To solve the problem of life estimation of reinforced concrete （RC） members after fire, an analysis is made of the resistance of RC members after fire. On basis of the resistance, the life of RC members after fire i...To solve the problem of life estimation of reinforced concrete （RC） members after fire, an analysis is made of the resistance of RC members after fire. On basis of the resistance, the life of RC members after fire is analyzed by using JC （Jukes and Cantor） method. Then the calculation models for the resistance and the life estimation of RC members after fire are put forward, and an example analysis proves their reliability and accuracy.展开更多
This study provides a comprehensive analysis of collision and impact problems’ numerical solutions, focusing ongeometric, contact, and material nonlinearities, all essential in solving large deformation problems duri...This study provides a comprehensive analysis of collision and impact problems’ numerical solutions, focusing ongeometric, contact, and material nonlinearities, all essential in solving large deformation problems during a collision.The initial discussion revolves around the stress and strain of large deformation during a collision, followedby explanations of the fundamental finite element solution method for addressing such issues. The hourglassmode’s control methods, such as single-point reduced integration and contact-collision algorithms are detailedand implemented within the finite element framework. The paper further investigates the dynamic responseand failure modes of Reinforced Concrete (RC) members under asymmetrical impact using a 3D discrete modelin ABAQUS that treats steel bars and concrete connections as bond slips. The model’s validity was confirmedthrough comparisons with the node-sharing algorithm and system energy relations. Experimental parameterswere varied, including the rigid hammer’s mass and initial velocity, concrete strength, and longitudinal and stirrupreinforcement ratios. Findings indicated that increased hammer mass and velocity escalated RC member damage,while increased reinforcement ratios improved impact resistance. Contrarily, increased concrete strength did notsignificantly reduce lateral displacement when considering strain rate effects. The study also explores materialnonlinearity, examining different materials’ responses to collision-induced forces and stresses, demonstratedthrough an elastic rod impact case study. The paper proposes a damage criterion based on the residual axialload-bearing capacity for assessing damage under the asymmetrical impact, showing a correlation betweendamage degree hammer mass and initial velocity. The results, validated through comparison with theoreticaland analytical solutions, verify the ABAQUS program’s accuracy and reliability in analyzing impact problems,offering valuable insights into collision and impact problems’ nonlinearities and practical strategies for enhancingRC structures’ resilience under dynamic stress.展开更多
Due to the complicated three-dimensional behaviors and testing limitations of reinforced concrete(RC)members in torsion,torsional mechanism exploration and torsional performance prediction have always been difficult.I...Due to the complicated three-dimensional behaviors and testing limitations of reinforced concrete(RC)members in torsion,torsional mechanism exploration and torsional performance prediction have always been difficult.In the present paper,several machine learning models were applied to predict the torsional capacity of RC members.Experimental results of a total of 287 torsional specimens were collected through an overall literature review.Algorithms of extreme gradient boosting machine(XGBM),random forest regression,back propagation artificial neural network and support vector machine,were trained and tested by 10-fold cross-validation method.Predictive performances of proposed machine learning models were evaluated and compared,both with each other and with the calculated results of existing design codes,i.e.,GB 50010,ACI 318-19,and Eurocode 2.The results demonstrated that better predictive performance was achieved by machine learning models,whereas GB 50010 slightly overestimated the torsional capacity,and ACI 318-19 and Eurocode 2 underestimated it,especially in the case of ACI 318-19.The XGBM model gave the most favorable predictions with R^(2)=0.999,RMSE=1.386,MAE=0.86,andλ=0.976.Moreover,strength of concrete was the most sensitive input parameters affecting the reliability of the predictive model,followed by transverse-to-longitudinal reinforcement ratio and total reinforcement ratio.展开更多
Since most current seismic capacity evaluations of reinforced concrete （RC） frame structures are implemented by either static pushover analysis （PA） or dynamic time history analysis, with diverse settings of the p...Since most current seismic capacity evaluations of reinforced concrete （RC） frame structures are implemented by either static pushover analysis （PA） or dynamic time history analysis, with diverse settings of the plastic hinges （PHs） on such main structural components as columns, beams and walls, the complex behavior of shear failure at beam-column joints （BCJs） during major earthquakes is commonly neglected. This study proposes new nonlinear PA procedures that consider shear failure at BCJs and seek to assess the actual damage to RC structures. Based on the specifications of FEMA-356, a simplified joint model composed of two nonlinear cross struts placed diagonally over the location of the plastic hinge is established, allowing a sophisticated PA to be performed. To verify the validity of this method, the analytical results for the capacity curves and the failure mechanism derived from three different full-size RC frames are compared with the experimental measurements. By considering shear failure at BCJs, the proposed nonlinear analytical procedures can be used to estimate the structural behavior of RC frames, including seismic capacity and the progressive failure sequence of joints, in a precise and effective manner.展开更多
In the last two decades, the study of reinforced concrete (RC) structures elements such as bridge deck slabs, bridge girders, or offshore installations, which?are?subjected to cyclic action typically induced by seismi...In the last two decades, the study of reinforced concrete (RC) structures elements such as bridge deck slabs, bridge girders, or offshore installations, which?are?subjected to cyclic action typically induced by seismic motions has received the attention of many researchers.?Furthermore, the past two decades have witnessed rapid growth in the use of fiber-reinforced polymer (FRP) confining jackets for the strengthening/retrofit of reinforced concrete (RC) columns and beams. Moreover, several theoretical and empirical models?have been proposed for evaluating the?shear strength of beams, columns and beam-to-column joints. In this?paper, an overview of the models currently available in the scientific literature for?evaluating the?shear capacity of?beams, columns and?exterior beam-to-column joints?is reported.?Further, important practical issues which contribute in?shear strengthening of structures with different element types especially RC beams with different strengthening techniques, such as steel plate and FRP laminate are discussed.?Finally,?directions for future research based on the existing gaps of the existing works are presented.展开更多
Annular reinforced concrete(RC) members are commonly used in bridge structures and offshore platforms. These RC members often fail under the combined actions of axial force, bending moment, shear force and torsion loa...Annular reinforced concrete(RC) members are commonly used in bridge structures and offshore platforms. These RC members often fail under the combined actions of axial force, bending moment, shear force and torsion load in hazards of earthquake and wind. It is very important to study the failure mechanism of annular RC members under combined actions. This study proposes a model to analyze the ultimate strength of annular RC members under combined actions using limit failure theory. A new method is established to determine the geometric parameters of the warped failure surface, and the new calculation model for the ultimate strength is obtained using the equilibrium conditions based on the geometric parameters and the stress distribution on the failure surface. The proposed model calculations are compared with a series of experimental results of annular RC members, and they correspond well with the experimental results. The proposed model is feasible for engineering application.展开更多
文摘To solve the problem of life estimation of reinforced concrete （RC） members after fire, an analysis is made of the resistance of RC members after fire. On basis of the resistance, the life of RC members after fire is analyzed by using JC （Jukes and Cantor） method. Then the calculation models for the resistance and the life estimation of RC members after fire are put forward, and an example analysis proves their reliability and accuracy.
基金the authority of the National Natural Science Foundation of China(Grant Nos.52178168 and 51378427)for financing this research work and several ongoing research projects related to structural impact performance.
文摘This study provides a comprehensive analysis of collision and impact problems’ numerical solutions, focusing ongeometric, contact, and material nonlinearities, all essential in solving large deformation problems during a collision.The initial discussion revolves around the stress and strain of large deformation during a collision, followedby explanations of the fundamental finite element solution method for addressing such issues. The hourglassmode’s control methods, such as single-point reduced integration and contact-collision algorithms are detailedand implemented within the finite element framework. The paper further investigates the dynamic responseand failure modes of Reinforced Concrete (RC) members under asymmetrical impact using a 3D discrete modelin ABAQUS that treats steel bars and concrete connections as bond slips. The model’s validity was confirmedthrough comparisons with the node-sharing algorithm and system energy relations. Experimental parameterswere varied, including the rigid hammer’s mass and initial velocity, concrete strength, and longitudinal and stirrupreinforcement ratios. Findings indicated that increased hammer mass and velocity escalated RC member damage,while increased reinforcement ratios improved impact resistance. Contrarily, increased concrete strength did notsignificantly reduce lateral displacement when considering strain rate effects. The study also explores materialnonlinearity, examining different materials’ responses to collision-induced forces and stresses, demonstratedthrough an elastic rod impact case study. The paper proposes a damage criterion based on the residual axialload-bearing capacity for assessing damage under the asymmetrical impact, showing a correlation betweendamage degree hammer mass and initial velocity. The results, validated through comparison with theoreticaland analytical solutions, verify the ABAQUS program’s accuracy and reliability in analyzing impact problems,offering valuable insights into collision and impact problems’ nonlinearities and practical strategies for enhancingRC structures’ resilience under dynamic stress.
基金The authors are extremely grateful to the funds including the National Natural Science Foundation of China(Grant No.51808258)the Fundamental Research Funds for the Central Universities(No.2022QN1031).
文摘Due to the complicated three-dimensional behaviors and testing limitations of reinforced concrete(RC)members in torsion,torsional mechanism exploration and torsional performance prediction have always been difficult.In the present paper,several machine learning models were applied to predict the torsional capacity of RC members.Experimental results of a total of 287 torsional specimens were collected through an overall literature review.Algorithms of extreme gradient boosting machine(XGBM),random forest regression,back propagation artificial neural network and support vector machine,were trained and tested by 10-fold cross-validation method.Predictive performances of proposed machine learning models were evaluated and compared,both with each other and with the calculated results of existing design codes,i.e.,GB 50010,ACI 318-19,and Eurocode 2.The results demonstrated that better predictive performance was achieved by machine learning models,whereas GB 50010 slightly overestimated the torsional capacity,and ACI 318-19 and Eurocode 2 underestimated it,especially in the case of ACI 318-19.The XGBM model gave the most favorable predictions with R^(2)=0.999,RMSE=1.386,MAE=0.86,andλ=0.976.Moreover,strength of concrete was the most sensitive input parameters affecting the reliability of the predictive model,followed by transverse-to-longitudinal reinforcement ratio and total reinforcement ratio.
文摘Since most current seismic capacity evaluations of reinforced concrete （RC） frame structures are implemented by either static pushover analysis （PA） or dynamic time history analysis, with diverse settings of the plastic hinges （PHs） on such main structural components as columns, beams and walls, the complex behavior of shear failure at beam-column joints （BCJs） during major earthquakes is commonly neglected. This study proposes new nonlinear PA procedures that consider shear failure at BCJs and seek to assess the actual damage to RC structures. Based on the specifications of FEMA-356, a simplified joint model composed of two nonlinear cross struts placed diagonally over the location of the plastic hinge is established, allowing a sophisticated PA to be performed. To verify the validity of this method, the analytical results for the capacity curves and the failure mechanism derived from three different full-size RC frames are compared with the experimental measurements. By considering shear failure at BCJs, the proposed nonlinear analytical procedures can be used to estimate the structural behavior of RC frames, including seismic capacity and the progressive failure sequence of joints, in a precise and effective manner.
文摘In the last two decades, the study of reinforced concrete (RC) structures elements such as bridge deck slabs, bridge girders, or offshore installations, which?are?subjected to cyclic action typically induced by seismic motions has received the attention of many researchers.?Furthermore, the past two decades have witnessed rapid growth in the use of fiber-reinforced polymer (FRP) confining jackets for the strengthening/retrofit of reinforced concrete (RC) columns and beams. Moreover, several theoretical and empirical models?have been proposed for evaluating the?shear strength of beams, columns and beam-to-column joints. In this?paper, an overview of the models currently available in the scientific literature for?evaluating the?shear capacity of?beams, columns and?exterior beam-to-column joints?is reported.?Further, important practical issues which contribute in?shear strengthening of structures with different element types especially RC beams with different strengthening techniques, such as steel plate and FRP laminate are discussed.?Finally,?directions for future research based on the existing gaps of the existing works are presented.
基金the National Natural Science Foundation of China(No.51178265)
文摘Annular reinforced concrete(RC) members are commonly used in bridge structures and offshore platforms. These RC members often fail under the combined actions of axial force, bending moment, shear force and torsion load in hazards of earthquake and wind. It is very important to study the failure mechanism of annular RC members under combined actions. This study proposes a model to analyze the ultimate strength of annular RC members under combined actions using limit failure theory. A new method is established to determine the geometric parameters of the warped failure surface, and the new calculation model for the ultimate strength is obtained using the equilibrium conditions based on the geometric parameters and the stress distribution on the failure surface. The proposed model calculations are compared with a series of experimental results of annular RC members, and they correspond well with the experimental results. The proposed model is feasible for engineering application.
