Characters of fluid inclusions in quartz veins in pyroclastic rock of Budate Group, Hailar Basin

It was adopted that the fluorescence microscope, Gas-Flow Heating/Freezing System, Laser-Raman Spect-roscopy, etc. are the multimedia techniques for analysing fluid inclusions of quartz veins in Budate Group, Hailar Basin. The results show that fluid inclusions in quartz veins are small(1～5 μm)monophase, two-phase(liquid+vapour)aqueous inclusions; the two-phase aqueous inclusions homogeniese to the liquid phase between 120～180℃, two dominant types for oil inclusions were determined in quartz veins:① the primary inclusions, almostly gas, measurement by Laser-Raman Spectroscopy show that both gas phase are enriched in CH4(94.50%～99.25%)and C6H6(0.75%～2.70%), under these conditions, inclusions may have come from juvenile fliud followingly the quartz veins formation. While the quartz veins exhibiting different striking luminescence has been proved by cathodoluminescence, it would be impossible to come from the deep magmas and strata. ② aqueous, liquid and two-phase(liquid+vapour)oil inclusions, belong to secondary hydrocarbon inclusions. The oil inclusions of this stage represent mainly the large scale of oil accumulation, located within the quartz microfracture.

U-Pb SHRIMP Dating of Zircon from Quartz Veins of the Yangshan Gold Deposit in Gansu Province and Its Geological Significance

The Yangshan gold deposit is a super-large fine-grained disseminated gold deposit located in southern Gansu Province. Its metallogenic age has been determined by using the cathodoluminescence image and ion probe U-Pb dating techniques. It is found that zircons from quartz veinlet of the fine-grained disseminated gold ore show characters of magmatic origin with prism idiomorphism, oscillatory zoning and dominant Th/U ratios of 0.5-1.5. Three main populations of zircons are obtained, giving average 206Pb/238U ages of 197.6±1.7 Ma, 126.9±3.2 Ma and 51.2±1.3 Ma respectively. The first age corresponds to the K-Ar age of the plagiogranite dike, while the latter two ages indicate that buried Cretaceous and Tertiary intrusives exist in the orefield, suggesting that the Yangshan gold deposit was genetically related to the three magmatic hydrothermal activities. By contrast, zircons from coarse gold-bearing quartz vein in the mining area are much older than the host rock, indicating that the vein was formed earlier and was not contaminated by later magmatic fluids. It is concluded that the coupling of multiperiodic hydrothermal activities in the mining area has contributed a lot to mineralization of the Yangshan gold deposit.

Isotopic Chronological Study of the Huangsha-Tieshanlong Quartz Vein-Type Tungsten Deposit and Timescale of Molybdenum Mineralization in Southern Jiangxi Province,China

The Huangsha-Tieshanlong quartz-vein tungsten polymetallic ore deposit, located in the northern Pangushan-Tieshanlong tungsten ore field in eastern Ganxian-Yudu prospecting areas of the Yushan metallogenic belt, is a well-known tungsten deposit in southern Jiangxi province, China. SHRIMP-determined dating of zircons from the Tieshanlong granite yields ages of 168.1±2.1 Ma （n=11, MSWD-1.3）. Rhenium and osmium isotopic dating of molybdenite from the Huangsha quartz-vein tungsten deposit determined by ICP-MS yields a weighted average ages of 153-3 Ma and model ages of 150.22.1 Ma - 155.4-2.3 Ma. The age of the Huangsha tungsten deposit is 10 to 15 Ma later than the Tieshanlong granite, which shows that there might have been another early Late Jurassic magmatic activity between 150 and 160 Ma, a process which is closely related with tungsten mineralization in this area. The Tieshanlong granite, the Hnangsha tungsten deposit and the Pangushan-Tieshanlong ore field were all formed around 150-170 Ma, belonging to products of a Mesozoic second large-scale mineralization. According to the collected molybdenite Re-Os dating results in southern Jiangxi province, the timescale of the associated molybdenum mineralization is 2-6 Ma in the tungsten deposit and the timescale of independent molybdenum mineralization is 1-4 Ma, implying the complexity of tungsten mineralization. Times of molybdenum mineralization are mainly concentrated in the Yanshanian, which includes three stages of 133-135 Ma, 150-162 Ma, and 166-170 Ma, respectively. The 150-162 Ma-stage is in accordance with ages of large-scale WoSn mineralization, which is mainly molybdenum mineralization characterized by associated molybdenum mineralization with development of an even greater-intensity independent molybdenum mineralization. Independent molybdenum mineralization occurred before and after large-scale W-Sn mineralization, which indicates that favorable prospecting period for molybdenum may be in Cretaceous and early late Jurassic.

Subduction channel fluid-rock interaction:Indications from rutile-quartz veins within eclogite from the Yuka terrane,North Qaidam orogen

High-pressure(HP)or ultrahigh-pressure(UHP)rutile-quartz veins that form at mantle depths due to fluid-rock interaction can be used to trace the properties and behavior of natural fluids in subduction zones.To explore the fluid flow and the associated element mobility during deep subduction and exhumation of the continental crust,we investigated the major and trace elements of Ti-rich minerals.Additionally,U–Pb dating,trace element contents,and Lu–Hf isotopic composition of zircon grains in the UHP eclogite and associated rutile-quartz veins were examined in the North Qaidam UHP metamorphic belt,Yuka terrane.The zircon grains in the rutile-quartz veins have unzoned or weak oscillatory zonings,and show low Th/U ratios,steep chondrite-normalized patterns of heavy rare earth elements(HREEs),and insignificant negative Eu anomalies,indicating their growth in metamorphic fluids.These zircon grains formed in 431
3 Ma,which is consistent with the 432
2 Ma age of the host eclogite.As for the zircons in the rutile-quartz veins,they showed steep HREE patterns on one hand,and were different from the zircons present in the host eclogite on the other.This demonstrates that their formation might have been related to the breakdown of the early stage of garnet,which corresponds to the abundance of fluids during the early exhumation stage.The core-rim profile analyses of rutile recorded a two-stage rutile growth across a large rutile grain;the rutile core has higher Nb,Ta,W,and Zr contents and lower Nb/Ta ratios than the rim,indicating that the rutile domains grew in different metamorphic fluids from the core towards the rim.The significant enrichment of high field strength elements(HFSEs)in the rutile core suggests that the peak fluids have high solubility and transportation capacity of these HFSEs.Furthermore,variations in the Nb vs.Cr trends in rutile indicate a connection of rutile to mafic protolith.The zircon grains from both the rutile-quartz veins and the host eclogite have similar Hf isotopic compositions,indicating that the vein-forming fluids are internally derived from the host eclogite.These fluids accumulated in the subduction channel and were triggered by local dehydration of the deeply subducted eclogite during the early exhumation conditions.

The Bulong Gold Deposit-a Quartz-Barite Vein Type Gold Deposit in Xinjiang:Geological Characteristics and S, He and Ar Isotopic Compositions

The Bulong gold deposit, located in the southwest Tianshan in China, occurs in the Upper Devonian finegrained clastic rocks. The gold orebodies are controlled by an gently inclined interlayer fractured zone. They are hosted only in quartz-barite veins though there are barite veins and quartz veins in the ore district. The δ34S values of pyrite in the ores range from 14.6‰ to 19.2‰ and those of barite from 35.0‰ to 39.6‰, indicating that the sulfur was derived from the strata. 3He/4He ratios of fluid inclusions in pyrite are 0.24-0.82 R/Ra, approximating to that of the crust. The 40Ar/39Ar ratios range from 338 to 471, slightly higher than that of the atmosphere. 40Ar /4He ratios of ore fluids range from 0.015 to 0.412 with a mean of 0.153. Helium and argon isotope compositions of fluid inclusions show that the ore fluids of the Bulong gold deposit were mainly derived from the crust.

REE geochemistry of auriferous quartz carbonate veins of Neoarchean Ajjanahalli gold deposit,Chitradurga schist belt,Dharwar Craton,India

REE composition of the carbonates of the auriferous quartz carbonate veins（QCVs） of the Neoarchean Ajjanahalli gold deposit.Chitradurga schist belt.Dharwar Craton,is characterized by U-shaped chondrite normalized REE patterns with both LREE and HREE enrichment and a distinct positive Eu anomaly.As positive Eu anomaly is associated with low oxygen fugacity,we propose that the auriferous fluids responsible for gold mineralization at Ajjanahalli could be from an oxygen depleted fluid.The observed positive Eu anomaly is interpreted to suggest the derivation of the auriferous fluids from a mantle reservoir.The location of Ajjanahalli gold deposit in a crustal scale shear zone is consistent with this interpretation.

Auriferous Quartz Veins from the Dongping Gold Deposit, NW Hebei Province and Metallogenesis—Fluid Inclusion Rb-SrIsochron Evidence

The Dongping gold deposit, situated on the northern margin of the North China Platform, is a composite deposit composed of auriferous quartz vein-type and altered rock-type ore bodies. It is hosted in the inner contact zone of an alkaline intrusion which was intruded into Archean metamorphic rocks and was formed not later than the Hercynian peried. Auriferous quartz veins of the deposit are dated with the fluid inclusion Rb-Sr isochron method at 103 ±4Ma, indicating that the gold deposit was formed in the Yenshanian period. 87Sr/86Sr sourcetracing shows the ore-forming materials came dominantly from alkaline intrusions. These results, combined with other isotope and REE data, suggest that the Dengping gold deposit is not a traditional magmatic hydrothermal deposit, but a reworked hydrothermal deposit related to heated and evoved meteoric water.

Fluid Inclusions in the Gold-Bearing Quartz Veins at Um Rus Area, Eastern Desert, Egypt

Fluid inclusions in the gold-bearing quartz veins at the Um Rus area are of three types: H\-2O, H\-2O-CO\-2 and CO\-2 inclusions. H\-2O inclusions are the most abundant, they include two phases which exhibit low and high homogenization temperatures ranging from 150 to 200℃ and 175 to 250℃, respectively. The salinity of aqueous inclusions, based on ice melting, varies between \{6.1\} and 8 equiv. wt% NaCl. On the other hand, H\-2O-CO\-2 fluid inclusions include three phases. Their total homogenization temperatures range from 270 to 325℃, and their salinity, based on clathrate melting, ranges between \{0.8\} and \{3.8\} equiv. wt% NaCl. CO\-2 fluid inclusions homogenize to a liquid phase and exhibit a low density range from \{0.52\} to \{0.66\} g/cm\+3. The partial mixing of H\-2O-CO\-2 and salt H\-2O-NaCl fluid inclusions is the main source of fluids from which the other types of inclusions were derived. The gold-bearing quartz veins are believed to be of medium temperature hydrothermal convective origin.

The Potential of Quartzitic Veins in SW Cameroon for High-Purity Quartz

High-purity quartz (HPQ), the prime source of silica, is increasingly considered a strategic mineral in the world market because it is the raw material for special applications in high-tech industries owing to its unique physical and chemical properties. The expected growth in demand for HPQ implies that more sources have to be found. This is the primary motivation for this study which targets the Supe area, SW Region of Cameroon. The structural occurrences of quartz veins were mapped and samples collected. The chemical nature and textural features of these samples were subsequently analyzed by X-ray tomography, scanning electron microscopy (SEM), and electron microprobe analysis (EMPA). Three deformation events, D1 - D3 are recorded. D1 is marked by the development of the strong S1 foliation defined by the gneissic layering and schistosity. D2 is a NE-SW ductile to brittle sinistral shear that controlled the formation of tension gashes that served as subsequent pathways for quartz-rich hydrothermal fluids to circulate and eventually precipitate quartz. The presence of rutile, tourmaline, and mica inclusions in the Supe veins affects the purity of the quartz. However, quartz can be treated to improve its quality. Taking into consideration the nine determinant trace elements used to classify HPQ, three (Li, P, and B) are below detection limits, Al concentrations are within the HPQ, quartz market standard, and average natural abundance;Ti values are high above all three standards in all except one sample, while Na, Ca, K, and Fe values fluctuate, thus classifying one of the samples as high purity quartz and the others as low purity quartz. These veins define tension gashes which usually occur in an echelon arrangement covering a large surface area, suggesting that more of such veins probably exist in the Supe area. Consequently, the quality and potential quantity of HPQ veins in this area suggest a high potential for HPQ exploration in the region.

Rb-Sr Isotopic Chronology of the Au-Bearing Quartz Veins in Gold Deposits in the Eastern Part of North China Platform

In the eastern part of China there had occurred large\|scale gold mineralization during the Mesozoic, resulting in a large number of important gold ore\|concentrated areas. In this paper we have selected some isotope data (including four gold deposits previously studied and two gold deposits in this work) of Au\|bearing quartz veins of the representative gold deposits in six important gold ore\|concentrated areas in the periphery of the North China Platform and calculated their metallogenic ages using the method of Ludwig (2.90 version). The results show that the representative gold deposits in the six gold ore\|concentrated areas were formed during the Mesozoic.

Petrography and Mineralogy of the Quartz and Quartz-Feldspar Sulphide Veins in the Pan-African Syenitic Massif of Guider (North Cameroon)

In the syenitic pluton of Guider (593 ± 4 Ma) in the North-West Cameroon domain of Central African Fold Belt, mineralized N-S to NE-SW vertical or sub-vertical quartz and quartz feldspar veins has been recently identified. In this contribution, we present petrography and mineralogy of these veins, in order to constrain their genesis and emplacement mechanisms based on detailed field work, petrographic studies and chemical characterization of minerals by using an electron probe microanalyser (EPMA). Field observations and vein microstructures show that the emplacement of the veins has been controlled by the dextral N-S trending strike-slip shear zones related to the regional D2 deformation phase. The results of mineralogical analysis reveal the co-presence of silicates and metallic minerals that include magnetite, ilmenite, pyrite, bismuthite, galena (very rare) and sulphide complexes (BiPbS, BiAgPbS, FeBiPbCuS, BiFe(TeS), FeBiPbS, BiPbCuS). The gangue is represented by quartz (quartz 1, quartz 2 and quartz 3), feldspars, sericite, chlorite, yellowish brown clay minerals, and hematite. The textural relationships between sulphides, quartz and alteration products show that the mineralization is essentially syn- to late-D2 and suggest that syenitic country rock and dextral shear zones have played an important role in the metallogenesis of these veins. This mineralization shows characteristics for copper-bearing calc-alkaline deposits, but differs from these by its more extensive alteration and its abundance in hematite. Substitutions of Al(IV) by Si(IV) in sericite associated with the sulphide mineralization and cataclastic deformation suggest that the temperature of trapping of the fluids is between 230°C and 275°C.

Geology of the Structurally Controlled Quartz Vein Gold Mineralization in the Dikko Area, Part of Zungeru—Minna—Birnin Gwari Schist Belt, NW Nigeria

Dikko area, Niger State, North Central Nigeria falls within the Pan-African thermo-tectonic event which occurred in Nigeria as in other parts of West Africa with widespread effect on the mineralization of rejuvenated basement and geosynclinal trough deposits. The Pan-African Belt in Nigeria forms part of the Benin-Nigeria (Dahomeyan) shield which is regarded as the southern prolongation of the circumcratonic Pan-African belt of the West African Craton. Structurally controlled, gold-bearing quartz veins were measured and studied in the area from an extensive geological ground investigation. Field and petrographical studies indicate that the Neoproterozoic rocks constitute gneisses, amphibolite schist, amphibolites and migmatites. The amphibolites are intruded by pegmatites. The associated quartz veins are generally concordant with the main N-S regional structural trend. The lithological and structural studies carried out in these areas have demonstrated the relationship between structures and mineralization and/or lithology. The main characteristics of the gold mineralization in the area appear to indicate hydrothermal mineralization in connection with shear zones. This study allows us to predict that quartz veins in the amphibolite can be mined at a profit and a detailed geochemical and resource valuation needs to be carried out for the Au and associated Galena and Ag mineralization to fully exploit their economic potential.

Genesis and mineralization of gold-bearing quartz veins in the Xiao Qinling area,central China

Gold-bearing quartz veins of the Taihua Group consisting of Archean metavolcanic rocks are a main gold deposit type in the Xiao Qinling area,one of the three biggest gold production areas in China.The quartz veins experienced strong alteration characterized by a typical mesothermal hydrothermal altered mineral assemblage.The grade of gold is affected by the contents of sulphides,e.g.galena,pyrite and chalcopyrite.Results of minor elements analysis for the of gold-bearing quartz veins indicate higher contents of Au and high contents of Ag,Pb,Cu,Cd,W,and Mo.Abundant fluid inclusions were found in the gold-bearing quartz veins.Three types of fluid inclusions were identified:(1) aqueous inclusions;(2) CO 2-bearing inclusions;and(3) daughter crystal-bearing fluid inclusions.Homogenization temperatures ranged from 110 to 670℃ with low and high peaks appearing at 160 180℃ and 280 300℃,respectively.The salinity of aqueous inclusions varies between 1.8 wt% and 38.2 wt% NaCl.The homogenization temperature and salinity show a positive correlation.The H and O isotopes of fluid inclusions in the gold-bearing quartz veins indicate that magmatic solution and metamorphic hydrothermal solution,together with meteoric water,were involved in the formation of gold-bearing fluid.Mesozoic magma activities related to granite intrusions should be the main source of CO 2 fluid with higher temperature and salinity.

A new type of Mo-bearing quartz vein by acid leaching:evidence from Dahu-Qinnan Mine,northern belt of the Xiaoqinling gold province,central China

Dahu-Qinnan molybdenum deposit,located in the northern part of the Xiaoqinling gold province,belongs to the Xiaoqinling-Waifangshan sub-zone of the eastern Qinling Mo-W metallogenic belt,central China.Molybdenite mineralization is associated with Au-bearing quartz veins.This paper is based on field observations and PIMA analytical data on the occurrences,and details textures and alteration patterns of Mo-bearing quartz veins in Dahu-Qinnan region.The Mo-bearing quartz veins exhibit friable with cream colored,vuggy,infilling texture and brecciated texture.The breccia clasts within Mo-bearing quartz veins are dominated by gneissic rocks of the Taihua Supergroup,and Mesozoic porphyritic granite dyke with stockwork and disseminated molybdenite mineralization.The breccias are replaced by clay minerals.Alteration associated with molybdenite-bearing quartz veins is characterized by K-feldspar(only in the breccias),sericite,sillicification(residual silica),kaolinite,smectite and anhydrite.Molybdenite with other sulfide minerals infills fissures and pore spaces in the quartz veins.As the results of above,and according to the observed geological events in the area and taking into account the geological setting,molybdenite-bearing quartz veins are likely to have been affected by late acid leaching.The precursor porphyry Mo ore,associated with porphyry granite dyke formed probably at ca.245--211 Ma during the continent-continenl collision of Qinling orogeny.

Fluid Inclusion Feature of Gold-Bearing Quartz Veins from the Jinniushan Gold Deposit, Shandong, China

The auriferous veins at Jinniushan occurs within the Jinniushan faulted zone in the Kunyushan Granite. Optical observation reveals that gold ore body formed during the main stage of hydrothermal activity. Detailed geothermometric studies of fluid inclusions from the veins show that the forming temperature ranges between 130℃ and 370℃ and the salinity is from 4.01 to 15.21 wvt percent NaCl. The ore-forming fluid is featured by low to moderate salinity, and low to moderate temperature. According to investigations of the values of vapor/liquid and temperatures of the ore-forming fluids, we propose that the boiling fluid inclusions exist in the main mineralization stages. Fluid boiling is suggested as a mechanism for the precipitation of gold from the hydrothermal fluid in the Jinniushan gold deposit.

Gold Behavior in Weathering Products of Quartz Vein in Mintom Area South Cameroon(Central Africa)

Gold mineralization in Mintom area, south Cameroon was studied in a tropical forest setting using X-ray diffraction, inductively coupled plasma-atomic emission spectrometry (ICP/AES) and inductively coupled plasma-mass spectrometry (ICP/MS) respectively for the mineralogical and chemical data. The mineralization occurs in quartz veins in the archean Ntem complex of the vast Congo Craton in Central Africa. Gold distribution patterns were vertically studied in the different horizons of the weathering profile and in the different grain-size fractions of the materials sampled in the pit on down slope of the interfluve where the mineralization exists. The weathering profile consists of an upper, thin loose sandy-clayey horizon (P6) covered by a light humic horizon, a nodular horizon with lateritic nodules or blocks (P5), a gravel horizon (P4), a thin spotted horizon (P3) and a saprolite (P2) up to 1.4 m thick. The specific geochemical signature of the bedrock is not recognized in each horizon of the weathering profile. Some groups of elements, e.g., high SiO2 and low REE characterize quartz vein while Cr-Ni characterizes a basic rock like gabbro. The residual gold is concentrated at the base of weathering profile. Its concentration increases from the saprolite up to the gravel horizon and decreases in the surface horizons. However, the evolution of visible Au distribution is not the same for all grain-size fractions: 1) in the finest fraction, the Au content is only regular in spotted and gravel horizons;2) in the medium size fractions, the Au is in high content and greatly decreases from saprolite up to the spotted horizon and disappears in the upper horizons;3) in the coarsest fraction, Au content is found in the saprolite and the maximum Au content of the weathering profile is found in this layer just above the mineralized quartz vein. This observation shows that the Mintom residual gold comes from the quartz vein.

PRELIMINARY STUDY ON THE ORE-FORMING CONDITIONS OF THE Au-Pb-QUARTZ VEIN TYPE ORE DEPOSIT,CHINA

There are few Au-Pb-Quartz vein type ore deposits in other countries except China. It might be related to the geohistory and geotectonic background. However, this kind of ore deposit has an important economical significance in China. Its formation is due to the dis-tinctive geological conditions of china. Wendong Au-Pb-Quartz type ore deposit including Wenyu and Dongchuang in Xiaoqinling gold field is the most typical. It is a polygenetic and compound ore deposit, Jintongcha and other deposits lying to the west of it in Xiaoqinling area are Au-Pb-Quartz vein type ore deposits. Others of this area lying to the east of Jintongcha are Au-Quartz vein type. This phenomenon stems from the zonnal distribution of minernal de-posits and the different development of the two major minernalzation stages. The results ob-tained from the fluid inclusion research have supported this inference.

辽东半岛五龙金矿外围电性特征及找矿意义

辽东五龙金矿经过80余年的开采,矿山资源储备严重下滑,后备资源不足问题日益突出,亟需查明矿区深部和外围矿产资源。通过在v163号脉西北和东南两侧以及100号断裂南侧开展瞬变电磁法测量工作,构建了相应的二维和三维地电模型,分析了矿区低阻异常特征;结合前人研究成果,推断出金矿成因类型和下一步找矿方向。研究结果表明:v163号脉西北方向P0剖面上低阻区是由包括163号脉西北段的细粒闪长岩脉群引起的,属于石英脉型成矿的可能性较大;100号断裂南侧三维地电模型中的低阻区域与大孤顶子金矿矿化点相对应,该低阻区向北侧深部规模增大,异常未封闭,表明该区域北侧深部具有良好的找矿前景,值得进一步开展研究工作;v163号脉东南方向的三维地电模型中,低阻异常值在数量级上明显低于前二者,推测为蚀变带引起,后经工程验证孔揭露,该区域纵向存在多层不连续的硅化蚀变岩,最大厚度为41m,蚀变类型有硅化、绢云母化、绿泥石化以及不同程度的黄铁矿化。研究表明,五龙金矿不仅存在石英脉型金矿体,还有蚀变岩型金矿体,后者可能是该矿区下一个找矿的主要方向。

急倾斜脉群钨矿开采过渡区围岩力学环境变化特征研究

随着现代化采矿工艺的发展,急倾斜脉群矿体正由传统的浅孔留矿法向更高效的阶段矿房法转变,采区围岩力学环境扰动规律也随之改变,特别是在2种采矿方法接替的开采过渡区,可能存在围岩力学环境分布规律的盲区。基于声发射测定的初始地应力采用FLAC3D软件模拟研究了过渡区开采中段采区围岩的力学环境变化特征。结果表明:①上部采区经浅孔留矿法回采出矿后,采区上下盘围岩受到拉应力作用且存在采场边帮松脱的趋势,单脉采场间围岩受应力作用不均匀导致上下端位移交错分布,采区上下盘围岩及单脉采场间围岩以剪切塑性区为主,有发生剪切破坏的风险。②下部采区经阶段矿房法回采出矿后,采区的应力集中现象更加明显,采场顶板出现沉降趋势,采区上下盘围岩向竖直方向变形且两采区位移较连续,采区的顶底板主要为拉伸塑性区且上下盘围岩存在较大范围的剪切塑性区,预示着采区围岩可能同时存在张拉和剪切破坏风险。③对采空区及时进行废石嗣后充填能够有效抑制应力集中现象。矿山在开采过渡区生产时应严格控制上下部相邻采场的开采、充填时序,避免超前开采,进而最大程度抑制应力集中导致的围岩变形、失稳等不利影响。

高精度磁测在柴达木盆地北缘三角顶金矿床找矿中的应用

三角顶金矿床位于柴北缘结合带滩间山岩浆弧,是区域造山型金矿成矿事件响应的产物;研究区主要出露寒武系—奥陶系滩间山群火山岩组,岩性主要为玄武岩、硅质岩等;岩浆活动强烈,主要为晚泥盆世花岗闪长岩、二长花岗岩等,岩体中发育辉绿岩脉、石英脉等;基性—酸性岩中磁性由强变弱,其中辉长岩、二长花岗岩磁化率最高分别为8815.6×10^(-6)×4π·SI、5992.4×10^(-6)×4π·SI,可能由磁铁矿化、黄铁矿化引起强磁化率;磁异常呈锯齿状不规则跳跃,强度中等,梯度变化大,幅值为-733~820 nT;高精度磁法测量对与金矿成矿关系密切的断裂构造、破碎蚀变带等地质体有较好的分辨效果,经高精度磁法探测出局部异常呈串珠状分布,沿异常轴部存在断裂构造。经部分工程验证,在区内圈定构造蚀变带12条、金矿体7条、金矿化体40余条,M18-2异常与区内化探异常、深部工程验证等找矿信息相吻合,为区内进一步金矿找矿方向提供了依据。