Transformer real-time reliability model based on operating conditions

Operational reliability evaluation theory reflects real-time reliability level of power system. The component failure rate varies with operating conditions. The impact of real-time operating conditions such as ambient temperature and transformer MVA (megavolt-ampere) loading on transformer insulation life is studied in this paper. The formula of transformer failure rate based on the winding hottest-spot temperature (HST) is given. Thus the real-time reliability model of transformer based on oper- ating conditions is presented. The work is illustrated using the 1979 IEEE Reliability Test System. The changes of operating conditions are simulated by using hourly load curve and temperature curve, so the curves of real-time reliability indices are ob- tained by using operational reliability evaluation.

The Design of I/O Subsystem in Satellite Real-Time Microkernel Operating System

One of the most important features of modern minor satellites is to realize autonomous moving. The performance of the satellite autonomous computer operating system acting as the control center is utmost important. The recent trend in operating system development is adopting microkernel architecture which holds such advantages as microminiaturization, modularity, portability and extendibility. The performance of I/O subsystem is currently receiving considerable research attention. Object-orientation offers an approach to application development in which software system can be constructed by composing and refining the pre-designed plug-compatible software components.It also starts with some basic notions fairly well accepted in computer science, namely encapsulation and reuse. In this paper, a new object-oriented real-time I/O subsystem model has been designed.In this model, the traditional I/O subsystem framework is discarded and a stream mechanism based on the object-oriented concept is introduced. In addition, the I/O requests are classified according to their time emergency to obtain real-time performance. So, this model meets such satelliteperformance requirements as reliability, flexibility, portability and real-time performance.

Digital arc welding power supply based on real-time operating system

A digital arc welding power supply was designed with the advanced reduced instruction set computer machine （ARM） and embedded real-time multi-task operating system micro C/OS- Ⅱ. The ARM, with its powerful calculating speed and complete peripheral equipments, is very suitable to work as the controller of the digital power supply. The micro C/OS- Ⅱ transplanted in ARM, helps to improve the respondent speed against various welding signals, as well as the reliability of the controlling software. The welding process consists of nine tasks. The tasks of great significance on reliability of the welder, for example, the A/D conversion of current and voltage, enjoy top priority. To avoid simultaneous-sharing on A/D converter and LCD module, two semaphores are introduced in to ensure the smooth performance of the welding power supply. Proven by experiments ,the ARM and the micro C/OS- Ⅱ can greatly improve both the respondent speed and the reliability of the digital welder.

A Smart Phone-oriented Embedded Real-time Operating System

This article presents an embedded Smart Phone Operating System (SPOS) independently designed by ZTE Corporation. The SPOS is based on single kernel architecture with its multi-task real-time kernel supporting hardware platforms and resources of mainstream mobile phones. It has remarkable advantages such as highly efficient and dynamic power management, priority - based preemptive scheduling, fast startup, a variety of drivers, and excellent system stability and operability. For the development of upper layer communication protocols and application software, the SPOS provides wireless communication interfaces and the application program framework.

Low-Power Operational Amplifier for Real-Time Signal Processing System of Micro Air Vehicle

A low-power complementary metal oxide semiconductor（CMOS） operational amplifier （op-amp） for real-time signal processing of micro air vehicle （MAV） is designed in this paper.Traditional folded cascode architecture with positive channel metal oxide semiconductor（PMOS） differential input transistors and sub-threshold technology are applied under the low supply voltage.Simulation results show that this amplifier has significantly low power,while maintaining almost the same gain,bandwidth and other key performances.The power required is only 0.12 mW,which is applicable to low-power and low-voltage real-time signal acquisition and processing system.

Real-Time Operation of Microgrids

Microgrid (MG) systems effectively integrate a generation mix of solar, wind, and other renewable energy resources. The intermittent nature of renewable resources and the unpredictable weather conditions contribute largely to the unreliability of microgrid real-time operation. This paper investigates the behavior of microgrid for different intermittent scenarios of photovoltaic generation in real-time. Reactive power coordination control and load shedding mechanisms are used for reliable operation and are implemented using OPAL-RT simulator integrated with Matlab. In an islanded MG, load shedding can be an effective mechanism to maintain generation-load balance. The microgrid of the German Jordanian University (GJU) is used for illustration. The results show that reactive power coordination control not only stabilizes the MG operation in real-time but also reduces power losses on transmission lines. The results also show that the power losses at some substations are reduced by a range of 6% - 9.8%.

A simulation-based software to support the real-time operational parameters selection of tunnel boring machines

With the fact that the main operational parameters of the construction process in mechanized tunneling are currently selected based on monitoring data and engineering experience without exploiting the advantages of computer methods,the focus of this work is to develop a simulation-based real-time assistant system to support the selection of operational parameters.The choice of an appropriate set of these parameters(i.e.,the face support pressure,the grouting pressure,and the advance speed)during the operation of tunnel boring machines(TBM)is determined by evaluating different tunneling-induced soil-structure interactions such as the surface settlement,the associated risks on existing structures and the tunnel lining behavior.To evaluate soil-structure behavior,an advanced process-oriented numerical simulation model based on the finite cell method is utilized.To enable the real-time prediction capability of the simulation model for a practical application during the advancement of TBMs,surrogate models based on the Proper Orthogonal Decomposition and Radial Basis Functions(POD-RBF)are adopted.The proposed approach is demonstrated through several synthetic numerical examples inspired by the data of real tunnel projects.The developed methods are integrated into a user-friendly application called SMART to serve as a support platform for tunnel engineers at construction sites.Corresponding to each user adjustment of the input parameters,i.e.,each TBM driving scenario,approximately two million outputs of soil-structure interactions are quickly predicted and visualized in seconds,which can provide the site engineers with a rough estimation of the impacts of the chosen scenario on structural responses of the tunnel and above ground structures.

A Concept of Dynamically Reconfigurable Real-time Vision System for Autonomous Mobile Robotics

This paper describes specific constraints of vision systems that are dedicated to be embedded in mobile robots. If PC-based hardware architecture is convenient in this field because of its versatility, flexibility, performance, and cost, current real-time operating systems are not completely adapted to long processing with varying duration, and it is often necessary to oversize the system to guarantee fail-safe functioning. Also, interactions with other robotic tasks having more priority are difficult to handle. To answer this problem, we have developed a dynamically reconfigurable vision processing system, based on the innovative features of Cleopatre real-time applicative layer concerning scheduling and fault tolerance. This framework allows to define emergency and optional tasks to ensure a minimal quality of service for the other subsystems of the robot, while allowing to adapt dynamically vision processing chain to an exceptional overlasting vision process or processor overload. Thus, it allows a better cohabitation of several subsystems in a single hardware, and to develop less expensive but safe systems, as they will be designed for the regular case and not rare exceptional ones. Finally, it brings a new way to think and develop vision systems, with pairs of complementary operators.

Analysis and Comparison of Five Kinds of Typical Device-Level Embedded Operating Systems

Today, the number of embedded system was applied in the field of automation and control has far exceeded a variety of general-purpose computer. Embedded system is gradually penetrated into all fields of human society, and ubiquitous embedded applications constitute the 'ubiquitous' computing era. Embedded operating system is the core of the em-bedded system, and it directly affects the performance of the whole system. Our Liaoning Provincial Key Laboratory of Embedded Technology has successfully developed five kinds of device-level embedded operating systems by more than ten years’ efforts, and these systems are Webit 5.0, Worix, μKernel, iDCX 128 and μc/os-II 128. This paper mainly analyses and compares the implementation mechanism and performance of these five kinds of device-level embedded operating systems in detail.

MODEL-BASED DEVELOPMENT OF REAL-TIME SOFTWARE SYSTEM FOR ELECTRONIC UNIT PUMP SYSTEM

A real-time operating system （RTOS）, also named OS, is designed based on the hardware platform of MC68376, and is implemented in the electronic control system for unit pump in diesel engine. A parallel and time-based task division method is introduced and the multi-task software architecture is built in the software system for electronic unit pump （EUP） system. The V-model software development process is used to control algorithm of each task. The simulation results of the hardware-in-the-loop simulation system （HILSS） and the engine experimental results show that the OS is an efficient real-time kernel, and can meet the real-time demands of EUP system; The built multi-task software system is real-time, determinate and reliable. V-model development is a good development process of control algorithms for EUP system, the control precision of control system can be ensured, and the development cycle and cost are also decreased.

Architecture of the Graphics System for Embedded Real-Time Operating Systems

This paper presents a new architecture of a graphics system for microkernel operating systems,including real-time operating systems.The following major parts of the architecture are presented:a user-level subsystem responsible for interaction with user applications;a bottom-level subsystem providing the functionality for graphics drivers,such as managing graphics output,video memory management,etc.;a kernel-level subsystem providing interaction with the kernel,and performing low-level operations,such as working with physical memory,processes,etc.The mechanisms of interaction of user applications with the user level of the graphics system,as well as interaction of the different levels of the graphics subsystem are presented.The paper pays much attention to various approaches to testing:the use of unit testing,testing using hardware and software emulators.Another important characteristic of a graphics system is its performance,in particular the performance of low-level operations such as memory allocation:the developed architecture suggests using a separate memory allocator which is faster than standard memory allocation functions.Comparison of the performances of graphics system implementation for microkernel real-time operating system and graphics server Xorg is presented,showing significant superiority of the proposed architecture in a number of work scenarios.

DEVELOPMENT OF AN AIRBORNE SAR REAL-TIME DIGITAL IMAGING PROCESSOR

An airborne SAR real-time digital imaging processor is presented, and its realtime digital imaging principle and main technical parameters are analyzed briefly. The system configuration and logical structure are described in detail. Finally the main features of this system and examples of imagery obtained with the system are also presented.

High performance reconfigurable hardware system for real-time image processing

A novel reconfigurable hardware system which uses both muhi-DSP and FPGA to attain high performance and real-time image processing are presented. The system structure and working principle of mainly processing multi-BSP board, extended multi-DSP board are analysed. The outstanding advantage is that the communication among different board components of this system is supported by high speed link ports ＆ serial ports for increasing the system performance and computational power. Then the implementation of embedded real-time operating systems （RTOS） by us is discussed in detail. In this system, we adopt two kinds of parallel structures controlled by RTOS for parallel processing of algorithms. The experimental results show that exploitive period of the system is short, and maintenance convenient. Thus it is suitable for real-time image processing and can get satisfactory effect of image recognition.

Influences of Network Delay on Quality of Experience for Soft Objects in Networked Real-Time Game with Haptic Sense

In this paper, we investigate the influences of network delay on QoE (Quality of Experience) such as the operability of haptic interface device and the fairness between players for soft objects in a networked real-time game subjectively and objectively. We handle a networked balloon bursting game in which two players burst balloons (i.e., soft objects) in a 3D virtual space by using haptic interface devices, and the players compete for the number of burst balloons. As a result, we find that the operability depends on the network delay from the local terminal to the other terminal, and the fairness is mainly dependent on the difference in network delay between the players’ terminals. We confirm that there exists a trade-off relationship between the operability and the fairness. We also see that the contribution of the fairness is larger than that of the operability to the comprehensive quality (i.e., the weighted sum of the operability and fairness). Assessment results further show that the output timing of terminals should be adjusted to the terminal which has the latest output timing to maintain the fairness when the difference in network delay between the terminals is large. In this way, the comprehensive quality at each terminal can be maintained as high as possible.

风河公司取得FSM实验室Hard Real-Time Linux技术

设备软件优化（DSO）厂商风河系统公司日前宣布．风河已取得由FSM实验室（Finite State Machine Labs．Inc,FSMLabs）开发的设备软件业界惟一的商用级“硬”实时（hard real-time）Linux技术——RTLinux。风河公司此次获得了该项技术的全套知识产权．包括专利权，著作权、商标注册和其他相关产品的所有权。

嵌入式实时系统RTLINUX的实现和测试

RTLINUX是LINUX的嵌入式实时核心,该文首先深入地分析RTLINUX的实现原理和机制,给出了在RTLINUX下编写实时应用程序的方法。并在此基础上,设计和实现了测试RTLINUX实时性能的系统,并对测试结果进行了分析。

基于RTLinux操作系统的开放式数控系统运动控制器的研究

系统选用了实时多任务操作系统RTLinux作为软件开发平台,以C和C++作为软件开发工具来开发设计了开放式数控系统的运动控制器。这里论述了运动控制器的总体功能特性,并分别介绍了运动控制器的几个重要组成部分,如主控程序、插补模块及速度控制等。最后采用基于组件技术的设计思想,给出了运动控制器的设计框架,并在RTLinux平台上加以实现。

RTLinux在雷达信号采集处理系统的应用

介绍了RTLinux的结构特点,提出对某雷达信号采集处理系统改进的设计方案,分析了雷达信号采集处理系统的软硬件组成。重点研究了RTLinux对该系统的实时模块的任务控制方法。并给出了非实时任务的实现结果,在RTLinux下对中断响应时间进行了实时性能测试。结果表明,RTLinux具有好的实时性能,新系统的实时和稳定等性能得以提高。

基于RTLinux的机器人控制操作系统实现

RTLinux操作系统具有实时性、完备性和源代码开放等很多优点.结合机器人的特点,讨论了将嵌入式RTLinux操作系统应用到机器人控制操作系统中的一些关键问题,重点介绍了构造机器人操作系统的软件设计方法.构造的操作系统在移动机器人平台上进行了实验,取得了较好的控制结果.为机器人控制的深入研究打下基础.

Architecture of Graphics System with 3D Acceleration Support for Embedded Operating Systems

An increasing number of tasks now require the use of hardware accelerators to reduce the time required for computation and display the computational results.This paper presents a new graphics system architecture for operating systems(OSs)with microkernel architecture,including real-time OSs.The proposed system architecture provides capabilities for displaying graphical images on various information display devices and for accelerating graphical operations on GPU.The architecture of the graphics system uses a concept of allocators to manage system and video memory,provides an abstraction of memory operations with a single interface for video memory management,and simplifies memory handling where incorrect operation is the cause of many failures.A comparison between the performance of a real-time OS and Linux OS implementing the graphics system using the example of a glmark2 benchmark is presented,thereby the superiority of the proposed architecture in several scenarios is demonstrated.