Objective:This study evaluates the reliability of smartphone compass software in measuring the cervical range of motion in healthy people.Methods:We selected 40 healthy intern college students from Tianjin Hospital fr...Objective:This study evaluates the reliability of smartphone compass software in measuring the cervical range of motion in healthy people.Methods:We selected 40 healthy intern college students from Tianjin Hospital from June to August 2022 to participate in this study.Two physiotherapists used a smartphone(iPhone 11256 Gb(model A2223))compass software to measure six directions of motion of the cervical spine in 40 subjects in a total of 3 rounds each.The intraclass correlation coefficient was used to compare the reliability intra-group,and the Pearson correlation coefficient was also used to compare the correlation between groups,with P<0.05 being statistically significant.Results:The intraclass correlation coefficient showed good reliability(>0.5)in cervical range of motion(CROM),especially in cervical flexion and right rotation(>0.9).In the correlation comparison between the two groups,the Spearman comparison was used,and the six directions of the cervical spine were significantly correlated(P<0.05).Conclusion:The built-in compass software in smartphones has good reliability in measuring CROM in healthy people.展开更多
Objective： To observe the tested results of the segmental range of motion （ROM） of lumbar spine by charge couple device （CCD）-based system for 3-dimensional real-time positioning （CCD system）, and to analyze it...Objective： To observe the tested results of the segmental range of motion （ROM） of lumbar spine by charge couple device （CCD）-based system for 3-dimensional real-time positioning （CCD system）, and to analyze its clinical significance. Methods： Seven patients with lumbar joint dysfunction and 8 healthy subjects were tested twice by the CCD-based system with an interval of 10 min. Results： The ROM of the patients was obviously lesser than that of the healthy subjects. The measuring data of segmental ROM of lumbar spine by CCD system is correlated significantly to the same data checked later on the same subjects in every direction of the movements. The differences between two checks are usually less than 1 degree. Conclusion： Specially designed CCD based system for 3-dimensional real-time positioning could objectively reflect the segmental ROM of lumbar spine. The system would be of great clinical significance in the assessment of the biomechanical dysfunction of lumbar spine and the effect of the treatment applied.展开更多
Background: Multiple level anterior cervical discectomy and fusion (ACDF) is indicated for those who suffer from multilevel stenosis or compression of the spinal canal. It was reported that this intervention would unf...Background: Multiple level anterior cervical discectomy and fusion (ACDF) is indicated for those who suffer from multilevel stenosis or compression of the spinal canal. It was reported that this intervention would unfortunately lead to a loss of normal cervical range of motion (CROM). Although, fewer studies have demonstrated the exact impact of the procedure on CROM. In our study, short and midterm postoperative CROM was described. Methods: Ninety patients who underwent ACDF were followed up postoperatively for at least 3 months. Active CROM was measured in all patients preoperatively and in postoperative follow-ups by cervical spine X-rays in lateral dynamic view using Cobb’s angle method. Results: Unfortunately, postoperative CROM was significantly diminished. At the short-term (3 months) follow-up there was a great limitation in CROM. While an obvious increase in CROM at the midterm (6 months) follow-up was observed in flexion especially. The reduction in global ROM (calculated as preoperative global ROM – 6 months postoperative ROM) was 4.1 and the reduction rate (calculated as reduction ROM divided by preoperative ROM) was 9.5%. The recovery ROM (calculated as 6 months postoperative ROM – 1 month postoperative ROM) was 8.2. The recovery rate (calculated as recovery ROM divided by 1 month postoperative ROM) was 26.5%. Conclusion: Active CROM following multiple level ACDF was obviously diminished. The most affected motion after surgery was flexion. It was noticed that at the short-term follow-up CROM would be more limited while after further follow up CROM was obviously improved even in neck flexion motion.展开更多
Background: Infants with congenital muscular torticollis are born with an asymmetric range of motion and a muscular imbalance in the cervical spine, as a result of a shortening or excessive contraction of the sternocl...Background: Infants with congenital muscular torticollis are born with an asymmetric range of motion and a muscular imbalance in the cervical spine, as a result of a shortening or excessive contraction of the sternocleidomastoid muscle. Purpose: The study aimed to investigate passive range of motion (PROM) for rotation and lateral flexion, and muscle function of the cervical spine in children that had a history of CMT as infants. Study design: a prospective cohort study. Patient sample: 58 children at the age of 3.5 to 5 years that had been treated for CMT have infants participated in the study. Method: PROM was measured with protractors and muscle function was estimated with a modified Muscle Function Scale. Data from infancy were taken from earlier records. Result: PROM in rotation of the neck was mean 98.7° and PROM in lateral flexion of the neck was mean 69.1°. Symmetric PROM of the neck was found in 74% of the children for rotation and in 88% of the children for lateral flexion. Multiple regression showed that gender and PROM in rotation as infants had a significant impact on asymmetric PROM. Forty-five percent of the children had some degree of muscular imbalance in the lateral flexors of the neck. Conclusion: Possible risk factors for later asymmetric PROM are: gender, birth weight, gestation week and PROM in rotation as infants. These factors ought to be taken into consideration when developing guidelines for long-term follow-up.展开更多
BACKGROUND Dynamic cervical implant(DCI)stabilization has been reported to have satisfactory clinical and radiological results with short-and mid-term follow-up in the treatment of cervical degenerative disc disease.H...BACKGROUND Dynamic cervical implant(DCI)stabilization has been reported to have satisfactory clinical and radiological results with short-and mid-term follow-up in the treatment of cervical degenerative disc disease.However,few reports about the clinical and radiological outcome with more than 5-year follow-up exist.AIM To investigate the long-term clinical and radiological results of DCI arthroplasty.METHODS A total of 40 patients who received DCI arthroplasty were consecutively reviewed from May 2010 to August 2015.Visual analogue scale(VAS),neck disability index(NDI)score,Japanese Orthopaedic Association(JOA)score,and SF-36 items were used to assess neural function rehabilitation.Static and dynamic radiographs and 3-dimentional computed tomography were used to evaluate the radiological outcomes.RESULTS The scores of neck/arm VAS,NDI,JOA,and 8-dimensions of SF-36 were significantly improved at the 1-mo follow-up(P<0.05)and maintained until the last follow-up(P<0.05).The range of motion(ROM)of C2-C7,functional spinal unit(FSU),upper/lower adjacent level,C2-C7 lateral bending,and FSU lateral bending decreased at the 1-mo follow-up(P<0.05),whereas they increased to the preoperative level at the later follow-up intervals(P>0.05),except the ROM of FSU lateral bending(P<0.05).The C2-C7 alignment and FSU angle kept more lordotic at the last follow-up(P<0.05).The intervertebral height increased significantly at the 1-mo follow-up(P<0.05)and decreased at later follow-ups(P>0.05).At the last follow-up,12(26.1%)segments developed heterotopic ossification.CONCLUSION DCI arthroplasty is a safe and effective non-fusion technique to treat cervical degenerative disc disease in long-term follow-up.展开更多
As the elderly population continues to grow, the number of patients with low back pain is gradually increasing. Among them, Lumbar Degenerative Diseases (LDD) is one of the major contributors to low back pain. Biomech...As the elderly population continues to grow, the number of patients with low back pain is gradually increasing. Among them, Lumbar Degenerative Diseases (LDD) is one of the major contributors to low back pain. Biomechanical in vivo studies of the lumbar spine are mainly performed by implants or imaging data to record the real-time changes of form and stress on the intervertebral disc during motion. However, the current developments are slow due to the technological and ethical limitations. In vitro experiments include animal experiments and cadaver experiments, which are difficult to operate or differ greatly from normal human structures, and the results still need to be verified repeatedly to test their accuracy. As for finite element method, it is relatively low cost and can repeat the experimental results. Therefore, we believe that finite element analysis plays an extremely important role in biomechanical research, especially in analyzing the relationship between different surgical models and the degeneration caused by different mechanics.展开更多
文摘Objective:This study evaluates the reliability of smartphone compass software in measuring the cervical range of motion in healthy people.Methods:We selected 40 healthy intern college students from Tianjin Hospital from June to August 2022 to participate in this study.Two physiotherapists used a smartphone(iPhone 11256 Gb(model A2223))compass software to measure six directions of motion of the cervical spine in 40 subjects in a total of 3 rounds each.The intraclass correlation coefficient was used to compare the reliability intra-group,and the Pearson correlation coefficient was also used to compare the correlation between groups,with P<0.05 being statistically significant.Results:The intraclass correlation coefficient showed good reliability(>0.5)in cervical range of motion(CROM),especially in cervical flexion and right rotation(>0.9).In the correlation comparison between the two groups,the Spearman comparison was used,and the six directions of the cervical spine were significantly correlated(P<0.05).Conclusion:The built-in compass software in smartphones has good reliability in measuring CROM in healthy people.
文摘Objective： To observe the tested results of the segmental range of motion （ROM） of lumbar spine by charge couple device （CCD）-based system for 3-dimensional real-time positioning （CCD system）, and to analyze its clinical significance. Methods： Seven patients with lumbar joint dysfunction and 8 healthy subjects were tested twice by the CCD-based system with an interval of 10 min. Results： The ROM of the patients was obviously lesser than that of the healthy subjects. The measuring data of segmental ROM of lumbar spine by CCD system is correlated significantly to the same data checked later on the same subjects in every direction of the movements. The differences between two checks are usually less than 1 degree. Conclusion： Specially designed CCD based system for 3-dimensional real-time positioning could objectively reflect the segmental ROM of lumbar spine. The system would be of great clinical significance in the assessment of the biomechanical dysfunction of lumbar spine and the effect of the treatment applied.
文摘Background: Multiple level anterior cervical discectomy and fusion (ACDF) is indicated for those who suffer from multilevel stenosis or compression of the spinal canal. It was reported that this intervention would unfortunately lead to a loss of normal cervical range of motion (CROM). Although, fewer studies have demonstrated the exact impact of the procedure on CROM. In our study, short and midterm postoperative CROM was described. Methods: Ninety patients who underwent ACDF were followed up postoperatively for at least 3 months. Active CROM was measured in all patients preoperatively and in postoperative follow-ups by cervical spine X-rays in lateral dynamic view using Cobb’s angle method. Results: Unfortunately, postoperative CROM was significantly diminished. At the short-term (3 months) follow-up there was a great limitation in CROM. While an obvious increase in CROM at the midterm (6 months) follow-up was observed in flexion especially. The reduction in global ROM (calculated as preoperative global ROM – 6 months postoperative ROM) was 4.1 and the reduction rate (calculated as reduction ROM divided by preoperative ROM) was 9.5%. The recovery ROM (calculated as 6 months postoperative ROM – 1 month postoperative ROM) was 8.2. The recovery rate (calculated as recovery ROM divided by 1 month postoperative ROM) was 26.5%. Conclusion: Active CROM following multiple level ACDF was obviously diminished. The most affected motion after surgery was flexion. It was noticed that at the short-term follow-up CROM would be more limited while after further follow up CROM was obviously improved even in neck flexion motion.
文摘Background: Infants with congenital muscular torticollis are born with an asymmetric range of motion and a muscular imbalance in the cervical spine, as a result of a shortening or excessive contraction of the sternocleidomastoid muscle. Purpose: The study aimed to investigate passive range of motion (PROM) for rotation and lateral flexion, and muscle function of the cervical spine in children that had a history of CMT as infants. Study design: a prospective cohort study. Patient sample: 58 children at the age of 3.5 to 5 years that had been treated for CMT have infants participated in the study. Method: PROM was measured with protractors and muscle function was estimated with a modified Muscle Function Scale. Data from infancy were taken from earlier records. Result: PROM in rotation of the neck was mean 98.7° and PROM in lateral flexion of the neck was mean 69.1°. Symmetric PROM of the neck was found in 74% of the children for rotation and in 88% of the children for lateral flexion. Multiple regression showed that gender and PROM in rotation as infants had a significant impact on asymmetric PROM. Forty-five percent of the children had some degree of muscular imbalance in the lateral flexors of the neck. Conclusion: Possible risk factors for later asymmetric PROM are: gender, birth weight, gestation week and PROM in rotation as infants. These factors ought to be taken into consideration when developing guidelines for long-term follow-up.
文摘BACKGROUND Dynamic cervical implant(DCI)stabilization has been reported to have satisfactory clinical and radiological results with short-and mid-term follow-up in the treatment of cervical degenerative disc disease.However,few reports about the clinical and radiological outcome with more than 5-year follow-up exist.AIM To investigate the long-term clinical and radiological results of DCI arthroplasty.METHODS A total of 40 patients who received DCI arthroplasty were consecutively reviewed from May 2010 to August 2015.Visual analogue scale(VAS),neck disability index(NDI)score,Japanese Orthopaedic Association(JOA)score,and SF-36 items were used to assess neural function rehabilitation.Static and dynamic radiographs and 3-dimentional computed tomography were used to evaluate the radiological outcomes.RESULTS The scores of neck/arm VAS,NDI,JOA,and 8-dimensions of SF-36 were significantly improved at the 1-mo follow-up(P<0.05)and maintained until the last follow-up(P<0.05).The range of motion(ROM)of C2-C7,functional spinal unit(FSU),upper/lower adjacent level,C2-C7 lateral bending,and FSU lateral bending decreased at the 1-mo follow-up(P<0.05),whereas they increased to the preoperative level at the later follow-up intervals(P>0.05),except the ROM of FSU lateral bending(P<0.05).The C2-C7 alignment and FSU angle kept more lordotic at the last follow-up(P<0.05).The intervertebral height increased significantly at the 1-mo follow-up(P<0.05)and decreased at later follow-ups(P>0.05).At the last follow-up,12(26.1%)segments developed heterotopic ossification.CONCLUSION DCI arthroplasty is a safe and effective non-fusion technique to treat cervical degenerative disc disease in long-term follow-up.
文摘As the elderly population continues to grow, the number of patients with low back pain is gradually increasing. Among them, Lumbar Degenerative Diseases (LDD) is one of the major contributors to low back pain. Biomechanical in vivo studies of the lumbar spine are mainly performed by implants or imaging data to record the real-time changes of form and stress on the intervertebral disc during motion. However, the current developments are slow due to the technological and ethical limitations. In vitro experiments include animal experiments and cadaver experiments, which are difficult to operate or differ greatly from normal human structures, and the results still need to be verified repeatedly to test their accuracy. As for finite element method, it is relatively low cost and can repeat the experimental results. Therefore, we believe that finite element analysis plays an extremely important role in biomechanical research, especially in analyzing the relationship between different surgical models and the degeneration caused by different mechanics.
