期刊文献+
共找到6篇文章
< 1 >
每页显示 20 50 100
粘胶后溶解QGB系列切割泵的研制与应用
1
作者 邵长金 田维娜 郎明才 《人造纤维》 2003年第4期9-12,共4页
介绍了用于粘胶后溶解过程的QGB系列切割泵的结构和工艺参数,以及QGB系列切割泵应用工艺流程和使用效果。
关键词 粘胶 后溶解 qgb系列 切割泵 研制 应用 结构 工艺参数
下载PDF
QGB50-32-160型离心泵
2
作者 李云虎 《农业机械》 1988年第5期15-15,共1页
受中央爱委会委托,中国农机院排灌所设计、辽宁新金县水泵厂试制的为农村饮用水成套设备配套的QGB50-32-160型离心泵,属于国家科委星火计划的内容,1988年元月通过部级鉴定。该泵执行了国际标准,能很好地满足新型气压供水设备的配套要求... 受中央爱委会委托,中国农机院排灌所设计、辽宁新金县水泵厂试制的为农村饮用水成套设备配套的QGB50-32-160型离心泵,属于国家科委星火计划的内容,1988年元月通过部级鉴定。该泵执行了国际标准,能很好地满足新型气压供水设备的配套要求,是我国广大农村、城镇供水需要的一种新型配套水泵。其效率高于国家机械委JB3550- 展开更多
关键词 气压供水设备 离心泵 叶片泵 qgb50-32-160
下载PDF
强骨宝2号对大鼠激素性骨质疏松影响的超微结构观察 被引量:2
3
作者 苏友新 乔永平 +2 位作者 刘献祥 张安桢 吴翊钦 《中国中医骨伤科杂志》 CAS 2002年第1期8-10,共3页
目的 :探讨强骨宝 2号防治激素性骨质疏症的作用机理。方法 :将 32只 SD大鼠随机分为 4组 ,每组 8只 ,一组为正常组 ;另 3组灌服醋酸泼尼松 ( 4 .5 mg/ kg)造成骨质疏松模型 ,从实验开始 ,分别灌服强骨宝2号、骨松宝等药。于第 1 3周处... 目的 :探讨强骨宝 2号防治激素性骨质疏症的作用机理。方法 :将 32只 SD大鼠随机分为 4组 ,每组 8只 ,一组为正常组 ;另 3组灌服醋酸泼尼松 ( 4 .5 mg/ kg)造成骨质疏松模型 ,从实验开始 ,分别灌服强骨宝2号、骨松宝等药。于第 1 3周处死 ,取第三腰椎进行透射电镜下超微结构的观察。结果 :模型组标本大多为吸收相、退变相及死亡的骨细胞 ,强骨宝组标本中的成骨相和吸收相的骨细胞数量基本处于平衡状态。结论 :从微观结构上来看 ,强骨宝 2号能够拮抗糖皮质激素所致的骨丢失。 展开更多
关键词 强骨宝2号 醋酸泼尼松 骨质疏松 超微结构 中医药疗法
下载PDF
预防风冷螺杆式压缩机高温的维护方法 被引量:1
4
作者 李名强 汤君 《天津科技》 2019年第1期62-64,69,共4页
阐述了风冷螺杆式压缩机压缩原理、冷却系统工艺流程和冷却原理,针对海洋恶劣环境,分析了海上采油平台空压机出现高温的12项主要原因:冷却换热器循环风机吹风量降低、散热器外部堵塞、隔声罩拆除或密封不严、环境温度过高、空气滤器堵... 阐述了风冷螺杆式压缩机压缩原理、冷却系统工艺流程和冷却原理,针对海洋恶劣环境,分析了海上采油平台空压机出现高温的12项主要原因:冷却换热器循环风机吹风量降低、散热器外部堵塞、隔声罩拆除或密封不严、环境温度过高、空气滤器堵塞、油滤器堵塞、储罐中压缩机油量不合理或油质不合格、热敏控制阀故障、检测仪表故障以及机头故障等,并提出相应的预防性维护方法,旨在为今后恶劣环境下空压机预防性维护提供参考依据,提高空压机维护质量,减少油田非计划关停,提高油田运行效益。 展开更多
关键词 压缩机 qgb 预防 高温 维护方法
下载PDF
浙江青田尚贵机械有限公司浙江青田油泵厂
5
《机电新产品导报》 2003年第1期97-97,共1页
关键词 浙江青田尚贵机械有限公司 浙江青田油泵厂 3qgb系列螺杆泵 QRY型系列导热油泵
下载PDF
Zircon U-Pb geochronological framework of Qitianling granite batholith, middle part of Nanling Range, South China 被引量:33
6
作者 ZHU JinChu WANG RuCheng +8 位作者 ZHANG PeiHua XIE CaiFu ZHANG WenLan ZHAO KuiDong XIE Lei YANG Ce CHE XuDong YU APeng WANG LuBin 《Science China Earth Sciences》 SCIE EI CAS 2009年第9期1279-1294,共16页
The Qitianling granite batholith (QGB) is located in the southern Hunan Province, middle part of the Nanling Range, South China. Its total exposure area is about 520 km2. Based on our 25 single grain zircon U-Pb age d... The Qitianling granite batholith (QGB) is located in the southern Hunan Province, middle part of the Nanling Range, South China. Its total exposure area is about 520 km2. Based on our 25 single grain zircon U-Pb age data and 7 published data as well as the geological, petrological, and space distribution characteristics, we conclude that QGB is an Early Yanshanian (Jurassic) multi-staged composite pluton. Its formation process can be subdivided into three major stages. The first stage, emplaced at 163―160 Ma with a peak at about 161 Ma, is mainly composed of hornblende-biotite monzonitic granites and locally biotite granites, and distributed in the eastern, northern, and western peripheral parts of the pluton. The second stage, emplaced at 157―153 Ma with a peak at 157―156 Ma, is mainly composed of biotite granites and locally containing hornblende, and distributed in the middle and southeastern parts of the pluton. The third stage, emplaced at 150―146 Ma with a peak at about 149 Ma, is mainly composed of fine-grained (locally porphyritic) biotite granites, and distributed in the middle-southern part of the pluton. Each stage can be further disintegrated into several granite bodies. The first two intrusive stages comprise the major phase of QGB, and the third intrusive stage comprises the additional phase. Many second stage fine-grained granite bosses and dykes intruded into the first stage host granites with clear chilling margin-baking phenomena at their intrusive contacts. They were emplaced in the open fracture space of the earlier stage consolidated rocks. Their isotopic ages are mostly 2―6 Ma younger than their hosts. Conceivably, the time interval from magma emplacement, through cooling, crystallization, solidification, up to fracturing of the earlier stage granites cannot exceed 2―6 Ma. During the Middle-Late Jurassic in the Qitianling area and neighboring Nanling Range, the coeval granitic and basic-intermediate magmatic activities were widely developed. It indicates that the Early Yanshanian period was the culmination time of magmatic activities in this region. The Nanling Range was under a post-orogenic, intracontinental geotectonic environment with an obvious lithospheric extension and thinning. The crust-mantle interaction played an important role in formation of granitic rocks in this region. 展开更多
关键词 NANLING RANGE Qitianling GRANITE BATHOLITH (qgb) zircon U-PB dating intrusion stages GRANITE body DISINTEGRATION
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部