Hydrodynamic Assessment of A New Nature-Based Armour Unit on Rubble Mound Breakwater for Coastal Protection

This research proposes a novel nature-based design of a new concrete armour unit for the cover layer of a rubblemoundbreakwater. Armour units are versatile with respect to shape, orientation, surface condition details, and porosity.Therefore, a detailed analysis is required to investigate the exact state of their hydraulic interactions and structuralresponses. In this regard, the performance results of several traditional armour units, including the Antifer cube,Tetrapod, X-block and natural stone, are considered for the first step of this study. Then, the related observed resultsare compared with those obtained for a newly designed (artificial coral) armour unit. The research methodology utilizesthe common wave flume test procedure. Furthermore, several verified numerical models in OpenFOAM code areused to gain the extra required data. The proposed armour is configured to provide an effective shore protection as anenvironmental-friendly coastal structure. Thus it is designed with a main trunk including deep grooves to imitate thetypical geometry of a coral type configuration, so as to attain desirable performance. The observed results and ananalytic hierarchy process (AHP) concept are used to compare the hydraulic performance of the studied traditionaland newly proposed (artificial coral) armour units. The results indicate that the artificial coral armour unit demonstratesacceptable performance. The widely used traditional armour units might be replaced by newer designs for betterwave energy dissipation, and more importantly, for fewer adverse effects on the marine environment.

Wave Force on the Crown Wall of Rubble Mound Breakwaters at Intermediate Depths

Rubble mound breakwaters with a crown wall are a common coastal engineering structure.The wave force on crown walls is an important parameter for the practice engineering design.Particularly,the wave force on crown walls under intermediate depths has been studied through physical model tests and numerical simulations.In this study,a three-dimensional numerical wave flume was developed to investigate monochromatic wave interactions in a rubble mound breakwater with a crown wall.Armor blocks were modeled in detail.The Navier-Stokes equations for two-phase incompressible flows,combined with shear stress transport k-ωturbulence model and volume of fluid method for tracking the free surface,were solved.A set of laboratory experiments were performed to validate the adopted model.Subsequently,a series of numerical simulations were implemented to examine the impacts of different hydrodynamic parameters(including wave height,incident wave period,and water depth)and the berm width on the wave force of the crown wall.Finally,a comparison of the experimental results and Martin method shows that the latter method is not suitable for this experimental scope.New empirical formulas are proposed to predict the wave force on crown walls under intermediate depth.The results can provide a basis for the design of crown wall of rubble mound breakwaters at intermediate depths.

A Study on Some Causes of Rubble Mound Breakwater Failure

Rubble mound breakwater, one of the protection structures, has been widely used in coastal and port engineering. Block stones were first used as its armor layer, and its use was limited to shallow sea areas where there is no large waves. Since the specially-shaped armor unit was developed, the rubble mound breakwater has become the main sort of the protection structures, which can be used in deep water zones where storm sometimes occurs. Owing to severe and complex surrounding conditions, the rubble mound breakwater failure sometimes occurs, thus the study on the causes of failure is of great importance. In the present study some breakwater failures at home and abroad are illustrated and the causes of failure are investigated from the point of view of design, test, construction and maintenance.

Experimental Research on Wave Transmission over Submerged Rubble-Mound Breakwaters

This paper discusses some previous, and presents some new experimental results on wave transmission over submerged breakwaters. The objective of this study is to evaluate wave transmission coefficient and develop a two-dimensional （2D） model as an improvement to the existing wave transmission coefficient models. Factors which affect wave transmission over stbmerged breakwaters are discussed through a series of laboratory experiments. Basic recommendations for evaluation and design of submerged rubble-monud breakwaters are presented. From the test results, a calculation formula of wave transmission coefficient is proposed.

Numerical Analysis of Ice Rubble with a Freeze-Bond Model in Dilated Polyhedral Discrete Element Method

Freezing in ice rubble is a common phenomenon in cold regions,which can consolidate loose blocks and change their mechanical properties.To model the cohesive effect in frozen ice rubble,and to describe the fragmentation behavior with a large external forces exerted,a freeze-bond model based on the dilated polyhedral discrete element method(DEM)is proposed.Herein,imaginary bonding is initialized at the contact points to transmit forces and moments,and the initiation of the damage is detected using the hybrid fracture model.The model is validated through the qualitative agreement between the simulation results and the analytical solution of two bonding particles.To study the effect of freeze-bond on the floating ice rubble,punch-through tests were simulated on the ice rubble under freezing and nonfreezing conditions.The deformation and resistance of the ice rubble are investigated during indenter penetration.The influence of the internal friction coefficient on the strength of the ice rubble is determined.The results indicate that the proposed model can properly describe the consolidated ice rubble,and the freeze-bond effect is of great significance to the ice rubble properties.

Applying the AHP-FUZZY method to evaluate the measure effect of rubble roadbed engineering in permafrost regions of Qinghai-Tibet Plateau: a case study of Chaidaer-Muli Railway

This article attempts to investigate the measure effect of rubble roadbed engineering in permafrost regions of Qinghai-Tibet Plateau. As a case study, Chaidaer-Muli Railway is used to evaluate the measure effect of rubble roadbed engineering in permafrost regions. The AHP(Analytic Hierarchy Process) method is thus employed to establish the evaluation indicator system. The evaluation factor is selected by analyzing the mutual relation between the permafrost environment and roadbed engineering. Thus, a hierarchical structure model is established based on the selected evaluation indices. Each factor is weighted to determine the status in the evaluation system, and grading standards are built for providing a basis for the evaluation. Then, the fuzzy mathematical method is introduced to evaluate the measure effect of rubble roadbed engineering in permafrost regions along the Chadaer-Muli Railway. Results show that most of the permafrost roadbed is in a preferable condition(b) along the Chaidaer-Muli Railway due to rubble engineering measures. This proportion reaches to 86.1%. The proportion in good(a), general(c) and poor states(d) are 0.0%, 7.5% and 6.4%, respectively, in all the evaluation sections along the Chaidaer-Muli Railway. Ground-temperature monitoring results are generally consistent with AHP-FUZZY evaluation results. This means that the AHP-FUZZY method can be applied to evaluate the effect of rubble roadbed engineering measures in permafrost regions. The effect evaluation of engineering measures will provide timely and effective feedback information for further engineering design. The series of engineering measures will more effectively protect permafrost stability.

Experimental Study on Friction Coefficient Between Concrete and the Top Surface of Rubble Mound Foundation

Experimental studies on the friction coefficient between concrete and the top surface of a rubble mound foundation in China are reviewed. Through comparison of different test results, the development of this research is comprehensively analyzed. An experiment is carried out in the condition similar to prototype. The process curve of friction coefficient with the test block sliding is analyzed and a standard for determination of the friction coefficient is defined. The variation features of the friction coefficient are analyzed on the basis of the present experimental results and other studies in China. It is shown that the friction coefficient between concrete and the top surface of a rubble mound foundation decreases with the increase of the foundation pressure, and the friction coefficient for a very fine leveling bed is smaller than that for a fine leveling bed.

Experiment for Determination of Dry-Laid Stone Armour Layer Thickness of Rubble Mound Breakwaters

Through hydraulic model experiment and site investigation, this paper has derived a calculation formula of dry-laid stone armour layer thickness of rubble mound breakwaters for fishery harbours. The influences of the friction force between stone blocks and the variations of wave length or period and water depth are considered in the formula. The calculated results of several existing structures are in good agreement with field data. This formula is more practical than those ever published both at home and abroad, and has been adoptted by the technical standards of aquatic projects published by the Ministry of Agriculture of China. It is applicable for the calculation of dry-laid stone armour layer of breakwater for small- or medium-size harbours.

Irregular wave－induced seepage action on cylinders resting on rubble mound foundation

In this paper, the irregular wave-induced seepage action on cylinders resting on rubble mound foundatoin (RMF) is studied by means of finite element method (FEM). The hydraulic resistance inside RMF is assumed to satisfy the nonlinear Forchheimer's equation and the seepage in the scabed is also considered. Model tests show good agreementwith the numerical results. The influence of several main parameters is discussed on the basis of vast calculations. In addition, the ratio of seepage forces, induced by regular and irregular waves respectively, is analyzed and thus a computaional method is put forward for practical engineering application to simplify the calculation of irregular wave-induced seepage forces.

论新设备在建设工程的革命作用——Rubble Master碎石王,变“废”为“宝”的机械设备

Rubble Master碎石王打破传统思维,用超前设计理念推出新设备,该破碎机具有类似于回收机的显著特点,突出高效率,低成本;提供多种可选择的工程解决方案,满足用户各种工程特点的需要。

Rubble Master RM系列碎石机

继2003年推出RM80碎石机后,Rubble Master公司在bauma 2004又推出了RM70碎石机。以12项全新的技术创新为特色的RM70,将引领建筑机械的发展潮流。 RM70最新的发展在于结合了该公司十多年碎石机的成功经验和小型再生机的优点,生严能力介于此前成功推出的RM60和RM80之间,以其出色的设计。

Rising from the Rubble of the Quake

ＲｉｓｉｎｇｆｒｏｍｔｈｅＲｕｂｂｌｅｏｆｔｈｅＱｕａｋｅＢｙｓｔａｆｆｒｅｐｏｒｔｅｒＢＬＡＮＨＵＩＶｉｃｅＭａｙｏｒＨａｎＳｈｅｎｇｙｕｔａｌｋｉｎｇａｂｏｕｔｔｈｅｃｈａｎｇｅｓｏｆＴａｎｇｓｈａｎｏｖｅｒｔｈｅｐｅｓｔｔｗｏｄｅｃａｄｅｓ．Ｉ...

The induced wave energy damping effect owing to rearrangement rubble mound breakwater

To maintain the calmness of the harbor,rubble mound breakwaters are one of the practical measures to protect sailing and mooring waters.This paper investigates the effect of relocated rubble mound breakwaters on tranquillity in Busan yacht range and the impact of bridge piers at the entrance of the yacht range based on physical hydraulic modeling using multi-directional random waves.It is obtained that the sufficient tranquillity can be due to securely moored yachts,owing to newly relocated rubble mound breakwaters away from piers.The experimental results also showed the distribution of the energy difference’dependence on various wave directions.The experimental findings are valuable for the design of Busan yacht marina,and are of reference to other port projects.

Relics Reduced to Rubble

Quake damage leaves worst cultural relic loss in 60 years The deadly earthquake in Sichuan has not only taken tens of thousand of lives and left millions homeless, but it has also had a cultural impact. Standing on the rubble of a temple in Dujiangyan City that was heavily dam- aged after the May 12 earthquake,

Rising From The Rubble

May 12 will always conjure up tragic images in Chinese minds. A year after the devastating earthquake in Sichuan Province, people in the disaster area are rebuilding their home-

Reborn From the Rubble

Rural villagers hit hard by the 2008 earthquake start to live a better life The devastating 2008 Sichuan Province earthquake froze life for Luo Village’s 49-year-old

The Quality Improvement of Stony Construction and Demolition Waste (CDW)

Worldwide construction and demolition waste (CDW) is currently dumped. To close the building cycle and the building materials cycle by recycling CDW in high technical applications, the technical quality of stony materials must be improved. For this purpose, concrete rubbles and brick rubbles, the two major stony constituents of CDW, should be separated from each other. Based on the differences in density and content of Fe-2O-3 between the two materials, a wet method of jigging and a dry method of magnetic separation are effective,tested.

Numerical Modelling Investigation of Wave Interaction on Composite Berm Breakwater

The breakwaters have experienced many changes during their construction history.These changes have been considered to improve their performance,depending on their environmental conditions and applications.Numerical modelling was conducted using FLOW-3 D software.In this study,the wave overtopping from composite berm breakwater as new conceptual structure and the pressure imposed on the composite berm breakwater are considered and investigated.The results show a decrease of 84.01,70.88 and 61.42 percent of the wave overtopping in the composite berm breakwater,in comparison to the rubble mound breakwater,horizontally caisson breakwater and caisson breakwater,respectively.Also,the pressure applied to the composite berm breakwater with the pressure applied to the horizontally caisson breakwater was compared and evaluated.Composite berm breakwater compared with horizontally caisson breakwater in P1,the amount of the obtained pressure decreased by 52.09%,in P2 the amount of the obtained pressure decreased by 63.07%,in P3 decreased by 76.09%and in Pu,this pressure reduced by53.92%.For the composite berm breakwater,the impact of three types of berms,homogenous berm(Type 1),a berm consisting of armor-filter(Type 2)and multi-layer berm(Type 3)with the aim of optimizing the hydraulic responses and wave interaction on the caisson of the breakwater was examined and evaluated.In total,Type 3 will be recommended with a significant reduction in the overtopping values and maximum pressure.

Brief Account of Breakwater Construction in China

-The construction of breakwaters in China in more than 40 years since the founding of the People's Republic of China is reviewed. The construction of two main types of breakwater, upright breakwaters and rubble mound breakwaters, and the way in which they are built are expounded. Recommendations to improve the technology for future breakwater construction are presented.

Breccia-cored columnar rosettes in a rubbly pahoehoe lava flow,Elephanta Island,Deccan Traps,and a model for their origin

Rubbly pahoehoe lava flows are abundant in many continental flood basalts including the Deccan Traps.However,structures with radial joint columns surrounding cores of flow-top breccia(FTB),reported from some Deccan rubbly pahoehoe flows,are yet unknown from other basaltic provinces.A previous study of these Deccan "breccia-cored columnar rosettes" ruled out explanations such as volcanic vents and lava tubes,and showed that the radial joint columns had grown outwards from cold FTB inclusions incorporated into the hot molten interiors.How the highly vesicular(thus low-density)FTB blocks might have sunk into the flow interiors has remained a puzzle.Here we describe a new example of a Deccan rubbly pahoehoe flow with FTB-cored rosettes,from Elephanta Island in the Mumbai harbor.Noting that(1)thick rubbly pahoehoe flows probably form by rapid inflation(involving many lava injections into a largely molten advancing flow),and(2)such flows are transitional to 'a'a flows(which continuously shed their top clinker in front of them as they advance),we propose a model for the FTB-cored rosettes.We suggest that the Deccan flows under study were shedding some of their FTB in front of them as they advanced and,with high-eruption rate lava injection and inflation,frontal breakouts would incorporate this FTB rubble,with thickening of the flow carrying the rubble into the flow interior.This implies that,far from sinking into the molten interior,the FTB blocks may have been rising,until lava supply and inflation stopped,the flow began solidifying,and joint columns developed outward from each cold FTB inclusion as already inferred,forming the FTB-cored rosettes.Those rubbly pahoehoe flows which began recycling most of their FTB became the 'a'a flows of the Deccan.