Seismic fragility analysis of three-tower cable-stayed bridges with different connection configurations

Seismic fragility analysis of three-tower cable-stayed bridges with three different structural systems,including rigid system(RS),floating system(FS),and passive energy dissipation system(PEDS),is conducted to study the effects of connection configurations on seismic responses and fragilities.Finite element models of bridges are established using OpenSees.A new ground motion screening method based on the statistical characteristic of the predominant period is proposed to avoid irregular behavior in the selection process of ground motions,and incremental dynamic analysis(IDA)is performed to develop components and systems fragility curves.The effects of damper failure on calculated results for PEDS are examined in terms of seismic response and fragility analysis.The results show that the bridge tower is the most affected component by different structural systems.For RS,the fragility of the middle tower is significantly higher than other components,and the bridge failure starts from the middle tower,exhibiting a characteristic of local failure.For FS and PEDS,the fragility of the edge tower is higher than the middle tower.The system fragility of RS is higher than FS and PEDS.Taking the failure of dampers into account is necessary to obtain reliable seismic capacity of cable-stayed bridges.

Dynamic Response of Sea-Crossing Rail-cum-Road Cable-Stayed Bridge Influenced by Random Wind–Wave–Undercurrent Coupling

Sea-crossing bridges are affected by random wind–wave–undercurrent coupling loads, due to the complex marine environment. The dynamic response of long-span Rail-cum-Road cable-stayed bridges is particularly severe under their influence, potentially leading to safety problems. In this paper, a fluid–structure separation solution method is implemented using Ansys–Midas co-simulation, in order to solve the above issues effectively while using less computational resources. The feasibility of the method is verified by comparing the tower top displacement response with relevant experimental data. From time and frequency domain perspectives, the displacement and acceleration responses of the sea-crossing Rail-cum-Road cable-stayed bridge influenced by wave-only, wind–wave, and wind–wave–undercurrent coupling are comparatively studied. The results indicate that the displacement and acceleration of the front bearing platform top are more significant than those of the rear bearing platform. The dominant frequency under wind–wave–undercurrent coupling is close to the natural vibration frequencies of several bridge modes,such that wind–wave–undercurrent coupling is more likely to cause a resonance effect in the bridge. Compared with the wave-only and wind–wave coupling, wind–wave–undercurrent coupling can excite bridges to produce larger displacement and acceleration responses: at the middle of the main girder span, compared with the wave-only case, the maximum displacement in the transverse bridge direction increases by 23.58% and 46.95% in the wind–wave and wind–wave–undercurrent coupling cases, respectively;at the tower top, the variation in the amplitude of the displacement and acceleration responses of wind–wave and wind–wave–undercurrent coupling are larger than those in the wave-only case, where the acceleration change amplitude of the tower top is from-0.93 to 0.86 m/s^(2) in the waveonly case, from-2.2 to 2.1 m/s^(2) under wind–wave coupling effect, and from-2.6 to 2.65 m/s^(2) under wind–wave–undercurrent coupling effect, indicating that the tower top is mainly affected by wind loads, but wave and undercurrent loads cannot be neglected.

Mechanical performance evaluation of a new type of cable-stayed beam-arch combination bridge based on field tests

In order to study the mechanical performance of a new type of cable-stayed beam-arch combination bridge, the results of field static and dynamic load tests are comparatively analyzed with numerical results based on the Jingyi bridge straddling the Daxi River in Yixing. First, the test scheme, tasks, the corresponding measure method, as well as the relevant codes are described. Secondly, two sets of three- dimensional finite element models are established. One is Ansys which uses the solid element and the other is Midas which adopts the beam element. Finally, the experimental and analytical results are comparatively analyzed, and they show an agreement with each other. The results show that the bridge possesses adequate load-carrying capacity under all static load cases, but the capacity of dissipating external input energy is insufficient due to the relatively smaller damping ratio. The study results can provide a reference for further study and optimization of this type of bridge. Calibrated finite-element models that reflect the real conditions can be used as a baseline for future maintenance of the bridge.

Data-driven methods for predicting the representative temperature of bridge cable based on limited measured data

Cable-stayed bridges have been widely used in high-speed railway infrastructure.The accurate determination of cable’s representative temperatures is vital during the intricate processes of design,construction,and maintenance of cable-stayed bridges.However,the representative temperatures of stayed cables are not specified in the existing design codes.To address this issue,this study investigates the distribution of the cable temperature and determinates its representative temperature.First,an experimental investigation,spanning over a period of one year,was carried out near the bridge site to obtain the temperature data.According to the statistical analysis of the measured data,it reveals that the temperature distribution is generally uniform along the cable cross-section without significant temperature gradient.Then,based on the limited data,the Monte Carlo,the gradient boosted regression trees(GBRT),and univariate linear regression(ULR)methods are employed to predict the cable’s representative temperature throughout the service life.These methods effectively overcome the limitations of insufficient monitoring data and accurately predict the representative temperature of the cables.However,each method has its own advantages and limitations in terms of applicability and accuracy.A comprehensive evaluation of the performance of these methods is conducted,and practical recommendations are provided for their application.The proposed methods and representative temperatures provide a good basis for the operation and maintenance of in-service long-span cable-stayed bridges.

Seismic Performance of Prefabricated Continuous Girder Bridge

Bearings are the weak link in the seismic design of bridges.Using a continuous girder bridge as an example,it is demonstrated that bearing damage should be considered under large earthquake conditions.The bearing,acting as a fuse-type unit,can be designed to be preferentially damaged to effectively control the displacement of the beam and the response at the base of the pier during an earthquake.

Energy-based damage assessment of continuous-span reinforced concrete highway bridges

This paper conducts a comparative study on seismic damage to reinforced concrete(RC)bridges,using three damage models:Park and Ang,Hindi and Sexsmith,and input energy-based damage(IEBD)indices,and presents a global cumulative damage model based on the IEBD index to establish a practical damage assessment of an overall bridge system.A series of RC bridges are studied under seismic loadings,and to compare the efficiency and reliability of the damage indices,damage curves of RC piers are developed,and damage levels of piers are calculated at design basis earthquake(DBE)and maximum considered earthquake(MCE)levels.The global cumulative damage index is calculated for bridge models regarding damage values of components.The results indicate that the IEBD index shows a gradual progression of damage and provides reasonable values for different damage levels of piers compared to two other damage indices.Moreover,the global cumulative damage index shows the impact of induced damage to a certain component regarding the damage level of the overall bridge system.Moreover,this new approach is a relatively simple and practical tool for seismic damage assessment of RC bridge systems,which can be implemented in finite element models,particularly in the absence of experimental data.

Process Monitoring and Terminal Verification of Cable-Stayed Bridges with Corrugated Steel Webs under Contruction

In this paper,the construction process of a cable-stayed bridge with corrugated steel webs was monitored.Moreover,the end performance of the bridge was verified by load test.Owing to the consideration of the bridge structure safety,it is necessary to monitor the main girder deflection,stress,construction error and safety state during construction.Furthermore,to verify whether the bridge can meet the design requirements,the static and dynamic load tests are carried out after the completion of the bridge.The results of construction monitoring show that the stress state of the structure during construction is basically consistent with the theoretical calculation and design requirements,and both meet the design and specification requirements.The final measured stress state of the structure is within the allowable range of the cable-stayed bridge,and the stress state of the structure is normal and meets the specification requirements.The results of load tests show that the measured deflection values of the mid-span section of the main girder are less than the theoretical calculation values.The maximum deflection of the girder is−20.90 mm,which is less than−22.00 mm of the theoretical value,indicating that the girder has sufficient structural stiffness.The maximum impact coefficient under dynamic load test is 1.08,which is greater than 1.05 of theoretical value,indicating that the impact effect of heavy-duty truck on this type of bridge is larger.This study can provide important reference value for construction and maintenance of similar corrugated steel web cable-stayed bridges.

Longitudinal forces of continuously welded track on high-speed railway cable-stayed bridge considering impact of adjacent bridges

A proven beam-track contact model was used to analyze the track-structure interaction of CWR (continuously welded track) on bridge. Considering the impact of adjacent bridges, the tower-cable-track-beam-pier-pile finite element model of the cable-stayed bridge was established. Taking a bridge group including 40-32m simply-supported beam and (32+80+112)m single-tower cable-stayed bridge and 17-32m simply-supported beam on the Kunming-Shanghai high-speed railway as an example, the characteristics of CWR longitudinal force on the cable-stayed bridge were studied. It is shown that adjacent bridges must be considered in the calculation of the track expansion force and bending force on cable-stayed bridge. When the span amount of adjacent bridges is too numerous, it can be simplified as six spans; the fixed bearing of adjacent simply-supported beams should be placed on the side near the cable-stayed bridge; the track expansion device should be set at the bridge tower to reduce the track force near the bridge abutment.

Internal Force Distribution in Steel-Concrete Composite Structure for Pylon of Cable-Stayed Bridge

Adopting a steel-anchor beam and steel corbel composite structure in the anchor zone on pylon is one of the key techniques for the design of Jintang bridge, a cable-stayed bridge in Zhoushan, China. In order to ensure the safety of the steel-concrete composite structure, a stud connector model for the joint section was put forward. Experiments were conducted to obtain the relation between load and slip of specimen, the failure pattern of stud connector, the yield bearing capacity and ultimate bearing capacity of a single stud, etc. The whole process of the structural behavior of the specimen was comprehensively analyzed. The features of the internal force distribution in the steel-concrete composite structure and the strain distribution of stud connector under different loads were emphatically studied. The test results show that the stud connector is applicable for the steel-concrete composite structure for pylon of Jintang bridge. The stud has a good ductility performance and a obvious yield process before its destruction. The stud connector basically works in a state of elasticity under a load less than the yield load.

Research review on steel–concrete composite joint of railway hybrid girder cable-stayed bridges

Purpose–This study aims to research the development trend,research status,research results and existing problems of the steel–concrete composite joint of railway long-span hybrid girder cable-stayed bridge.Design/methodology/approach–Based on the investigation and analysis of the development history,structure form,structural parameters,stress characteristics,shear connector stress state,force transmission mechanism,and fatigue performance,aiming at the steel–concrete composite joint of railway long-span hybrid girder cable-stayed bridge,the development trend,research status,research results and existing problems are expounded.Findings–The shear-compression composite joint has become the main form in practice,featuring shortened length and simplified structure.The length of composite joints between 1.5 and 3.0 m has no significant effect on the stress and force transmission laws of the main girder.The reasonable thickness of the bearing plate is 40–70 mm.The calculation theory and simplified calculation formula of the overall bearing capacity,the nonuniformity and distribution laws of the shear connector,the force transferring ratio of steel and concrete components,the fatigue failure mechanism and structural parameters effects are the focus of the research study.Originality/value–This study puts forward some suggestions and prospects for the structural design and theoretical research of the steel–concrete composite joint of railway long-span hybrid girder cable-stayed bridge.

Analysis of precision and error of cable force identification of cable-stayed bridge

In this paper,in order to improve the precision of cable force identification of a practical cable-stayed bridge and consider some precision problems of vibration method in surveying the cable force in the engineering application,firstly,three calculation methods for the cable force measurement are analyzed and contrasted;secondly,using the method of finite element numerical simulation and the theory of the error analysis,the effect of both bending rigidity and constraint conditions on simple formula of vibration method is investigated;and the dependence of the precision of cable frequency identification on spectrum resolution,sampling time,and the number of sampling points is studied;Finally,fundamental frequency method,frequency difference method,and peak value method are applied to the cable force calculation of a practical project;and their computational precision and error are contrasted and analyzed.It is observed that it is essential to take into account the effect of every factor on the precision of the cable force identification and make it possible to identify the cable force more accurate by vibration method;and that it simultaneously provides an effective basis for the development of a high-precision equipment.

Research development of digital maintenance and management system for long-span cable-stayed bridges

Digital cable-stayed bridge maintenance and management system （DCBMS） was developed for the need of maintenance and management of long-span cable-stayed bridges. In this paper, the major functions and theoretical application of eight modules were systematically stated with the background of Harbin Songhua River cable-stayed bridge, which include data management module, inspection and measurement module, assessment module, finite dement analysis module, disease diagnosis and prediction module, maintenance module, query module and help module. By analyzing and calculating the data from manual inspection database, basic database and health monitoring subsystem, DCBMS can accomplish the functions like life prediction, disease diagnosis, comprehensive assessment, maintenance and management of bridges. Therefore, the maintenance and management of long-span cable-stayed bridges can be made digital, professional and scientific. By running this system, a real-time and specific technical guidance can be provided for the maintainers and managers of long- span cable-stayed bridges.

Health Monitoring-Based Assessment of Reinforcement with Prestressed Steel Strand for Cable-Stayed Bridge

This paper presents the method of reinforcing main girder of reinforced concrete cable-stayed bridge with prestressed steel strands.To verify the effectiveness of external prestressed strand reinforcement method.Static load tests and health monitoring-based assessment were carried out before and after reinforcement.Field load test shows that the deflection and stress values of the main girder are reduced by 10%~20%after reinforcement,and the flexural strength and stiffness of the strengthened beam are improved.The deflection and strain data of health monitoring of the specified section are collected.The deflection of the second span is 4 mm~10 mm,the strain range of the upper edge of the second span is-10με~-40με,and the strain range of the lower edge is 30με~75με.These values show the deflection and strain values fluctuate within a prescribed range,verifying the safety of the bridge.The reinforcement method of prestressed steel strand is feasible and effective.It can provide reference basis for the application of external prestressed strand reinforcement technology in similar projects.

Analysis of Key Factors in Cable Force Calculation for Cable-Stayed Bridges

Three methods for calculating cable force （analytic method, fitting method and finite element method） are analyzed and compared. The effects of boundary condition, spectrum resolution, sampling time, and number of sampling points on the precision of cable force identification are discussed, and error analysis is conducted. The results of three methods applied to a practical project are significantly less than the design value. Comparatively, the result of finite element method is the closest to the design value. Moreover, their computational precision and error are compared and analyzed. The precision of frequency identification of cables, long cables in particular, is strongly affected by frequency resolution. If the frequency resolution is included in calculating the cable force, the identification error can be reduced greatly.

Probability evaluation method for cable safety of long-span cable-stayed bridges

A method of cable safety analysis is proposed for safety evaluation of long-span cable-stayed bridges. The Daniels＇ effect and the probability of broken wires in the cable are introduced to develop the cable strength model and the reliability assessment technique for long-span cable-stayed bridges based on the safety factors analysis of stay cables in service. As an application of the proposed model, the cable safety reliability of the cable No. 25 of Zhaobaoshan cable-stayed bridge in China is calculated. The effects of various parameters on the estimated cable safety reliability are investigated. The results indicate that the proposed method can be used to assess the safety level of stay cables in cable-stayed bridges effectively. The Daniels＇ effect should be taken into account for assessment, and the probability of broken wires can be used to simulate the deterioration of stay cables in service.

Application of uncertain type of AHP to condition assessment of cable-stayed bridges

In order to guarantee the safety service and life-span of long-span cable-stayed bridges, the uncertain type of analytic hierarchy process （AHP） method is adopted to access the bridge condition. The correlative theory and applied objects of uncertain type of AHP are introduced, and then the optimal transitive matrix method is chosen to calculate the interval number judgment matrix, which makes the weights of indices more reliable and accurate. Finally, with Harbin Songhua River Cable-Stayed Bridge as an example, an index system and an assessment model are proposed for the condition assessment of this bridge, and by using uncertain type of AHP, the weights of assessment indices are fixed and the final assessment results of the bridge are calculated, which proves the feasibility and practicability of this method. The application of this assessment method can provide the scientific basis for maintenance and management of long-span cable-stayed bridges.

DAMAGE ANALYSIS AND LOCATION OF RUNYANG BRIDGE USING MULTI-LAYER PERCEPTRON

A damage location method using multi-layer perceptron （MLP） is developed to diagnose the cable damage of a real long span cable-stayed bridge. Firstly, the damage patterns are defined based on dynamical calculation. The analysis of damage pattern reveals that the damage patterns caused by different damage locations have inherent distinctness, while the damage extent only linearly amplifies the damage pattern curves. And 4th, 6th and 7th order frequencies are canceled from the patterns because of their insensitiveness to cable damage. Then a MLP network is designed by trail-error method to describe the 7-D mapping space of damage pattern. Identification results prove that the properly organized MLP can grasp the damage pattern and identify the damage location.

基于新的改进Bouc-Wen模型的预制RC桥墩滞回模型研究

Bouc-Wen-Baber-Noori(BWBN)模型是改进的Bouc-Wen模型。BWBN模型可以较好地描述钢筋混凝土结构在强震作用下的捏缩效应,但由于BWBN模型中“捏缩效应”函数复杂且参数较多,其计算效率较低。针对该问题,该文基于近似狄拉克δ函数构建更简单、高效的“捏缩效应”函数,进而提出了新的改进Bouc-Wen(MBW)模型,它可以用更少的参数来实现捏缩效应。基于预制RC桥墩的拟静力试验数据来验证MBW模型的有效性,利用MATLAB遗传算法工具箱对BWBN模型和MBW模型进行参数识别,结果表明,该文提出的MBW模型具有更高的计算精度。

粘铝合金板加固RC梁抗弯性能试验及正截面承载力

为了探讨铝合金板厚度与端部U形铝合金箍板构造对RC梁破坏机理及抗弯性能的影响,对16根铝合金板加固RC梁进行了4点弯曲静力加载试验。在试验梁底铝合金板的表面以及试验梁跨中截面的顶面、侧面粘贴应变片,在试验梁底跨中、梁顶两端支座布置百分表。为了推导铝合金板加固RC梁的正截面承载力计算式,基于试验得到的破坏机理,通过引入6个基本假定,分析了5种不同破坏模式的相对受压区高度。建立了各破坏模式下铝合金板加固RC梁的正截面承载力计算式,并将其与引入文献中的试验结果进行了对比分析。结果表明:试件破坏形态包括适筋破坏、端部铝合金板与结构胶剥离、端部铝合金板与梁剥离及中部铝合金板剥离4种情况;当端部设置U形铝合金箍板时,可有效抑制端部铝合金板发生剥离,使钢筋与铝合金板的材料性能得到充分发挥,试件承载力与延性明显提升;当铝合金板厚度分别为2~6 mm时,试件承载力随铝合金板厚度的增加而提高;端部设置U形铝合金箍板可有效防止端部铝合金板发生剥离,但试件仍可能会出现中部铝合金板剥离现象;当试件出现适筋破坏特征时,试件抗弯承载力的计算值与试验值比值均在1以下。本研究所提计算式具有明显的规律性和适用性,可为工程实际设计提供参考。

变滞回性能阻尼器的抗震性能及其在RC排架墩中的应用

为了实现分级保护主体结构同时减小传统耗能阻尼器在强震作用下的残余变形的目的,提出一种基于形状记忆合金(shape memory alloy,SMA)板环的新型变滞回性能阻尼器(variable hysteresis performance damper based on shape memory alloy,SMA-VHD)。首先阐明了新型阻尼器的基本构造,揭示了其变滞回性能工作机理和自复位原理。通过对SMA板材进行材性试验确定了SMA板材的关键性能参数,进而建立阻尼器精细化有限元模型,系统研究阻尼器的滞回性能及参数影响规律。最后将新型阻尼器应用于RC排架墩中,通过动力时程分析研究附加阻尼器桥墩结构的分阶段抗震性能。研究结果表明:SMA板材应力应变关系呈“旗帜型”,具有良好的自复位能力;SMA-VHD滞回曲线呈现明显分级平台,随着阻尼器变形的增加,其滞回曲线由饱满的矩形变为具有自复位功能的“旗帜型”,表明该阻尼器具有变滞回性能的特性;将SMA-VHD应用到RC排架墩中,可有效实现结构的分级抗震,提高桥墩结构的抗震性能水平。