RF circuit board has a significant impact on performance of the Digital Beam Position Monitor (DBPM) in storage ring of a synchrotron radiation facility.In this paper,a front-end RF board is designed for DBPM,and sche...RF circuit board has a significant impact on performance of the Digital Beam Position Monitor (DBPM) in storage ring of a synchrotron radiation facility.In this paper,a front-end RF board is designed for DBPM,and schematics of the RF board and the test results are given.In view of the inevitable inconsistency in the multi-channel circuit,a calibration circuit is designed to reduce such an influence.The test results show that the calibration method is useful for beam current dependence which is sensitive to channels inconsistency.展开更多
The China initiative Accelerator Driven System,CiADS,physics design adopts 162.5 MHz,325 MHz,and 650 MHz cavities,which are driven by the corresponding radio frequency(RF)power system,requiring frequency translation f...The China initiative Accelerator Driven System,CiADS,physics design adopts 162.5 MHz,325 MHz,and 650 MHz cavities,which are driven by the corresponding radio frequency(RF)power system,requiring frequency translation front-end for the RF station.For that application,a general-purpose design front-end prototype has been developed to evaluate the multi-frequency point supported design feasibility.The difficult parts to achieve the requirements of the general-purpose design are reasonable device selection and balanced design.With a carefully selected low-noise wide-band RF mixer and amplifier to balance the performance of multi-frequency supported down-conversion,specially designed LO distribution net to increase isolation between adjacent channels,and external band-pass filter to realize expected up-conversion frequencies,high maintenance and modular front-end generalpurpose design has been implemented.Results of standard parameters show an R2 value of at least 99.991%in the range of-60-10 dBm for linearity,up to 18 dBm for P1dB,and up to 89 dBc for cross talk between adjacent channels.The phase noise spectrum is lower than 80 dBc in the range of 0-1 MHz;cumulative phase noise is 0.006°;and amplitude and phase stability are 0.022%and 0.034°,respectively.展开更多
An adjustable mixer for surface acoustic wave( SAW)-less radio frequency( RF) front-end is presented in this paper. Through changing the bias voltage,the presented mixer with reconfigurable voltage conversion gain( VC...An adjustable mixer for surface acoustic wave( SAW)-less radio frequency( RF) front-end is presented in this paper. Through changing the bias voltage,the presented mixer with reconfigurable voltage conversion gain( VCG) is suitable for multi-mode multi-standard( MMMS) applications. An equivalent local oscillator( LO) frequency-tunable high-Q band-pass filter( BPF) at low noise amplifier( LNA) output is used to reject the out-of-band interference signals. Base-band( BB) capacitor of the mixer is variable to obtain 15 kinds of intermediate frequency( IF) bandwidth( BW). The proposed passive mixer with LNA is implemented in TSMC 0. 18μm RF CMOS process and operates from 0. 5 to 2. 5 GHz with measured maximum out-of-band rejection larger than 40 d B. The measured VCG of the front-end can be changed from 5 to 17 d B; the maximum input intercept point( IIP3) is0 d Bm and the minimum noise figure( NF) is 3. 7 d B. The chip occupies an area of 0. 44 mm^2 including pads.展开更多
该文首次报道了一种极简构架的5G毫米波反向阵设计原理及其CMOS芯片实现技术。该毫米波反向阵极简构架,利用次谐波混频器提供相位共轭和阵列反向功能,无需移相电路及波束控制系统,便可实现波束自动回溯移动通信功能。该文采用国产0.18μ...该文首次报道了一种极简构架的5G毫米波反向阵设计原理及其CMOS芯片实现技术。该毫米波反向阵极简构架,利用次谐波混频器提供相位共轭和阵列反向功能,无需移相电路及波束控制系统,便可实现波束自动回溯移动通信功能。该文采用国产0.18μm CMOS工艺研制了5G毫米波反向阵芯片,包括发射前端、接收前端及跟踪锁相环等核心模块,其中发射及接收前端芯片采用次谐波混频及跨导增强等技术,分别实现了19.5 d B和18.7 d B的实测转换增益。所实现的跟踪锁相环芯片具备双模工作优势,可根据不同参考信号支持幅度调制及相位调制,实测输出信号相噪优于–125 dBc/Hz@100 kHz。该文给出的测试结果验证了所提5G毫米波反向阵通信架构及其CMOS芯片实现的可行性,从而为5G/6G毫米波通信探索了一种架构极简、成本极低、拓展性强的新方案。展开更多
为了提高超高频RFID系统中阅读器在低信噪比的情况下仍具有较高的识别能力,提出一种基于FPGA系统结合软件无线电方法实现超高频RFID射频前端电路方案。超高频射频识别系统必须符合EPC Class 1generation 2标准,所设计的电路系统以Xilin...为了提高超高频RFID系统中阅读器在低信噪比的情况下仍具有较高的识别能力,提出一种基于FPGA系统结合软件无线电方法实现超高频RFID射频前端电路方案。超高频射频识别系统必须符合EPC Class 1generation 2标准,所设计的电路系统以Xilinx公司的XC6SLX16-2CSG324FPGA芯片为硬件基础,将数字基带调制解调和中频滤波电路在FPGA系统中设计实现,重点阐述了射频前端电路的设计结构、AD/DA转换电路,以及数字滤波器的设计。实验结果表明,所设计的超高频RFID阅读器简化了前端电路系统结构,提升了稳定性,增强了抗干扰能力。该电路系统在信噪比较低的情况下,能够较好地实现915MHz频率的射频接收和发送。展开更多
基金Supported by 100 Talents Program of The Chinese Academy of Sciences
文摘RF circuit board has a significant impact on performance of the Digital Beam Position Monitor (DBPM) in storage ring of a synchrotron radiation facility.In this paper,a front-end RF board is designed for DBPM,and schematics of the RF board and the test results are given.In view of the inevitable inconsistency in the multi-channel circuit,a calibration circuit is designed to reduce such an influence.The test results show that the calibration method is useful for beam current dependence which is sensitive to channels inconsistency.
文摘The China initiative Accelerator Driven System,CiADS,physics design adopts 162.5 MHz,325 MHz,and 650 MHz cavities,which are driven by the corresponding radio frequency(RF)power system,requiring frequency translation front-end for the RF station.For that application,a general-purpose design front-end prototype has been developed to evaluate the multi-frequency point supported design feasibility.The difficult parts to achieve the requirements of the general-purpose design are reasonable device selection and balanced design.With a carefully selected low-noise wide-band RF mixer and amplifier to balance the performance of multi-frequency supported down-conversion,specially designed LO distribution net to increase isolation between adjacent channels,and external band-pass filter to realize expected up-conversion frequencies,high maintenance and modular front-end generalpurpose design has been implemented.Results of standard parameters show an R2 value of at least 99.991%in the range of-60-10 dBm for linearity,up to 18 dBm for P1dB,and up to 89 dBc for cross talk between adjacent channels.The phase noise spectrum is lower than 80 dBc in the range of 0-1 MHz;cumulative phase noise is 0.006°;and amplitude and phase stability are 0.022%and 0.034°,respectively.
基金Supported by the National Basic Research Program of China(No.2010CB327404)the Priority Academic Program Development of Jiangsu Higher Education Institutions
文摘An adjustable mixer for surface acoustic wave( SAW)-less radio frequency( RF) front-end is presented in this paper. Through changing the bias voltage,the presented mixer with reconfigurable voltage conversion gain( VCG) is suitable for multi-mode multi-standard( MMMS) applications. An equivalent local oscillator( LO) frequency-tunable high-Q band-pass filter( BPF) at low noise amplifier( LNA) output is used to reject the out-of-band interference signals. Base-band( BB) capacitor of the mixer is variable to obtain 15 kinds of intermediate frequency( IF) bandwidth( BW). The proposed passive mixer with LNA is implemented in TSMC 0. 18μm RF CMOS process and operates from 0. 5 to 2. 5 GHz with measured maximum out-of-band rejection larger than 40 d B. The measured VCG of the front-end can be changed from 5 to 17 d B; the maximum input intercept point( IIP3) is0 d Bm and the minimum noise figure( NF) is 3. 7 d B. The chip occupies an area of 0. 44 mm^2 including pads.
文摘该文首次报道了一种极简构架的5G毫米波反向阵设计原理及其CMOS芯片实现技术。该毫米波反向阵极简构架,利用次谐波混频器提供相位共轭和阵列反向功能,无需移相电路及波束控制系统,便可实现波束自动回溯移动通信功能。该文采用国产0.18μm CMOS工艺研制了5G毫米波反向阵芯片,包括发射前端、接收前端及跟踪锁相环等核心模块,其中发射及接收前端芯片采用次谐波混频及跨导增强等技术,分别实现了19.5 d B和18.7 d B的实测转换增益。所实现的跟踪锁相环芯片具备双模工作优势,可根据不同参考信号支持幅度调制及相位调制,实测输出信号相噪优于–125 dBc/Hz@100 kHz。该文给出的测试结果验证了所提5G毫米波反向阵通信架构及其CMOS芯片实现的可行性,从而为5G/6G毫米波通信探索了一种架构极简、成本极低、拓展性强的新方案。
文摘为了提高超高频RFID系统中阅读器在低信噪比的情况下仍具有较高的识别能力,提出一种基于FPGA系统结合软件无线电方法实现超高频RFID射频前端电路方案。超高频射频识别系统必须符合EPC Class 1generation 2标准,所设计的电路系统以Xilinx公司的XC6SLX16-2CSG324FPGA芯片为硬件基础,将数字基带调制解调和中频滤波电路在FPGA系统中设计实现,重点阐述了射频前端电路的设计结构、AD/DA转换电路,以及数字滤波器的设计。实验结果表明,所设计的超高频RFID阅读器简化了前端电路系统结构,提升了稳定性,增强了抗干扰能力。该电路系统在信噪比较低的情况下,能够较好地实现915MHz频率的射频接收和发送。
