Realization of Fully Differential Fourth-Order Bessel Filter with Accurate Group Delay

A fully differential R-MOSFET-C fourth-order Bessel active lowpass filter employing fully differential operational amplifier,passive resistors,and current-steering MOS transistors as a variable resistor is proposed.This proposed implementation relies on the tunability of current-steering MOS transistors operating in the triode region counteracting the concert deviation of resistor in the integrated circuit manufacturing technology in orde r that the group delay of Bessel active filter could be designed accurately.The amplifier is not only with voltage common-mode negative feedback,but also with current common-mode negative feedback,which will benefit for the stability of its D C operating point.0.75μs group delay fourth-order Bessel lowpass filter,whic h is synthesized according to passive doubly terminated RLC prototype lowpass filter,demonstrates better than -65dB THD using 100kHz,2.5V pp signal in Taiwan UMC 2P2M(2-poly,2-metal)5.0V,0.5μm CMOS technology.

脉冲MIG焊工艺研究与优化控制

研制了数字化脉冲MIG焊电源,研究其焊接工艺过程的优化控制。优化起弧方式,提高了起弧成功率,起弧点熔深效果良好;在电源输出端采用R-C滤波电路可以滤除电压中的高频干扰,达到降低弧压的目的;对熔滴过渡进行优化控制研究,对各种不同焊丝的一脉一滴临界电流曲线进行标定;采用变频控制方案对弧长进行有效控制,并引入先进先出(FIFO)的队列结构求弧压平均值;通过试验验证了采用上述优化控制方法,可以使得焊接过程稳定,焊缝成形良好。