Nano-ring-type magnetic tunnel junctions （NR-MTJs） with the layer structure of Ta（5）/Ir22Mn78（10）/ Co75Fe25（2）/Ru（0.75）/CoooFe20B20（3）/Al（0.6）-oxide/Co60Fe20B20（2.5）/Ta（3）/Ru（5） （thickness unit：...Nano-ring-type magnetic tunnel junctions （NR-MTJs） with the layer structure of Ta（5）/Ir22Mn78（10）/ Co75Fe25（2）/Ru（0.75）/CoooFe20B20（3）/Al（0.6）-oxide/Co60Fe20B20（2.5）/Ta（3）/Ru（5） （thickness unit： nm） were nano-fabricated on the Si（100）/SiO2 substrate using magnetron sputtering deposition combined with the optical lithography, electron beam lithography （EBL） and Ar ion-beam etching techniques. The smaller NR-MTJs with the inner- and outer-diameter of around 50 and 100 nm and also their corresponding NR-MTJ arrays were nano-patterned. The tunnelling magnetoresistance （TMR ＆ R） versus driving current （I） loops for a spin-polarized current switching were measured, and the TMR ratio of around 35% at room temperature were observed. The critical values of switching current for the free Co60Fe20B20 layer relative to the reference Co6oFe2oB2o layer between parallel and anti-parallel magnetization states were between 0.50 and 0.75 mA in such NR-MTJs. It is suggested that the applicable MRAM fabrication with the density and capacity higher than 256 Mbit/inch2 even 6 Gbite/inch2 are possible using both I NR-MTJ＋1 transistor structure and current switching mechanism based on based on our fabricated 4×4 MRAM demo devices.展开更多
Pipeline plays a vital role in transporting fluids like oils, water, and petrochemical substances for longer distances. Based on the materials they carry</span><span style="white-space:normal;font-size:1...Pipeline plays a vital role in transporting fluids like oils, water, and petrochemical substances for longer distances. Based on the materials they carry</span><span style="white-space:normal;font-size:10pt;font-family:"">,</span><span style="white-space:normal;font-size:10pt;font-family:""> prolonged usage may cause the initiation of defects in the pipeline. These defects occur due to the formed salt deposits, chemical reaction happens between the inner surface and the transferring substance, prevailing environmental conditions, etc. These defects, if not identified earlier may lead to significant losses to the industry. In this work, an in-line inspection system utilizes the nondestructive way for analyzing the internal defects in the petrochemical pipeline. This system consists of a pipeline inspection robot having two major units namely the visual inspection unit and the power carrier unit. The visual inspection unit makes use of a ring-type laser diode and the camera. The laser diode serves as a light source for capturing good quality images of inspection. This unit is controlled by the Arduino in the power carrier unit which provides the necessary movement throughout the pipe. The inspected images captured by the camera are further processed with the aid of NI vision assistant software. After applying the processing function parameters provided by this software, the defect location can be clearly visualized with high precision. Three sets of defects are introduced in a Polylactide (PLA) pipe based on its position and angle along the circumference of the pipe. Further, this robot system serves as a real-time interactive image synchronization system for acquiring the inspected images. By comparing the actual and calculated defect size, the error percentage obtained was less than 5%.展开更多
The ubiquitin-proteasome proteolysis pathway is responsible for the degradation of abnormal and short-lived proteins to regulate many important biochemical activities in eukaryotes. By employing affymetrix microarray ...The ubiquitin-proteasome proteolysis pathway is responsible for the degradation of abnormal and short-lived proteins to regulate many important biochemical activities in eukaryotes. By employing affymetrix microarray analysis, we have identified a novel ubiquitin ligase E3 gene GhRING2 that is differentially expressed between two Gossypium hirsutum lines-Texas Marker-1 (TM-1) and Chromosome Substitution Line CS-B25. The CS-B25 line has chromosome 25 from G. barbadense substituted into TM-1. The complete nucleotide sequences of GhRING2 along with its 5’-flanking region were obtained by genomic walking. GhRING2 was highly expressed in elongating fiber, and GUS expression directed by the GhRING2 promoter was found in hypocotyls and young stems of transgenic Arabidopsis plants. Using a yeast two-hybrid assay GhRING2 was found to interact with a PROTODERMAL FACTOR1 (GhPDF1) protein. GhPDF1 was expressed preferentially in immature ovules and fiber initials, and the GhPDF1 gene had been suggested to play a role in cell fate determination and fiber development. Pull down and plasmid swap assays further confirmed the interaction between GhRING2 and GhPDF1. The expression and protein interaction data indicate that GhRING2 may be involved in the turnover of GhPDF1 and participation in the transition from initiation to elongation stages during fiber development. Our data strongly suggest that the ubiquitin-proteasome pathway may regulate cotton fiber growth and development. The nucleotide sequence data of GhRING2 in this article have been submitted to the Gen Bank Nucleotide Sequence Data Bases under the accession number BankIt 1,742,008 SeqKM 108,000.展开更多
基金the State Key Project of Fundamental Research of Ministry of Science and Technology （No. 2006CB932200） the National Natural Science Foundation of China （NSFC, No. 10574156）+2 种基金 the Knowledge Innovation Program of Chinese Aca.demy of Sciencesthe protial support of 0utstanding Young Researcher Foundation （Nos. 50325104 and 50528101） K.C.Wong Education Foundation, Hong Kong.
文摘Nano-ring-type magnetic tunnel junctions （NR-MTJs） with the layer structure of Ta（5）/Ir22Mn78（10）/ Co75Fe25（2）/Ru（0.75）/CoooFe20B20（3）/Al（0.6）-oxide/Co60Fe20B20（2.5）/Ta（3）/Ru（5） （thickness unit： nm） were nano-fabricated on the Si（100）/SiO2 substrate using magnetron sputtering deposition combined with the optical lithography, electron beam lithography （EBL） and Ar ion-beam etching techniques. The smaller NR-MTJs with the inner- and outer-diameter of around 50 and 100 nm and also their corresponding NR-MTJ arrays were nano-patterned. The tunnelling magnetoresistance （TMR ＆ R） versus driving current （I） loops for a spin-polarized current switching were measured, and the TMR ratio of around 35% at room temperature were observed. The critical values of switching current for the free Co60Fe20B20 layer relative to the reference Co6oFe2oB2o layer between parallel and anti-parallel magnetization states were between 0.50 and 0.75 mA in such NR-MTJs. It is suggested that the applicable MRAM fabrication with the density and capacity higher than 256 Mbit/inch2 even 6 Gbite/inch2 are possible using both I NR-MTJ＋1 transistor structure and current switching mechanism based on based on our fabricated 4×4 MRAM demo devices.
文摘Pipeline plays a vital role in transporting fluids like oils, water, and petrochemical substances for longer distances. Based on the materials they carry</span><span style="white-space:normal;font-size:10pt;font-family:"">,</span><span style="white-space:normal;font-size:10pt;font-family:""> prolonged usage may cause the initiation of defects in the pipeline. These defects occur due to the formed salt deposits, chemical reaction happens between the inner surface and the transferring substance, prevailing environmental conditions, etc. These defects, if not identified earlier may lead to significant losses to the industry. In this work, an in-line inspection system utilizes the nondestructive way for analyzing the internal defects in the petrochemical pipeline. This system consists of a pipeline inspection robot having two major units namely the visual inspection unit and the power carrier unit. The visual inspection unit makes use of a ring-type laser diode and the camera. The laser diode serves as a light source for capturing good quality images of inspection. This unit is controlled by the Arduino in the power carrier unit which provides the necessary movement throughout the pipe. The inspected images captured by the camera are further processed with the aid of NI vision assistant software. After applying the processing function parameters provided by this software, the defect location can be clearly visualized with high precision. Three sets of defects are introduced in a Polylactide (PLA) pipe based on its position and angle along the circumference of the pipe. Further, this robot system serves as a real-time interactive image synchronization system for acquiring the inspected images. By comparing the actual and calculated defect size, the error percentage obtained was less than 5%.
文摘The ubiquitin-proteasome proteolysis pathway is responsible for the degradation of abnormal and short-lived proteins to regulate many important biochemical activities in eukaryotes. By employing affymetrix microarray analysis, we have identified a novel ubiquitin ligase E3 gene GhRING2 that is differentially expressed between two Gossypium hirsutum lines-Texas Marker-1 (TM-1) and Chromosome Substitution Line CS-B25. The CS-B25 line has chromosome 25 from G. barbadense substituted into TM-1. The complete nucleotide sequences of GhRING2 along with its 5’-flanking region were obtained by genomic walking. GhRING2 was highly expressed in elongating fiber, and GUS expression directed by the GhRING2 promoter was found in hypocotyls and young stems of transgenic Arabidopsis plants. Using a yeast two-hybrid assay GhRING2 was found to interact with a PROTODERMAL FACTOR1 (GhPDF1) protein. GhPDF1 was expressed preferentially in immature ovules and fiber initials, and the GhPDF1 gene had been suggested to play a role in cell fate determination and fiber development. Pull down and plasmid swap assays further confirmed the interaction between GhRING2 and GhPDF1. The expression and protein interaction data indicate that GhRING2 may be involved in the turnover of GhPDF1 and participation in the transition from initiation to elongation stages during fiber development. Our data strongly suggest that the ubiquitin-proteasome pathway may regulate cotton fiber growth and development. The nucleotide sequence data of GhRING2 in this article have been submitted to the Gen Bank Nucleotide Sequence Data Bases under the accession number BankIt 1,742,008 SeqKM 108,000.
基金supported by the National Natural Foundation of China(No.21827804,No.22103075,No.22173089)the National Key R&D Program of China(No.2021YFA0716801,No.2017YFA0303502)。
