The effect of rare earths （RE） surface treatment of carbon fibers （CF） on tribological properties of CF reinforced polytetrafluoroethylene （PTFE） composites under oil-lubricated condition was investigated. Exper...The effect of rare earths （RE） surface treatment of carbon fibers （CF） on tribological properties of CF reinforced polytetrafluoroethylene （PTFE） composites under oil-lubricated condition was investigated. Experimental results revealed that RE treated CF reinforced PTFE （CF/PTFE） composite had the lowest friction coefficient and wear under various applied loads and sliding speeds compared with untreated and air-oxidated composites. X-ray photoelectron spectroscopy （XPS） study of carbon fiber surface showed that, after RE treatment, oxygen concentration increased obviously, and the amount of oxygen-containing groups on CF surfaces were largely increased. The increase in the amount of oxygen-containing groups enhanced interfacial adhesion between CF and PTFE matrix. With strong interfacial adhesion of the composite, stress could be effectively transmitted to carbon fibers; carbon fibers were strongly bonded with VITE matrix, and large scale rubbing-off of PTFE be prevented, therefore, tribological properties of the composite was improved.展开更多
The rare earth composite ceramic materials were prepared using rare earths and far infrared natural mineral. The effects of the as-prepared ceramic materials on the oil consumption and air pollutants emissions of oil-...The rare earth composite ceramic materials were prepared using rare earths and far infrared natural mineral. The effects of the as-prepared ceramic materials on the oil consumption and air pollutants emissions of oil-burning boiler were investigated. The results show that the composite ceramic materials can radiate higher intensity of far infrared. The molecular movement is strengthened and the chemical bonds of the molecules are easily ruptured when the diesel oil is dealt with the composite materials. The oil-saving rate of the RBS·VH-1 .5 boiler dealt with the rare earth composite ceramic materials is 3.49%, and the reducing rates of CO and NO in the exhaust gas are 25.4% and 9.7%, respectively.展开更多
The resin composite materials (RCM) were prepared by the method of doping resin with tourmaline powders modified with lanthanum element. It was characterized by scanning electron microscope (SEM), IR radiation determi...The resin composite materials (RCM) were prepared by the method of doping resin with tourmaline powders modified with lanthanum element. It was characterized by scanning electron microscope (SEM), IR radiation determination, X-ray diffraction (XRD), and fourier transform infrared spectroscope (FTIR). The results showed that the RCM could radiate higher intensity of far infrared. The molecular movement was strengthened and the inter-molecular contacts were easily reduced when the diesel oil was dealt with the RCM. The effects of the RCM on the oil consumption and air pollutant emissions of oil-burning boiler were investigated. The oil-saving rate of the RBS·VH-1.5 boiler dealt with the RCM was 2.76%, and the reducing rates of CO and NO in the exhaust gas were 32.9% and 15.8%, respectively.展开更多
基金the National Natural Science Foundation of China (50275093)
文摘The effect of rare earths （RE） surface treatment of carbon fibers （CF） on tribological properties of CF reinforced polytetrafluoroethylene （PTFE） composites under oil-lubricated condition was investigated. Experimental results revealed that RE treated CF reinforced PTFE （CF/PTFE） composite had the lowest friction coefficient and wear under various applied loads and sliding speeds compared with untreated and air-oxidated composites. X-ray photoelectron spectroscopy （XPS） study of carbon fiber surface showed that, after RE treatment, oxygen concentration increased obviously, and the amount of oxygen-containing groups on CF surfaces were largely increased. The increase in the amount of oxygen-containing groups enhanced interfacial adhesion between CF and PTFE matrix. With strong interfacial adhesion of the composite, stress could be effectively transmitted to carbon fibers; carbon fibers were strongly bonded with VITE matrix, and large scale rubbing-off of PTFE be prevented, therefore, tribological properties of the composite was improved.
基金Project supported by the Key Technologies R & D Programme of Tianjin (06YFGZGX02400)
文摘The rare earth composite ceramic materials were prepared using rare earths and far infrared natural mineral. The effects of the as-prepared ceramic materials on the oil consumption and air pollutants emissions of oil-burning boiler were investigated. The results show that the composite ceramic materials can radiate higher intensity of far infrared. The molecular movement is strengthened and the chemical bonds of the molecules are easily ruptured when the diesel oil is dealt with the composite materials. The oil-saving rate of the RBS·VH-1 .5 boiler dealt with the rare earth composite ceramic materials is 3.49%, and the reducing rates of CO and NO in the exhaust gas are 25.4% and 9.7%, respectively.
基金the Key Technologies R &D Programme of Tianjin (06YFGZGX02400)
文摘The resin composite materials (RCM) were prepared by the method of doping resin with tourmaline powders modified with lanthanum element. It was characterized by scanning electron microscope (SEM), IR radiation determination, X-ray diffraction (XRD), and fourier transform infrared spectroscope (FTIR). The results showed that the RCM could radiate higher intensity of far infrared. The molecular movement was strengthened and the inter-molecular contacts were easily reduced when the diesel oil was dealt with the RCM. The effects of the RCM on the oil consumption and air pollutant emissions of oil-burning boiler were investigated. The oil-saving rate of the RBS·VH-1.5 boiler dealt with the RCM was 2.76%, and the reducing rates of CO and NO in the exhaust gas were 32.9% and 15.8%, respectively.
