The most important parameter used to determine force reduction factors in force-based design procedures adopted in the current seismic codes is the structural ductility. For a structure supported on a flexible foundat...The most important parameter used to determine force reduction factors in force-based design procedures adopted in the current seismic codes is the structural ductility. For a structure supported on a flexible foundation, the ductility factor could be affected by foundation compliances. The ductility factors given in the current codes are mostly assigned ignoring the effect of SSI and therefore the objective of this research is to assess the significance of SSI phenomenon on ductility factors of stack-like structures. The deformed configuration of stack-fike structures is idealized as an assemblage of beam elements considering nonlinear moment-curvature relations, while a linear sway-rocking model was implemented to model the supporting soil. Using a set of artificial records, repeated linear and nonlinear analyses were performed by gradually increasing the intensity of acceleration to a level where the first yielding of steel in linear and nonlinear analyses is observed and a level corresponding to the stack collapse in the nonlinear analysis. The difference between inelastic and elastic resistance in terms of displacement ductility factors has been quantified. The results indicate that foundation flexibility can decrease the ductility of the system and neglecting this phenomenon may lead to erroneous conclusions in the prediction of the seismic performance of flexibly-supported R/C stack-like structures.展开更多
A l/10 scale model of reinforced concrete (R C ) frame structure was tested on the 15t-shaking table of State Key Laboratory, Tongji University The structural prototype was a 10-storey office building that was damag...A l/10 scale model of reinforced concrete (R C ) frame structure was tested on the 15t-shaking table of State Key Laboratory, Tongji University The structural prototype was a 10-storey office building that was damaged in the 1985 Mexico major earthquake[1] The original acceleration records in the earthquake were applied as the input waves in the test The dynamical test model was designed according to the general law of similarity, and the effect of the shortage of artificial quality was considered The model was carefully made of fine gravel concrete and galvanized iron wire The damage of test model is in good agreement with that of archetypal building in the experiment展开更多
In order to study the dynamic behaviour of construction,specifically seismic response of structures,as many researchers did,we have resorted to modelling methods,based on the scaled internal forces.Therefore,this rese...In order to study the dynamic behaviour of construction,specifically seismic response of structures,as many researchers did,we have resorted to modelling methods,based on the scaled internal forces.Therefore,this research includes results of an experimental investigation aimed to establish the possibility of realistic simulations of the cyclic response of small-scale models of one bay,one-storey reinforced concrete frames with masonry infills as a preliminary step for simulating the dynamic response of such structural.So,the specimens constructed were 1:9 scale R/C frames.These 1:9 scale infill frames were constructed with prototype materials and were tested in an extensive experimental sequence representing specimens of a scale near the prototype(1:3).The tested laboratory models include 1:3 scale infilled R/C frames that were built from original material such as steel,concrete and masonry infills(hollow masonry units and mortar).With the same scale,geometry and construction materials used for the construction of a 1:3 scale 5-story three dimensional building.This program consisted of 16 models,5 bare and 11 masonry infilled.all models refer to single-storey one-bay 1:9 scale as for the original structure and a one third of the scale(1:3)as for the prototype(1:3).The reinforced concrete specimens were designed in such a way as to prevent shear failure of the columns.Finally,the present paper was carried out in the Laboratory of Strength of Materials and Structures in the Department of Civil Engineering at Aristotle University of Thessaloniki.展开更多
文摘The most important parameter used to determine force reduction factors in force-based design procedures adopted in the current seismic codes is the structural ductility. For a structure supported on a flexible foundation, the ductility factor could be affected by foundation compliances. The ductility factors given in the current codes are mostly assigned ignoring the effect of SSI and therefore the objective of this research is to assess the significance of SSI phenomenon on ductility factors of stack-like structures. The deformed configuration of stack-fike structures is idealized as an assemblage of beam elements considering nonlinear moment-curvature relations, while a linear sway-rocking model was implemented to model the supporting soil. Using a set of artificial records, repeated linear and nonlinear analyses were performed by gradually increasing the intensity of acceleration to a level where the first yielding of steel in linear and nonlinear analyses is observed and a level corresponding to the stack collapse in the nonlinear analysis. The difference between inelastic and elastic resistance in terms of displacement ductility factors has been quantified. The results indicate that foundation flexibility can decrease the ductility of the system and neglecting this phenomenon may lead to erroneous conclusions in the prediction of the seismic performance of flexibly-supported R/C stack-like structures.
基金the Sustentation Fundation of State Key Laboratory,Tongji University (970809D2)
文摘A l/10 scale model of reinforced concrete (R C ) frame structure was tested on the 15t-shaking table of State Key Laboratory, Tongji University The structural prototype was a 10-storey office building that was damaged in the 1985 Mexico major earthquake[1] The original acceleration records in the earthquake were applied as the input waves in the test The dynamical test model was designed according to the general law of similarity, and the effect of the shortage of artificial quality was considered The model was carefully made of fine gravel concrete and galvanized iron wire The damage of test model is in good agreement with that of archetypal building in the experiment
文摘In order to study the dynamic behaviour of construction,specifically seismic response of structures,as many researchers did,we have resorted to modelling methods,based on the scaled internal forces.Therefore,this research includes results of an experimental investigation aimed to establish the possibility of realistic simulations of the cyclic response of small-scale models of one bay,one-storey reinforced concrete frames with masonry infills as a preliminary step for simulating the dynamic response of such structural.So,the specimens constructed were 1:9 scale R/C frames.These 1:9 scale infill frames were constructed with prototype materials and were tested in an extensive experimental sequence representing specimens of a scale near the prototype(1:3).The tested laboratory models include 1:3 scale infilled R/C frames that were built from original material such as steel,concrete and masonry infills(hollow masonry units and mortar).With the same scale,geometry and construction materials used for the construction of a 1:3 scale 5-story three dimensional building.This program consisted of 16 models,5 bare and 11 masonry infilled.all models refer to single-storey one-bay 1:9 scale as for the original structure and a one third of the scale(1:3)as for the prototype(1:3).The reinforced concrete specimens were designed in such a way as to prevent shear failure of the columns.Finally,the present paper was carried out in the Laboratory of Strength of Materials and Structures in the Department of Civil Engineering at Aristotle University of Thessaloniki.
