Damage caused due to low-velocity impacts in composites leads to substantial deterioration in their residual strength and eventually provokes structural failure.This work presents an experimental investigation on the ...Damage caused due to low-velocity impacts in composites leads to substantial deterioration in their residual strength and eventually provokes structural failure.This work presents an experimental investigation on the effects of different patch and parent laminate stacking sequences on the enhancement of impact strength of Carbon Fiber Reinforced Polymers(CFRP)composites by utilising the adhesively bonded external patch repair technique.Damage evolution study is also performed with the aid of Acoustic Emission(AE).Two different quasi-isotropic configurations were selected for the parent laminate,viz.,[45°/45°/0°/0°]s and[45°/0°/45°/0°]s.Quasi Static Indentation(QSI)test was performed on both the pristine laminates,and damage areas were detected by using the C-scan inspection technique.Damaged laminates were repaired by using a single-sided patch of two different configurations,viz.,[45°/45°/45°/45°]and[45°/0°/0°/45°],and employing a circular plug to fill the damaged hole.Four different combinations of repaired laminates with two configurations of each parent and patch laminate were produced,which were further subjected to the QSI test.The results reveal the effectiveness of the repair method,as all the repaired laminates show higher impact resistance compared to the respective pristine laminates.Patches of[45°/0°/0°/45°]configuration when repaired by taking[45°/45°/0°/0°]s and[45°/0°/45°/0°]s as parents exhibited 68%and 73%higher peak loads,respectively,than the respective pristine laminates.Furthermore,parent and patch of configuration[45°/0°/45°/0°]s and[45°/0°/0°/45°],respectively,attain the highest peak load,whereas[45°/45°/0°/0°]s and[45°/45°/45°/45°]combinations possess the most gradual decrease in the load.展开更多
We present a quantum secure imaging(QSI) scheme based on the phase encoding and weak+vacuum decoy-state BB84 protocol of quantum key distribution(QKD). It allows us to implement a computational ghost imaging(CGI) syst...We present a quantum secure imaging(QSI) scheme based on the phase encoding and weak+vacuum decoy-state BB84 protocol of quantum key distribution(QKD). It allows us to implement a computational ghost imaging(CGI) system with more simplified equipment and reconstructed algorithm by using a digital micro-mirror device(DMD) to preset the specific spatial distribution of the light intensity. What is more, the quantum bit error rate(QBER) and the secure key rate analytical functions of QKD are used to see through the intercept-resend jamming attacks and ensure the authenticity of the imaging information. In the experiment, we obtained the image of the object quickly and efficiently by measuring the signal photon counts with a single-photon detector(SPD), and achieved a secure key rate of 571.0 bps and a secure QBER of 3.99%, which is well below the lower bound of QBER of 14.51%. Besides, our imaging system uses a laser with invisible wavelength of 1550 nm, whose intensity is as low as single-photon, that can realize weak-light imaging and is immune to the stray light or air turbulence, thus it will become a better choice for quantum security radar against intercept-resend jamming attacks.展开更多
Purpose: This study aimed to examine whether the signal-to-noise ratio (SNR) could be increased by combining integrated slice-by-slice shimming (iShim) with a fat suppression (FS) method other than short-tau inversion...Purpose: This study aimed to examine whether the signal-to-noise ratio (SNR) could be increased by combining integrated slice-by-slice shimming (iShim) with a fat suppression (FS) method other than short-tau inversion recovery (STIR) in diffusion-weighted imaging (DWI) and q-space imaging (qsi). Methods: We acquired DWI images (b-values: 0 and nine steps from 400 to 10,000 s/mm2 for six axes) using a prototypical single-shot echo planar imaging sequence by combining two types of shimming (3D Shim and iShim) and two types of FS (STIR and water excitation [WE]) in 10 volunteers. In the DWI study, the SNR for each b-value, FS effect in the b0 image, and distortion in the added image (b0 - b10,000) were evaluated for the above-mentioned four imaging methods. qsi involved original DWI images. In the qsi study, the SNR was evaluated. Results: With regard to both 3D Shim and iShim, the SNRs were significantly higher when using WE than when using STIR in b0 - b900 images (p Conclusion: The combination of iShim and WE has a high SNR on qsi.展开更多
基金the financial support by the Council of Scientific&Industrial Research(CSIR)-Research Scheme,India(22/0809/2019-EMR-II)。
文摘Damage caused due to low-velocity impacts in composites leads to substantial deterioration in their residual strength and eventually provokes structural failure.This work presents an experimental investigation on the effects of different patch and parent laminate stacking sequences on the enhancement of impact strength of Carbon Fiber Reinforced Polymers(CFRP)composites by utilising the adhesively bonded external patch repair technique.Damage evolution study is also performed with the aid of Acoustic Emission(AE).Two different quasi-isotropic configurations were selected for the parent laminate,viz.,[45°/45°/0°/0°]s and[45°/0°/45°/0°]s.Quasi Static Indentation(QSI)test was performed on both the pristine laminates,and damage areas were detected by using the C-scan inspection technique.Damaged laminates were repaired by using a single-sided patch of two different configurations,viz.,[45°/45°/45°/45°]and[45°/0°/0°/45°],and employing a circular plug to fill the damaged hole.Four different combinations of repaired laminates with two configurations of each parent and patch laminate were produced,which were further subjected to the QSI test.The results reveal the effectiveness of the repair method,as all the repaired laminates show higher impact resistance compared to the respective pristine laminates.Patches of[45°/0°/0°/45°]configuration when repaired by taking[45°/45°/0°/0°]s and[45°/0°/45°/0°]s as parents exhibited 68%and 73%higher peak loads,respectively,than the respective pristine laminates.Furthermore,parent and patch of configuration[45°/0°/45°/0°]s and[45°/0°/0°/45°],respectively,attain the highest peak load,whereas[45°/45°/0°/0°]s and[45°/45°/45°/45°]combinations possess the most gradual decrease in the load.
文摘We present a quantum secure imaging(QSI) scheme based on the phase encoding and weak+vacuum decoy-state BB84 protocol of quantum key distribution(QKD). It allows us to implement a computational ghost imaging(CGI) system with more simplified equipment and reconstructed algorithm by using a digital micro-mirror device(DMD) to preset the specific spatial distribution of the light intensity. What is more, the quantum bit error rate(QBER) and the secure key rate analytical functions of QKD are used to see through the intercept-resend jamming attacks and ensure the authenticity of the imaging information. In the experiment, we obtained the image of the object quickly and efficiently by measuring the signal photon counts with a single-photon detector(SPD), and achieved a secure key rate of 571.0 bps and a secure QBER of 3.99%, which is well below the lower bound of QBER of 14.51%. Besides, our imaging system uses a laser with invisible wavelength of 1550 nm, whose intensity is as low as single-photon, that can realize weak-light imaging and is immune to the stray light or air turbulence, thus it will become a better choice for quantum security radar against intercept-resend jamming attacks.
文摘Purpose: This study aimed to examine whether the signal-to-noise ratio (SNR) could be increased by combining integrated slice-by-slice shimming (iShim) with a fat suppression (FS) method other than short-tau inversion recovery (STIR) in diffusion-weighted imaging (DWI) and q-space imaging (qsi). Methods: We acquired DWI images (b-values: 0 and nine steps from 400 to 10,000 s/mm2 for six axes) using a prototypical single-shot echo planar imaging sequence by combining two types of shimming (3D Shim and iShim) and two types of FS (STIR and water excitation [WE]) in 10 volunteers. In the DWI study, the SNR for each b-value, FS effect in the b0 image, and distortion in the added image (b0 - b10,000) were evaluated for the above-mentioned four imaging methods. qsi involved original DWI images. In the qsi study, the SNR was evaluated. Results: With regard to both 3D Shim and iShim, the SNRs were significantly higher when using WE than when using STIR in b0 - b900 images (p Conclusion: The combination of iShim and WE has a high SNR on qsi.
