Remove cooking fume using catalytic combustion over Pt/La-Al_2O_3

Five monolithic catalysts with low noble metal content were prepared by irnmerge method （Pt/γ=Al2O3, Pt/La-Al2O3, Pt/YSZ-AI203, Pt＋Pd/La-Al2O3 and Pd/La-Al2O3） and their activity measurements were carried out in a conventional fixed-bed flow reactor. The results show that La-Al2O3 can promote activity of the prepared catalysts and can decrease the complete conversion temperature of cooking fume. The Pt/La-Al2O3 catalyst has the highest activity and can be applied in wide range of gas hourly space velocity （GHSV）. Some characterizations （XRD, TPR） were carried out with the objective to explain differences in catalytic behaviors. The prepared catalyst showed a great potential for application.

Clinical Observation on Influence of Chinese Medicines for Promoting Blood Circulation to Remove Blood Stasis on FIB and DD in Plasma of Patients with Cerebral Thrombosis

Objective: to study the influence of Chinese medicines for promoting blood circulation to remove blood stasis on fibrinogen (FIB) and D-dimer (DD) in plasma of patients with cerebral thrombosis. Method: 73 inpatients with acute cerebral thrombosis were randomly divided into a control group of 34 cases and a treatment group of 39 cases. The content of FIB and DD in plasma was detected before treatment and on the 7th and 14th days after treatment. Result: FIB content in plasma after treatment was lower than that before treatment in the control group (P<0.01) and more remarkable in the treatment group (P<0.001). There was an obvious difference in DD content before and after treatment in both groups. DD content on the 7th and 14th days after treatment in the treatment group was obviously higher than that in the control group (P<0.01 and P<0.05 respectively). Conclusion: Chinese medicines for promoting blood circulation to remove blood stasis can reduce the FIB content in plasma of patients with cerebral thrombosis, raise the DD content in plasma, cause the peak of DD content appear earlier and obviously improve hypercoagulability of blood in patients with cerebral thrombosis.

Remove volatile organic compounds(VOCs) with membrane separation techniques

Membrane separation, a new technology for removing VOCs including pervaporation, vapor permeation, membrane contactor, and membrane bioreactor was presented. Comparing with traditional techniques, these special techniques are an efficient and energy saving technology. Vapor permeation can be applied to recovery of organic solvents from exhaust streams. Membrane contactor could be used for removing or recovering VOCs from air or wastewater. Pervaporation and vapor permeation are viable methods for removing VOCs from wastewater to yield a VOC concentrate which could either be destroyed by conventional means, or be recycled for reuse.

AXIAL HEAT CONDUCTION MODEL TO PREDICT MAXIMUM HEAT REMOVE OF MINIATURE HEAT PIPE BASED ON GREY MODEL THEORY

Computer chip is always accompanied by the increase of heat dissipation and miniaturization. The miniature heat pipes are widely used in notebook computer to resolve the heat dissipation problems. Maximum heat removed model of miniature heat pipes building by grey model is presented. In order to know the foundation for modeling, the smooth grade of error examination is inquired and the accuracy of grey relational grade is verified. The model can be used to select a suitable heat pipes to solve electric heat problems in the future. Final results show that the grey model only needs four experiment data and its error value is less than 10%, further, it is better than computational fluid dynamics （CFD） model.

Treatment of Hypertensive Cerebral Hemorrhage by Activating Blood Circulation to Remove Stasis

The treatment of hy-pertensive cerebral hemorrhage(HCH)by activatingblood circulation to removestasis(ABCRS)is a newtherapeutic approach,which is initiated by clinical specialists of TCM andintegrative Chinese andwestern medicine.Al-though it is not a flawless

Formation and Removement Mechanism of Haze Defects on（111）p－type Silicon Wafers

The haze defects on p-type (111) silicon wafers were investigated by means of chemical etching, Fouriertransform infra-red microscopy (FTIR), spreading resistance measurement. secondary ion mass spectroscopy(SLMS), transmission electron microscopy (TEM) equipped with an energy-dispersive X-ray spectrometer(EDX). The haze defects are the precipitates of silicide of metal impurities (Fe, Ni) on the wafer surface.The formation of haze defects can efficiently be inhibited by utilizing the technology of fast neutronirradiation combined with the internal gettering (IG), and then, the formation and removement mechanismof the haze defects have been discussed in this paper.

The Application of Cold Banding Technology for Dust Removed From BOF Gas Using Dry Dedusting Technology

Firstly, physical and chemical properties of dust removed from BOF gas are analyzed, and then the cold banding technology of dust removed from BOF gas and its application are introduced. Tests have proved that using cooled agglomerated pellets made of the dust removed from BOF gas and small amounts of modified starch as a coolant and slagging agent in steel production can bring about considerable economic, social and environmental benefits.

Model for Quantitative Evaluation and Prediction of the Concentration of Phosphorus Removed during Pyro-Hydro Beneficiation of Haematite

This paper presents a model derived for quantitative evaluation and prediction of the concentration of phosphorus removed during pyro-hydro beneficiation of iron oxide ore. Potassium hydroxide was used as the leaching solution and the reaction vessel containing the solution and ore was heated at a temperature of 600℃ for 10 minutes. The results of the investigation indicates that the model;P = (e0.7827) S predicts the concentration of phosphorus removed, based on the concentration of sulphur simultaneously removed. It was observed that the validity of the model is rooted in the expression lnP = lnN + lnS where both sides of the expression are approximately equal to 4. The maximum deviation of the model-predicted concentration of removed phosphorus from the corresponding concentration obtained from the experiment was less than 3%. The concentrations of phosphorus removed per unit mass-input of iron oxide ore as obtained from experiment and derived model are 0.8917 and 1.0354 mg/kg g-1 respectively. Similarly, the concentrations of phosphorus removed per unit concentration of removed sulphur as obtained from experiment and derived model are 1.8838 and 2.1874 mg/kg (mg/kg)-1 respectively. This implies that the concentration of phosphorus removed is approximately equal to the concentration of simultaneously removed sulphur during the beneficiation process.

Voices of Africa The Africa Dialogues event aims to remove misunderstandings about Africa

Africa is a continent with many development challenges. Poverty, inadequate healthcare and educa-tional deficits are all obstacles to its development. However, Africa is also a continent that has confidence in its ability to realize its full development potential, be it economic, cultural or political.

PDF Password Remover限时免费

虽然现在免费、好用的软件已经很多，但更多的是需要注册或者购买才能使用的商业软件。要想享用这些商业软件，难道我们就只能从羞涩的囊中再掏出一笔？不必!PCD除了会尽量为大家介绍免费、开源的好软件之外，还会时刻关注那些正在搞活动的商业软件，尽量为大家争取到免费的福利。

Can E-Shoppers Return Items Removed From Packaging?

One year has passed since the revised Law on the Protection of the Rights and Interests of Consumers came into effect on March 15, 2014, the World Consumer Rights Day. Following the changes, consumers can return goods they are dissatisfied with and get an unconditional refund within seven days of purchase. This applies to not only Internet shopping but also TV- and telephone-based sales.

Mechanism to remove oxide inclusions from molten aluminum by solid fluxes refining method

A novel flux charging method and a crucible quenching method were employed to study the mechanism of solid fluxes refining method regarding the removal of oxide inclusions(Al_2O_3) from molten aluminum. Electrochemical polishing method was adopted to prepare surfaces of the samples. Through experiments, the morphology of the residual solidified flux in the solidified samples as well as the wetting action of the molten flux during refining were observed for the first time. Three wetting regimes denoted by absorbing regime, engulfing regime and penetration regime correlating with the removal of oxide films(the most typical and common oxide inclusions in molten aluminum) were proposed in terms of different types and distributions of oxide films and different size ratios of the molten flux to oxide films. Particularly, from a thermodynamic point of view, for the first time, the penetration regime provided concrete evidence that the practical oxide inclusions can be wet by molten flux under ambient fluid of molten aluminum. A spreading model was proposed, according to which ingredients and size parameters of practical solid fluxes can be optimized.

A modified approach to actively remove high viscosity silicone oil through 23-gauge cannula

AIM：To report a simple approach to actively remove high viscosity silicone oil through a 23-gauge cannula via pars plana.METHODS：Forty-eight eyes of 48 patients underwent silicone oil（5700 centistokes） removal（SOR） were enrolled.A section of blood transfusion set was prepared to connect a standard 23-gauge cannula and vitrectomy machine.Silicone oil was removed with suction of500-mm Hg vacuum through the cannula.Main outcome measures were SOR duration,number of sutured sites,intraocular pressure（IOP）,best-corrected visual acuity（BCVA）,and complications.RESULTS：Silicone oil was successfully removed in all cases.The mean SOR time was 5.70±0.85 min.Nine eyes（18.75%） needed suture partial sclerotomies.No intraoperative complications were noted.Transient hypotony（≤8 mm Hg） was seen in 3 eyes（6.25%） on postoperative day 1,but all resolved within 1wk.Retinal reattachment was achieved in all cases and no other postoperative complications were noted during 3-month following-up.BCVA at the final visit improved or stabilized in all patients comparing to the preoperative level.CONCLUSION：Active removal of high viscosity silicone oil through a 23-gauge instrument cannula jointed with blood transfusion set is a practical and reliable technique when considering two sides of efficacy and safety.

Using a zeolite medium biofilter to remove organic pollutant and ammonia simultaneously

A pilot scale zeolite medium biological aerated filter(ZBAF) was designed and used to treat municipal wastewater. It showed that ZBAF could simultaneously remove chemical oxygen demand(COD), ammonia-N and turbidity to satisfied degree at a hydraulic retention time(HRT) of 0.95 h. Their average removal efficiencies were 73.9%, 88.4% and 96.2% with the corresponding average effluent concentrations of 43.4 mg/L, 3.5 mg/L and 3.7 NTU, respectively. These effluent items met with the water quality standard of the treated water reused for cooling water. The COD removal volumetric loading rate increased proportionally with its applied volumetric loading rate with its maximum of 7.1 kg/(m 3·d). Ammonia-N removal loading rate also increased proportionally with its applied loading rate at HRT of longer than 0.95 h and the feasible maximum removal loading rate was 0.9 kg/(m 3·d). The COD loading rate did not affect the ammonia-N removal efficiency significantly when it was lower than 5.5 kg/(m 3·d). ZBAF has good application prospect for its low cost and high removal efficiency in the future.

Effects of structural and operating parameters of ECP fan on dust particles removed in the transition flow regime

An enclosed cyclone passageway(ECP)dust-collecting fan is discussed.The ECP fan separates dust by centrifugal force originating from a driven spiral airflow,and its design takes the constraints of Chinese underground coal mines into consideration.Using the force equilibrium law,a general equation for dust removal in the centrifugal dust removal section(CDRS)of the ECP fan is deduced.This general equation is simplified using the CDRS structure and the fan operating parameters and is analysed numerically.The attractive results show that increases in the airflow rate of the fan,the structural ratio of the ECPs and the radius of the extended axis can improve the dust removal performance of the CDRS.Furthermore,the effects of the structural ratio and the radius on dust removal dominate over that of the flow rate,and the effect of the structural ratio is more significant than that of the radius.

Iron-Modification of Pyroclastic Material from PCCVC Eruption (Chile): Characterization and Application to Remove Arsenic from Groundwater

Pyroclastic material from the PCCVC eruption (Chile) was modified with iron (III) solutions leading to the formation of ferrihydrite surface deposits. The aim of the chemical treatment was to prepare an adsorbent to remove arsenic from water by using low-cost mineral wastes. Physicochemical characterization of original and modified materials was carried out by XRD, BET-N2 adsorption, SEM-EDS microscopy and ICP-AES chemical analysis. The modified ash revealed that the increase of bulk iron content was close to 5% (expressed as Fe2O3) whereas surface values were 20.6% Fe2O3. Surface properties showed an increase of BET specific surface with prevalence of mesopores and an increase of total pore volume attributed to presence of nanoscopic iron phase. Kinetic and equilibrium studies were directed to optimize the operative conditions related to the material adsorptive capacity for removing arsenate species. Hence, the adsorbent dose, contact time, pH, stirring and sedimentation were evaluated in batch process. The optimal adsorption dose was 40 g ·L-1 and the solid-liquid contact time was stirring (1 h) and sedimentation (23 h), enough to ensure an adequate turbidity value valid for a pH range between 3.77 and 8.95. The analysis of the isotherm equilibrium by using the Langmuir linear method showed a R2 = 0.995 value. The performance of the treatment to remove arsenic by using a cost-effective adsorbent prepared from volcanic material is a promising technology to apply in the environmental field.