Colloidal gels made of oppositely charged nanoparticles are a novel class of hydrogels and can exhibit pseudoplastic behavior which will enable them to mold easily into specific shapes.These moldable gels can be used ...Colloidal gels made of oppositely charged nanoparticles are a novel class of hydrogels and can exhibit pseudoplastic behavior which will enable them to mold easily into specific shapes.These moldable gels can be used as building blocks to self-assemble into integral scaffolds from bottom to up through electrostatic forces.However,they are too weak to maintain scaffold morphology just depending on interparticle interactions such as Van der Waals attraction and electrostatic forces especially for bone tissue engineering.In this study,oppositely charged gelatin nanoparticles were firstly prepared by two-step desolvation method,followed by the mixture with water to form colloid gels.To solve the problem of weak mechanical performance of colloid gels, gelatin macromolecules were introduced into the prepared gels to form blend gels.The blend gels can be easily processed into three-dimensional( 3D) porous scaffolds via motor assisted microsyringe( MAM)system,a nozzle-based rapid prototyping technology,under mild conditions.After fabrication the scaffolds were crosslinked by glutaraldehyde( GA,25% solution in water by weight),then the crosslinked gelatin macromolecules network could form to improve the mechanical properties of colloid gels.The average particle size and zeta potential of gelatin nanoparticles were measured by NanoZS instrument.The morphology and microstructures of scaffolds were characterized by macroscopic images.The mechanical properties of the scaffolds were studied by a universal material testing machine.展开更多
In the modern medicine field, the transplant of organ and tissue is a big problem due to serious shortage of donor organ. Artificial organ and tissue is one of solutions. With the development of science, various tissu...In the modern medicine field, the transplant of organ and tissue is a big problem due to serious shortage of donor organ. Artificial organ and tissue is one of solutions. With the development of science, various tissue manufacture techniques emerged. Hereinto, due to its versatility both in materials and structure, rapid prototyping technology has become one of the important methods for tissue engineering scaffold fabrication in this field.展开更多
Purpose: Selective laser sintering (SLS) is a rapid pro- totyping technique applied to produce tissue-engineer- ing scaffolds from powder materials. The standard scanning technique, however, often produces struts of e...Purpose: Selective laser sintering (SLS) is a rapid pro- totyping technique applied to produce tissue-engineer- ing scaffolds from powder materials. The standard scanning technique, however, often produces struts of extensive thickness, which means fabrication of high- ly porous scaffolds with small overall dimensions is quite difficult. Nevertheless, this study aims to overcome this shortfall. Design/methodology/approach: To this end, three scanning methods were evaluated in terms of minimum feature size and freedom of design, using a test polyamide (PA) material. Polycaprolactone (PCL) was then employed to create highly porous 3D scaffolds using the preferred scanning me- thod to produce thin struts. Findings: While in normal scanning mode some features were well above the laser spot diameter, strut thicknesses below the laser spot diameter were achieved when using the “outline scan” function for PA material. Those achieved for PCL were slightly higher and in the 500-800 ?m range, with an average pore size of 400 μm. Investigations on the properties of the scaffolds revealed an effective compression modulus of the PCL scaffold of 6.5 MPa. Furthermore, there was no change in physical or che- mical properties when the scaffolds were stored in a physiological environment for 7 weeks. Originality/ value: Though SLS is considered as a fabrication te- chnique for tissue engineering scaffolds, actually pro- duced scaffolds did not comply with porosity requirements and limitations of the SLS process in produ- cing features at the size of the laser beam spot have not been discussed. The present paper shows the capabilities of the SLS process based on two materials and presents a method to minimize feature size in scaffolds.展开更多
A novel method of designing and preparing bone tissue engineering scaffolds with controllable porous structure of both macro channels and micro pores was proposed. The CAD software UG NX3.0 was used to design the macr...A novel method of designing and preparing bone tissue engineering scaffolds with controllable porous structure of both macro channels and micro pores was proposed. The CAD software UG NX3.0 was used to design the macro channels＇ shape, size and distribution. By integrating rapid prototyping and traditional porogen technique, the macro channels and micro pores were formed respectively. The size, shape and quantity of micro pores were controlled by porogen particulates. The sintered β-TCP porous scaffolds possessed connective macro channels of approximately 500 μm and micro pores of 200-400 μm. The porosity and connectivity of micro pores became higher with the increase of porogen ratio, while the mechanical properties weakened. The average porosity and compressive strength offl-TCP scaffolds prepared with porogen ratio of 60wt% were 78.12% and 0.2983 MPa, respectively. The cells＇ adhesion ratio of scaffolds was 67.43%. The ALP activity, OCN content and cells micro morphology indicated that cells grew and proliferated well on the scaffolds.展开更多
Biomaterials,β-TCP (β-tricalcium phosphate),and polymeric blends were used on a selective laser sintering (SLS) system,a kind of rapid prototyping machine,to produce some scaffold specimens which were designed with ...Biomaterials,β-TCP (β-tricalcium phosphate),and polymeric blends were used on a selective laser sintering (SLS) system,a kind of rapid prototyping machine,to produce some scaffold specimens which were designed with CAD (Computer Aided Design) software according to bone tissue engineering scaffold characteristics and properties. The scaffolds were produced with a pore size 800μm,and regular geometrical cylinder or sphere pores,depending on the processing. Then the specimens were treated by high temperature to assess their suitability on SLS processing. Their microstructures which had been investigated by scanning electron microscopy (SEM) exhibited fully interconnected pore which had a range size 500-800μm. X-ray diffraction analysis performed after high temperature treatment showed that β-TCP did not change. The porosity checked was about 71.29%. And the treated scaffolds could be provided an inter-connective network for the circulation of tissue fluid and hence sped up osteogenesis.展开更多
A growing number of three-dimensional(3D)-print- ing processes have been applied to tissue engineering. This paper presents a state-of-the-art study of 3D-printing technologies for tissue-engineering applications, wit...A growing number of three-dimensional(3D)-print- ing processes have been applied to tissue engineering. This paper presents a state-of-the-art study of 3D-printing technologies for tissue-engineering applications, with particular focus on the development of a computer-aided scaffold design system; the direct 3D printing of functionally graded scaffolds; the modeling of selective laser sintering(SLS) and fused deposition modeling(FDM) processes; the indirect additive manufacturing of scaffolds, with both micro and macro features; the development of a bioreactor; and 3D/4D bioprinting. Technological limitations will be discussed so as to highlight the possibility of future improvements for new 3D-printing methodologies for tissue engineering.展开更多
Bone defects arising from a variety of reasons cannot be treated effectively without bone tissue reconstruction.Autografts and allografts have been used in clinical application for some time,but they have disadvantage...Bone defects arising from a variety of reasons cannot be treated effectively without bone tissue reconstruction.Autografts and allografts have been used in clinical application for some time,but they have disadvantages.With the inherent drawback in the precision and reproducibility of conventional scaffold fabrication techniques,the results of bone surgery may not be ideal.This is despite the introduction of bone tissue engineering which provides a powerful approach for bone repair.Rapid prototyping technologies have emerged as an alternative and have been widely used in bone tissue engineering,enhancing bone tissue regeneration in terms of mechanical strength,pore geometry,and bioactive factors,and overcoming some of the disadvantages of conventional technologies.This review focuses on the basic principles and characteristics of various fabrication technologies,such as stereolithography,selective laser sintering,and fused deposition modeling,and reviews the application of rapid prototyping techniques to scaffolds for bone tissue engineering.In the near future,the use of scaffolds for bone tissue engineering prepared by rapid prototyping technology might be an effective therapeutic strategy for bone defects.展开更多
A new Precision Extrusion nozzle based ball screw transmission was developed. 3D hierarchical porous PLLA/nano-Hydroxyapatite（PLLA/nHA） scaffolds were fabricated by low-temperature deposition manufacturing. Scaffold...A new Precision Extrusion nozzle based ball screw transmission was developed. 3D hierarchical porous PLLA/nano-Hydroxyapatite（PLLA/nHA） scaffolds were fabricated by low-temperature deposition manufacturing. Scaffolds with macropores of 200-500 rtm and micropores about 10 pm were fabricated through a thorough study and control of the processing parameters, in which the processing path and speed of material extrusion determine the macropores and there is a suitable temperature zone for fabricating qualified macropores. Micropore morphology can be controlled by adjusting supercooling of solvent crystallization or adding water into the solvent system. The compressive modulus of the scaffolds in air and phosphate buffer solution was measured, which increased with HA addition. In-vitro cell culture results showed a ~ood biocomoatibilitv of PLLA/HA scaffolds with the ore-osteoblastic MC3T3-E1 cells.展开更多
基金National Natural Science Foundations of China(Nos.30973105,31271035)Science and Technology Commission of Shanghai Municipality,China(No.11nm0506200)Ph.D.Programs Foundation of Ministry of Education of China(No.20130075110005)
文摘Colloidal gels made of oppositely charged nanoparticles are a novel class of hydrogels and can exhibit pseudoplastic behavior which will enable them to mold easily into specific shapes.These moldable gels can be used as building blocks to self-assemble into integral scaffolds from bottom to up through electrostatic forces.However,they are too weak to maintain scaffold morphology just depending on interparticle interactions such as Van der Waals attraction and electrostatic forces especially for bone tissue engineering.In this study,oppositely charged gelatin nanoparticles were firstly prepared by two-step desolvation method,followed by the mixture with water to form colloid gels.To solve the problem of weak mechanical performance of colloid gels, gelatin macromolecules were introduced into the prepared gels to form blend gels.The blend gels can be easily processed into three-dimensional( 3D) porous scaffolds via motor assisted microsyringe( MAM)system,a nozzle-based rapid prototyping technology,under mild conditions.After fabrication the scaffolds were crosslinked by glutaraldehyde( GA,25% solution in water by weight),then the crosslinked gelatin macromolecules network could form to improve the mechanical properties of colloid gels.The average particle size and zeta potential of gelatin nanoparticles were measured by NanoZS instrument.The morphology and microstructures of scaffolds were characterized by macroscopic images.The mechanical properties of the scaffolds were studied by a universal material testing machine.
文摘In the modern medicine field, the transplant of organ and tissue is a big problem due to serious shortage of donor organ. Artificial organ and tissue is one of solutions. With the development of science, various tissue manufacture techniques emerged. Hereinto, due to its versatility both in materials and structure, rapid prototyping technology has become one of the important methods for tissue engineering scaffold fabrication in this field.
文摘Purpose: Selective laser sintering (SLS) is a rapid pro- totyping technique applied to produce tissue-engineer- ing scaffolds from powder materials. The standard scanning technique, however, often produces struts of extensive thickness, which means fabrication of high- ly porous scaffolds with small overall dimensions is quite difficult. Nevertheless, this study aims to overcome this shortfall. Design/methodology/approach: To this end, three scanning methods were evaluated in terms of minimum feature size and freedom of design, using a test polyamide (PA) material. Polycaprolactone (PCL) was then employed to create highly porous 3D scaffolds using the preferred scanning me- thod to produce thin struts. Findings: While in normal scanning mode some features were well above the laser spot diameter, strut thicknesses below the laser spot diameter were achieved when using the “outline scan” function for PA material. Those achieved for PCL were slightly higher and in the 500-800 ?m range, with an average pore size of 400 μm. Investigations on the properties of the scaffolds revealed an effective compression modulus of the PCL scaffold of 6.5 MPa. Furthermore, there was no change in physical or che- mical properties when the scaffolds were stored in a physiological environment for 7 weeks. Originality/ value: Though SLS is considered as a fabrication te- chnique for tissue engineering scaffolds, actually pro- duced scaffolds did not comply with porosity requirements and limitations of the SLS process in produ- cing features at the size of the laser beam spot have not been discussed. The present paper shows the capabilities of the SLS process based on two materials and presents a method to minimize feature size in scaffolds.
基金Funded by the Postdoctor Science Fund of China (No. 20070410715) Shanghai Excellent Youth Special Fund (No. 17014)
文摘A novel method of designing and preparing bone tissue engineering scaffolds with controllable porous structure of both macro channels and micro pores was proposed. The CAD software UG NX3.0 was used to design the macro channels＇ shape, size and distribution. By integrating rapid prototyping and traditional porogen technique, the macro channels and micro pores were formed respectively. The size, shape and quantity of micro pores were controlled by porogen particulates. The sintered β-TCP porous scaffolds possessed connective macro channels of approximately 500 μm and micro pores of 200-400 μm. The porosity and connectivity of micro pores became higher with the increase of porogen ratio, while the mechanical properties weakened. The average porosity and compressive strength offl-TCP scaffolds prepared with porogen ratio of 60wt% were 78.12% and 0.2983 MPa, respectively. The cells＇ adhesion ratio of scaffolds was 67.43%. The ALP activity, OCN content and cells micro morphology indicated that cells grew and proliferated well on the scaffolds.
文摘Biomaterials,β-TCP (β-tricalcium phosphate),and polymeric blends were used on a selective laser sintering (SLS) system,a kind of rapid prototyping machine,to produce some scaffold specimens which were designed with CAD (Computer Aided Design) software according to bone tissue engineering scaffold characteristics and properties. The scaffolds were produced with a pore size 800μm,and regular geometrical cylinder or sphere pores,depending on the processing. Then the specimens were treated by high temperature to assess their suitability on SLS processing. Their microstructures which had been investigated by scanning electron microscopy (SEM) exhibited fully interconnected pore which had a range size 500-800μm. X-ray diffraction analysis performed after high temperature treatment showed that β-TCP did not change. The porosity checked was about 71.29%. And the treated scaffolds could be provided an inter-connective network for the circulation of tissue fluid and hence sped up osteogenesis.
基金Singapore National Research Foundation (NRF) for funding the Singapore Centre for 3D Printing (SC3DP)
文摘A growing number of three-dimensional(3D)-print- ing processes have been applied to tissue engineering. This paper presents a state-of-the-art study of 3D-printing technologies for tissue-engineering applications, with particular focus on the development of a computer-aided scaffold design system; the direct 3D printing of functionally graded scaffolds; the modeling of selective laser sintering(SLS) and fused deposition modeling(FDM) processes; the indirect additive manufacturing of scaffolds, with both micro and macro features; the development of a bioreactor; and 3D/4D bioprinting. Technological limitations will be discussed so as to highlight the possibility of future improvements for new 3D-printing methodologies for tissue engineering.
基金supported by the Science and Technology Commission of Shanghai Municipality(No.15JC1491003),China
文摘Bone defects arising from a variety of reasons cannot be treated effectively without bone tissue reconstruction.Autografts and allografts have been used in clinical application for some time,but they have disadvantages.With the inherent drawback in the precision and reproducibility of conventional scaffold fabrication techniques,the results of bone surgery may not be ideal.This is despite the introduction of bone tissue engineering which provides a powerful approach for bone repair.Rapid prototyping technologies have emerged as an alternative and have been widely used in bone tissue engineering,enhancing bone tissue regeneration in terms of mechanical strength,pore geometry,and bioactive factors,and overcoming some of the disadvantages of conventional technologies.This review focuses on the basic principles and characteristics of various fabrication technologies,such as stereolithography,selective laser sintering,and fused deposition modeling,and reviews the application of rapid prototyping techniques to scaffolds for bone tissue engineering.In the near future,the use of scaffolds for bone tissue engineering prepared by rapid prototyping technology might be an effective therapeutic strategy for bone defects.
基金Funded by the Harbin Science and Technology Innovation Researchers Project(No.2007RFXXSO21)
文摘A new Precision Extrusion nozzle based ball screw transmission was developed. 3D hierarchical porous PLLA/nano-Hydroxyapatite（PLLA/nHA） scaffolds were fabricated by low-temperature deposition manufacturing. Scaffolds with macropores of 200-500 rtm and micropores about 10 pm were fabricated through a thorough study and control of the processing parameters, in which the processing path and speed of material extrusion determine the macropores and there is a suitable temperature zone for fabricating qualified macropores. Micropore morphology can be controlled by adjusting supercooling of solvent crystallization or adding water into the solvent system. The compressive modulus of the scaffolds in air and phosphate buffer solution was measured, which increased with HA addition. In-vitro cell culture results showed a ~ood biocomoatibilitv of PLLA/HA scaffolds with the ore-osteoblastic MC3T3-E1 cells.
