China (LGN18C160006)the College Student Innovation and Entrepreneurship of Zhejiang Province, China (2017R409055)
文摘Thirteen volatile compounds were identified from Flemingia macrophylla plants. Eight major components significantly attracted the tea green leafhoppers, Empoasca flavescens F. Based on their relative abundances, following synthetic blends were made for field experiments: 1) eight-component-attractant blend included Z-3-hexen-1-ol, Z-3-hexenyl acetate, Z-ocimene, Me SA, Z-3-hexenyl butyrate, dodecane, hexadecane and nonanal at 10, 10, 1, 11, 2, 6, 2 and 4 mg mL^-1 in n-hexane, respectively;2) four-component-attractant blend #1 contained hexadecane, Z-3-hexenyl acetate, Z-3-hexen-1-ol and nonanal at 2, 10, 10 and 4 mg mL^-1 in n-hexane, respectively;3) four-component-attractant blend #2 contained hexadecane, Z-3-hexenyl acetate, Z-3-hexen-1-ol and Me SA at 2, 10, 10 and 11 mg mL^-1 in n-hexane, respectively. Thymol and 1-methoxy-4-methyl-2-(1-methylethyl)-benzene, identified from Lavandula angustifolia aeration samples, significantly repelled the leafhopper as strong repellents when tested alone or in combination at 10 mg mL^-1. For field bioassays, each attractant lure was attached to a bud green sticky board hung from a bamboo stick at above tea plant level for catching the leafhoppers, whereas the repellent dispenser was tied to a tea branch inside tea clump for pushing the leafhoppers away from tea clumps. The results showed that the eight-component-attractant blend caught similar numbers of the leafhopper as did the four-component-attractant blend #1 at about 53–79 leafhoppers/trap/day, which were significantly higher than those on the hexane-control bud green sticky boards. Average leafhopper catches from un-baited sticky boards were about 51–73 leafhoppers/trap/day when pushed by the repellents placed inside tea plants, with the two-component-repellent blend being more effective than their single components. When the two-component-repellent blend was further tested with the three attractant blends in a push-pull fashion, average trap catches ranged from 62 to 92 leafhoppers/trap/day. Control efficacy on the leafhoppers within the push-pull zones increased progressively from day 1(43%) to day 5(73%). This push-pull approach might have a great potential as a green control strategy for combating the tea green leafhoppers.
基金financial supports from the National Natural Science Foundation of China (Grant Nos. 41571527, 41301193, 41101552,41401198)Main Direction Program (KZCX2-EW317)West Light Foundation of the Chinese Academy of Sciences (2013Yuhui)
文摘In China, farmers employed in non-farm work have become important socio-economic actors, but few studies have examined the farmers' perspective in making their work location choices. Based on "push-pull" migration theory, this paper utilizes sectional data from a 2013 survey of farmers in China's Three Gorges Reservoir area to empirically analyze the factors influencing migrant workers' choice of employment location. The results indicate that 60.46% of laborers have migrated from their home province, whereas 39.54% have remained in their home province. Focusing on personal, household, and community characteristics—in addition to the economic characteristics of the sample counties—multinomial logistic regression models reveal that farmer-laborers' employment location decisions are influenced by their personal capital endowment(age, years of education and social networks), family structure(the number of laborers, elders, children and students), home village characteristics(location, economic development level and the degree of relief of the land) and home county economic development level. Notably, male and female laborers' location decisions reveal a converging trend, and their differences are not pronounced. Per capita arable land area has little influence on location decisions, whereas the educational level of laborers has a significant impact. The results differ significantly from those found in previous studies.
文摘With the widespread application of distributed systems, many problems need to be solved urgently. How to design distributed optimization strategies has become a research hotspot. This article focuses on the solution rate of the distributed convex optimization algorithm. Each agent in the network has its own convex cost function. We consider a gradient-based distributed method and use a push-pull gradient algorithm to minimize the total cost function. Inspired by the current multi-agent consensus cooperation protocol for distributed convex optimization algorithm, a distributed convex optimization algorithm with finite time convergence is proposed and studied. In the end, based on a fixed undirected distributed network topology, a fast convergent distributed cooperative learning method based on a linear parameterized neural network is proposed, which is different from the existing distributed convex optimization algorithms that can achieve exponential convergence. The algorithm can achieve finite-time convergence. The convergence of the algorithm can be guaranteed by the Lyapunov method. The corresponding simulation examples also show the effectiveness of the algorithm intuitively. Compared with other algorithms, this algorithm is competitive.
文摘BACKGROUND： Push-pull effect is often caused during maneuver, and the changes of unconsciousness induced can affect or damage cerebral neurons at various degrees. OBJECTIVE： To observe the effect of simulated push-pull maneuver at various degrees on injury of hippocampal neurons in rats and analyze its phase effect. DESIGN： Randomized control study.SETTING ： Physiological Department of Jilin Medical College.MATERIALS： A total of 40 healthy male Wistar rats, of clean grade, weighting 205-300 g, aged 3-4 months, were randomly divided into control group （n=4） and three push-pull experimental groups, including ＋2 Gz group （intensity： -2 Gz to ＋2 Gz, n=12）, ＋6 Gz group （-6 Gz to ＋6 Gz, n=12） and ＋8 Gz group （-8 Gz to ＋8 Gz, n=12）.METHODS： The experiment was completed in the Physiological Department of Jilin Military Medical College from March 2002 to May 2003. ① Rats in the experimental groups were put at the specially rolling arm of animal centrifugal machine. Then, they were pushed and pulled with ±2 Gz, ±6 Gz and ±8 Gz, respectively. The jolt was 1 Gz/s. However, rats in control group were not treated with any ways. ② Stroke index and neurological evaluation were performed on rats in the experimental groups at 0.5, 6 and 24 hours after push-pull. Stroke index was 25 points in total. The higher the scores were, the severer the cerebral injury was. Neurological evaluation was 10 points in total. The higher the scores were, the severer the nerve injury was. ③ Hippocampal tissue in brain of rats were selected to cut into sections at each time points, and form and distribution of neurons were observed in hippocampal areas with HE staining. Degrees of neuronal injury in hippocampal CA1 area were assayed after push-pull at various degrees with electron microscope. ④ Measurement data were compared with t test.MAIN OUTCOME MEASURES：① Stroke index and neurological evaluation; ② form and distribution of neurons in hippocampal areas;③ degrees of neuronal injury in hippocampal CA1 area.RESULTS： A total of 40 rats were involved in the final analysis. ① Stroke index and neurological evaluation of rats in experimental groups： At 30 minutes and 6 hours after push-pull exposure, stroke index and neurological evaluation were higher in ±6Gz group and ±8 Gz group than those in control group （P 〈 0.01）, especially at 6 hours after push-pull exposure, those in ±8 Gz group were the highest at each time points [（11.00±2.16）, （5.75±1.70） points]. At 24 hours after exposure, those were decreased as compared with those within the former two time points, but the values were still higher than those in control group （P 〈 0.05-0.01）. ② Results of HE staining： At 6 and 24 hours after exposure, partially neuronal degeneration was observed in pyramidal layer in ±6 Gz group and ±8 Gz group, including crenation of neurons, tdangle or polygon, and karyopycnosis, especially the injury in ±8 Gz group was the most obvious at 6 hours after exposure. ③ Results of ultrastructure with electron microscope： Partially neuronal degeneration at various degrees was observed in hippocampal CA1 area in ±2 Gz group at 6 hours after exposure and in ±6 Gz group and ±8 Gz group at 6 and 24 hours after exposure. At 6 hours after exposure, nucleus of hippocampal neurons in ±8 Gz group was irregular and umbilication. Caryotin was aggregated, nuclear matrix was swelled and disorder, and vacuolation was also observed. Rough endoplasmic reticulum was expanded, mitochondrium was swelled, and crista was disappeared.CONCLUSION： ① Push-pull cannot damage hippocampal neurons of rats in ±2 Gz group. ② Exposure can cause injury of hippocampal neurons of rats in ±6Gz group and ±8 Gz group, especially the injury is the severest at 6 hours after exposure in ±8 Gz group and relieves gradually 24 hours later.
文摘Developing countries establishing international branch campuses （IBCs） is an emerging trend, and currently compromises 17% percent of the market in terms of the number of IBCs. While researchers have applied different social science perspectives to analyze cross-border higher education and IBCs, they usually emphasize developed countries as exporters and developing countries as importers of higher education. The phenomenon of developing countries as exporters of higher education has seldom been looked at so far in the research. This paper first describes the current development of IBCs, then illustrates what social science perspectives have been used on this topic, followed by how push-pull theory relates to developing countries being exporters of IBCs. The paper aims to combine E.S. Lee＇s push-pull theory and Gu＇s push-pull framework to analyze the push and pull factors in their advertisement and marketing claims when higher education institutions （HEIs） from developing countries plan to establish branch campuses in foreign countries. Soochow University in Laos is used as a case study. Furthermore, intermediate barriers and solutions are also identified in this case study. However, this case study has its own uniqueness and only serves heuristic for future research.
文摘In this study, the authors experimentally investigated the changes of the mean velocity component profiles, half-widths （b12）, turbulence intensities, Reynolds shear stress and intermittency of turbulence of a transient plane turbulent jet developing from a jet exit into a hood opening. The values of maximum mean-velocity and half-widths of the axial velocity profile along the center-line of the jet are greater than those for a fully developed two-dimensional jet. Turbulence intensity in the axial direction is not affected by the flow rate ratio. At the same time, turbulence intensity in the lateral direction becomes greater as the hood is approached and the flow rate ratio Q3/Q1 becomes larger （QI is jet flow rate from nozzle and Q3 is suction flow rate produced by the hood）. These experimental results are in accord with the distributions of production terms in the axial and lateral directions. Reynolds shear stress becomes smaller as the flow rate ratio becomes larger near the hood. Dimensionless distance y1/br2, from the center axis of the flow to the point where intermittency factor y becomes a constant value, narrows as the flow rate ratio becomes larger near the hood.
文摘A soft switching three-transistor push-pull(TTPP)converter is proposed in this paper. The 3rd transistor is inserted in the primary side of a traditional push-pull converter. Two primitive transistors can achieve zero-voltage-switching (ZVS) easily under a wide load range, the 3rd transistor can also realize zero-voltage-switching assisted by leakage inductance. The rated voltage of the 3rd transistor is half of that of the main transistors. The operation theory is explained in detail. The soft-switching realization conditions are derived. An 800 W with 83.3 kHz switching frequency prototype has been built. The experimental result is provided to verify the analysis.
基金financially supported by the National Natural Science Foundation of China(Nos.21972021 and 22111530111)the support of China Scholarship Council(No.202206650013).
文摘Covalent organic polymer(COP)thin film-based memristors have generated intensive research interest,but the studies are still in their infancy.Herein,by controlling the content of hydroxyl groups in the aldehyde monomer,Py-COP thin films with different electronic push-pull effects were fabricated bearing distinct memory performances,where the films were prepared by the solid-liquid interface method on the ITO substrates and further fabricated as memory devices with ITO/Py-COPs/Ag architectures.The Py-COP-1-based memory device only exhibited binary memory behavior with an ON/OFF ratio of 1:10^(1.87).In contrast,the device based on Py-COP-2 demonstrated ternary memory behavior with an ON/OFF ratio of 1:10^(0.6):10^(3.1) and a ternary yield of 55%.The ternary memory mechanism of the ITO/Py-COP-2/Ag memory device is most likely due to the combination of the trapping of charge carriers and conductive filaments.Interestingly,the Py-COPs-based devices can successfully emulate the synaptic potentiation/depression behavior,clarifying the programmability of these devices in neuromorphic systems.These results suggest that the electronic properties of COPs can be precisely tuned at the molecular level,which provides a promising route for designing multi-level memory devices.
基金supported by the National Natural Science Foundation of China (Nos. 51972185, 12174211, 11874232 and 31202117)the Natural Science Foundation of Shandong Province (No. ZR2020ZD38)。
文摘Two triphenylamine-based star-type push-pull chromophores(T1, T2) were designed and synthesized.Triphenylamine serves as the central core and acts as an electron-donating group surrounded by electronwithdrawing pentafluorobenzene or N,N-dimethyl substituted tetrafluorobenzene, which are connected by ethylene bridges. Single-crystal X-ray diffraction confirmed the structures and molecular arrangement of two chromophores. The systematic photophysical research of T1 and T2 absorption characteristics was carried out to gain a better understanding of how structure-property relationships affect the observed nonlinear optical absorption phenomenon. Complementary calculations based on density functional theory(DFT) further confirmed the experimental results. Both chromophores exhibited excellent two-photon absorption(TPA) properties in CH_(2)Cl_(2). Notably, T2 has more remarkable nonlinear optical absorption effects with the TPA cross-section up to 4.24 × 10~7GM. By adjusting the electronic structures of the chromophores through introducing pentafluorobenzene or N,N-dimethyl as functional groups with different electron-donating or withdrawing behaviors, the TPA performance of the small organic molecule could be greatly enhanced. These molecular structures with push-pull systems were excellent candidates for different two-photon applications.
基金Science and Technology Department of Henan Pro vince Fund Project(Grant No.144300510019)
文摘Lappaconitine is a water-insoluble drug, which was used as model drug in this study. Currently, two osmotically controlled delivery systems that are widely used for water-insoluble drug are monolithic osmotic tablet （MOT） and push-pull osmotic pump （PPOP）. In the present study, lappaconitine solid dispersion monolithic osmotic tablet （lappaconitine-SD-MOT） and lappaconitine-PPOP were developed. The prepared lappaconitine-PPOP was able to delivery drug at the rate of approximate zero-order （r = 0.9931）, and the cumulative release was above 95.0%. The lappaconitine-SD-MOT showed a comparatively poor linearity when the data were plotted according to the zero-order equation （r = 0.9798）, and the cumulative release was 84.69%. Lappaconitine-PPOP exhibited better controlled drug release （higher regression value） compared with lappaconitine-SD-MOT. The similarity index （f2） between lappaconitine-PPOP and lappaconitine-SD-MOT was 49.1 （〈50）. A clear difference of drug release characteristics between the lappaconitine-SD-MOT and lappaconitine-PPOP was revealed. It indicated that the drug release performance of lappaconitine-PPOP could gain favorable zero-order kinetics and higher cumulative release compared with lappaconitine-SD-MOT. Therefore, these results suggested that PPOP was still a very effective device for the delivery of poorly water-soluble drug with zero-order pattern.
基金the National Natural Science Foundation of China(No.60706011)the Doctoral Program for New Teachers of the Ministry of Education of China(No.20070183087)the State Key Development Program for Basic Research of China(No.2006CB302803)~~
文摘A polymer directional coupler （DC） electro-optic switch with push-pull electrodes and rib waveguides is designed based on the conformal transforming method, image method, coupled mode theory, and electro-optic modulation theory. Its structure and principle are described, the design and optimization are performed, and the characteristics are analyzed, including the coupling length, switching voltage, output power, insertion loss, and crosstalk. To realize normal switching function,the fabrication tolerance,wavelength shift, and coupling loss between a single mode fiber （SMF） and the waveguide are discussed. Simulation results show that the coupling length is 3082μm; the push-pull switching voltage is 2.14V;and the insertion loss and crosstalk are less than 1.14 and -30dB,respectively. The proposed analytical technique on waveguides and electrodes is proven to be accurate and computationally efficient when compared with the beam propa- gation method （BPM） and the experimental results.
