In this paper, for the measured surface with the characteristics of continuous radiation, we put forward the general model of the spectral emissivity with non- dimensional wavelength. In the analysis process, based on...In this paper, for the measured surface with the characteristics of continuous radiation, we put forward the general model of the spectral emissivity with non- dimensional wavelength. In the analysis process, based on the Taylor series expansion, we theoretically discuss the applicable conditions of the model. Further, introducing the concept of the non-correlative spectrum functions in colourometry, the principle of primary spectrum pyrometry is established. And the application of primary spectrum pyrometer is illustrated in a specific example.展开更多
Measuring the temperature and deformation synchronously at elevated temperatures is technically challenging and has become a major concern in the evaluation of mechanical properties. In this study, a simple, easy-to-i...Measuring the temperature and deformation synchronously at elevated temperatures is technically challenging and has become a major concern in the evaluation of mechanical properties. In this study, a simple, easy-to-implement, yet effective monochromatic pyrometry is established for non-contact and full-field temperature measurements, which can significantly reduce the error caused by the camera’s channel crosstalk that commonly occurs in the existing improved two-color method. In addition, hightemperature digital image correlation, combined with band-pass filtering and monochromatic illumination, is applied for deformation measurement. Subsequently, an experimental system was set up to validate the accuracy of the proposed method,which consists of a CCD camera for image capturing, a blue bandpass filter for radiation suppression, blue light irradiation for light compensation, and an infrared pyrometer for temperature recording. The results of the thermal heating experiment on the C/SiC sample proved that the selection of camera channel R in monochromatic pyrometry can reduce the error by channel crosstalk,and the proposed method is applicable for synchronous measurement of temperature and deformation.展开更多
An infrared colorimetric radiation thermometrical system was established based on the theory of optical radiation. The dynamic temperature history of fuel air explosive (FAE) was measured to obtain the temperature res...An infrared colorimetric radiation thermometrical system was established based on the theory of optical radiation. The dynamic temperature history of fuel air explosive (FAE) was measured to obtain the temperature responses of primary initiation FAE and secondary initiation FAE in real time. And the characteristics of their temperature history curves were compared and analyzed. The results show that the primary initiation FAE has higher explosion temperature and longer duration compared to the secondary initiation FAE.展开更多
A new technique is developed to measure the longitudinal thermal expansion coefficient of C/C composite material at high temperature. The measuring principle and components of the apparatus are described in detail. Th...A new technique is developed to measure the longitudinal thermal expansion coefficient of C/C composite material at high temperature. The measuring principle and components of the apparatus are described in detail. The calculation method is derived from the temperature dependence of the thermal expansion coefficient. The apparatus mainly consists of a high temperature environmental chamber, a power circuit of heating, two high-speed pyrometers, and a laser scanning system. A long solid specimen is resistively heated to a steady high-temperature state by a steady electrical current. The temperature profile of the specimen surface is not uniform because of the thermal conduction and radiation. The temperature profile and the total expansion are measured with a high-speed scanning pyrometer and a laser slit scanning measuring system, respectively. The thermal expansion coefficient in a wide temperature range （1000 - 3800 K） of the specimen can therefore be obtained. The perfect consistency between the present and previous results justifies the validity of this technique.展开更多
In the applications of primary spectrum pyrometry,based on the dynamic range and the minimum sensibility of the sensor,the application issues,such as the measurement range and the measurement partition,were investigat...In the applications of primary spectrum pyrometry,based on the dynamic range and the minimum sensibility of the sensor,the application issues,such as the measurement range and the measurement partition,were investigated through theoretical analyses. For a developed primary spectrum pyrometer,the theoretical predictions of measurement range and the distributions of measurement partition were presented through numerical simulations. And the measurement experiments of high-temperature blackbody and standard temperature lamp were processed to further verify the above theoretical analyses and numerical results. Therefore the research in the paper provides the helpful supports for the applications of primary spectrum pyrometer and other radiation pyrometers.展开更多
A technique is described for the dynamic measurement of selected thermophysical properties of electrically conducting solids in the temperature range from 1100 K to the melting point. Based on rapid resistive self-hea...A technique is described for the dynamic measurement of selected thermophysical properties of electrically conducting solids in the temperature range from 1100 K to the melting point. Based on rapid resistive self-heating of the specimen from room temperature to any desired high temperature in several seconds by the passage of an electical current pulse through it, this technique measures the pertinent quantities such as current, voltage, randiance temperature, with sub-millisecond time resolution. The pulse-heating technique is applied to strip specimens. The radiance temperature is measured by high-speed pyrometry, normal spectral emissivity of the strips is measured by integrating sphere reflectometry. The normal spectral emissivity results are used to compute the true temperature of the specimens. The heat capacity, electrical resistivity, total hemispherical emissivity are evaluated in the temperature range from 1100 K to the melting point.展开更多
A new technique is developed to measure the electrical resistivity of conductor with a nonuniform tem- perature profile. The calculation method is derived from the temperature dependence of the electrical resistivity....A new technique is developed to measure the electrical resistivity of conductor with a nonuniform tem- perature profile. The calculation method is derived from the temperature dependence of the electrical resistivity. The apparatus consists mainly of a high temperature environmental chamber, a power circuit of heating, a twenty-wavelength pyrometer, and a scanning pyrometer. After getting the resistance from the voltage drop of the specimen, the electrical resistivity in a wide temperature range of the specimen can be obtained by our calculation model. Preliminary results of the electrical resistivity of SRM 8424 over a wide temperature range （1000-3000 K） are presented. The perfect consistency between the measurement results and the nominal values justifies the validity of this technique.展开更多
基金This work was supported by the National Natural Science Foundation of China(Grant No.59006487)the Special Funds for Doctoral Program of Ministry of Education(Grant No.97035821)the Special Funds for Major Research of Department of Education of Anhui Province(Grant No.2001kj265zd).
文摘In this paper, for the measured surface with the characteristics of continuous radiation, we put forward the general model of the spectral emissivity with non- dimensional wavelength. In the analysis process, based on the Taylor series expansion, we theoretically discuss the applicable conditions of the model. Further, introducing the concept of the non-correlative spectrum functions in colourometry, the principle of primary spectrum pyrometry is established. And the application of primary spectrum pyrometer is illustrated in a specific example.
基金This work was supported by the National Natural Science Foundation of China(Grant Nos.11625207 and 11972326)the Fundamental Research Funds for the Central Universities(Grant No.2652019071)。
文摘Measuring the temperature and deformation synchronously at elevated temperatures is technically challenging and has become a major concern in the evaluation of mechanical properties. In this study, a simple, easy-to-implement, yet effective monochromatic pyrometry is established for non-contact and full-field temperature measurements, which can significantly reduce the error caused by the camera’s channel crosstalk that commonly occurs in the existing improved two-color method. In addition, hightemperature digital image correlation, combined with band-pass filtering and monochromatic illumination, is applied for deformation measurement. Subsequently, an experimental system was set up to validate the accuracy of the proposed method,which consists of a CCD camera for image capturing, a blue bandpass filter for radiation suppression, blue light irradiation for light compensation, and an infrared pyrometer for temperature recording. The results of the thermal heating experiment on the C/SiC sample proved that the selection of camera channel R in monochromatic pyrometry can reduce the error by channel crosstalk,and the proposed method is applicable for synchronous measurement of temperature and deformation.
基金Sponsored by the National Natural Science Foundation of China (10772032)
文摘An infrared colorimetric radiation thermometrical system was established based on the theory of optical radiation. The dynamic temperature history of fuel air explosive (FAE) was measured to obtain the temperature responses of primary initiation FAE and secondary initiation FAE in real time. And the characteristics of their temperature history curves were compared and analyzed. The results show that the primary initiation FAE has higher explosion temperature and longer duration compared to the secondary initiation FAE.
基金General Armament Department under Grant No.51312060201.
文摘A new technique is developed to measure the longitudinal thermal expansion coefficient of C/C composite material at high temperature. The measuring principle and components of the apparatus are described in detail. The calculation method is derived from the temperature dependence of the thermal expansion coefficient. The apparatus mainly consists of a high temperature environmental chamber, a power circuit of heating, two high-speed pyrometers, and a laser scanning system. A long solid specimen is resistively heated to a steady high-temperature state by a steady electrical current. The temperature profile of the specimen surface is not uniform because of the thermal conduction and radiation. The temperature profile and the total expansion are measured with a high-speed scanning pyrometer and a laser slit scanning measuring system, respectively. The thermal expansion coefficient in a wide temperature range （1000 - 3800 K） of the specimen can therefore be obtained. The perfect consistency between the present and previous results justifies the validity of this technique.
基金Supported by the National Natural Science Foundation of China (Grant Nos. 50606033 and 50674079)
文摘In the applications of primary spectrum pyrometry,based on the dynamic range and the minimum sensibility of the sensor,the application issues,such as the measurement range and the measurement partition,were investigated through theoretical analyses. For a developed primary spectrum pyrometer,the theoretical predictions of measurement range and the distributions of measurement partition were presented through numerical simulations. And the measurement experiments of high-temperature blackbody and standard temperature lamp were processed to further verify the above theoretical analyses and numerical results. Therefore the research in the paper provides the helpful supports for the applications of primary spectrum pyrometer and other radiation pyrometers.
基金This work was supported by the National Natural Science Foundation of China (No.50336010)the National Fund of Author of Most Excellent Doctoral Dissertation (No.199929)The authors gratefully acknowledge Dr.F.Righini,INRM,Italy,for the useful suggestions.
文摘A technique is described for the dynamic measurement of selected thermophysical properties of electrically conducting solids in the temperature range from 1100 K to the melting point. Based on rapid resistive self-heating of the specimen from room temperature to any desired high temperature in several seconds by the passage of an electical current pulse through it, this technique measures the pertinent quantities such as current, voltage, randiance temperature, with sub-millisecond time resolution. The pulse-heating technique is applied to strip specimens. The radiance temperature is measured by high-speed pyrometry, normal spectral emissivity of the strips is measured by integrating sphere reflectometry. The normal spectral emissivity results are used to compute the true temperature of the specimens. The heat capacity, electrical resistivity, total hemispherical emissivity are evaluated in the temperature range from 1100 K to the melting point.
基金supported by the General Armament Department under Grant No. 51312060201
文摘A new technique is developed to measure the electrical resistivity of conductor with a nonuniform tem- perature profile. The calculation method is derived from the temperature dependence of the electrical resistivity. The apparatus consists mainly of a high temperature environmental chamber, a power circuit of heating, a twenty-wavelength pyrometer, and a scanning pyrometer. After getting the resistance from the voltage drop of the specimen, the electrical resistivity in a wide temperature range of the specimen can be obtained by our calculation model. Preliminary results of the electrical resistivity of SRM 8424 over a wide temperature range （1000-3000 K） are presented. The perfect consistency between the measurement results and the nominal values justifies the validity of this technique.
