A Quantitative Method for Evaluating the Transporting Capacity of Oil-Source Faults in Shallow Formation of Oil-Rich Sags

Objective Oil-source faults have an important effect on reservoir formation and distribution in shallow formations with non- hydrocarbon generation in oil-rich fault-related basins （Jiang Youlu et al., 2015）. However, the fault transporting capacity cannot be evaluated quantitatively at present. Taking the Zhanhua Sag in the Bohai Bay Basin as an example, this work analyzed the factors influencing the transporting capacity of the oil-source faults and proposed a quantitative method for evaluating their transporting capacity.

Determination of Consistency between Quantitative Evaluation and Non-quantitative Evaluation

The combination of quantitative evaluation(QE)and non-quantitative evaluation(NQE)is an important evaluation tool in the fields of academic level evaluation(e.g.,EasyChair,Academic paper review form)and internet commodity evaluation(e.g.,Amazon’s review,Feedback).But the inconsistency between QE and NQE greatly reduces the correctness and usability of the evaluation.Therefore,it is a necessary task to judge whether QE is consistent with NQE.In this paper,the predicate formula satisfiability problem is firstly reduced in polynomial time to the consistency problem of QE and NQE,and the uncertainty of the consistency problem is proved.Then the approximate solution to the problem is investigated by using a natural language processing method,which performs sentiment analysis on NQE and finally invokes a database query statement to determine whether QE is consistent with NQE.The results shed light on the feasibility of using the natural language processing method to solve undecidable problems.

Method for evaluation of geological strength index of carbonate cliff rocks:Coupled hyperspectral-digital borehole image technique

The deterioration of unstable rock mass raised interest in evaluating rock mass quality.However,the traditional evaluation method for the geological strength index(GSI)primarily emphasizes the rock structure and characteristics of discontinuities.It ignores the influence of mineral composition and shows a deficiency in assessing the integrity coefficient.In this context,hyperspectral imaging and digital panoramic borehole camera technologies are applied to analyze the mineral content and integrity of rock mass.Based on the carbonate mineral content and fissure area ratio,the strength reduction factor and integrity coefficient are calculated to improve the GSI evaluation method.According to the results of mineral classification and fissure identification,the strength reduction factor and integrity coefficient increase with the depth of rock mass.The rock mass GSI calculated by the improved method is mainly concentrated between 40 and 60,which is close to the calculation results of the traditional method.The GSI error rates obtained by the two methods are mostly less than 10%,indicating the rationality of the hyperspectral-digital borehole image coupled evaluation method.Moreover,the sensitivity of the fissure area ratio(Sr)to GSI is greater than that of the strength reduction factor(a),which means the proposed GSI is suitable for rocks with significant fissure development.The improved method reduces the influence of subjective factors and provides a reliable index for the deterioration evaluation of rock mass.

Analysis of System Value Evolution Trends of Energy Storage in Decarbonization Process

With the continuous expansion of the scale of renewable energy installation,the demand for energy storage has increased significantly.However,there are significant differences in the value of energy storage in different scenarios,and the phenomenon of diminishing marginal benefits of energy storage is becoming more apparent.Therefore,themulti-dimensional value evolution trend of energy storage has become a key issue.This study selects indicators from three dimensions of energy storage:low-carbon emission reduction,smoothing wind and solar power fluctuations,and saving generation costs,quantifying the economic,environmental,and technical values of energy storage.This forms a quantitative evaluation system for energy storage value.By comparing the calculated system values under different energy storage capacities,the marginal value evolution trend of energy storage is obtained.Meanwhile,considering factors such as the utilization rate of renewable energy,the change in energy storage value under different scenarios is analyzed.The results show that the value of long-duration energy storage is significantly affected by the energy storage capacity.Specifically,when the charge-discharge efficiency of longduration energy storage reaches 0.6 or above,the system value increases significantly.Additionally,appropriately reducing the cost of energy storage capacity also helps to improve its system value.

The Application of Digital Optical 3D Image Analyzer Evaskin in The Evaluation of Wrinkles

To verify the effectiveness of digital optical 3D image analyzer EvaSKIN in the objective and quantitative evaluation of wrinkles.A total of 115 subjects were recruited,the facial images of the subjects were collected by digital optical 3D image analyzer and manual camera,the changes of crow’s feet with age were analyzed.Pictures obtained by manual photography can be directly used for observation and preliminary grading of wrinkles.However,the requirements for evaluators are high,and the results are prone to errors,which will affect the accuracy of the evaluation.Therefore,skilled raters are needed.Compared with the manual photography method,the digital optical 3D image analyzer EvaSKIN can realize three-dimensional extraction of wrinkles,and obtain the change trend of crow’s feet with age.20~30 years old,wrinkles begin to appear slowly;wrinkles will increase rapidly at the age of 30~50;The length of 50~60 year old wrinkles is basically fixed,the wrinkles develop longitudewise,gradually widen and deepen,and the area,depth and volume increase is obvious,and the skin aging condition is intensified.the digital optical 3D image analyzer EvaSKIN realizes the 3D extraction of wrinkles,quantifies the circumference,area,average depth,maximum depth and volume of wrinkles,realizes the objective and quantitative evaluation of wrinkle state,is more accurate in the measurement of wrinkles,and provides a new instrument and method for the evaluation of wrinkles.it is a perfect and supplement to the traditional evaluation methods,and to a certain extent,it helps the research and development and evaluation institutions of cosmetics to obtain more abundant and three-dimensional data support.

Quantitative evaluation methods for waterflooded layers of conglomerate reservoir based on well logging data

The rapid changing near source, multi-stream depositional environment of conglomerate reservoirs leads to severe heterogeneity, complex lithology and physical properties, and large changes of oil layer resistivity. Quantitative evaluation of water-flooded layers has become an important but difficult focus for secondary development of oilfields. In this paper, based on the analysis of current problems in quantitative evaluation of water-flooded layers, the Kexia Group conglomerate reservoir of the Sixth District in the Karamay Oilfield was studied. Eight types of conglomerate reservoir lithology were identified effectively by a data mining method combined with the data from sealed coring wells, and then a multi-parameter model for quantitative evaluation of the water-flooded layers of the main oil-bearing lithology was developed. Water production rate, oil saturation and oil productivity index were selected as the characteristic parameters for quantitative evaluation of water-flooded layers of conglomerate reservoirs. Finally, quantitative evaluation criteria and identification rules for water-flooded layers of main oil-bearing lithology formed by integration of the three characteristic parameters of water-flooded layer and undisturbed formation resistivity. This method has been used in evaluation of the water-flooded layers of a conglomerate reservoir in the Karamay Oilfield and achieved good results, improving the interpretation accuracy and compliance rate. It will provide technical support for avoiding perforation of high water-bearing layers and for adjustment of developmental programs.

Evaluation of the weakening behavior of gas on the coal strength and its quantitative influence on the coal deformation

The coal strength and deformation properties are key factors affecting safe coal mining and highefficiency coalbed methane(CBM)development.In this paper,reconstituted coal samples are chosen to investigate the weakening behavior of gas on coal strength,meanwhile,its effects on coal deformation are quantitatively evaluated.The results indicate that the weakening degree of gas on coal strength is closely related to the confining stress and gas pressure.Compared with non-gas-saturated coals,the maximum weakening ratios of adsorbed gas to coal strength are 10.58%,18.12%,8.55%and 14.65%under the conditions of confining stress CS=3 MPa and gas pressure GP=1 MPa,CS=3 MPa and GP=2 MPa,CS=4 MPa and GP=1 MPa,and CS=4 MPa and GP=2 MPa,respectively.Furthermore,the maximum weakening ratios of free gas to coal strength are 18.27%,36.54%,14.79%and 29.58%,respectively,under above four conditions.The maximum coal bulk strain decreases as particle sizes of coal powders increase,and it has a maximum value of 0.0227 and a minimum value of 0.0191 in particle size ranges of 0.01–0.041 and 0.5–1 mm.Under the same conditions,the coal bulk strain increases with increasing gas pressure,revealing that coal deformation properties can be enhanced by gas.

Quantitative evaluation of soil erosion of land subsided by coal mining using RUSLE

Based on a RUSLE model, we identified the key factors of the impact on soil erosion induced by coal min- ing subsidence. We designed a method for predicting/.S factors of a mining subsidence basin, using ana- lytical GIS spatial technology. Using the Huainan mining area as an example, we calculated the modulus of erosion, its volume and classified the grade of soil erosion for both the original area and the subsidence basin. The results show that the maximum modulus of erosion and the volume of erosion of the subsi- dence basin without water logging would increase by 78% and 23% respectively compared with the ori- ginal situation. The edge of the subsidence basin, where the land subsidence was uneven, is subject to the greatest acceleration in soil erosion. In the situation of water logging after subsidence, the maximum modulus of erosion would decrease if the accumulated slope length were reduced. This maximum mod- ulus around the water logged area within the subsidence basin is equal to that without water logging, while the total volume of erosion decreases. Therefore, mining subsidence aggravates soil erosion espe- cially at the edge of basins where water and soil conservation measures should be taken.

Quantitative evaluation and spatial differentiation of eco-environmental livability in Zhejiang Province, China

The scientific analyses of the spatial patterns of regional eco-environment livability,along with the explorations of the correlations between ecoenvironments and population and economic activity distributions,are of major significance in the guidance of the coordinated development between social economies,natural resources,and environments.In this study,the topography,climate,hydrology,land cover,air quality,and the dangers presented by natural hazards in the study area were investigated in order to establish an evaluation model for the regional eco-environmental livability.Then,the observed spatial patterns and regional differences in the eco-environmental livability,as well as their relationships with the distributions of population and economic activities in Zhejiang Province,were investigated.The results showed that the ecoenvironmental livability in Zhejiang Province displayed a gradual decreasing trend from southwest to northeast,as well as from the mountains to the hills,valleys,and plains areas.During the compartmentalization of the eco-environmental livability,it was observed that the lowest livable area covered the largest population,accounting for approximately 29.64%of the total population in the study area.The higher livable areas covered the widest land areas,accounting for approximately 26.15%of the total area.Moreover,it was found that the eco-environmental livability in the mountain areas was higher than that in the plain areas in Zhejiang Province.Furthermore,the ecoenvironmental livability was found to have a significant exponential relationship with the population and GDP densities of Zhejiang Province,with the R^2 of the curve-fittings reaching 0.835 and 0.656,respectively.However,it was determined that the coefficient of the exponential function was negative,which indicated that a strong negative relationship existed between the eco-environmental livability and densities of the population and economic activities.It was assumed that the impacts of anthropogenic factors were the fundamental causes of this negative correlation.This study introduced two new factors(air quality and natural hazards)into the evaluation framework of eco-environmental livability.As a result,a more comprehensive model was established for the evaluation of eco-environmenta livability in certain segments of the study area Additionally,the correlation between ecoenvironment livability and human activities was discussed in-depth,which can potentially provide theoretical and practical guidance for the implementation of eco-livability in China,and possibly even those of other vast developing countries.

Quantitative evaluation of multi-process collaborative operation in steelmaking–continuous casting sections

The quantitative evaluation of multi-process collaborative operation is of great significance for the improvement of production planning and scheduling in steelmaking–continuous casting sections(SCCSs). However, this evaluation is difficult since it relies on an in-depth understanding of the operating mechanism of SCCSs, and few existing methods can be used to conduct the evaluation, due to the lack of full-scale consideration of the multiple factors related to the production operation. In this study, three quantitative models were developed, and the multiprocess collaborative operation level was evaluated through the laminar-flow operation degree, the process matching degree, and the scheduling strategy availability degree. Based on the evaluation models for the laminar-flow operation and process matching levels, this study investigated the production status of two steelmaking plants, plants A and B, based on actual production data. The average laminar-flow operation(process matching) degrees of SCCSs were obtained as 0.638(0.610) and 1.000(0.759) for plants A and B, respectively, for the period of April to July 2019. Then, a scheduling strategy based on the optimization of the furnace-caster coordinating mode was suggested for plant A. Simulation experiments showed higher availability than the greedy-based and manual strategies. After the proposed scheduling strategy was applied,the average process matching degree of the SCCS of plant A increased by 4.6% for the period of September to November 2019. The multi-process collaborative operation level was improved with fewer adjustments and interruptions in casting.

A quantitative model for danger degree evaluation of staged operation of earth dam reservoir in flood season and its application

Based on the natural disaster risk evaluation mode, a quantitative danger degree evaluation model was developed to evaluate the danger degree of earth dam reservoir staged operation in the flood season. A formula for the overtopping risk rate of the earth dam reservoir staged operation was established, with consideration of the joint effect of flood and wind waves in the flood sub-seasons with the Monte Carlo method, and the integrated overtopping risk rate for the whole flood season was obtained via the total probability approach. A composite normalized function was used to transform the dam overtopping risk rate into the danger degree, on a scale of 0-1. Danger degree gradating criteria were divided by four significant characteristic values of the dam overtopping rate, and corresponding guidelines for danger evaluation are explained in detail in this paper. Examples indicated that the dam overtopping danger degree of the Chengbihe Reservoir in China was 0.33-0.57, within the range of moderate danger level, and the flood-limiting water level （FLWL） can be adjusted to 185.00 m for the early and main flood seasons, and 185.00-187.50 m for the late flood season. The proposed quantitative model offers a theoretical basis for determination of the value of the danger degree of an earth dam reservoir under normal operation as well as the optimal scheduling scheme for the reservoir in each stage of the flood season.

Synthetically quantitative evaluation function of characteristic parameters on CO_2 arc welding process

The statistical probability and their variation regularity of the measurable characteristic parameters in the CO 2 arc welding droplet short circuiting transfer process have been studied. The statistical analysis shows that the sensitivity of each characteristic parameter with regard to the variation of the short circuiting transfer process is different. The sensitivity of 4 kinds among these characteristic parameters is more intense than that of the short circuiting transfer frequency. In order to take account of the synthetic influence of these characteristic parameters, by means of the characteristic parameters synthetic value, a quantitative evaluation function is built up to describe and evaluate the short circuiting transfer process of CO 2 arc welding in real time. The testing shows that the evaluation function can give a suitable synthetic valuation for the short circuiting transfer process with a variety of welding variables.

The Quantitative Evaluation of Output Efficiency in Different Cropping Patterns

Quantitative indexes such as land equivalent ratio, yield equivalent and value of output equivalent were used to evaluate output efficiencies of different cropping patterns, i.e., sequential cropping, intercrops and crop rotation. Compared to single cropping, land use efficiencies under sequential cropping, intercrops and crop rotation were raised by 62, 38 and 21%, respectively. The unit area yield under sequential cropping, intercrops and crop rotation were raised by 63, 29 and 16%, respectively. The unit area value was also enhanced under sequential cropping and intercrops, 76 and 35% higher than that under single cropping. The paper provides a useful tool for comparing farm output efficiency and build up a theoretical basis for further research on output efficiency of various cropping patterns in the future.

A Method for Vulnerability Database Quantitative Evaluation

During system development,implementation and operation,vulnerability database technique is necessary to system security;there are many vulnerability databases but a lack of quality standardization and general evaluation method are needed.this paper summarized current international popular vulnerability databases,systematically introduced the present situation of current vulnerability databases,and found the problems of vulnerability database technology,extracted common metrics by analyzing vulnerability data of current popular vulnerability databases,introduced 4 measure indexes:the number scale of vulnerabilities,the independence level,the standardization degree and the integrity of vulnerability description,proposed a method for vulnerability database quantitative evaluation using SCAP protocol and corresponding standard,analyzed a large number of vulnerabilities in current popular vulnerability database,quantitative evaluated vulnerability database by the law of normal distribution,the experimental results show this method has strong versatility and science,and it is beneficial to improve the quality and standardization construction for vulnerability database development.

Quantitative evaluation of sustainable development based on ecological footprint method: a case study of Tianjin

Since the coneept of sustainable devetopment emerged in the late 1980s, more and more countries and regions have been utilizing sustainable development as their developing stratety. But decades have passed without any effective methods available to quantitatively assess sustainable development. Since the ecological footprint evaluation method initiated in 1992, it has become popular in quantitative assessment of sustainable development because of its convenience, easy-understanding, and rehability. As one of the biggest coastal cities in north China and the economic center of the Bohai Coastal Region, Tianjin＇s gross domestic product （GDP） was 369. 762 billion yuan in 2005, accounting for 2.0°of the whole nation＇s GDP. The paper analyzes Tianjin＇s development with the ecological footprint method, and the results show that Tianjin＇s ecoiogical footprint and biocapacity in 2005 were 2.507gha/cap and 0.2 76gha/cap respectively. The ecological deficit was 2.230gha/cap.And from 1980 to 2005,Tianjin＇s ecological deficit per 10^4 yuan GDP decreased;while per capita ecological deficit has been tending to increase rapidly in recent years.All these result demonstrate that Tianjin is in a state of unsustainable development.

Evaluation of quantitative variation of secondary metabolites in Bergenia ciliata(Haw.)using high performance thin layer chromatography

Dear Editor： Therapeutically active metabolite contents in a med- icinal plant vary in nature, which may impact on its therapeutic efficacy. Bergenia （Saxifragaceae） is an evergreen perennial herb widely distributed in Central and East Asia with about 30 species reported worldwide. It grows at a range of altitudes from the Khasia hills at 400 feet to the temperate Himalayas from Kashmir to Bhutan at 7,000-10,000 feet. Its distribution over a wide range of altitudinal zones makes it a good candidate for studying variations in its metabolic profiles under different climatic conditions. Bergenin （C-glycoside of 4-O-methyl gallic acid） has been identified as a potent active secondary metabolite in Bergenia and other therapeutically active constituents including, among others, gallic acid （3,4,5 trihydroxybenzoic acid）, （＋） catechin, and gallicin （Fig. 1）.

Quantitative Evaluation of Sea-ice Disaster in Bohai Sea Based on GOCI and Sentinel-1

The Circum-Bohai-Sea Region is an important economic zone of China.The sea ice,which occurs at each winter,is the major marine hazard of the Bohai Sea.As a result,it is very important to evaluate the damage effects quantitatively in this region,which is seldom studied and analyzed systematically using long-time-series data.In this paper,the sea-ice disaster in the Bohai Sea is evaluated quantitatively based on the Sentinel-1 and GOCI.For different hazard-bearing bodies of the marine transportation and the offshore constructions,different sea-ice-hazard indexes are defined,which can be applied to analyze the sea-ice disaster quantitatively in the Bohai Sea,including the annual and inter-annual variations in the period from 2011 to 2017.The analysis results can provide the reference of the sea-ice monitoring in the Bohai Sea.

Quantitative Evaluation of Ecological Cumulative Effects and Zoning Regulations for Prefectural Mining Units in China

Although the development of energy and mineral resources strongly supports China’s rapid industrialization and urbanization,it has led to a series of ecological and environmental problems.Strengthening the spatial regulation considering the ecological and environmental protection on energy and mineral resource development areas is an important aspect of realizing China’s sustainable development.In this study,we mapped,categorized,and analyzed the ecological cumulative effects of the Chinese 134 prefectural mining units based on the pressure-state-response model,which is demonstrated as impact of mining activities on ecological environment,ecological environmental fragility,and ecological function.This investigation developed a stress zoning typology of the mining units based on scores of three dimensions of the ecological cumulative effects and classified 134 prefectural mining units into eight types of stress zones.A series of regulation and policy suggestions have been proposed to different types of zones from three aspects:space control,intensity control,and development mode control.The application of this evaluation and spatial zoning system will contribute to the refined spatial management of China’s mining areas.

Quantitative Evaluation on Wetland Ecosystem Service Function in Chao Lake

[Objective] The aim was to better reveal the type of ecosystem service function of wetlands in Chao Lake and provide references for protection and man- agement, restoration and rebuilding of local wetland ecosystem. [Method] The val- ues of ecosystem function was estimated by market value method, opportunity cost approach, replacement cost method, shadow engineering approach, travel cost method, hedonic pricing method and contingent value method. [Result] With wetland ecosystem service function value totals 4.968 billion yuan, the value of eco-environ- ment regulation and maintenance was the highest, followed by the value of cultural and social function. The value of material production was the least. The values of sub-functions can be concluded by comparison of service function va}ue and pro- portions, as follows： flood mitigation 〉water purification 〉water conservation 〉 tourism＆leisure〉material production〉scientific research and education〉water supply〉 biodiversity maintenance〉regulation on atmosphere constituents. [Conclusion] The re- search performed quantitative evaluations on ecosystem service function values of wetlands in Chao Lake and is of significance for specific development and protec- tion of local wetlands.

Quantitative Seismic Risk Evaluation on Blind Faults in Offshore Areas of Tianjin,China

Based on faults surveying and research data in the Tianjin offshore areas,through studying tectonic structure,Quaternary activity,deep structure,stress and strain fields and seismicity in the Tianjin offshore areas,the activity and tectonic features of the faults are determined synthetically.Using seismo-geological data,and the historical and modern seismicity data,the frequency-magnitude relationship model normalized by 500a is established and based on the relationship between the upper limit of maximum magnitude M u and a t/b,the maximum magnitudes of the sea section of the Haihe river fault and the Haiyi fault are calculated.Then Poisson probability model is adopted and the quantitative parameters,such as the maximum magnitude,occurrence probability,recurrence cycle of the faults in the south Tianjin offshore areas in the coming 50～200a,are calculated.