A network analyzer can often comprehend many protocols, which enables it to display talks taking place between hosts over a network. A network analyzer analyzes the device or network response and measures for the oper...A network analyzer can often comprehend many protocols, which enables it to display talks taking place between hosts over a network. A network analyzer analyzes the device or network response and measures for the operator to keep an eye on the network’s or object’s performance in an RF circuit. The purpose of the following research includes analyzing the capabilities of NetFlow analyzer to measure various parts, including filters, mixers, frequency sensitive networks, transistors, and other RF-based instruments. NetFlow Analyzer is a network traffic analyzer that measures the network parameters of electrical networks. Although there are other types of network parameter sets including Y, Z, & H-parameters, these instruments are typically employed to measure S-parameters since transmission & reflection of electrical networks are simple to calculate at high frequencies. These analyzers are widely employed to distinguish between two-port networks, including filters and amplifiers. By allowing the user to view the actual data that is sent over a network, packet by packet, a network analyzer informs you of what is happening there. Also, this research will contain the design model of NetFlow Analyzer that Measurements involving transmission and reflection use. Gain, insertion loss, and transmission coefficient are measured in transmission measurements, whereas return loss, reflection coefficient, impedance, and other variables are measured in reflection measurements. These analyzers’ operational frequencies vary from 1 Hz to 1.5 THz. These analyzers can also be used to examine stability in measurements of open loops, audio components, and ultrasonics.展开更多
The implementation and characteristics of a compact lumped-element three-order low pass filter are presented in this paper. The filter with 120 MHz cut off frequency, as well as more than 20 dB of the attenuation abov...The implementation and characteristics of a compact lumped-element three-order low pass filter are presented in this paper. The filter with 120 MHz cut off frequency, as well as more than 20 dB of the attenuation above 360 MHz frequency band is successfully manufactured in an LTCC substrate with 40 pm layer thickness. The overall size of the filter is 2.0 mm×1.2 mm×0.9 mm. A good coincidence between the measured results and the full-wave electromagnetic designed responses is observed.展开更多
A 1.9GHz down-conversion CMOS mixer with a novel folded Gilbert cell,intended for use in GSM1900 （PCS1900） low-IF receivers,is fabricated in a RF 0.18μm CMOS process. The prototype demonstrates good performance at ...A 1.9GHz down-conversion CMOS mixer with a novel folded Gilbert cell,intended for use in GSM1900 （PCS1900） low-IF receivers,is fabricated in a RF 0.18μm CMOS process. The prototype demonstrates good performance at an intermediate frequency of 100kHz. It achieves a conversion gain of 6dB, SSB noise figure of 18. 5dB （1MHz IF） ,and IIP3 11.5dBm while consuming a 7mA current from a 3.3V power supply.展开更多
For the non-stop demands for a better and smarter society, the number of electronic devices keeps increasing exponentially;and the computation power, communication data rate, smart sensing capability and intelligence ...For the non-stop demands for a better and smarter society, the number of electronic devices keeps increasing exponentially;and the computation power, communication data rate, smart sensing capability and intelligence are always not enough. Hardware supports software, while the integrated circuit(IC) is the core of hardware. In this long review paper, we summarize and discuss recent trending IC design directions and challenges, and try to give the readers big/cool pictures on each selected small/hot topics. We divide the trends into the following six categories, namely, 1) machine learning and artificial intelligence(AI) chips, 2) communication ICs, 3) data converters, 4) power converters, 5) imagers and range sensors, 6) emerging directions. Hope you find this paper useful for your future research and works.展开更多
In the process of production, transportation and assembly, cable assemblies can get a lot of electrostatic charge by friction, dragging, pulling and induction. These residual charges can be discharged when Electrostat...In the process of production, transportation and assembly, cable assemblies can get a lot of electrostatic charge by friction, dragging, pulling and induction. These residual charges can be discharged when Electrostatic sensitive device connected with it and can cause the complete failure or potential failure of the electrostatic sensitive product. In this paper, the theoretical model of cable assemblies is established by analyzing the characteristics of cable assemblies, and the equivalent RF circuit is designed. The static discharge characteristics of the cable are analyzed and verified by simulation.展开更多
In view of fuzzy and unstable images received in video capsule endoscopy, and the poor communication effect, an improved radio frequency(RF) transmission circuit module with low power consumption and helix antenna is ...In view of fuzzy and unstable images received in video capsule endoscopy, and the poor communication effect, an improved radio frequency(RF) transmission circuit module with low power consumption and helix antenna is designed to improve the performance of video transmission and to extend the working time of the capsule. Simulation and analysis of the circuits and antenna with HFSS12 and ADS2011 software are highlighted.Video capsule endoscope prototypes are made and evaluated to verify the feasibility of the proposed design. In vitro tests and animal experiments show that the results of the antenna tests basically meet the simulation, and the power consumption of RF circuit is 15.9 mV. The video capsule endoscope works well with the receiver with multiple receiving antennas, and the working time is more than 9 h. It can realize the wireless transmission of the video data, and images received are clear and stable in comparison with the previous designs.展开更多
文摘A network analyzer can often comprehend many protocols, which enables it to display talks taking place between hosts over a network. A network analyzer analyzes the device or network response and measures for the operator to keep an eye on the network’s or object’s performance in an RF circuit. The purpose of the following research includes analyzing the capabilities of NetFlow analyzer to measure various parts, including filters, mixers, frequency sensitive networks, transistors, and other RF-based instruments. NetFlow Analyzer is a network traffic analyzer that measures the network parameters of electrical networks. Although there are other types of network parameter sets including Y, Z, & H-parameters, these instruments are typically employed to measure S-parameters since transmission & reflection of electrical networks are simple to calculate at high frequencies. These analyzers are widely employed to distinguish between two-port networks, including filters and amplifiers. By allowing the user to view the actual data that is sent over a network, packet by packet, a network analyzer informs you of what is happening there. Also, this research will contain the design model of NetFlow Analyzer that Measurements involving transmission and reflection use. Gain, insertion loss, and transmission coefficient are measured in transmission measurements, whereas return loss, reflection coefficient, impedance, and other variables are measured in reflection measurements. These analyzers’ operational frequencies vary from 1 Hz to 1.5 THz. These analyzers can also be used to examine stability in measurements of open loops, audio components, and ultrasonics.
基金This work was supported by the National Nature Science Foundation of China under Grant No. 60425102.
文摘The implementation and characteristics of a compact lumped-element three-order low pass filter are presented in this paper. The filter with 120 MHz cut off frequency, as well as more than 20 dB of the attenuation above 360 MHz frequency band is successfully manufactured in an LTCC substrate with 40 pm layer thickness. The overall size of the filter is 2.0 mm×1.2 mm×0.9 mm. A good coincidence between the measured results and the full-wave electromagnetic designed responses is observed.
文摘A 1.9GHz down-conversion CMOS mixer with a novel folded Gilbert cell,intended for use in GSM1900 （PCS1900） low-IF receivers,is fabricated in a RF 0.18μm CMOS process. The prototype demonstrates good performance at an intermediate frequency of 100kHz. It achieves a conversion gain of 6dB, SSB noise figure of 18. 5dB （1MHz IF） ,and IIP3 11.5dBm while consuming a 7mA current from a 3.3V power supply.
文摘For the non-stop demands for a better and smarter society, the number of electronic devices keeps increasing exponentially;and the computation power, communication data rate, smart sensing capability and intelligence are always not enough. Hardware supports software, while the integrated circuit(IC) is the core of hardware. In this long review paper, we summarize and discuss recent trending IC design directions and challenges, and try to give the readers big/cool pictures on each selected small/hot topics. We divide the trends into the following six categories, namely, 1) machine learning and artificial intelligence(AI) chips, 2) communication ICs, 3) data converters, 4) power converters, 5) imagers and range sensors, 6) emerging directions. Hope you find this paper useful for your future research and works.
文摘In the process of production, transportation and assembly, cable assemblies can get a lot of electrostatic charge by friction, dragging, pulling and induction. These residual charges can be discharged when Electrostatic sensitive device connected with it and can cause the complete failure or potential failure of the electrostatic sensitive product. In this paper, the theoretical model of cable assemblies is established by analyzing the characteristics of cable assemblies, and the equivalent RF circuit is designed. The static discharge characteristics of the cable are analyzed and verified by simulation.
基金the National Natural Science Foundation of China(No.31170968)the Shanghai Science Committee Foundation(No.09DZ1907400)
文摘In view of fuzzy and unstable images received in video capsule endoscopy, and the poor communication effect, an improved radio frequency(RF) transmission circuit module with low power consumption and helix antenna is designed to improve the performance of video transmission and to extend the working time of the capsule. Simulation and analysis of the circuits and antenna with HFSS12 and ADS2011 software are highlighted.Video capsule endoscope prototypes are made and evaluated to verify the feasibility of the proposed design. In vitro tests and animal experiments show that the results of the antenna tests basically meet the simulation, and the power consumption of RF circuit is 15.9 mV. The video capsule endoscope works well with the receiver with multiple receiving antennas, and the working time is more than 9 h. It can realize the wireless transmission of the video data, and images received are clear and stable in comparison with the previous designs.
