深水ROV工具篮子结构设计载荷与屈服强度分析

水下机器人ROV(remote operated vehicle)工具篮子用于在陆地和深海中储存ROV安装工具,除方便ROV进行操作外,同时给ROV工具提供保护,能够很好地适应深远海环境,是水下生产系统的重要组成部件。其深海安装作业风险高、要求严,研究其安装全过程工况的强度性能对确保整个水下生产系统平稳运行具有重要作用。针对南海陵水气田使用的ROV工具篮子深海多种典型工况,计算得到设计载荷,然后对其进行有限元建模分析,计算不同载荷工况下的应力响应,对结构的屈服强度进行校核,以确保整体结构强度满足安全规范要求。计算结果表明:ROV工具篮子在多种提升工况、冲击工况以及运输工况下结构屈服强度均满足规范要求,在此基础上,指导现场使用的ROV工具篮子设计,整个海上安装及水下运行安全可靠。研究成果可为ROV工具篮子以及类似水下结构物的结构设计和深海安装提供理论基础和技术参考。

ROV Based Underwater Blurred Image Restoration

In this paper, we present a method of ROV based image processing to restore underwater blurry images from the theory of light and image transmission in the sea. Computer is used to simulate the maximum detection range of the ROV under different water body conditions. The receiving irradiance of the video camera at different detection ranges is also calculated. The ROV’s detection performance under different water body conditions is given by simulation. We restore the underwater blurry images using the Wiener filter based on the simulation. The Wiener filter is shown to be a simple useful method for underwater image restoration in the ROV underwater experiments. We also present examples of restored images of an underwater standard target taken by the video camera in these experiments.

Dynamics analysis of planar armored cable motion in deep-sea ROV system

The armored cable used in a deep-sea remotely operated vehicle(ROV) may undergo large displacement motion when subjected to dynamic actions of ship heave motion and ocean current. A novel geometrically exact finite element model for two-dimensional dynamic analysis of armored cable is presented. This model accounts for the geometric nonlinearities of large displacement of the armored cable, and effects of axial load and bending stiffness. The governing equations are derived by consistent linearization and finite element discretization of the total weak form of the armored cable system, and solved by the Newmark time integration method. To make the solution procedure avoid falling into the local extreme points, a simple adaptive stepping strategy is proposed. The presented model is validated via actual measured data. Results for dynamic configurations, motion and tension of both ends of the armored cable, and resonance-zone are presented for two numerical cases, including the dynamic analysis under the case of only ship heave motion and the case of joint action of ship heave motion and ocean current. The dynamics analysis can provide important reference for the design or product selection of the armored cable in a deep-sea ROV system so as to improve the safety of its marine operation under the sea state of 4 or above.

Research on Hydrodynamics Model Test for Deepsea Open-Framed Remotely Operated Vehicle

This paper presents the features of newly designed hydrodynamics test for the scaled model of 4500 m deepsea open-framed remotely operated vehicle （ROV）, which is being researched and developed by Shanghai Jiao Tong University. Accurate hydrodynamics coefficients measurement and spatial modeling of ROV are significant for the maneuverability and control algorithm. The scaled model of ROV was constructed by 1：1.6. Hydrodynamics coefficients were measured through VPMM and LAHPMM towing test. And dynamics model was derived as a set of equations, describing nonlinear and coupled 5-DOF spatial motions. Rotation control motion was simulated to verify spatial model proposed. Research and application of hydrodynamics coefficients are expected to enable ROV to overcome uncertainty and disturbances of deepsea environment, and accomplish some more challengeable and practical missions.

Virtual Reality Simulation of Fuzzy-logic Control during Underwater Dynamic Positioning

In this paper, graphical-user-interface （GUI） software for simulation and fuzzy-logic control of a remotely operated vehicle （ROV） using MATLABTM GUI Designing Environment is proposed. The proposed ROV＇s GUI platform allows the controller such as fuzzy-logic control systems design to be compared with other controllers such as proportional-integral-derivative （PID） and sliding-mode controller （SMC） systematically and interactively. External disturbance such as sea current can he added to improve the modelling in actual underwater environment. The simulated results showed the position responses of the fuzzy-logic control exhibit reasonable performance under the sea current disturbance.

Using Unmanned Underwater Vehicles as Research Platforms in Coastal Ocean Studies

The advantages of using unmanned underwater vehicles in coastal ocean studies are emphasized. Two types of representative vehicles, remotely operated vehicle (ROV) and autonomous underwater vehicle (AUV) from University of South Florida, are discussed. Two individual modular sensor packages designed and tested for these platforms and field measurement results are also presented. The bottom classification and albedo package, BCAP, provides fast and accurate estimates of bottom albedos, along with other parameters such as in-water remote sensing reflectance. The real-time ocean bottom optical topographer, ROBOT, reveals high-resolution 3-dimentional bottom topography for target identification. Field data and results from recent Coastal Benthic Optical Properties field campaign, 1999 and 2000, are presented. Advantages and limitations of these vehicles and applications of modular sensor packages are compared and discussed.

Automatic analysis of deep-water remotely operated vehicle footage for estimation of Norway lobster abundance

Underwater imaging is being used increasingly by marine biologists as a means to assess the abundance of marine resources and their biodiversity. Previously, we developed the first automatic approach for estimating the abundance of Norway lobsters and counting their burrows in video sequences captured using a monochrome camera mounted on trawling gear. In this paper, an alternative framework is proposed and tested using deep-water video sequences acquired via a remotely operated vehicle. The proposed framework consists of four modules:(1) preprocessing,(2) object detection and classification,(3) object-tracking, and(4) quantification. Encouraging results were obtained from available test videos for the automatic video-based abundance estimation in comparison with manual counts by human experts(ground truth). For the available test set, the proposed system achieved 100%precision and recall for lobster counting, and around 83% precision and recall for burrow detection.

OBLIQUE TOWING TEST AND MANEUVER SIMULATION AT LOW SPEED AND LARGE DRIFT ANGLE FOR DEEP SEA OPEN-FRAMED REMOTELY OPERATED VEHICLE

This article presents the newly designed oblique towing test in the horizontal plane for the scaled model of 4 500 m deep sea open-framed Remotely Operated Vehicle （ROV）,which is being researched and developed by Shanghai Jiao Tong University.Accurate hydrodynamics coefficients measurement is significant for the maneuverability and control system design.The scaled model of ROV was constructed by 1：1.6.Hydrodynamics tests of large drift angle were conducted through Large Amplitude Horizontal Planar Motion Mechanism （LAHPMM） under low speed.Multiple regression method is adopted to process the test data and obtain the related hydrodynamic coefficients.Simulations were designed for the horizontal plane motion of large drift angle to verify the coefficients calculated.And the results show that the data can satisfy with the design requirements of the ROV developed.