Laser cladding in-situ carbide particle reinforced Fe-based composite coatings with rare earth oxide addition

Particulate reinforced metal matrix composite(PR-MMC) has excellent properties such as good wear resistance,corrosion resistance and high temperature properties.Laser cladding is usually used to form PR-MMC on metal surface with various volume fractions of ceramic particles.Recent literatures showed that laser melting of powder mixture containing carbon and carbide-forming elements,was favorable for the formation of in-situ synthesized carbide particles.In this paper,rare earth oxide(RE2O3) was added into t...

Rare Earth Effects on Adhesion of Cr_2O_3 Oxide Scale Formed on Surface of Co-40Cr Alloy

Isothermal and cyclic oxidation behaviors of Co 40Cr alloy at 1000 ℃ in air were studied. Scanning electron microscopy (SEM) was used to examine the oxide scale formed on the surface of the alloy. By comparing the oxidation behaviors of Co 40Cr alloy and its 3×10 16 and 3×10 17 Y +/cm 2 implanted specimens, it was found that the resistant to oxidation property of Co 40Cr was greatly improved due to the implantation of yttrium. Acoustic emission was used to study the distribution of defects at the interface between the scale and alloy. Raman spectrum was also used to study the stress status in chromic scale formed on the surface of Co 40Cr with and without yttrium. The main reason for the improvement of resistant to oxidation property of Y doped Co 40Cr probably is that yttrium can segregate to Cr 2O 3 grain boundaries and change the scale′s growing mechanism and mechanical property. Most importantly, Y implantation decreases the size and number of interfacial defects and the residual stress in the scale, and remarkably enhances the adhesion of chromia scale with Co 40Cr substrate.

Effect of mixed rare earth oxides and CaCO_3 modification on the microstructure of an in-situ Mg_2Si/Al-Si composite

The effects of mixed rare earth oxides and CaCO3 on the microstructure of an in-situ Mg2Si/Al-Si hypereutectic alloy composite were investigated by optical microscope,scanning electron microscope,and energy dispersive spectrum analysis. The results showed that the morphol-ogy of the primary Mg2Si phase particles changed from irregular or crosses to polygonal shape,their sizes decreased from 75 μm to about 25 μm,and the compound of both the oxide and CaCO3 was better than either the single mixed rare earth o...

Thermodynamics of Modifying Effect of Rare Earth Oxide on Inclusions in Hardfacing Metal of Medium-High Carbon Steel

The modifying effect of rare earth (RE) oxide on inclusions in hardfacing metals of medium-high carbon steel was investigated by means of thermodynamics. The thermodynamic analysis for inclusion formation shows that RE oxide can be reduced to RE element by carbon, then the RE element can react with oxygen and sulfur to form the RE oxide, RE sulfide and RE oxide-sulfide in hardfacing molten pool. The deoxidization and the desulphurization can be carried out and the liquid metal can be purified. In addition, RE oxide can also react with sulfur to form RE oxide-sulfide directly. Therefore, the harmful effect of sulfur can be decreased.

Phase Behavior and Crystal Structure of Perovskite-Type Rare Earth Complex Oxides

Several compounds of rare earth complex oxides containing manganese and titanium were synthesized in Ar, and their crystal structures were analyzed by powder X-ray diffraction data and Rietveld method. Structures of A0.67Ln0.33 Mn0.33Ti0.6703（A = Ca or Sr and Ln = rare earth） were found to have orthorhombic symmetry with the space group Pnrna, and their interatomic distances and bond angles were obtained. This space group was also derived from electron microscopic study. Electrical conductivity of Cao.67Ln0.33Mn0.33Ti0.6703 for several rare earth elements showed a semiconducting property with the activation energy of 0.4 eV. Some of these compounds of the strontium system show the antiferromagnetic properties below 10 K.

Preparation and Characterization of Microporous Nano-Tungsten Trioxide and Its Photocatalytic Activity after Doping Rare Earth

Aqueous sols and gels of tungstic acid were prepared from Na2WO4 with protonated cation-exchange resin. Nano-tungsten oxide of a microporous lamella was synthesized by means of washing of WO3· 2H2O with distilled water under ultrasonic wave agitation and centrifuging repeatedly, and the specific surface area tended to increase gradually with washing and centrifuging. The sample of centrifuged 7 h has more than 2 times highs specific surface area and more high photocatalytic activity . The mechanisms are also discussed.

Hydrogen production from coke oven gas over LiNi/γ-Al_2O_3 catalyst modified by rare earth metal oxide in a membrane reactor

The performance of LiNi/γ-Al2O3 catalysts modified by rare earth metal oxide （La2O3 or CeO2） packed on BCFNO membrane reactor was discussed for the partial oxidation of methane （POM） in coke oven gas （COG） at 875 ℃. The NiO/γ-Al2O3 catalysts with different amounts of La2O3 and CeO2 were prepared with the same preparation method and under the same condition in order to compare the reaction performance （oxygen permeation, CH4 conversion, H2 and CO selectivity） on the membrane reactor. The results show that the oxygen permeation flux increased significantly with LiNiREOx/γ-Al2O3 （RE = La or Ce） catalysts by adding the element of rare earth especially the Ce during the POM in COG. Such as, the Li15wt%CeO29wt%NiO/γ-Al2O3 catalyst with an oxygen permeation flux of 24.71 ml·cm^-2·min^-1 and a high CH4 conversion was obtained in 875 ℃. The resulted high oxygen permeation flux may be due to the added Ce that inhibited the strong interaction between Ni and Al2O3 to form the NiAl2O4 phase. In addition, the introduction of Ce leads up to an important property of storing and releasing oxygen.

Study on rare earth/alkaline earth oxide-doped CeO_2 solid electrolyte

Five types of rare earth/alkaline earth oxide-doped CeO2 superfine-powders were synthesized by a low-temperature combustion technique. The relevant solid electrolyte materials were also sintered by pressureless sintering at different temperatures. The results of X-ray diffraction and transmission electron microscopy showed that the grain size of the powders was approximately 20-30 nm, and rare earth/alkaline earth oxides were completely dissolved into ceria-based solid solution with fluorite structure. The electrical conductivities of the SmzO3-CeO2 system were measured by the ac impedance technique in air at temperatures ranging from 513-900℃. The results indicated that the ionic conductivities of Srno.2oCe0.8Ol.875 solid electrolyte increase with increasing sintering temperature, and the relationship between the conductivities and measuring temperature obeys the An＇henius equation. Then the SmzO3-CeO2 material was further doped with other rare earth/alkaline earth oxide, and the conductivities improve with the effective index.

Effect of Roasting Conditions of Rich Cerium Rare Earth Carbonate on Crystallite Morphology and Polishing Ability of Ceria-Based Rare Earth Oxide

The granule shape and crystal structure of the the ceria-based rare earth oxide which were roasted at 600～1050 ℃ for 2～6 h and then cooled in furnace, cooled out of furnace or cooled in water were studied by means of XRD and SEM. The results revealed that the rich cerium rare earth carbonate could be changed into the rare earth oxide which was a kind of sandwich made of globose granule whose diameter was between 0.5～3.0 μm after being roasted in 900 ℃ for 2 h. This kind of crystal lattice in rare earth oxide belonged to face-centered cubic lattice and its space between crystal surface {111} and {200} (viz. L111 and L200) would enlarge as the roasting temperature increasing. With increasing roasting temperature, L111 would rise straightly upward, and L200 would rise straightly upward when roasting time was 2～4 h but changed little when roasting time was 4～6 h. The glass-polishing experiments found that the polishing ability of the ceria-based rare earth oxide was the best as L111 was 43～53 nm and the L200 was 43～56 nm.

Gasoline Sensor Based on Rare Earth-Doped Indium Oxide with Low Power Consumption

Nanocrystalline indium oxide powders were prepared by microemulsion and then Y2O3 and Nd2O3 doped In2O3 were synthesized separately by impregnation and chemical co-deposition. The structure and morphology were characterized by XRD and TEM, respectively. Gas sensing properties were tested at static state. The results show that homogeneous indium oxide nanopowder with main grain size of 20 nm can be obtained from microemulsion after sintered at 600 ℃ for 1 h. Pure indium oxide gas sensor has higher sensitivity to gasoline than that to ethanol, HCHO, C6H6, NH3, C4H10, but the selectivity is not as well as sensitivity.

Simultaneous Determination of Trace Rare Earth Elements and Other Elements in High Purity Terbium Oxide (Tb_4O_7) by ICP-AES After HPLC Separation Using P507 Resin

This article describes a new method for the simultaneous determination of trace rare earth elements (REEs) and non rare earth elements (NREEs) in high purity terbium oxide by ICP-AES after HPLC separation using P507 resin. The chromatographic separation of the analytes from the matrix using dilute nitric acid as mobile phase was studied. The experimental results showed that a favorable separation of trace metals (Cu and Gd) from the matrix (Tb) can easily be achieved by elution with dilute nitric acid within 25 min. The proposed method was applied to the determination of trace metals (Ca, Cu, Mg, Mn, Ni, Si, La, Ce, Pr, Nd, Sm, Eu and Gd) in high purity terbium oxide. The detection limits (DLs) for the analytes ranged from 0.4-4.0 μg\5g -1, and the recoveries are from 78%-105%.

Effects of Rare Earth Oxides on Viscosity,Thermal Expansion,and Structure of Alkali-Free Boro-Aluminosilicate Glass

Effects of rare earth oxides（Y2O3,La2O3,and Er2O3） on the viscosity,thermal expansion,and structure of alkali-free boro-aluminosilicate glasses were investigated by the rotating crucible viscometer,dilatometry and FT-IR absorption spectra.The results showed that the melting temperature of alkali-free boroaluminosilicate glasses decreased from 1 697.55 to 1 662.59,1 674.37 and 1 640.87 ℃ with the introduction of 1 mol%La2O3,Y2O3 and Er2O3,respectively.However,the glass transition temperature Tg,dilatometric softening temperature T_d and coefficient of thermal expansion of alkali-free boro-aluminosilicate glasses increased when adding the rare-earth oxides.At high temperatures,incorporating rare earth oxides into glass resulted in the peak at about 1 085 cm^-1 towards lower wavenumber and the absorption band in the region of 850-1 260 cm^-1 broader,which indicated that rare earths acted as network modifiers and increased the numbers of non-bridging oxygen in the glass melts.However,the rare earths had an opposite effect and accumulated the glass structure at low temperatures near Tg.

Roles of rare earth oxide additives in millimeter-wave sintering of AlN

Roles of rare earth oxide （RE2O3） additives in millimeter-wave（MM） sintering of AIN were investigated from the standpoints of phase diagram, heating characteristics of rare earth oxides, and morphology of intergranular oxide phase. In the millimeter-wave sintering of AIN, densification temperature decreased with the decrease of the ionic radius of rare earth ion and was closely related with the eutectic temperature in the RE2Oa-Al2O3 binary system. The lowest densification temperature in the millimeter-wave sintering of AIN with Yb2O3 additive was attributed to the largest heating rate of Yb2O3-Al2O3 binary oxide under millimeter-wave radiation. Furthermore, the lowest densification temperature could be attained while selecting the Yb2O3 content so as to form the intergranular phase with the eutectic composition in the Yb2O3-Al2O3 binary system. The result showed good agreement with the above mentioned during the sintering of Si3N4 with Yb2O3-Al2O3 additive. From TEM observation, it was verified that film-like intergranular oxide phase formed under millimeter-wave radiation was favorable for attaining high thermal conductivity in the Yb2O3 added AINs.

Direct Determination of Rare Earth Impurities in High Purity Europium Oxide by ICP-MS

A novel inductively coupled plasma mass spectrometry method for direct determination of trace rare earth impurities in high purity europium oxide (Eu_2O_3) was developed. The spectral interference,matrix effect,instrument parameters fluctuation were investigated and the optimized experimental conditions were established. Under the selected conditions,the detection limits of the method are 3～7 ng·L (-1),the RSD is varied between 2.1%～8.4%,and the percentage recovery is ranged from 90% to 113% for the analytes. The solid detection limit for gross amount of 13 rare earth impurities is 0.19 μg·g (-1) when the matrix (Eu) concentration of 0.1 mg·ml (-1) was chosen. Compared with the reported methods in the literature,this method has several attractive features: simple,small sample amount required,no internal standard and matrix matching requirements.

Separation and Manipulation of Rare-earth Oxide Particles by Dielectrophoresis

A challenge in chemical engineering is the separation and purification of rare-earth elements and their compounds. We report the design and manufacture of a dielectrophoresis(DEP) microchip of microelectrode arrays. This microchip device is constructed in order to use DEP to capture micro-particles of rare-earth oxides in petro-leum. Dielectrophoretic behavior of micro-particles of rare-earth oxides in oil media is explored. The dielectropho-retic effects of particles under different conditions are investigated. It is showed that the prepared microchip is suit-able for use in the investigation of dielectrophoretic responses of the rare-earth oxides in oil media. The factors such as frequency,particle size and valence of rare-earth metal are discussed. When the frequency is fixed,the transla-tion voltage decreases as particle size increases. Lower frequencies are more effective for manipulation of inorganic particles in oil media. Particles of the same rare-earth oxide with different size,as well as particles of different rare-earth oxides,are captured in different regions of the field by regulating DEP conditions. This may be a new method for separation and purification of particles of different rare-earth oxides,as well as classification of particles with different size.

Electric-magnetic-force characteristics of rare earth barium copper oxide superconductor high-field coils based on screening effect and strain sensitivity

Rare earth barium copper oxide(REBCO)is the most researched and commercialized second-generation high-temperature superconducting material.Due to the anisotropic structure,strong deformation sensitivity,and central field errors caused by screening current effects,it is still a challenge for commercialization applications.In this study,the transversely isotropic constitutive relationship is selected as the mechanical model based on the structural characteristics of REBCO tapes,and suitable microelements are selected to equate the elastic constants using their average stress-strain relationships.Then,a two-dimensional axisymmetric model for coils wound by single-layer tapes is constructed to analyze the dependence of the electric-magnetic-force distribution in the tape on the strain.Finally,the anisotropic approximation of the homogenized bulk method is used to equate large-turn high-field coils,and the electric-magnetic-force distribution characteristics of the coils with/without screening effects and mechanical strain conditions are investigated,respectively.The results reveal that the mechanical strain has a weakening effect on the electromagnetic field distribution of superconducting tapes,but causes a significant enhancement in the force field distribution.In the presence of 0.5% mechanical strain,the maximum weakening of the peak value of the current density and the critical current density inside the high-field coil can reach about 8% and 13%,respectively,with a nearly 5 times increase in the peak stress.The screening current makes the current field distribution inside the coil improve by about 10 times.The screening current induced magnetic field can reach up to 0.8 T,making the relative error of the high-field coil center up to 7.8%.

Glass-forming Ability and Chemical Stability of Magneto-optical Glass Heavily Doped with Rare Earth Oxide

The glass-forming region of B2O3-Al2O3-SiO2 （BAS） glass heavily doped with rare earth oxides was investigated by an effective method, and the chemical stability was investigated by powder method. Influences of rare earth oxides on the glass-forming ability and the chemical stability of the BAS glass were also discussed. The experimental results show that the BAS glass-forming region expands firstly with the increase of the Tb2O3 content up to 30mol% and then shrinks. The acid-resistant capacity of the BAS glass doped with rare earth oxides is the lowest, the water-resistant capacity is secondary, and the alkali-resistant capacity is the best. Besides, the glass chemical stability can be improved by doping appropriate amount of rare earth oxides. Moreover, the stronger the ionic polarization ability of the rare earth ions is, the better the chemical stability of the BAS glass will be.

Low Temperature Preparation of Ceria Solid Solutions Doubly Doped with Rare-Earth and Alkali-Earth and Their Properties as Solid Oxide Fuel Cells

A series of solid electrolytes, (Ce 0.8 Ln 0.2 ) 1- x M x O 2-δ (Ln= La, Nd, Sm, Gd, M:Alkali earth), were prepared by amorphous citrate gel method. XRD patterns indicate that a pure fluorite phase is formed at 800 ℃. The electrical conductivity and the AC impedance spectra were measured. XPS spectra show that the oxygen vacancies increase owing to the MO doping, which results in the increase of the oxygen ionic transport number and conductivity. The performance of ceria based solid electrolyte is improved. The effects of rare earth and alkali earth ions on the electricity were discussed. The open circuit voltages and maximum power density of planar solid oxide fuel cell using (Ce 0.8 Sm 0.2 ) 1-0.05 Ca 0.05 O 2- δ as electrolyte are 0.86 V and 33 mW·cm -2 , respectively.

Magnetic Behavior of Some Rare-Earth Transition-Metal Perovskite Oxide Systems

Magnetic properties were investigated for the rare-earth 3d-transition metal oxides with the perovskite structure. Intriguing magnetic phenomena were reviewed for a few systems:magnetization peak effect in the titanates, magnetization reversal in the chromites and metallic ferromagnetism in the cobaltites. The results suggest an important role of the rare-earth ions for the magnetic properties of such complex oxides.

Preparation and properties of composite polymer electrolyte modified with nano-size rare earth oxide

Poly(vinylidene fluoride-co-hexafluoropropylene)(PVDF-HFP)based composite polymer electrolyte(CPE)modified with CeO2,La2O3 and Y2O3 nano-rare earth oxides was prepared by phase inversion technique.Physical and chemical properties of the modified CPEs were studied by SEM,TG-DSC and electrochemical methods.The results show that the CPE modified with 10% La2O3(mass fraction)has the best practical applicability,which indicates that the thermal and electrochemical stability can reach over 400°C and 4.5V,respectively,and temperature dependence of ionic conductivity follows Vogel-Tamman-Fulcher(VTF)relationship and ionic conductivity at room temperature is up to 3.3mS/cm.The interfacial resistance R i reaches a stable value about 557Ω after 6d storage.