Application of Radio Frequency Identification (RFID) in Dairy Information Management

As a kind of brand-new technology, radio frequency identification management, data control and acquisition. This paper introduced food safety system construction, analyzed the advantages and problems in dairy modem suggestions for solution according to the practical situation. （RFID） plays an important role in dairy information tracing and culture function extension of managing breeding technology, and finally put forward some

Remanufacturing Closed-Loop Supply Chain Model with Radio Frequency Identification Affecting Recycling Rate

In order to construct a resource-saving and environmentfriendly society,the advantages of radio frequency identification(RFID) were considered.And it put forward the idea of introducing RFID in the recycling activities of waste products.Taking into account such elements as the technical level of RFID,cost saving from remanufacturing and the cost of RFID tags,both centralized and decentralized supply chain models with different participants in waste product collection were created,in order to determine the optimal pricing strategy and RFID technical level.In the end,sensitivity analyses were conducted to analyze the impacts of scaling parameter for additional increased recovery rate with RFID on pricing and RFID technology level,and impacts of cost saving on the profits of participants in different remanufacturing closed-loop supply chain models.

RFID Based e-quality Tracking in Service-oriented Manufacturing Execution System

The method of acquiring the real-time data has influenced the implementation of the manufacturing execution system （MES）. Accompanied with turning the MES into service-oriented manufacturing execution system （so-MES）, real-time e-quality tracking （e-QT）, in which real-time data are computed, has played more and more important roles in manufacturing. This paper presents an e-QT model through the study of real-time status data tracking and quality data collecting. An implementing architecture of the e-QT model is constructed on the basis of radio frequency identification devices （RFID） data-tracking network. In order to develop the e-QT system, some key enabling technologies, such as configuration, data collection, and data processing, etc, are studied. The relation schema between hardware is built for the RFID data-tracking network based on the configuration technique. Real-time data are sampled by using data collecting technique. Furthermore, real-time status and quality data in a shop-floor can be acquired in terms of using the real-time data computing method. Finally, a prototype system is developed and a running example is given so as to verify the feasibility of methods proposed in this paper. The proposed research provides effective e-quality tracking theoretical foundation through the use of RFID technology for the discrete manufacturing.

Recovery of Collided RFID Tags With Frequency Drift on Physical Layer

In a passive ultra-high frequency(UHF)radio frequency identification(RFID)system,the recovery of collided tag signals on a physical layer can enhance identification efficiency.However,frequency drift is very common in UHF RFID systems,and will have an influence on the recovery on the physical layer.To address the problem of recovery with the frequency drift,this paper adopts a radial basis function(RBF)network to separate the collision signals,and decode the signals via FM0 to recovery collided RFID tags.Numerical results show that the method in this paper has better performance of symbol error rate(SER)and separation efficiency compared to conventional methods when frequency drift occurs.

A Physical Layer Network Coding Based Tag Anti-Collision Algorithm for RFID System

In RFID(Radio Frequency IDentification)system,when multiple tags are in the operating range of one reader and send their information to the reader simultaneously,the signals of these tags are superimposed in the air,which results in a collision and leads to the degrading of tags identifying efficiency.To improve the multiple tags’identifying efficiency due to collision,a physical layer network coding based binary search tree algorithm(PNBA)is proposed in this paper.PNBA pushes the conflicting signal information of multiple tags into a stack,which is discarded by the traditional anti-collision algorithm.In addition,physical layer network coding is exploited by PNBA to obtain unread tag information through the decoding operation of physical layer network coding using the conflicting information in the stack.Therefore,PNBA reduces the number of interactions between reader and tags,and improves the tags identification efficiency.Theoretical analysis and simulation results using MATLAB demonstrate that PNBA reduces the number of readings,and improve RFID identification efficiency.Especially,when the number of tags to be identified is 100,the average needed reading number of PNBA is 83%lower than the basic binary search tree algorithm,43%lower than reverse binary search tree algorithm,and its reading efficiency reaches 0.93.

Automated Identification Algorithm Using CNN for Computer Vision in Smart Refrigerators

Machine Learning has evolved with a variety of algorithms to enable state-of-the-art computer vision applications.In particular the need for automating the process of real-time food item identification,there is a huge surge of research so as to make smarter refrigerators.According to a survey by the Food and Agriculture Organization of the United Nations(FAO),it has been found that 1.3 billion tons of food is wasted by consumers around the world due to either food spoilage or expiry and a large amount of food is wasted from homes and restaurants itself.Smart refrigerators have been very successful in playing a pivotal role in mitigating this problem of food wastage.But a major issue is the high cost of available smart refrigerators and the lack of accurate design algorithms which can help achieve computer vision in any ordinary refrigerator.To address these issues,this work proposes an automated identification algorithm for computer vision in smart refrigerators using InceptionV3 and MobileNet Convolutional Neural Network(CNN)architectures.The designed module and algorithm have been elaborated in detail and are considerably evaluated for its accuracy using test images on standard fruits and vegetable datasets.A total of eight test cases are considered with accuracy and training time as the performance metric.In the end,real-time testing results are also presented which validates the system’s performance.

Capture-aware Bayesian RFID Tag Estimate for Large-scale Identification

Dynamic framed slotted Aloha algorithm is one of popular passive radio frequency identification(RFID) tag anticollision algorithms. In the algorithm, a frame length requires dynamical adjustment to achieve higher identification efficiency.Generally, the adjustment of the frame length is not only related to the number of tags, but also to the occurrence probability of capture effect. Existing algorithms could estimate both the number of tags and the probability of capture effect. Under large-scale RFID tag identification, however, the number of tags would be much larger than an initial frame length. In this scenario, the existing algorithm's estimation errors would substantially increase. In this paper, we propose a novel algorithm called capture-aware Bayesian estimate, which adopts Bayesian rules to accurately estimate the number and the probability simultaneously. From numerical results, the proposed algorithm adapts well to the large-scale RFID tag identification. It has lower estimation errors than the existing algorithms. Further,the identification efficiency from the proposed estimate is also higher than the existing algorithms.

Prototype for Integrating Internet of Things and Emergency Service in an IP Multimedia Subsystem for Wireless Body Area Networks

In recent years, the application of the Internet of Things （IoT） has become an emerging business. The most important concept of next-generation network for providing a common global IT platform is combining seamless networks and networked things, objects or sensors. Also, wireless body area networks （WBANs） are becoming mature with the widespread usage of the IoT. In order to support WBAN, the platform, scenario and emergency service are necessary due to the sensors in WBAN being related to wearer＆#39;s life. The sensors on the body detect a lot of information about bioinformatics and medical signals, such as heartbeat and blood. Thus, the integration of IoT and network communication in daily life is important. However, there is not only a lack of common fabric for integrating IoT with current Internet and but also no emergency call process in the current network communication envi-ronment. To overcome such situations, the prototype of integrating IoT and emergency call process is discussed. A simulated boot-strap platform to provide the discussion of open challenges and solutions for deploying IoT in Internet and the emergency commu-nication system are analyzed by using a service of 3GPP IP multimedia subsystem. Finally, the prototype for supporting WBAN with emergence service is also addressed and the performance results are useful to service providers and network operators that they can estimate their migration to IoT by referring to this experience and experiment results. Furthermore, the queuing model used to achieve the performance of emergency service in IMS and the delay time of the proposed model is analyzed.

Prefix Subsection Matching Binary Algorithm in Passive RFID System

Identifying speed,tag average response times and reliability are the most important capabilities in passive RFID(radio frequency identification) system.QT(query tree) is a famous algorithm for lowest-cost RFID tags,but its shortcoming is high searching delay and high tag average response times.A prefix subsection matching binary(PSMB) algorithm based on QTalgorithm is proposed.The key idea of PSMB anti-collision algorithm is that,during searching phase,a given reader uses the particular tags ID,which has been searched out formerly,to shorten searching delay and depress tag average response times.The idea of PSMB algorithm can be described as follows.Usually,tag ID is composed of several subsections which have different meanings.Based on the tags ID searched out formerly,a given reader builds a prefix database.In subsequent searching phase,the reader uses its prefix database to deduce searching space of tag ID.Simulation results show that identification delay of PSMB algorithm is about 1/3 of QTalgorithm,tag average response times is about 1/4 of QTalgorithm,and system throughput rate is treble QTalgorithm.

Identifying the Unknown Tags in a Large RFID System

Radio frequency identification(RFID) technology has been extensively used in various practical applications, such as inventory management and logistics control, with its outstanding features(e.g. non-line-ofsight reading and fast identification). And in a large RFID system, unknown tag identification uses total execution time as the performance criterion. However, the performance of existing protocols in terms of execution time is not ideal. To get better time efficiency, a novel unknown tag identification protocol(NUTIP) is proposed. The novelty of NUTIP is demonstrated mainly in two aspects: i) NUTIP deactivates some known tags and identifies or labels some unknown tags during its first phase to prevent these tags from interfering unknown tag identification. ii) We optimize the parameter settings to minimize the total execution time. Simulation experiments show that the proposed protocol is far superior to other relevant protocols and suitable for both sparse unknown tags environment and dense unknown tags environment.

Application of PRO-ESPRIT algorithm in identification of surface acoustic wave identification-tags

The surface acoustic wave （SAW） identification （ID）-tags have great potential for application in radio frequency identification （RFID） due to their characteristics of wireless sensing and passive operation. In the measurements based on the frequency domain sampling （FDS）, to expand the range of detection and allow the system work in harsh environments, it is necessary to enhance the identification capability at low SNR. In addition, to identify the tags in real time, it is important to reduce identification time. Therefore, estimation of signal parameters based on the Procrustes rotations via the rotational invariance technique （PRO-ESPRIT） is adopted. Experimental results show that good identification capability is achieved with a relatively faster measurement speed.

Verification of RFID System Usability in Silage Bale Life Cycle Management

Digitalization has nowadays raised interest in variable applications of farming.Increase of knowledge level,by means of unique identification,automation and control,farmers gain relevant business profit.This research is focused on the utilization of passive radio frequency identification(RFID)technology in silage bale application,both manual and automated level.Challenges arise due to silage conservation,varying environmental and seasonal conditions,different identification environments and RFID operation principle.Further maximum communication signal strength is limited by telecommunication standard regulations(e.g.,ETSI).The applicability of RFID technology with different commercial passive transponders is measured manually in a silage bale of 160 cm in diameter,covering 360 degrees around the bale.In addition,automated field tests are conducted in a real environment,where the data collection system is appended to a tractor and RFID reader antenna in a baler.Manual measurements are conducted as identification distance(meters)and transponder population(number of tags),while automated measurements are based on the number of successfully identified silage bales.Based on the manual measurement results,the most suitable tags for the automated field measurements were chosen,and the applicability to silage bale identification was verified.Field tests showed 100%success,with 151/151 uniquely identified silage bales.Achieved results prove that passive RFID operates well enough in silage bale identification,further enabling the development of digitalization of silage bale life cycle.

Analysis of Geo Positioning System Using RF &DA

Indoor positioning systems (IPSs) have been intended to provide position information of persons and devices. Higher user percentage of handheld devices such as tablets or mobile phones had led to the development of a number of indoor positioning systems. In this research a work on a real time portable RFID indoor positioning device such as on smartphone will be performed. The personal networks will be designed to meet the users’ needs and interconnect users’ devices equipped with different communications technologies in various places to form one network for better result. Radio frequency identification (RFID) with directional antenna has proved its potential for locating objects in indoor environment. Hence, the proposed device idea will be used to exploit various unknown locations in an indoor environment such as college campus;this interpretation will rely on Wireless LAN, Received Signal Strength values from Access Points (AP) in specific mentioned arenas;these APs will be monitored constantly by RFID with directional antenna (DA) and handheld devices. For obtaining the better results from existing devices, algorithms of Range Estimation are proposed, which can be used on various handheld devices for locating indoor objects.

Bi-slotted Binary Tree Algorithm with Stack for Radio Frequency Identification Tag Anti-Collision

A radio frequency identification (RFID) reader will fail to identify tags if a collision occurs. This paper proposes a bi-slotted binary tree algorithm (BSBTA) with stack for RFID tag anti-collision to improve the performance of binary tree algorithm (BTA). In BSBTA, the reader detects collisions by Manchester code and stores colliding prefixes in a stack. The query is composed of a two-bit prefix and an index value. Following every reader query, there are two timeslots for tags whose pointers and identities (IDs) match the query to respond, one for the tag whose next bit is 0 and the other for the tag with 1 as its next bit. Performance analysis and evaluation are also given. The time complexity and the communication complexity of BTA and BSBTA are derived. The simulation results compare the performance of BSBTA with several related anti-collision algorithms. It is shown that BSBTA outperforms BTA in terms of the average number of responded bits and timeslots for one tag identification.

Integration of Radio-Frequency Identification and 4D CAD in Construction Management

In order to increase the productivity of construction industry, emerging technologies have been constantly introduced and applied in this traditional industry by pilot researchers. This paper provides an integrated model of radio-frequency identification (RFID) and four-dimensional Computer-Aided Design (4D CAD) in construction management. RFID involves the use of tags that collect data and transmit data. RFID can collect data by radio waves instead of light waves. RFID technology is surpassing barcode technology where light waves are easily blocked and barcode labels are easy to fall off or become unreadable due to dust, dirt, or other contaminants. 4D CAD which involves 3D construction models and construction schedules presents visualized construction process. Integration of RFID and 4D CAD in this paper built a dynamic construction management and control system which would reduce the time of capturing data on site and control quality of construction materials efficiently. Pilot test result shows that a construction manager can easily understand how and what a complicated construction project will be accomplished. Although further analysis is necessary, RFID and 4D CAD show promises of being a beneficial technology in construction management.

An Analysis of Near Field and Application of a New Comb-shaped Antenna for Radio Frequency Identification

A new comb shaped antenna for radio frequency identification is proposed. The kind of antenna can replace some antenna array. So it is very convenient for omnidirectional identification. The test result proves this antenna is viable.

A Low-Cost Smart Office Design Framework Using Arduino

The main motive of our research work is security enhancement and light energy conservation. This paper describes a study investigating the potential of a controlled office solution by integrating the Internet of Things (IoT) with wireless sensor networks (WSNs). A prototype of a smart office is developed using a global system of mobile Bluetooth and Radio Frequency Identification (RFID) technology. The user can turn on and off the fan remotely at any time. This prototype focuses on security and provides human-friendly assistance when in or out of the Office by integrating a mobile application platform. The innovative automated smart Office is designed with intelligent Security doors, lights, alarms, temperature humidifiers, and bright Liquid Crystal Display (LCD) screens for viewing. Our study has opened up virtual possibilities for producing cheap innovative frameworks in this Generation of IoT and the fifth Generation (5G) technology. Therefore, when implemented, this innovation will ease and improve human quality of life. So, this paper aims to provide a low-cost, effective Internet of the things-based automated smart Office.

Comments on Enhanced Yoking Proof Protocols for Radio Frequency Identification Tags and Tag Groups

A radio frequency identification (RFID) yoking proof scheme can generate proofs of simultaneous presence of two tags in the range of a specified reader so that an off-line verifier can verify the proofs later. This proof has found several interesting applications. However, many existing RFID yoking schemes are vulnerable to replay attacks. To overcome the weaknesses, Cho et al. proposed a new RFID yoking proof protocol and a new grouping protocol. Unfortunately, Cho et al.'s schemes are still vulnerable to replay attacks. In this paper, in addition to demonstrating weaknesses, we further discuss the rationale behind these weaknesses to provide a guide line for designing secure RFID yoking schemes. Based on the guide line, we propose a new RFID yoking scheme and a new RFID grouping scheme. Performance evaluation shows that our scheme outperforms its counterparts.

Toward an SCA-OSGi based Middleware for Radio Frequency Identification Applications

The radio frequency identification (RFID) technology progressing is becoming a increasing interest in several application areas. To accommodate diverse and changing requirements from applications,RFID middleware should be reconfigurable. However,current RFID middleware is limited in its ability to support reconfiguration. To solve this problem,we adopt the service-oriented component-based approach in building the middleware. Component-based design enables decomposition of middleware functionality and is easier than the current one to manage and modify the structure of the middleware both statically and dynamically. Applying service-oriented architecture (SOA) can further reduce the coupling between components and external software and ease the integration between middleware and applications. We propose a two-layered service component architecture (SCA) open service gateway initiative (OSGi) component model so as to enable reconfigurability. Based on the proposed component model,we build a standard-based RFID middleware-SCA-OSGi based RFID middleware (SORM) which supports flexible deployment topologies and reconfigurability. The design and implementation details of SORM are illustrated.

A Novel Anti-Collision Algorithm for Large Scale of UHF RFID Tags Access Systems

When the radio frequency identification(RFID)system inventories multiple tags,the recognition rate will be seriously affected due to collisions.Based on the existing dynamic frame slotted Aloha(DFSA)algorithm,a sub-frame observation and cyclic redundancy check(CRC)grouping combined dynamic framed slotted Aloha(SUBF-CGDFSA)algorithm is proposed.The algorithm combines the precise estimation method of the quantity of large-scale tags,the large-scale tags grouping mechanism based on CRC pseudo-randomcharacteristics,and the Aloha anti-collision optimization mechanism based on sub-frame observation.By grouping tags and sequentially identifying themwithin subframes,it accurately estimates the number of remaining tags and optimizes frame length accordingly to improve efficiency in large-scale RFID systems.Simulation outcomes demonstrate that this proposed algorithmcan effectively break through the system throughput bottleneck of 36.8%,which is up to 30%higher than the existing DFSA standard scheme,and has more significant advantages,which is suitable for application in largescale RFID tags scenarios.