Spatiotemporal Variation and Influencing Factors of Atmospheric CO_(2) Concentration in China

Rapid increases in Carbon dioxide(CO_(2))levels could trigger unpredictable climate change.The assessment of spatiotempor-al variation and influencing factors of CO_(2) concentration are helpful in understanding the source/sink balance and supporting the formu-lation of climate policy.In this study,Greenhouse Gases Observing Satellite(GOSAT)data were used to explore the variability of CO_(2) concentrations in China from 2009 to 2020.Meteorological parameters,vegetation cover,and anthropogenic activities were combined to explain the increase in CO_(2) concentration,using pixel-based correlations and Covariance Based Structural Equation Modeling(CB-SEM)analysis.The results showed that the influence of vertical CO_(2) transport diminished with altitude,with a distinct inter-annual in-crease in CO_(2) concentrations at 17 vertical levels.Spatially,the highest values were observed in East China,whereas the lowest were observed in Northwest China.There were significant seasonal variations in CO_(2) concentration,with maximum and minimum values in spring(April)and summer(August),respectively.According to the pixel-based correlation analysis,the near-surface CO_(2) concentration was positively correlated with population(r=0.99,P<0.001),Leaf Area Index(LAI,r=0.95,P<0.001),emissions(r=0.91,P<0.001),temperature(r=0.60,P<0.05),precipitation(r=0.34,P>0.05),soil water(r=0.29,P>0.05),nightlight(r=0.28,P>0.05);and negatively correlated with wind speed(r=−0.58,P<0.05).CB-SEM analysis revealed that LAI was the most important con-trolling factor explaining CO_(2) concentration variation(total effect of 0.66),followed by emissions(0.58),temperature(0.45),precipita-tion(0.30),wind speed(−0.28),and soil water(−0.07).The model explained 93% of the increase in CO_(2) concentration.Our results provide crucial information on the patterns of CO_(2) concentrations and their driving mechanisms,which are particularly significant in the context of climate change.

Factor Structure and Longitudinal Invariance of the CES-D across Diverse Residential Backgrounds in Chinese Adolescents

Background:Valid and reliable measures of depressive symptoms are crucial for understanding risk factors,outcomes,and interventions across rural and urban settings.Despite this need,the longitudinal invariance of these measures over time remains understudied.This research explores the structural components of the Center for Epidemiological Studies Depression Scale(CES-D)and examines its consistency across various living environments and temporal stability in a cohort of Chinese teenagers.Method:In the initial phase,1,042 adolescents furnished demographic details and undertook the CES-D assessment.After a three-month interval,967 of these participants repeated the CES-D evaluation.The study employed Confirmatory factor analysis(CFA)to scrutinize the scale’s structural integrity.We investigated factorial invariance by conducting a twopronged CFA:one comparing urban vs.rural backgrounds,and another contrasting the results from the initial assessment with those from the follow-up.Results:The CES-D demonstrated adequate reliability in both rural and urban high school student samples.The preliminary four-factor model applied to the CES-D demonstrated a good fit with the collected data.Invariance tests,including multigroup analyses comparing rural and urban samples and longitudinal assessments,confirmed the scale’s invariance.Conclusions:The results suggest that the CES-D serves as a reliable instrument for evaluating depressive symptoms among Chinese adolescents.Its applicability is consistent across different living environments and remains stable over time.

Genetic Structure of Reaumuria soongorica Population in Fukang Desert, Xinjiang and Its Relationship with Ecological Factors

Genetic structure and differentiation of Reaumuria soongorica (Pall.) Maxim population from the desert of Fukang, Xinjiang, were assessed by means of random amplified polymorphic DNA (RAPD) markers. High genetic diversity and differentiation were revealed in the population of R soongorica by 15 random primers. One hundred and thirty-six individuals from seven subpopulations were sampled in the study. Seventy-one loci have been detected, and among them 69 were polymorphic. The mean proportion of polymorphic loci (PPB) was 97.18%. The analyses of Shannon information index (0.307 5), Nei's gene diversity (0.312 7) and G(ST)(0.312 0) indicated that there were more genetic variations within the subpopulations than those among the subpopulations. The results of AMOVA analysis showed that 61.58% of the genetic variations existed within subpopulations, and 38.02% among the subpopulations. The gene flow among the subpopulations of R soongorica (Nm = 1.102 8) was much less than that of the common anemophytes (Nm = 5.24), so genetic differentiation among the subpopulations occurred to some extent. Additionally, through the use of clustering and the correlation analyses, we found that the genetic structure of natural population of R soongorica was related to some ecological factors (soil factors mainly) of the oasis-desert transition zone. The genetic diversity level of R soongorica had negative correlation with the content of total soil P and Cl significantly (P < 0.05). On the contrary, it had significant positive correlation with CO32- (P < 0.05), showing that the distribution of the individuals of R soongorica in the sampled areas correlates with certain soluble salt. Furthermore, the genetic diversity of the natural population of R soongorica increased with the decreasing of the content of soil organic matters, water, total N and total P in soil. The paper concluded that the microenvironment ecological factors played an important role in the adaptive evolution of R soongorica population.

Analysis on Fuji Apple Tree Structures and Related Factors under Different Pruning Modes

To determine the correlations between the tree structuresof Fuji apple with different pruning modes and each factor, the data about 3 tree structures which were free spindle short shoot, free spindle long shoot and slenderspindle short shoot in Xingtang County of Hebai Province were investigated, then by SPSS anal- ysis, the correlations between the taperingness and each growth factor of inserted small branch were compared. The results showed that the taperingness of central trunk of free spindle dwarf-shoot Fuji apple treeshad negative correlations with each factor of inserted small branch, while the taperingness of central trunk of free spin- dle long-shoot Fuji apple treeshad positive correlations with each factor of inserted small branch, the taperingness of central trunk of slenderspindle short-shootFuji ap- ple treeshad negative correlation with total thickness of inserted small branch, but had positive correlations with other factors. This study can provide a scientifictheo- retical basis for the pruning technology of high-density planting trees grafting by dwarfing self-rooted rootstock.

Correlation Between the Animal Community Structure and Environmental Factors in Dongbei Cave and Shuijiang Cave of Guizhou Province

Mollusks, arthropods and chordates which were visible to the naked eye were observed and collected in Dongbei and Shuijiang caves of Libo county five times between February and July from 2002 to 2005. Four hundred and forty samples from Dongbei Cave were classified into three phyla, five classes, 10 orders, 20 families and 39 species or groups of species. Four hundred and ninety-eight samples from Shuijiang Cave were classified into three phyla, six classes, 11 orders, 20 families and 25 species or groups of species. Six animal communities were identified in the light belt of the two caves according to their species types and numbers of individuals in the light belt of two cave. The communities which have the highest values of species richness community diversity, maximum diversity, evenness, dominance and community similarity are respectively： B （4. 1059）, H （2.4716）, B （3.3322）, E （0.9042）, C （0.3442） and A - C （0. 5251）. The community diversity and correlation of environmental factors were also studied. The temperature, humidity, content of CO2 and N2, content of organic matter and some inorganic salts in soil were analyzed by Pearson correlation. The results showed that the content of organic matter in soil is positively related to species number, species richness and maximum community diversity, with correlations of 0. 885, 0.909, 0. 868 respectively （two-tailed significance test, P ≤ 0. 05）, and significantly positively related to diversity, with the coefficient of 0.611, （two-tailed significance test, P ≤ 0. 1）. This suggests that the content of organic matter in soil is one of the important elements influencing the community variation of cave animals. Outside the cave, temperature and humidity are important factors impacting on community diver- sity. As the temperature in all seasons in the cave is stable and the humidity is always high （above 90% ）, the temperature and humidity have weak correlation to community diversity in caves.

Research on Regional Land Use Structure Change and Influencing Factors——A Case Study of Yining City in Xinjiang

This paper analyzes the land use status and land use structure change in 1995-2004 in Yining City, revealing that the agricultural land area has decreased rapidly, and construction land has increased dramatically. Moreover, this paper inves- tigates the relation of economy, urbanization, location, land system policy with land use structure, and puts forward rationalization proposal for optimization of land use structure, to provide reference for land use measurements in the future.

Drivers of spatial structure in thinned forests

Background:As is widely known,an increasing number of forest areas were managed to preserve and enhance the health of forest ecosystems.However,previous research on forest management has often overlooked the importance of structure-based.Aims:Our objectives were to define the direction of structure-based forest management.Subsequently,we investigated the relationships between forest structure and the regeneration,growth,and mortality of trees under different thinning treatments.Ultimately,the drivers of forest structural change were explored.Methods:On the basis of 92 sites selected from northeastern China,with different recovery time (from 1 to 15years) and different thinning intensities (0–59.9%) since the last thinning.Principal component analysis (PCA)identified relationships among factors determining forest spatial structure.The structural equation model (SEM)was used to analyze the driving factors behind the changes in forest spatial structure after thinning.Results:Light thinning (0–20%trees removed) promoted forest regeneration,and heavy thinning (over 35% of trees removed) facilitated forest growth.However,only moderate thinning (20%–35%trees removed) created a reasonable spatial structure.While dead trees were clustered,and they were hardly affected by thinning intensity.Additionally,thinning intensity,recovery time,and altitude indirectly improve the spatial structure of the forest by influencing diameter at breast height (DBH) and canopy area.Conclusion:Creating larger DBH and canopy area through thinning will promote the formation of complex forest structures,which cultivates healthy and stable forests.

Influencing factors analysis of hard limestone reformation and strength weakening under acidic effect

Roof disaster has always been an important factor restricting coal mine safety production.Acidic effect can reform the rock mass structure to weaken the macroscopic strength characteristics,which is an effective way to control the hard limestone roof.In this study,the effects of various factors on the reaction characteristics and mechanical properties of limestone were analyzed.The results show that the acid with stronger hydrogen production capacity after ionization(pK_(a)<0)has more prominent damage to the mineral grains of limestone.When pKa increases from−8.00 to 15.70,uniaxial compressive strength and elastic modulus of limestone increase by 117.22%and 75.98%.The influence of acid concentration is manifested in the dissolution behavior of mineral crystals,the crystal defects caused by large-scale acid action will lead to the deterioration of limestone strength,and the strength after 15%concentration reformation can be reduced by 59.42%.The effect of acidification time on limestone has stages and is the most obvious in the initial metathesis reaction stage(within 60 min).The key to the strength damage of acidified limestone is the participation of hydrogen ions in the reaction system.Based on the analytic hierarchy process method,the influence weights of acid type,acid concentration and acidification time on strength are 24.30%,59.54% and 16.16%,respectively.The research results provide theoretical support for the acidification control of hard limestone roofs in coal mines.

Distribution and influencing factors of microeukaryote in different water layers of the southwestern Indian Ocean Ridge

Microeukaryotes play a vital role in shaping marine ecosystems,especially in marine productivity,the microbial food web,and carbon cycle.The Indian Ocean is one of the largest oligotrophic areas in the world,but little is known about the biodiversity of microeukaryotes in the area.The community composition and geographical distribution of microeukaryotes collected from the surface(SUR)and deep chlorophyll maximum(DCM)layers in the southwestern Indian Ocean were studied using high-throughput sequencing of the 18S rRNA gene.The metagenomic data helped quantify the impact of environmental factors on microeukaryotic communities.The relative abundance of different taxa groups exhibited distinct patterns between SUR and DCM layers,except for the most dominant Dinoflagellata that accounted for more than 40.6%abundance in each sample.Radiolaria was much more abundant in the nutrient-rich DCM layer than the SUR layer.The community similarity of microeukaryotes decreased with increasing of geographic distance,whereas the temperature and inorganic nitrogen were the most important environmental parameters to community structure.Abundant communities were more influenced by dispersal limitations and rare communities were more responsive to environmental factors.Correlation network analyses revealed strong biotic interactions indicative of parasitism,predation and competition,and their contribution to microeukaryotic population in diverse environments.Overall,this study provided insights into the biodiversity of microeukaryotes by characterizing the differences between water layers and identifying the driving factors in the ocean.

Coaxial electrohydrodynamic printing of core–shell microfibrous scaffolds with layer-specific growth factors release for enthesis regeneration

The rotator cuff tear has emerged as a significant global health concern.However,existing therapies fail to fully restore the intricate bone-to-tendon gradients,resulting in compromised biomechanical functionalities of the reconstructed enthesis tissues.Herein,a tri-layered core–shell microfibrous scaffold with layer-specific growth factors(GFs)release is developed using coaxial electrohydrodynamic(EHD)printing for in situ cell recruitment and differentiation to facilitate gradient enthesis tissue repair.Stromal cell-derived factor-1(SDF-1)is loaded in the shell,while basic fibroblast GF,transforming GF-beta,and bone morphogenetic protein-2 are loaded in the core of the EHD-printed microfibrous scaffolds in a layer-specific manner.Correspondingly,the tri-layered microfibrous scaffolds have a core–shell fiber size of(25.7±5.1)μm,with a pore size sequentially increasing from(81.5±4.6)μm to(173.3±6.9)μm,and to(388.9±6.9μm)for the tenogenic,chondrogenic,and osteogenic instructive layers.A rapid release of embedded GFs is observed within the first 2 d,followed by a faster release of SDF-1 and a slightly slower release of differentiation GFs for approximately four weeks.The coaxial EHD-printed microfibrous scaffolds significantly promote stem cell recruitment and direct their differentiation toward tenocyte,chondrocyte,and osteocyte phenotypes in vitro.When implanted in vivo,the tri-layered core–shell microfibrous scaffolds rapidly restored the biomechanical functions and promoted enthesis tissue regeneration with native-like bone-to-tendon gradients.Our findings suggest that the microfibrous scaffolds with layer-specific GFs release may offer a promising clinical solution for enthesis regeneration.

Failure evaluation and control factor analysis of slope block instability along traffic corridor in Southeastern Tibet

The instability of slope blocks occurred frequently along traffic corridor in Southeastern Tibet(TCST),which was primarily controlled by the rock mass structures.A rapid method evaluating the control effects of rock mass structures was proposed through field statistics of the slopes and rock mass structures along TCST,which combined the stereographic projection method,modified M-JCS model,and limit equilibrium theory.The instabilities of slope blocks along TCST were then evaluated rapidly,and the different control factors of instability were analyzed.Results showed that the probabilities of toppling(5.31%),planar(16.15%),and wedge(35.37%)failure of slope blocks along TCST increased sequentially.These instability modes were respectively controlled by the anti-dip joint,the joint parallel to slope surface with a dip angle smaller than the slope angle(singlejoint),and two groups of joints inclined out of the slope(double-joints).Regarding the control effects on slope block instability,the stabilization ability of doublejoints(72.7%),anti-dip joint(67.4%),and single-joint(57.6%)decreased sequentially,resulting in different probabilities of slope block instability.Additionally,nearby regional faults significantly influenced the joints,leading to spatial heterogeneity and segmental clustering in the stabilization ability provided by joints to the slope blocks.Consequently,the stability of slope blocks gradually weakened as they approached the fault zones.This paper can provide guidance and assistance for investigating the development characteristics of rock mass structures and the stability of slope blocks.

Main controlling factor and mechanism of gas-in-place content of the Lower Cambrian shale from different sedimentary facies in the western Hubei area, South China

The Lower Cambrian shale gas in the western Hubei area,South China has a great resource prospect,but the gas-in-place(GIP)content in different sedimentary facies varies widely,and the relevant mechanism has been not well understood.In the present study,two sets of the Lower Cambrian shale samples from the Wells YD4 and YD5 in the western Hubei area,representing the deep-water shelf facies and shallowwater platform facies,respectively,were investigated on the differences of pore types,pore structure and methane adsorption capacity between them,and the main controlling factor and mechanism of their methane adsorption capacities and GIP contents were discussed.The results show that the organic matter(OM)pores in the YD4 shale samples are dominant,while the inorganic mineral(IM)pores in the YD5 shale samples are primary,with underdeveloped OM pores.The pore specific surface area(SSA)and pore volume(PV)of the YD4 shale samples are mainly from micropores and mesopores,respectively,while those of the YD5 shale samples are mainly from micropores and macropores,respectively.The methane adsorption capacity of the YD4 shale samples is significantly higher than that of the YD5 shale samples,with a maximum absolute adsorption capacity of 3.13 cm^(3)/g and 1.31 cm^(3)/g in average,respectively.Compared with the shallow-water platform shale,the deep-water shelf shale has a higher TOC content,a better kerogen type and more developed OM pores,which is the main mechanism for its higher adsorption capacity.The GIP content models based on two samples with a similar TOC content selected respectively from the Wells YD4 and YD5 further indicate that the GIP content of the deep-water shelf shale is mainly 34 m^(3)/t within a depth range of 1000—4000 m,with shale gas exploration and development potential,while the shallow-water platform shale has normally a GIP content of<1 m^(3)/t,with little shale gas potential.Considering the geological and geochemical conditions of shale gas formation and preservation,the deep-water shelf facies is the most favorable target for the Lower Cambrian shale gas exploration and development in the western Hubei area,South China.

Identification of time-varying system and energy-based optimization of adaptive control in seismically excited structure

The combination of structural health monitoring and vibration control is of great importance to provide components of smart structures.While synthetic algorithms have been proposed,adaptive control that is compatible with changing conditions still needs to be used,and time-varying systems are required to be simultaneously estimated with the application of adaptive control.In this research,the identification of structural time-varying dynamic characteristics and optimized simple adaptive control are integrated.First,reduced variations of physical parameters are estimated online using the multiple forgetting factor recursive least squares(MFRLS)method.Then,the energy from the structural vibration is simultaneously specified to optimize the control force with the identified parameters to be operational.Optimization is also performed based on the probability density function of the energy under the seismic excitation at any time.Finally,the optimal control force is obtained by the simple adaptive control(SAC)algorithm and energy coefficient.A numerical example and benchmark structure are employed to investigate the efficiency of the proposed approach.The simulation results revealed the effectiveness of the integrated online identification and optimal adaptive control in systems.

The Interrelationship between Culture and Capital Structure:Evidence from International Retailers

The present study investigates the influence of cultural factors in 2022 on the capital structure of global retailers.There are sixteen retailers from eight countries in the sample.In recent times,numerous academicians have taken an interest in examining the capital structure and business model of retailers,owing to their swift and consistent growth.However,the fact that the majority of research originates from the retailers’host country gives rise to debate regarding the applicability of the capital structure of said retailers to countries with distinct cultural environments.Consequently,academics have begun to investigate whether the capital structure of multinational retailers is impacted by the diversity of national cultures.

Community structure and controlled factor of attached green algae on the Porphyra yezoensis aquaculture rafts in the Subei Shoal, China

This study analyzes the community structure, the quantity changes of the algae and the effect of important environmental factors and estimates the total biomass of the attached green algae in the survey areas. The study uses data from surveys of the attached green algae on the Porphyra yezoensis aquaculture rafts and data regarding the environmental factors from October 2010 to April 2011 in the Subei Shoal. The attached green algae on the rafts included Ulva prolifera, Capsosiphon groenlandicus, U. linza, U. intestinalis, U. clathrata, and U. cornpressa. The biomass changes of the attached green algae exhibited an inverted parabola： the biomass was the highest （14 898 t） in April, and was the second highest （2 034 t） in November; it was lowest in February （only 729 t） and increased sharply from March to April. The species diversity differed significantly among the seasons. In September and October, when the P. yezoensis aquaculture rafts were initially set up, the attached green algae had a high biodiversity, while from December to the next February, a variety of green algae species coexisted on the rafts, although the biomass was low, and from March to April, as the biomass increased sharply, the species diversity dropped to the minimum. During this time, C. groenlandicus was apparently dominant with the maximum biomass proportion up to 80%, while the U. prolifera proportion increased exponentially to 20% to 40%. The water temperature had a direct regulating effect on the biomass and the species succession of the attached green algae. The estimation of the community dynamics and the biomass of the green algae provided the evidence needed to track the origin of the large-scale green tide in the southern Yellow Sea.

An Evaluation of the Critical Success Factors in Sustainable Food Supply Chains in Developing Countries

Food is one of the biggest industries in developed and underdeveloped countries. Supply chain sustainability is essential in established and emerging economies because of the rising acceptance of cost-based outsourcing and the growing technological, social, and environmental concerns. The food business faces serious sustainability and growth challenges in developing countries. A comprehensive analysis of the critical success factors (CSFs) influencing the performance outcome and the sustainable supply chain management (SSCM) process. A theoretical framework is established to explain how they are used to examine the organizational aspect of the food supply chain life cycle analysis. This study examined the CSFs and revealed the relationships between them using a methodology that included a review of literature, interpretative structural modeling (ISM), and cross-impact matrix multiplication applied in classification (MICMAC) tool analysis of soil liquefaction factors. The findings of this research demonstrate that the quality and safety of food are important factors and have a direct effect on other factors. To make sustainable food supply chain management more adequate, legislators, managers, and experts need to pay attention to this factor. In this work. It also shows that companies aiming to create a sustainable business model must make sustainability a fundamental tenet of their organization. Practitioners and managers may devise effective long-term plans for establishing a sustainable food supply chain utilizing the recommended methodology.

The MDOF equivalent linear system and its applications in seismic analysis and design of framed structures

This paper reviews the applications of the multi degree-of-freedom(MDOF)equivalent linear system in seismic analysis and design of planar steel and reinforced concrete framed structures.An equivalent MDOF linear structure,analogous to the original MDOF nonlinear structure,is constructed,which has the same mass and elastic stiffness as the original structure and modal damping ratios that account for the effects of geometrical and material nonlinearities.The equivalence implies a balance between the viscous damping work of the equivalent linear structure and that of the nonlinearities in the original nonlinear structure.This work balance is established with the aid of a transfer function in the frequency domain.Thus,equivalent modal damping ratios can be explicitly determined in terms of the period and deformation levels of the structure as well as the soil types.Use of these equivalent modal damping ratios can help address a variety of seismic analysis and design problems associated with planar steel and reinforced concrete framed structures in a rational and accurate manner.These include force-based seismic design with the aid of acceleration response spectra characterized by high amounts of damping,improved direct displacement-based seismic design and the development of advanced seismic intensity measures.The equivalent modal damping ratios are also utilized in the context of linear modal analysis for the definition and construction of the MDOF response spectrum.Furthermore,the equivalent modal damping ratios are employed in a seismic retrofit method for steel-framed structures with viscous dampers.Finally,it is demonstrated that modal behavior(or strength reduction)factors can be easily constructed based on these modal damping ratios for a more rational and accurate force-based seismic design,including the determination of inelastic displacement profiles.

Influence of environmental factors on corrosion damage of aircraft structure

Corrosion is one of the important structural integrity concerns of aging aircraft, and it is estimated that a significant portion of airframe maintenance budgets is directed towards corrosion-related problems for both military and commercial aircraft. In order to better understand how environmental factors influence the corrosion damage initiation and propagation on aircraft structure and to predict pre-corrosion test pieces of fatigue life and structural integrity of an effective approach, this paper uses the cellular automaton (CA) method to character the effect of electrolyte concentrations, dissolution probabilities, and temperature on the corrosion damage of a metal structure exposed to an aggressive environment, and the procedure for applying the local rules between the cells of the CA to simulate the corrosion damage evolution is formulated. The simulation results show that the different electrolyte concentrations, dissolution probabilities and temperature, the laws of the dissolution current with time are investigated and they obey the time power function.

Factor input structure,environmental policies,and the export quality upgrade:a perspective of heterogeneity

In the analysis of how environmental regulation affects the comparative advantage of trade,existing literature ignores industry's inherent heterogeneity, which draws remarkably different conclusions. In view of this, the paper analyzed the mechanism of environmental regulation on the export quality of different industries from the perspective of factor input structure heterogeneity. Based on the panel data of China's manufacturing industry, the paper used the system generalized method of moments method to examine the heterogeneity influence of environmental regulation on manufacturing export quality. The study found that, first, environmental regulation affected the export quality upgrade of the manufacturing sector through offset effect and compensation effect, and the direction of the impact would mainly depend on the industry's factor input structure. Second, for industries with larger fixed-asset investment(FAI) ratio in the factor input structure, the current environmental regulation policy was not conducive to the export quality upgrading of the industries. However, there was a significant U-shaped dynamic relationship between them. As environmental regulations became stricter, when regulatory stringency went beyond the inflection point, the policy would promote the upgrading of export quality. But for industries with smaller proportion of FAI, environmental regulation exerted a favorable impact on the export quality upgrade, following a J-shaped marginal growth curve.Third, for industries with different factor input structure, their export quality had been effectively upgraded as expected by factors like human capital investment, independent R&D, technology introduction, and foreign direct investment; but raising per capita capital stock and expanding enterprise size did not produce significant direct impact on export quality upgrade. These conclusions remained robust after using different measurement methods and replacing with other variables. Therefore, this paper suggests that governments should take industry heterogeneity into consideration and formulate differentiated hierarchical environmental policies.Besides, they should strengthen the enforcement of the current environmental regulation policies. By doing so, enterprises are forced to improve their technology and product quality so that they can better cope with rising compliance costs, eliminate backward industries, and resolve excess capacity. In this way, the economic structure would be transformed and upgraded from the supply side.

Stability influence factors analysis and construction of a deep beam anchorage structure in roadway roof

Deep beam anchorage structures based on spatial distribution analysis of the cable prestressed field have been proposed for roadway roof support, Stability and other factors that influence deep beam structures are studied in this paper using mechanical calculations, numerical analysis and field measurements, A mechanical model of deep beam structure subjected to multiple loading is established, including analysis of roof support in the return airway of S1203 working face in the Yuwu coal mine, China, The expression of maximum shear stress in the deep beam structure is deduced according to the stress superposition criterion, It is found that the primary factors affecting deep beam structure stability are deep beam thickness, cable pre-tension and cable spacing, The variation of maximum shear stress distribution and prestressed field diffusion effects according to various factors are analyzed using Matlah and FLAC3DTM software, and practical support parameters of the S1203 return airway roof are determined, According to the observations of rock pressure, there is no evidence of roof separation, and the maximum values of roof subsidence and convergence of wall rock are 72 and 48 mm, respectively, The results show that the proposed roof support design with a deep beam structure is feasible and achieves effective control of the roadway roof,