A new method of preparation of irradiative material by using rare earth as luminophor and inorganic powder as base nucleus was presented.Rare earth was used to make colloid, which was mixed with base nucleus solution,...A new method of preparation of irradiative material by using rare earth as luminophor and inorganic powder as base nucleus was presented.Rare earth was used to make colloid, which was mixed with base nucleus solution,where deposition/attachment reaction took place and rare earth was adhered onto the surface of base nucleus, hence yielding a new rare earth encapsulated irradiative material.Fluorescent spectrum analysis shows that this material possesses two emission peaks, one within 400 ～ 500 nm and the other within 580 ～ 700 nm, reflecting the luminous characteristics of original rare earth material.展开更多
Simultaneous recovery of rare earth,nickel and cobalt resources from the anode material of hydrogen-nickel battery was performed through a hydrometallurgical process. Most of rare earth elements are separated from nic...Simultaneous recovery of rare earth,nickel and cobalt resources from the anode material of hydrogen-nickel battery was performed through a hydrometallurgical process. Most of rare earth elements are separated from nickel and cobalt in the form of sulfates when the anode material is firstly leached with sulfuric acid. Then,the precipitated rare earth sulfates are dissolved with sodium hydroxide to form rare earth hydroxides. The rare earth element,zinc and manganese ions in the lixivium are also separated from nickel and cobalt by using PC-88A extractant system,and the organic phase loaded rare earth is stripped with hydrochloric acid. By neutralizing the stripping solution with rare earth hydroxide,the rare earth chloride is obtained. Under the suitable leaching conditions of sulfuric acid 3 mol/L,leaching time 4 h and temperature 95 ℃,94.5% of rare earth in the anode material is transformed into the sulfate precipitates,and the leaching ratios of nickel and cobalt can approach 99.5%. When the pH value of the extractive system is controlled in the range of 3.0-3.5,the rare earth elements in the lixivium can be extracted completely into the organic phase,and the stripping recovery of the rare earth can reach 98% in the extraction stage. The total recoveries of rare earth,nickel and cobalt are 98.9%,98.4% and 98.5%,respectively.展开更多
Chitin powder and chitin-aerogel were prepared from shrimp wastes and used to uptake Y^(3+)from aqueous solutions and concentrate this rare earth element from phosphogypsum(PG).Chitin aerogel displays a specific surfa...Chitin powder and chitin-aerogel were prepared from shrimp wastes and used to uptake Y^(3+)from aqueous solutions and concentrate this rare earth element from phosphogypsum(PG).Chitin aerogel displays a specific surface area of 945 m^(2)/g,while chitin powder is 3.6 m^(2)/g,which largely influences its adsorption ability.Regarding the adsorption in synthetic solutions,the effect of pH on Y^(3+)removal is strong for chitin powder adsorbent.In contrast,no big pH influence was detected for chitin aerogel.Electrostatic interactions and chelation can highlight the proposed mechanism of Y^(3+)on chitin adsorbents for the powder and aerogel.Furthermore,in addition to these interactions,pore filling/pore diffusion is the main mechanism of Y^(3+)removal in the chitin aerogel.Chitin aerogel is efficient in concentrating 8 times the Y^(3+)from PG,a very complex matrix.The complex chitin aerogel-Y^(3+)can be a secondary source of rare earth elements for other applications.展开更多
文摘A new method of preparation of irradiative material by using rare earth as luminophor and inorganic powder as base nucleus was presented.Rare earth was used to make colloid, which was mixed with base nucleus solution,where deposition/attachment reaction took place and rare earth was adhered onto the surface of base nucleus, hence yielding a new rare earth encapsulated irradiative material.Fluorescent spectrum analysis shows that this material possesses two emission peaks, one within 400 ～ 500 nm and the other within 580 ～ 700 nm, reflecting the luminous characteristics of original rare earth material.
基金Projects(50674060, 50734005) supported by the National Natural Science Foundation of ChinaProjects(20051070103, 2008B030302014) supported by the Development of Science and Technology of Guangdong Province, ChinaProject(2008BAC46B03) supported by the National Key Technology R&D Program
文摘Simultaneous recovery of rare earth,nickel and cobalt resources from the anode material of hydrogen-nickel battery was performed through a hydrometallurgical process. Most of rare earth elements are separated from nickel and cobalt in the form of sulfates when the anode material is firstly leached with sulfuric acid. Then,the precipitated rare earth sulfates are dissolved with sodium hydroxide to form rare earth hydroxides. The rare earth element,zinc and manganese ions in the lixivium are also separated from nickel and cobalt by using PC-88A extractant system,and the organic phase loaded rare earth is stripped with hydrochloric acid. By neutralizing the stripping solution with rare earth hydroxide,the rare earth chloride is obtained. Under the suitable leaching conditions of sulfuric acid 3 mol/L,leaching time 4 h and temperature 95 ℃,94.5% of rare earth in the anode material is transformed into the sulfate precipitates,and the leaching ratios of nickel and cobalt can approach 99.5%. When the pH value of the extractive system is controlled in the range of 3.0-3.5,the rare earth elements in the lixivium can be extracted completely into the organic phase,and the stripping recovery of the rare earth can reach 98% in the extraction stage. The total recoveries of rare earth,nickel and cobalt are 98.9%,98.4% and 98.5%,respectively.
基金Project supported by Brazilian National Council for Scientific and Technological Development/CNPq(405982/2022-4,303992/2021-2)Coordination for the Improvement of Higher Education Personnel/CAPES(CAPESPRINT Program)。
文摘Chitin powder and chitin-aerogel were prepared from shrimp wastes and used to uptake Y^(3+)from aqueous solutions and concentrate this rare earth element from phosphogypsum(PG).Chitin aerogel displays a specific surface area of 945 m^(2)/g,while chitin powder is 3.6 m^(2)/g,which largely influences its adsorption ability.Regarding the adsorption in synthetic solutions,the effect of pH on Y^(3+)removal is strong for chitin powder adsorbent.In contrast,no big pH influence was detected for chitin aerogel.Electrostatic interactions and chelation can highlight the proposed mechanism of Y^(3+)on chitin adsorbents for the powder and aerogel.Furthermore,in addition to these interactions,pore filling/pore diffusion is the main mechanism of Y^(3+)removal in the chitin aerogel.Chitin aerogel is efficient in concentrating 8 times the Y^(3+)from PG,a very complex matrix.The complex chitin aerogel-Y^(3+)can be a secondary source of rare earth elements for other applications.
