To study the effect of guide vane outlet angle on pump performance and impeller radial force in an axial-flow heart pump, guide vane outlet angle/34 is considered to be 20°, 15°, 10°, 5° and 3°...To study the effect of guide vane outlet angle on pump performance and impeller radial force in an axial-flow heart pump, guide vane outlet angle/34 is considered to be 20°, 15°, 10°, 5° and 3° respectively. Based on ANSYS Fluent, numerical results of pump head and efficiency are validated by exper/ment results, in which Xanthan gum solutions are used with concentration of 0.06 wt. % as working fluid. Then, the effects of/34 on pump performance and impeller radial force are discussed, the errors of head and efficiency between test and simulation are within 5%. The results a/so indicate that the pump performance and efficiency are much better than those of other angles when guide vane outlet angle/34 is 10°, and the maximum variations in head and efficiency are 1.9% and 2.2%, respectively. With/34 increasing, the pulsation of radial force decreases firstly and then increases, when/34 is 10°, the minimum pulsation is 0. 0392N, which is about 80% of the maximum pulsation amplitude.展开更多
A multidisciplinary optimization was conducted to simultaneously improve the efficiency and reduce the radial force of a single-channel pump for wastewater treatment. A hybrid multi-objective evolutionary algorithm wa...A multidisciplinary optimization was conducted to simultaneously improve the efficiency and reduce the radial force of a single-channel pump for wastewater treatment. A hybrid multi-objective evolutionary algorithm was coupled with a surrogate model to optimize the geometry of the single-channel pump volute. Steady and unsteady Reynolds-averaged Navier-Stokes equations with a shear stress transport turbulence model were discretized using finite volume approximations and were then solved on tetrahedral grids to analyze the flow in the single-channel pump. The three objective functions represented the total efficiency, the sweep area of the radial force during one revolution, and the distance of the mass center of sweep area from the origin while the two design variables were related to the cross-sectional area of the internal flow of the volute. Latin hypercube sampling was employed to generate twelve design points within the design space, and response surface approximation models were constructed as surrogate models for the objectives based on the values of the objective function at the given design points. A fast non-dominated sorting genetic algorithm for local search was coupled with the surrogate models to determine the global Pareto-optimal solutions. The trade-off between the objectives was determined and was described in terms of the Pareto-optimal solutions. The results of the multi-objective optimization showed that the optimum design simultaneously improved the efficiency and reduced the radial force relative to those of the reference design.展开更多
In order to improve the performances of a cycloid gerotor pump,the variations of the radial force induced by different rotating speeds and outlet pressures are analyzed numerically.Using the numerical simulations as a...In order to improve the performances of a cycloid gerotor pump,the variations of the radial force induced by different rotating speeds and outlet pressures are analyzed numerically.Using the numerical simulations as a basis,an improved oil inlet and outlet groove structure is proposed.The results show that the radial force decreases with the decrease of the outlet pressure and of the rotor speed.Compared with the original model,the large-end oil inlet line and pressure line of the new oil groove are claw-shaped.This configuration can effectively weaken the pressure changes inside the gerotor pump and reduce accordingly the radial force on the inner rotor.展开更多
The annular volute is typically used in a slurry pump to reduce the collisions between solid particles and the volute tongue and to achieve a better resistance to blocking. However, only limited studies regarding annu...The annular volute is typically used in a slurry pump to reduce the collisions between solid particles and the volute tongue and to achieve a better resistance to blocking. However, only limited studies regarding annular volutes are available, and there is no systematic design method for annular volutes. In this study, the influence of volute casing cross-sectional flow area on the hydraulic loss, pressure pulsations, and radial force under varying working conditions in a centrifugal ceramic pump are discussed in detail. Experimental tests were conducted to validate the numerical results. The results indicated that, when the volute casing flow area increases, the hydraulic performance decreases marginally under the rated working conditions, but increases at the o-design points, specifically under large flow condition. However, the volute casing with a larger flow area has a wider high-e ciency region. In addition, the increase in the volute casing flow area will decrease the pressure pulsations in the volute, regardless of the working condition, and decrease the radial force on the shaft, therefore, providing an improved pump operational stability. It is anticipated that this study will be of benefit during the design of annular volutes.展开更多
The radial force is a critical factor to determine the sealing performance of radial lip seals.The effects of radial force produced by garter spring and interference on the static contact properties and sealing perfor...The radial force is a critical factor to determine the sealing performance of radial lip seals.The effects of radial force produced by garter spring and interference on the static contact properties and sealing performance of a radial lip seal are investigated by numerical simulations and experiments.Finite-element analysis and mixed elastohydrodynamic lubrication simulation are used.Radial force,contact width,temperature in the sealing zone,the reverse pumping rate and friction torque are measured.A critical value of interference for a cost-effectively designed radial lip seal is found.Spring force is required to compensate the decrease of the radial force because of the interference and used as a possible way to obtain intelligent control of sealing performance.The quantitative results gotten in this study could provide guide for the seal design and improvement.展开更多
基金Supported by the National Natural Science Foundation of China(No.51574161)the Education Science Project of Young and Middle-aged Teachers of Universities in Fujian Province(No.JZ160396)
文摘To study the effect of guide vane outlet angle on pump performance and impeller radial force in an axial-flow heart pump, guide vane outlet angle/34 is considered to be 20°, 15°, 10°, 5° and 3° respectively. Based on ANSYS Fluent, numerical results of pump head and efficiency are validated by exper/ment results, in which Xanthan gum solutions are used with concentration of 0.06 wt. % as working fluid. Then, the effects of/34 on pump performance and impeller radial force are discussed, the errors of head and efficiency between test and simulation are within 5%. The results a/so indicate that the pump performance and efficiency are much better than those of other angles when guide vane outlet angle/34 is 10°, and the maximum variations in head and efficiency are 1.9% and 2.2%, respectively. With/34 increasing, the pulsation of radial force decreases firstly and then increases, when/34 is 10°, the minimum pulsation is 0. 0392N, which is about 80% of the maximum pulsation amplitude.
文摘A multidisciplinary optimization was conducted to simultaneously improve the efficiency and reduce the radial force of a single-channel pump for wastewater treatment. A hybrid multi-objective evolutionary algorithm was coupled with a surrogate model to optimize the geometry of the single-channel pump volute. Steady and unsteady Reynolds-averaged Navier-Stokes equations with a shear stress transport turbulence model were discretized using finite volume approximations and were then solved on tetrahedral grids to analyze the flow in the single-channel pump. The three objective functions represented the total efficiency, the sweep area of the radial force during one revolution, and the distance of the mass center of sweep area from the origin while the two design variables were related to the cross-sectional area of the internal flow of the volute. Latin hypercube sampling was employed to generate twelve design points within the design space, and response surface approximation models were constructed as surrogate models for the objectives based on the values of the objective function at the given design points. A fast non-dominated sorting genetic algorithm for local search was coupled with the surrogate models to determine the global Pareto-optimal solutions. The trade-off between the objectives was determined and was described in terms of the Pareto-optimal solutions. The results of the multi-objective optimization showed that the optimum design simultaneously improved the efficiency and reduced the radial force relative to those of the reference design.
基金supported by the Zhejiang Provincial Natural Science Foundation of China(No.LY19E050003)the National Natural Science Foundation of China(No.51779226).
文摘In order to improve the performances of a cycloid gerotor pump,the variations of the radial force induced by different rotating speeds and outlet pressures are analyzed numerically.Using the numerical simulations as a basis,an improved oil inlet and outlet groove structure is proposed.The results show that the radial force decreases with the decrease of the outlet pressure and of the rotor speed.Compared with the original model,the large-end oil inlet line and pressure line of the new oil groove are claw-shaped.This configuration can effectively weaken the pressure changes inside the gerotor pump and reduce accordingly the radial force on the inner rotor.
基金Supported by National Natural Science Foundation of China(Grant No.51779107)Jiangsu Provincial Natural Science Foundation of China(Grant No.BK20170548)+1 种基金Postdoctoral Science Foundation of China(Grant No.2017M611724)Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD)
文摘The annular volute is typically used in a slurry pump to reduce the collisions between solid particles and the volute tongue and to achieve a better resistance to blocking. However, only limited studies regarding annular volutes are available, and there is no systematic design method for annular volutes. In this study, the influence of volute casing cross-sectional flow area on the hydraulic loss, pressure pulsations, and radial force under varying working conditions in a centrifugal ceramic pump are discussed in detail. Experimental tests were conducted to validate the numerical results. The results indicated that, when the volute casing flow area increases, the hydraulic performance decreases marginally under the rated working conditions, but increases at the o-design points, specifically under large flow condition. However, the volute casing with a larger flow area has a wider high-e ciency region. In addition, the increase in the volute casing flow area will decrease the pressure pulsations in the volute, regardless of the working condition, and decrease the radial force on the shaft, therefore, providing an improved pump operational stability. It is anticipated that this study will be of benefit during the design of annular volutes.
基金supported by the National Natural Science Foundation of China(Grant No.51175283)the National Science and Technology Major Project of China(Grant No.2013ZX04010021)the Ph.D Programs Foundation of Ministry of Education of China(Grant No.20130002110006)
文摘The radial force is a critical factor to determine the sealing performance of radial lip seals.The effects of radial force produced by garter spring and interference on the static contact properties and sealing performance of a radial lip seal are investigated by numerical simulations and experiments.Finite-element analysis and mixed elastohydrodynamic lubrication simulation are used.Radial force,contact width,temperature in the sealing zone,the reverse pumping rate and friction torque are measured.A critical value of interference for a cost-effectively designed radial lip seal is found.Spring force is required to compensate the decrease of the radial force because of the interference and used as a possible way to obtain intelligent control of sealing performance.The quantitative results gotten in this study could provide guide for the seal design and improvement.
