Application of Radio Frequency Identification (RFID) in Dairy Information Management

As a kind of brand-new technology, radio frequency identification management, data control and acquisition. This paper introduced food safety system construction, analyzed the advantages and problems in dairy modem suggestions for solution according to the practical situation. （RFID） plays an important role in dairy information tracing and culture function extension of managing breeding technology, and finally put forward some

Remanufacturing Closed-Loop Supply Chain Model with Radio Frequency Identification Affecting Recycling Rate

In order to construct a resource-saving and environmentfriendly society,the advantages of radio frequency identification(RFID) were considered.And it put forward the idea of introducing RFID in the recycling activities of waste products.Taking into account such elements as the technical level of RFID,cost saving from remanufacturing and the cost of RFID tags,both centralized and decentralized supply chain models with different participants in waste product collection were created,in order to determine the optimal pricing strategy and RFID technical level.In the end,sensitivity analyses were conducted to analyze the impacts of scaling parameter for additional increased recovery rate with RFID on pricing and RFID technology level,and impacts of cost saving on the profits of participants in different remanufacturing closed-loop supply chain models.

RFID技术在食品智能包装和供应链追溯中的应用研究

目的介绍RFID技术,综述其在智能包装、食品供应链追溯的应用进展,以期为RFID技术的发展提供一定的理论基础。方法阐述RFID系统的组成、分类、工作原理及该技术的优点;分析RFID技术在监测食品包装内温度、湿度、pH、气体含量等参数的应用潜力;综述RFID技术在整个食品供应链(生产、加工、储运和销售环节)中的追溯进展;讨论目前RFID技术在实际应用中面临的问题和今后的发展方向。结论通过全面综述RFID技术在智能包装、食品溯源等方面的应用,表明RFID技术在食品领域具有广泛的应用前景,这对食品质量控制具有重要的意义。

Recovery of Collided RFID Tags With Frequency Drift on Physical Layer

In a passive ultra-high frequency(UHF)radio frequency identification(RFID)system,the recovery of collided tag signals on a physical layer can enhance identification efficiency.However,frequency drift is very common in UHF RFID systems,and will have an influence on the recovery on the physical layer.To address the problem of recovery with the frequency drift,this paper adopts a radial basis function(RBF)network to separate the collision signals,and decode the signals via FM0 to recovery collided RFID tags.Numerical results show that the method in this paper has better performance of symbol error rate(SER)and separation efficiency compared to conventional methods when frequency drift occurs.

Capture-aware Bayesian RFID Tag Estimate for Large-scale Identification

Dynamic framed slotted Aloha algorithm is one of popular passive radio frequency identification(RFID) tag anticollision algorithms. In the algorithm, a frame length requires dynamical adjustment to achieve higher identification efficiency.Generally, the adjustment of the frame length is not only related to the number of tags, but also to the occurrence probability of capture effect. Existing algorithms could estimate both the number of tags and the probability of capture effect. Under large-scale RFID tag identification, however, the number of tags would be much larger than an initial frame length. In this scenario, the existing algorithm's estimation errors would substantially increase. In this paper, we propose a novel algorithm called capture-aware Bayesian estimate, which adopts Bayesian rules to accurately estimate the number and the probability simultaneously. From numerical results, the proposed algorithm adapts well to the large-scale RFID tag identification. It has lower estimation errors than the existing algorithms. Further,the identification efficiency from the proposed estimate is also higher than the existing algorithms.

Design and Implementation of a Low-Power Active RFID for Container Tracking at 2.4 GHz Frequency

In this paper a new active RFID system at 2.45 GHz based on the low-power system-on-chip CC2530 RF transceiver is designed and implemented. Only by using of an integrated multi-channel fast chip, both the MCU and RF operations are done which makes the RFID more reliable and reduces the complexity of the hardware and cost, vividly. This RFID system utilizes the Zig-Bee IEEE 802.15.4 standard in the ISM band. A lot amount of energy is restored by setting Tags in the sleep mode in the most of times. The maximum transmission range of 80 m at the output power of 4.5 dBm is obtained. The main application of this system is for the container identification with precise operation and high accuracy. An active Tag with unique ID is mounted on each vehicle. By enabling the AUTOCRC error detection possibility, minor errors are detected in the received frames. Receiver sensitivity of –97 dBm and current consumption of 1 μA in the sleep mode and 29.6 mA in the active mode are reported.

基于RFID的笼内小鼠定位跟踪系统设计

常见的定位技术用于笼内小鼠跟踪准确度不高。为提高笼内小鼠定位准确性,提出了一种基于射频识别(RFID)技术的笼内小鼠定位跟踪和行为分析系统,通过放置在饲养笼下方的RFID读写器天线阵列板实现定位跟踪,上位机软件可实时显示小鼠的活动轨迹图以便科研人员对小鼠进行行为分析。通过模拟实验和生物实验,该系统可准确定位4×6阵列中小鼠位置,定位准确率可达95%以上,其中,组成阵列的单元格尺寸仅为45 mm×45 mm。

基于RFID的人体姿态识别方法研究

人体姿态感知是未来智能护理场景的主要挑战之一。然而,视觉技术会涉及遮挡、光线条件、侵犯隐私等问题;可穿戴运动跟踪设备会增加人体负担,降低舒适性。针对以上问题,提出了一种基于射频识别(RFID)的方法进行全肢体姿态估计,能够有效克服遮挡、穿戴舒适性差等问题。首先基于相位差信息提出了一种细粒度肢体运动模型,通过构建似然函数来进行人体关节角度估计;引入正运动学构建多肢体联合运动模型,结合双天线融合算法进行三维关节角度估计;最后结合人体骨骼模型与肢体关节角度来重建人体姿态。实验结果以Kinect 2.0为标准,测得的四肢平均关节角度误差约为6°,平均关节位置误差约为4cm,表明该系统可以有效地实时监测全肢体姿态。

基于切比雪夫混沌映射和PUF的RFID三方认证协议

针对射频识别(RFID)三方认证协议存在的安全需求和资源开销的平衡问题,利用切比雪夫多项式的半群性质以及混沌性质提出了一个基于切比雪夫混沌映射和物理不可克隆函数(PUF)的RFID三方认证协议:使用切比雪夫混沌映射来实现标签、阅读器和服务器三方共享秘密;使用随机数实现协议每轮会话的新鲜性以抵抗重放攻击,同时也实现了阅读器与标签的匿名性;使用PUF函数实现标签本身的安全认证以及抵抗物理克隆攻击。安全分析表明,该协议能有效抵抗追踪、重放、物理克隆和去同步攻击等多种恶意攻击,使用BAN逻辑分析方法和Scyther工具验证了其安全性。与近期协议对比分析表明,该协议弥补了同类RFID协议的安全缺陷,在满足各种安全属性需求的同时尽量平衡硬件开销,契合了RFID硬件资源受限的处境,适用于RFID三方认证场景。

RFID技术在广播电台数字音频系统中的应用研究

射频识别(Radio Frequency Identification,RFID)技术利用电磁场自动识别和跟踪附着在物体上的标签。该技术分为被动RFID和主动RFID,前者不含电池,通过读取器提供的电磁波激活,后者则含有电池,能主动发送信号。基于此,深入探讨RFID技术在广播电台数字音频系统中的应用,包括音频跟踪、管理及自动化,并通过具体案例分析展示其优化广播运作流程的潜力。

RFID技术在通信数据安全传输中的应用研究

射频识别(Radio Frequency Identification,RFID)技术作为一种无线通信技术,通过无线电波实现数据的自动识别和跟踪,已广泛应用于商品管理、供应链管理以及门禁控制等领域。随着技术的普及和应用范围的扩大,如何借助RFID技术提升通信数据传输的安全性,防止数据泄露、篡改或非法访问,已成为一个急需解决的问题。文章主要介绍RFID技术的基本原理和不同类型的RFID系统,明确通信数据安全传输的基本要求,包括数据的完整性、机密性以及安全认证等方面。深入探讨RFID技术在通信数据安全传输中的具体应用,包括RFID系统的安全架构设计、加密算法的选择与应用以及认证过程与协议制定,通过采取相应的安全措施,有效提升RFID系统在数据传输过程中的安全性。

植入安全工器具RFID标签的无线性能测试分析

电力安全工器具植入射频识别(RFID)标签后具有无线通信、定位、感知、数据交互、工作票联动等功能。针对RFID标签植入工器具后无线通信性能将受工器具材质等因素的影响而下降开展研究:首先,分析了RFID的传输特性与主要性能指标;然后,采用HFSS电磁仿真软件建立植入工器具RFID标签的仿真模型,研究植入深度与材料的介电常数对RFID标签信号传输性能的影响;最后,搭建RFID性能测试平台,测试不同介电常数与植入深度的读取距离以及输入匹配参数和谐振频率,并对不同测试距离的信噪比和接收信号强度指示(RSSI)进行测试。研究表明,RFID标签的植入深度与材质的介电常数将影响RFID的性能,植入工器具的RFID芯片传输距离将减小。

Analysis of RFID Based Positioning Technique Using Received Signal Strength and Directional Antenna

Automatic robot navigation is being utilized in many industries for the purpose of high speed work delivery. Color follower, fix path follower robots are current solution to this activities but dynamic path configuration is not possible in these robots. Hence new system proposes effective and fully dynamic path follower robots using RFID and directional antenna. Radio Frequency Identification (RFID) system permits automatic identification of objects with RFID tags using radio waves which have been widely used in mobile robot navigation, localization and mapping both in indoor and outdoor environment. This article presents a navigation strategy for autonomous mobile robot using passive RFID system. Proposed robot system is provided with RFID tag functionality which will load tag number and direction instruction. At some turning point, user will put RF tag, this tag will be read by RF reader which is placed on robot. As per direction instruction robot will change the direction and reach to the destination. Also as per the movement, robot will send its GPS location to PC (Personal Computer) which will be displayed on PC. Hence main goal is to provide more reliable and low energy consumption based indoor positioning system which will be achieved using directional antenna.

基于反射信号特征的RFID标签和移动终端跨域互联方法

随着物联网、人工智能等技术的飞速发展,基于物联网的“人-机-物”智能感知识别技术成为当前研究的热点方向。在众多的感知识别技术中,射频识别技术(Radio Frequency Identification, RFID)作为物联网的核心技术之一,被广泛应用在物流追踪、身份认证和室内定位等各个领域。由于目前广泛使用的个人移动设备并不支持RFID信息读取,限制了RFID技术的大范围应用。针对智能手机不能直接读取RFID标签信息的问题,提出一种利用用户预定义的基于RFID反射信号的手势特征实现面向智能手机和RFID标签之间的跨域互联方法。该方法不需要对部署的RFID系统或智能手机进行任何硬件修改,通过用户在感兴趣标签面前做出手势而产生的RFID相位特征,并与智能手机捕获到的运动传感器数据的相关时间戳进行匹配,从而实现了智能手机与RFID标签的关联配对。最后,通过实验验证了文中提出的跨域互联方法的可行性。

模糊贴近度在RFID定位系统中的应用

针对LANDMARC室内定位系统的缺点,提出一种基于模糊最大最小贴近度的射频识别(RFID)室内定位系统.该定位系统将参考标签划分成四个正方形区域,先通过阅读器与定位标签的能量等级确定目标标签所属的正方形区域,再计算目标标签与该区域内的参考标签的模糊贴近度.实验表明,相比于经典的LANDMARC定位系统,该定位系统具有较好的定位精度,所提定位系统可以有效地避开不相关区域阅读器与参考标签对定位的影响.

基于RFID技术的图书馆自助服务系统设计

设计一种基于射频识别(Radio Frequency Identification,RFID)技术的图书馆自助服务系统,以提高图书馆的运作效率和用户体验,实现图书借阅、归还和定位等功能的自动化处理。采用RFID技术作为核心技术,通过将RFID标签粘贴在每本图书上,并在图书馆各个关键位置安装RFID读写器,实现对图书的无线识别和追踪。经过实际测试和数据分析得出,基于RFID技术的图书馆自助服务系统能够大幅提升图书馆的运作效率和用户体验,自助借阅和归还的速度更快,减少了等待时间。

大规模RFID系统中未知标签的快速可靠识别

未知标签的存在可能会给供应链系统、仓储管理等带来不可忽略的经济损失或安全隐患,因此未知标签的识别研究对射频识别系统意义重大。为减少冲突时隙的比例,传统协议通常需要设置较大的帧长,导致对未知标签识别效率较低,且协议中大多存在冲突时隙被直接废弃、时隙利用率低的问题。提出冲突分解法(CRM)协议,通过把大部分的冲突时隙转变为有用时隙,将没有未知标签参与的冲突时隙内已知标签灭活,对有未知标签参与的冲突时隙进行区分码的解缠绕,以提取并识别冲突时隙中的未知标签。通过优化帧长设置,提高时隙利用率,增大已知标签的灭活效率及未知标签的识别效率。实验结果表明,CRM协议对未知标签的识别效率分别可达到UTI-SBF、HUTI、PTI、FUTI协议的2.5、2.2、1.4、1.5倍。

Design and simulation of self-powered radio frequency identification (RFID) tags for mobile temperature monitoring

This paper presents a design for a self-powered radio frequency identification (RFID) tag with a thin film bulk acoustic reso- nating piezoelectric power supply (PPS), which can be used for portable remote temperature monitoring. We call this system a PPS-RFID for short. The RFID systems have been found to have many applications in the internet of things (IOT) in the past decade. But semi-active RFID tags require an onboard battery which limits their applications in many fields. For these reasons, our research focuses on power sources for the RFID tags. This paper emphasizes the circuit design and simulation of PPS. In our tests, 0.283 mW was generated by PPS at 1 Hz vibration by a 650 N impact force. The results showed that the integrated PPS could supply sufficient power for the designed PPS-RFID tag. The PPS-RFID tag can be widely used for temperature monitoring during mobile transport of perishable items such as medicines or food.

Automated Identification Algorithm Using CNN for Computer Vision in Smart Refrigerators

Machine Learning has evolved with a variety of algorithms to enable state-of-the-art computer vision applications.In particular the need for automating the process of real-time food item identification,there is a huge surge of research so as to make smarter refrigerators.According to a survey by the Food and Agriculture Organization of the United Nations(FAO),it has been found that 1.3 billion tons of food is wasted by consumers around the world due to either food spoilage or expiry and a large amount of food is wasted from homes and restaurants itself.Smart refrigerators have been very successful in playing a pivotal role in mitigating this problem of food wastage.But a major issue is the high cost of available smart refrigerators and the lack of accurate design algorithms which can help achieve computer vision in any ordinary refrigerator.To address these issues,this work proposes an automated identification algorithm for computer vision in smart refrigerators using InceptionV3 and MobileNet Convolutional Neural Network(CNN)architectures.The designed module and algorithm have been elaborated in detail and are considerably evaluated for its accuracy using test images on standard fruits and vegetable datasets.A total of eight test cases are considered with accuracy and training time as the performance metric.In the end,real-time testing results are also presented which validates the system’s performance.

面向RFID的轻量级双向认证协议

为了提高无线射频识别(RFID)系统执行身份认证的效率和解决通信双方身份隐私保护问题,提出一种新的轻量级RFID双向认证协议,该协议主要采用ECC密码算法和Hash函数。基于Hash函数、ECC密码算法与或运算,使用随机数生成器生成不可预测的消息认证码以保障双向认证时传输消息的新鲜性;通过椭圆曲线加密算法隐藏通信双方的真实身份,基于ECDLP(椭圆曲线离散对数问题)困难问题,在保证身份隐私的前提下,采用两轮消息交互的模式让通信双方相互验证新鲜的消息认证码来实现协议的双向认证;通过指定密钥种子协商出标签和服务器的共享会话密钥,并设计密钥自动更新机制以实现双方的密钥同步。与部分典型的双向认证协议进行分析对比,所提出的双向认证协议相较同类的双向认证协议最多节省近40%的计算时间和25%的存储空间,并且能够支持多种安全需求和抵抗不同的恶意攻击。