The existing active queue management （AQM） algorithm acts on subscribers and edge routers only, it does not support differentiate-serve （Diffserv） quality of service （QoS）, while the existing diffserv QoS has no...The existing active queue management （AQM） algorithm acts on subscribers and edge routers only, it does not support differentiate-serve （Diffserv） quality of service （QoS）, while the existing diffserv QoS has not considered the link capacities between edge routers and connected core routers. When a core router in a two layers’ network experiences congestion, the connected edge routers have no ability to adjust their access data rates. Thus, it is difficult to achieve the congestion control for the large scale network with many edge routers and core routers. To solve these problems, two difffserve AQM algorithms are proposed for the congestion control of multilayer network. One diffserv AQM algorithm implements fair link capacities of edge routers, and the other one implements unequal link capacities of edge routers, but it requires the core routers to have multi-queues buffers and Diffserv AQM to support. The proposed algorithms achieve the network congestion control by operating AQM parameters on the conditions of proposed three theorems for core and edge routers. The dynamic simulation results demonstrate the proposed control algorithms for core and edge routers to be valid.展开更多
Compared with the traditional and inter-chip networks, on-chip networks （NoCs） have enormous wire resources which can be traded for improving other performance requirements. This means that much wider data links can...Compared with the traditional and inter-chip networks, on-chip networks （NoCs） have enormous wire resources which can be traded for improving other performance requirements. This means that much wider data links can be used for NoCs. This paper focuses on the area costs for on-chip routers under four different data-link widths： 8 bits, 16 bits, 128 bits, and 256bits. Firstly, a virtual-channel based on-chip router is introduced. Secondly, the components of the router are implemented by Verilog HDL models and synthesized by Quartus II 4.0 in a FPGA device. Finally, the area costs are analyzed. It can be seen from the results that data-link width has great influence on area costs of buffers and crossbar while has no influence on area costs of arbiter.展开更多
A Prioritized Medium Access Control （P-MAC） protocol is proposed for wireless routers of mesh networks with quality-of-service provisioning. The simple yet effective design of P-MAC offers strict service differentia...A Prioritized Medium Access Control （P-MAC） protocol is proposed for wireless routers of mesh networks with quality-of-service provisioning. The simple yet effective design of P-MAC offers strict service differentiation for prioritized packets. A Markov model is developed to yield important performance matrices including the packet blocking probability due to queue overflow and the packet reneging probability due to delay bound. It is further proved that the service time of P-MAC approximates exponential distribution, and can be effectively estimated. The analytic models with preemptive and non-preemptive schemes, validated via simulations, show that P-MAC can effectively support traffic differentiation and achieve very low packet dropping （both reneging and blocking） probabilities when the traffic load is below the channel capacity. When the network is overloaded, P-MAC can still maintain extremely stable and high channel throughput. Moreover, it is demonstrated that P-MAC performs superior in multihop networks, further proving the advantages of the proposed protocol.展开更多
The exponential growth of user traffic has been driving routers to run at higher capacity. In a traditional router, the centralized switching fabric is becoming the bottleneck for its limited number of ports and compl...The exponential growth of user traffic has been driving routers to run at higher capacity. In a traditional router, the centralized switching fabric is becoming the bottleneck for its limited number of ports and complicated scheduling algorithms. Direct networks, such as 3-D Torus topology, have been successfully applied to the design of scalable routers. They show good scalability and fault tolerance. Unfortunately, its scalability is limited in practice. In this paper, we introduce another type of direct network, called H-Torus. This network shows excellent topological properties. On its basis, the designs of line card and routing algorithms are introduced. Extensive simulations show that the routing algorithm is very important in such a system and results in low latency with high throughput.展开更多
Railway power system is an inseparable part of the power system,therefore,the intelligent architecture of the railway power system should also be focused on.The unique power supply characteristics of the railway power...Railway power system is an inseparable part of the power system,therefore,the intelligent architecture of the railway power system should also be focused on.The unique power supply characteristics of the railway power system are analyzed and integrated railway smart grid architecture based on energy routers is proposed.Importantly,three corresponding resilient mode control methods are suggested for the proposed architecture.In the fourth section,a simulation model corresponding to the resilient control mode is built and the simulation results prove the feasibility of the proposed control mode.Equally,for the novel network-connected backbone router(NCBR),a 1000 kVA,27.5/10 kV NCBR engineering prototype is used to prove its effectiveness in practical applications.Finally,a differentiation analysis is given,followed by conclusions regarding the traditional power system and proposed system.展开更多
The dynamic control of single-photon scattering in a pair of one-dimensional waveguides mediated by a time-modulated atom-cavity system is investigated.Two cases,where the waveguides are coupled symmetrically or asymm...The dynamic control of single-photon scattering in a pair of one-dimensional waveguides mediated by a time-modulated atom-cavity system is investigated.Two cases,where the waveguides are coupled symmetrically or asymmetrically to the atom-cavity system,are discussed in detail.The results show that such time-modulated atom-cavity configuration can behave as a dynamical tunable directional single-photon router.The photons with different frequencies can dynamically be routed from the incident waveguide into any ports of the other with a 100%probability via adjusting the modulated amplitude or phases of the time-modulated atom-cavity coupling strengths,associate with the help of the asymmetrical waveguide-cavity couplings.Furthermore,the influence of dissipation on the routing capability is investigated.It is shown that the present single-photon router is robust against the dissipative process of the system,especially the atomic dissipation.These results are expected to be applicable in quantum information processing and design quantum devices with dynamical modulation.展开更多
Network Functions Virtualization(NFV) is an attempt to help operators more effectively manage their networks by implementing traditional network functions embedded in specialized hardware platforms in term of virtuali...Network Functions Virtualization(NFV) is an attempt to help operators more effectively manage their networks by implementing traditional network functions embedded in specialized hardware platforms in term of virtualized software instances. But, existing novel network appliances designed for NFV infrastructure are always architected on a general-purpose x86 server, which makes the performance of network functions limited by the hosted single server. To address this challenge, we propose ApplianceB ricks, a novel NFV-enable network appliance architecture that is used to explore the way of consolidating multiple physical network functions into a clustered network appliance, which is able to improve the processing capability of NFV-enabled network appliances.展开更多
A high proportion of renewable energy affects the power quality of distribution networks,and surplus energy will be sold to the upstream grid at a low price.In this paper,considering peer-to-peer energy transactions,t...A high proportion of renewable energy affects the power quality of distribution networks,and surplus energy will be sold to the upstream grid at a low price.In this paper,considering peer-to-peer energy transactions,the energy router-based multiple distribution networks are analyzed to solve the above problems and realize collaborative consumption of renewable energy.Presently,the investing cost of an energy router is high,and research on the economic operation of energy routers in distribution networks is little.Therefore,this paper establishes a planning model for energy routers considering peer-to-peer energy transactions among distribution networks,and explores the benefits of peer-to-peer energy transactions through energy router based multiple distribution networks.A structure of an energy router suitable for peer-to-peer energy transactions is selected,and a power flow calculation model based on a multilayer structure is established.The energy router’s scheduling model is established,and unique functions of the energy router and revenue of each distribution network are considered.A power flow calculation model based on peer-to-peer interconnection of multiple distribution networks through energy routers is also established.Finally,simulation results verify the effectiveness of the proposed planning model.Results show that peer-topeer energy transaction among distribution networks through energy routers can effectively reduce the comprehensive cost of distribution networks,significantly improve the power quality of the distribution networks,and reduce the impact of power fluctuation on the upstream grid incurred by the distribution network.展开更多
基金supported by the Beijing Natural Science Foundation (4102050)NSFC-KOSEF Joint Research Project of China and Korea(60811140343), and the CDSN, GIST.
文摘The existing active queue management （AQM） algorithm acts on subscribers and edge routers only, it does not support differentiate-serve （Diffserv） quality of service （QoS）, while the existing diffserv QoS has not considered the link capacities between edge routers and connected core routers. When a core router in a two layers’ network experiences congestion, the connected edge routers have no ability to adjust their access data rates. Thus, it is difficult to achieve the congestion control for the large scale network with many edge routers and core routers. To solve these problems, two difffserve AQM algorithms are proposed for the congestion control of multilayer network. One diffserv AQM algorithm implements fair link capacities of edge routers, and the other one implements unequal link capacities of edge routers, but it requires the core routers to have multi-queues buffers and Diffserv AQM to support. The proposed algorithms achieve the network congestion control by operating AQM parameters on the conditions of proposed three theorems for core and edge routers. The dynamic simulation results demonstrate the proposed control algorithms for core and edge routers to be valid.
文摘Compared with the traditional and inter-chip networks, on-chip networks （NoCs） have enormous wire resources which can be traded for improving other performance requirements. This means that much wider data links can be used for NoCs. This paper focuses on the area costs for on-chip routers under four different data-link widths： 8 bits, 16 bits, 128 bits, and 256bits. Firstly, a virtual-channel based on-chip router is introduced. Secondly, the components of the router are implemented by Verilog HDL models and synthesized by Quartus II 4.0 in a FPGA device. Finally, the area costs are analyzed. It can be seen from the results that data-link width has great influence on area costs of buffers and crossbar while has no influence on area costs of arbiter.
基金Supported in part by the National Science Foundation CAREER Award (No. CNS-0347686)US Department of Energy (DoE) (No. DE-FG02-04ER46136)
文摘A Prioritized Medium Access Control （P-MAC） protocol is proposed for wireless routers of mesh networks with quality-of-service provisioning. The simple yet effective design of P-MAC offers strict service differentiation for prioritized packets. A Markov model is developed to yield important performance matrices including the packet blocking probability due to queue overflow and the packet reneging probability due to delay bound. It is further proved that the service time of P-MAC approximates exponential distribution, and can be effectively estimated. The analytic models with preemptive and non-preemptive schemes, validated via simulations, show that P-MAC can effectively support traffic differentiation and achieve very low packet dropping （both reneging and blocking） probabilities when the traffic load is below the channel capacity. When the network is overloaded, P-MAC can still maintain extremely stable and high channel throughput. Moreover, it is demonstrated that P-MAC performs superior in multihop networks, further proving the advantages of the proposed protocol.
基金the National Natural Science Foundation of China under Grant Nos,90604029 and 60773150the National Grand Fundamental Research 973 Program of China under Grant No.2003CB314801.
文摘The exponential growth of user traffic has been driving routers to run at higher capacity. In a traditional router, the centralized switching fabric is becoming the bottleneck for its limited number of ports and complicated scheduling algorithms. Direct networks, such as 3-D Torus topology, have been successfully applied to the design of scalable routers. They show good scalability and fault tolerance. Unfortunately, its scalability is limited in practice. In this paper, we introduce another type of direct network, called H-Torus. This network shows excellent topological properties. On its basis, the designs of line card and routing algorithms are introduced. Extensive simulations show that the routing algorithm is very important in such a system and results in low latency with high throughput.
基金Supported by the Zhuhai City Industry-University-Research Project(ZH22017001200019PWC).
文摘Railway power system is an inseparable part of the power system,therefore,the intelligent architecture of the railway power system should also be focused on.The unique power supply characteristics of the railway power system are analyzed and integrated railway smart grid architecture based on energy routers is proposed.Importantly,three corresponding resilient mode control methods are suggested for the proposed architecture.In the fourth section,a simulation model corresponding to the resilient control mode is built and the simulation results prove the feasibility of the proposed control mode.Equally,for the novel network-connected backbone router(NCBR),a 1000 kVA,27.5/10 kV NCBR engineering prototype is used to prove its effectiveness in practical applications.Finally,a differentiation analysis is given,followed by conclusions regarding the traditional power system and proposed system.
基金Project supported by China Postdoctoral Science Foundation (Grant No.2023M732028)the Fund from Zhejiang Province Key Laboratory of Quantum Technology and Device (Grant No.20230201)+3 种基金the Fundamental Research Funds for the Provincial Universities of Zhejiang Province,China (Grant No.GK199900299012-015)the Natural Science Foundation of Zhejiang Province,China (Grant No.LY21A040003)the National Natural Science Foundation of China (Grant Nos.12164022,12174288,and 12274326)the Natural Science Foundation of Jiangxi Province,China (Grant No.20232BAB201044)。
文摘The dynamic control of single-photon scattering in a pair of one-dimensional waveguides mediated by a time-modulated atom-cavity system is investigated.Two cases,where the waveguides are coupled symmetrically or asymmetrically to the atom-cavity system,are discussed in detail.The results show that such time-modulated atom-cavity configuration can behave as a dynamical tunable directional single-photon router.The photons with different frequencies can dynamically be routed from the incident waveguide into any ports of the other with a 100%probability via adjusting the modulated amplitude or phases of the time-modulated atom-cavity coupling strengths,associate with the help of the asymmetrical waveguide-cavity couplings.Furthermore,the influence of dissipation on the routing capability is investigated.It is shown that the present single-photon router is robust against the dissipative process of the system,especially the atomic dissipation.These results are expected to be applicable in quantum information processing and design quantum devices with dynamical modulation.
基金supported by Program for National Basic Research Program of China (973 Program) "Reconfigurable Network Emulation Testbed for Basic Network Communication"
文摘Network Functions Virtualization(NFV) is an attempt to help operators more effectively manage their networks by implementing traditional network functions embedded in specialized hardware platforms in term of virtualized software instances. But, existing novel network appliances designed for NFV infrastructure are always architected on a general-purpose x86 server, which makes the performance of network functions limited by the hosted single server. To address this challenge, we propose ApplianceB ricks, a novel NFV-enable network appliance architecture that is used to explore the way of consolidating multiple physical network functions into a clustered network appliance, which is able to improve the processing capability of NFV-enabled network appliances.
基金supported in part by the Fundamental Research Funds for the Central Universities under Grant 2018JBZ004.
文摘A high proportion of renewable energy affects the power quality of distribution networks,and surplus energy will be sold to the upstream grid at a low price.In this paper,considering peer-to-peer energy transactions,the energy router-based multiple distribution networks are analyzed to solve the above problems and realize collaborative consumption of renewable energy.Presently,the investing cost of an energy router is high,and research on the economic operation of energy routers in distribution networks is little.Therefore,this paper establishes a planning model for energy routers considering peer-to-peer energy transactions among distribution networks,and explores the benefits of peer-to-peer energy transactions through energy router based multiple distribution networks.A structure of an energy router suitable for peer-to-peer energy transactions is selected,and a power flow calculation model based on a multilayer structure is established.The energy router’s scheduling model is established,and unique functions of the energy router and revenue of each distribution network are considered.A power flow calculation model based on peer-to-peer interconnection of multiple distribution networks through energy routers is also established.Finally,simulation results verify the effectiveness of the proposed planning model.Results show that peer-topeer energy transaction among distribution networks through energy routers can effectively reduce the comprehensive cost of distribution networks,significantly improve the power quality of the distribution networks,and reduce the impact of power fluctuation on the upstream grid incurred by the distribution network.
