An improved electromechanical model of the RF MEMS(radio frequency microelec- tromechanical systems)switches is introduced,in which the effects of intrinsic residual stress from fabrication processes,axial stress due ...An improved electromechanical model of the RF MEMS(radio frequency microelec- tromechanical systems)switches is introduced,in which the effects of intrinsic residual stress from fabrication processes,axial stress due to stretching of beam,and fringing field are taken into account. Four dimensionless numbers are derived from the governing equation of the developed model.A semi- analytical method is developed to calculate the behavior of the RF MEMS switches.Subsequently the influence of the material and geometry parameters on the behavior of the structure is analyzed and compared,and the corresponding analysis with the dimensionless numbers is conducted too.The quantitative relationship between the presented parameters and the critical pull-in voltage is obtained, and the relative importance of those parameters is given.展开更多
This paper details the design and simulation of a novel low-loss four-bit reconfigurable bandpass filter that integrates microelectromechanical system(MEMS)switches and comb resonators.A T-shaped reconfigurable resona...This paper details the design and simulation of a novel low-loss four-bit reconfigurable bandpass filter that integrates microelectromechanical system(MEMS)switches and comb resonators.A T-shaped reconfigurable resonator is reconfigured in a'one resonator,multiple MEMS switches'configuration and used to gate the load capacitances of comb resonators so that a multiple-frequency filtering function is realized within the 7-16 GHz frequency range.In addition,the insertion loss of the filter is less than 1.99 dB,the out-of-band rejection is more than 18.30 dB,and the group delay is less than 0.25 ns.On the other hand,the size of this novel filter is only 4.4 mm×2.5 mm×0.4 mm.Our results indicate that this MEMS reconfigurable filter,which can switch 16 central frequency bands through eight switches,achieves a low insertion loss compared to those of traditional MEMS filters.In addition,the advantages of small size are obtained while achieving high integration.展开更多
An approximate analytical model for calculating the pull-in voltage of a stepped cantilever-type radio frequency (RF) micro electro-mechanical system (MEMS) switch is developed based on the Euler-Bernoulli beam an...An approximate analytical model for calculating the pull-in voltage of a stepped cantilever-type radio frequency (RF) micro electro-mechanical system (MEMS) switch is developed based on the Euler-Bernoulli beam and a modified couple stress theory, and is validated by comparison with the finite element results. The sensitivity functions of the pull-in voltage to the designed parameters are derived based on the proposed model. The sensitivity investigation shows that the pull-in voltage sensitivities increase/decrease nonlinearly with the increases in the designed parameters. For the stepped cantilever beam, there exists a nonzero optimal dimensionless length ratio, where the pull-in voltage is insensitive. The optimal value of the dimensionless length ratio only depends on the dimensionless width ratio, and can be obtained by solving a nonlinear equation. The determination of the designed parameters is discussed, and some recommendations are made for the RF MEMS switch optimization.展开更多
基金The project supported by the National Natural Science Foundation of China,the Chinese Academy of Sciences,the RGC/NSFC Joint Research Scheme (N-HKUST 601/01)the Joint Laboratory of Microsystems
文摘An improved electromechanical model of the RF MEMS(radio frequency microelec- tromechanical systems)switches is introduced,in which the effects of intrinsic residual stress from fabrication processes,axial stress due to stretching of beam,and fringing field are taken into account. Four dimensionless numbers are derived from the governing equation of the developed model.A semi- analytical method is developed to calculate the behavior of the RF MEMS switches.Subsequently the influence of the material and geometry parameters on the behavior of the structure is analyzed and compared,and the corresponding analysis with the dimensionless numbers is conducted too.The quantitative relationship between the presented parameters and the critical pull-in voltage is obtained, and the relative importance of those parameters is given.
基金Project supported by the National Defense Technology Industry Strong Foundation Project of China (Grant No. JCKY2018* * **06)the Information System New items Project (Grant Nos. 2018****26 and 2019****10)the Key Laboratory of Instrumentation Science and Dynamic Measurement for their support
文摘This paper details the design and simulation of a novel low-loss four-bit reconfigurable bandpass filter that integrates microelectromechanical system(MEMS)switches and comb resonators.A T-shaped reconfigurable resonator is reconfigured in a'one resonator,multiple MEMS switches'configuration and used to gate the load capacitances of comb resonators so that a multiple-frequency filtering function is realized within the 7-16 GHz frequency range.In addition,the insertion loss of the filter is less than 1.99 dB,the out-of-band rejection is more than 18.30 dB,and the group delay is less than 0.25 ns.On the other hand,the size of this novel filter is only 4.4 mm×2.5 mm×0.4 mm.Our results indicate that this MEMS reconfigurable filter,which can switch 16 central frequency bands through eight switches,achieves a low insertion loss compared to those of traditional MEMS filters.In addition,the advantages of small size are obtained while achieving high integration.
基金supported by the National Natural Science Foundation of China(Nos.51505089 and61204116)the Opening Project of the Science and Technology on Reliability Physics and Application Technology of Electronic Component Laboratory(Nos.ZHD201207 and 9140C030605140C03015)the Pearl River S&T Nova Program of Guangzhou(No.2014J2200086)
文摘An approximate analytical model for calculating the pull-in voltage of a stepped cantilever-type radio frequency (RF) micro electro-mechanical system (MEMS) switch is developed based on the Euler-Bernoulli beam and a modified couple stress theory, and is validated by comparison with the finite element results. The sensitivity functions of the pull-in voltage to the designed parameters are derived based on the proposed model. The sensitivity investigation shows that the pull-in voltage sensitivities increase/decrease nonlinearly with the increases in the designed parameters. For the stepped cantilever beam, there exists a nonzero optimal dimensionless length ratio, where the pull-in voltage is insensitive. The optimal value of the dimensionless length ratio only depends on the dimensionless width ratio, and can be obtained by solving a nonlinear equation. The determination of the designed parameters is discussed, and some recommendations are made for the RF MEMS switch optimization.