Study on the hydrogen absorption properties of a YGdTbDyHo rare-earth high-entropy alloy

This study investigated the microstructure and hydrogen absorption properties of a rare-earth high-entropy alloy(HEA),YGdTbDyHo.Results indicated that the YGdTbDyHo alloy had a microstructure of equiaxed grains,with the alloy elements distributed homogeneously.Upon hydrogen absorption,the phase structure of the HEA changed from a solid solution with an hexagonal-close-packed(HCP)structure to a high-entropy hydride with an faced-centered-cubic(FCC)structure without any secondary phase precipitated.The alloy demonstrated a maximum hydrogen storage capacity of 2.33 H/M(hydrogen atom/metal atom)at 723 K,with an enthalpy change(ΔH)of-141.09 kJ·mol^(-1)and an entropy change(ΔS)of-119.14 J·mol^(-1)·K^(-1).The kinetic mechanism of hydrogen absorption was hydride nucleation and growth,with an apparent activation energy(E_(a))of 20.90 kJ·mol^(-1).Without any activation,the YGdTbDyHo alloy could absorb hydrogen quickly(180 s at 923 K)with nearly no incubation period observed.The reason for the obtained value of 2.33 H/M was that the hydrogen atoms occupied both tetrahedral and octahedral interstices.These results demonstrate the potential application of HEAs as a high-capacity hydrogen storage material with a large H/M ratio,which can be used in the deuterium storage field.

Critical current degradation in an epoxy-impregnated rare-earth Ba_(2)Cu_(3)O_(7-x)coated conductor caused by damage during a quench

High-temperature superconducting(HTS)rare-earth Ba_(2)Cu_(3)O_(7-x)(REBCO)coated conductors(CCs)have significant potential in high-current and high-field applications.However,owing to the weak interface strength of the laminated composite REBCO CCs,the damage induced by the thermal mismatch stress under a combination of epoxy impregnation,cooling,and quenching can cause premature degradation of the critical current.In this study,a three-dimensional(3D)electromagnetic-thermal-mechanical model based on the H-formulation and cohesive zone model(CZM)is developed to study the critical current degradation characteristics in an epoxy-impregnated REBCO CC caused by the damage during a quench.The temperature variation,critical current degradation of the REBCO CC,and its degradation onset temperature calculated by the numerical model are in agreement with the experimental data taken from the literature.The delamination of the REBCO CC predicted by the numerical model is consistent with the experimental result.The numerical results also indicate that the shear stress is the main contributor to the damage propagation inside the REBCO CC.The premature degradation of the critical current during a quench is closely related to the interface shear strength inside the REBCO CC.Finally,the effects of the coefficient of thermal expansion(CTE)of the epoxy resin,thickness of the substrate,and substrate material on the critical current degradation characteristics of the epoxy-impregnated REBCO CC during a quench are also discussed.These results help us understand the relationship between the current-carrying degradation and damage in the HTS applications.

The strain rate sensitive and anisotropic behavior of rare-earth magnesium alloy ZEK100 sheet

To overcome the limitation in formability at room temperature,manufacturers have developed magnesium alloys with remarkable properties by adding rare-earth elements.The rare-earth magnesium alloys behave differently from the conventional alloys,especially with respect to their coupled anisotropic and strain rate sensitive behavior.In the current work,such behavior of the rare-earth Mg alloy ZEK100 sheet at room temperature is investigated with the aid of the elastic viscoplastic self-consistent polycrystal plasticity model.Different strain rate sensitivities(SRSs)for various deformation modes are employed by the model to simulate the strain rate sensitive behaviors under different loading directions and loading rates.Good agreement between the experiments and simulations reveals the importance and necessity of using different SRSs for each deformation mode in hexagonal close-packed metals.Furthermore,the relative activities of each deformation mode and the texture evolution during different loadings are discussed.The anisotropic and strain rate sensitive behavior is ascribed to the various operating deformation modes with different SRSs during loading along different directions.

Extraction of Amino-J Acid from Waste-water by Emulsion Liquid Membrane

The emulsion liquid membrane technique was used to extract amino-J acid from industrial dye waste-water.The effects of stirring speed,ratio of the emulsion to water(Rew),ratio of the oil to internal phase(Roi)and membrane phase components on the extraction rate were investigated and optimized.The results showed that the extraction rate of amino-J acid approached 97% when the stirring speed was 300 r/min,Rew 1:6,Roi 1:1,trioctylamine(TOA)3 mL/100 mL kerosene,and methyl?didecyle?alcohol?acrylate(LMA-2)3 g/100 mL kerosene,respectively.The extraction rate had not changed with the oil phase reused for times.

Leaching behaviors of iron and aluminum elements of ion-absorbed-rare-earth ore with a new impurity depressant

Ion-absorbed rare-earth ore is an important mineral resource which is widely extracted by in-situ leaching process. And such process generates a significant amount of impurities such as aluminum and iron ions in leaching solution simultaneously. The surface characteristics and interactions by infrared spectroscopy and X-ray diffraction were studied to optimize the leaching conditions. It is found that the environment-friendly depressant LG-01 can react with the impurity ions through the formation of a new complex on the surface of leaching residues. Thus, it reduces significantly the concentration of impurity ions in leaching solution and improves the leaching rate of rare-earth ore. Moreover, a leaching rate of 95.6% and an impurity removal rate of 92% have been achieved under the optimized conditions.

Temperature-sensing array using the metal-to-insulator transition of Nd_(x)Sm_(1-x)NiO_(3)

Rare-earth nickelates(RENiO_(3))show widely tunable metal-to-insulator transition(MIT)properties with ignorable variations in lattice constants and small latent heat across the critical temperature(TMIT).Particularly,it is worth noting that compared with the more commonly investigated vanadium oxides,the MIT of RENiO_(3)is less abrupt but usually across a wider range of temperatures.This sheds light on their alternative applications as negative temperature coefficient resistance(NTCR)thermistors with high sensitivity compared with the current NTCR thermistors,other than their expected use as critical temperature resistance thermistors.In this work,we demonstrate the NTCR thermistor functionality for using the adjustable MIT of Nd_(x)Sm_(1-x)NiO_(3)within 200–400 K,which displays larger magnitudes of NTCR(e.g.,more than 7%/K)that is unattainable in traditional NTCR thermistor materials.The temperature dependence of resistance(R–T)shows sharp variation during the MIT of Nd_(x)Sm_(1-x)NiO_(3)with no hysteresis via decreasing the Nd content(e.g.,x≤0.8),and such a R–T tendency can be linearized by introducing an optimum parallel resistor.The sensitive range of temperature can be further extended to 210–360 K by combining a series of Nd_(x)Sm_(1-x)NiO_(3)with eight rare-earth co-occupation ratios as an array,with a high magnitude of NTCR(e.g.,7%–14%/K)covering the entire range of temperatures.

High-temperature corrosion of sintered RE_(2)Si_(2)O_(7)(RE=Yb and Ho)environmental barrier coating materials by volcanic ash

Rare-earth silicates are promising environmental barrier coatings(EBCs)that can protect SiC_(f)/Si C_(m)substrates in next-genera tion gas turbine blades.Notably,RE_(2)Si_(2)O_(7)(RE=Yb and Ho)shows potential as an EBC due to its coefficient of thermal expansion(CTE)compatible with substrates and high resistance to water vapor corrosion.The target operating temperature for next-generation tur bine blades is 1400°C.Corrosion is inevitable during adhesion to molten volcanic ash,and thus,understanding the corrosion behavior o the material is crucial to its reliability.This study investigates the high-temperature corrosion behavior of sintered RE_(2)Si_(2)O_(7)(RE=Yb and Ho).Samples were prepared using a solid-state reaction and hot-press method.They were then exposed to volcanic ash at 1400°C for 224,and 48 h.After 48 h of exposure,volcanic ash did not react with Yb_(2)Si_(2)O_(7)but penetrated its interior,causing damage.Meanwhile Ho_(2)Si_(2)O_(7)was partially dissolved in the molten volcanic ash,forming a reaction zone that prevented volcanic ash melts from penetrating the interior.With increasing heat treatment time,the reaction zone expanded,and the thickness of the acicular apatite grains increased The Ca:Si ratios in the residual volcanic ash were mostly unchanged for Yb_(2)Si_(2)O_(7)but decreased considerably over time for Ho_(2)Si_(2)O_(7).Th Ca in volcanic ash was consumed and formed apatite,indicating that RE^(3+)ions with large ionic radii(Ho>Yb)easily precipitated apatit from the volcanic ash.

Recent developments and applications on high-performance cast magnesium rare-earth alloys

During the past decades,with the increasing demands in lightweight structural materials,Mg alloys with low density and high performance have been extensively investigated and partly applied in some industries.Especially when rare earth(RE)elements are added as major alloying elements to Mg alloys,the alloy strength and creep resistance are greatly improved,which have promoted several series of Mg-RE alloys.This paper reviews the progress and developments of high-performance Mg-RE alloys in recent years with emphasis on cast alloys.The main contents include the alloy design,melt purification,grain refinement,castability,novel liquid casting and semisolid forming approaches,and the industrial applications or trials made of Mg-RE alloys.The review will provide insights for future developments of new alloys,techniques and applications of Mg alloys.

Advance in the chemical synthesis and magnetic properties of nanostructured rare-earth-based permanent magnets

Rare-earth-based permanent magnets are one of the most important magnets in both scientific and industrial fields. With the development of technology, nanostructured rarearth-based permanent magnets with high energy products are highly required. In this article, we will review the progress in chemical synthetic strategies of nanostructured rare-earth-based permanent magnets.

Component Content Soft-sensor Based on Neural Networks in Rare-earth Countercurrent Extraction Process

Throught fusion of the mechanism modeling and the neural networks modeling,a compo- nent content soft-sensor,which is composed of the equilibrium calculation model for multi-component rare earth extraction and the error compensation model of fuzzy system,is proposed to solve the prob- lem that the component content in countercurrent rare-earth extraction process is hardly measured on-line.An industry experiment in the extraction Y process by HAB using this hybrid soft-sensor proves its effectiveness.

Rare-earth element geochemistry reveals the provenance of sediments on the southwestern margin of the Challenger Deep

The hadal zone represents one of the last great frontiers in modern marine science,and deciphering the provenance of sediment that is supplied to these trench settings remains a largely unanswered question.Here,we examine the mineralogical and geochemical composition of a sediment core(core CD-1)that was recovered from the southwestern margin of the Challenger Deep within the Mariana Trench.Major element abundances and rare-earth element patterns from these sediments require inputs from both terrigenous dust and locally sourced volcanic debris.We exploit a two-endmember mixing model to demonstrate that locally sourced volcanic material dominates the sediment supply to the Challenger Deep(averaging^72%).The remainder,however,is supplied by aeolian dust(averaging^28%),which is consistent with adjacent studies that utilized Sr-Nd isotopic data.Building on a growing database,we strengthen our understanding of Asian aeolian dust input into the northwestern Pacific,which ultimately improves our appreciation of sedimentation in,and around,the hadal zone.

Separation and Manipulation of Rare-earth Oxide Particles by Dielectrophoresis

A challenge in chemical engineering is the separation and purification of rare-earth elements and their compounds. We report the design and manufacture of a dielectrophoresis(DEP) microchip of microelectrode arrays. This microchip device is constructed in order to use DEP to capture micro-particles of rare-earth oxides in petro-leum. Dielectrophoretic behavior of micro-particles of rare-earth oxides in oil media is explored. The dielectropho-retic effects of particles under different conditions are investigated. It is showed that the prepared microchip is suit-able for use in the investigation of dielectrophoretic responses of the rare-earth oxides in oil media. The factors such as frequency,particle size and valence of rare-earth metal are discussed. When the frequency is fixed,the transla-tion voltage decreases as particle size increases. Lower frequencies are more effective for manipulation of inorganic particles in oil media. Particles of the same rare-earth oxide with different size,as well as particles of different rare-earth oxides,are captured in different regions of the field by regulating DEP conditions. This may be a new method for separation and purification of particles of different rare-earth oxides,as well as classification of particles with different size.

Unloading behaviors of the rare-earth magnesium alloy ZE10 sheet

Due to their low symmetry in crystal structure,low elastic modulus(~45 GPa)and low yielding stress,magnesium(Mg)alloys exhibit strong inelastic behaviors during unloading.As more and more Mg alloys are developed,their unloading behaviors were less investigated,especially for rare-earth(RE)Mg alloys.In the current work,the unloading behaviors of the RE Mg alloy ZE10 sheet is carefully studied by both mechanical tests and crystal plasticity modeling.In terms of the stress-strain curves,the inelastic strain,the chord modulus,and the active deformation mechanisms,the substantial anisotropy and the loading path dependency of the unloading behaviors of ZE10 sheets are characterized.The inelastic strains are generally larger under compressive Loading-Un Loading(L-UL)than under tensile L-UL,along the transverse direction(TD)than along the rolling direction(RD)under tensile L-UL,and along RD than along TD under compressive L-UL.The basal slip,twinning and de-twinning are found to be responsible for the unloading behaviors of ZE10 sheets.

Structural and mechanical stability of rare-earth diborides

Structural and mechanical properties of several rare-earth diborides were systematically investigated by first principles calculations. Specifically, we studied XB2 , where X=Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, and Lu in the hexagonal AlB2 , ReB2 , and orthorhombic OsB2 -type structures. The lattice parameters, bulk modulus, bond distances, second order elastic constants, and related polycrystalline elastic moduli （e.g., shear modulus, Young’s modulus, Poisson’s ratio, Debye temperature, sound velocities） were calculated. Our results indicate that these compounds are mechanically stable in the considered structures, and according to ＂Chen’s method＂, the predicted Vickers hardness shows that they are hard materials in AlB2 - and OsB2 -type structures.

Hydrogen production through diesel steam reforming over rare-earth promoted Ni/γ-Al_2O_3 catalysts

Rare-earth （La, Ce, Yb） promoted Ni/γ-Al2O3 catalysts were prepared by impregnation method. Activity and carbon formation resistance of the prepared catalysts were evaluated under various reaction conditions. Catalyst characterizations with TG, TPR and H2 chemisorption were carried out to investigate the promoting mechanism. Experimental results show that rare-earth promoters, especially Yb promoter, obviously improve the activity and carbon formation resistance of Ni/γ-Al2O3 catalyst, and Yb-Ni catalyst shows even higher performance than several commercial catalysts. According to the characterization results, Yb promoter enhances the interaction between the active metal and support, thus increasing the active metal＇s dispersion and improving its performance. Furthermore, the obvious difference in diesel conversion between Yb-Ni catalyst and others was shown in the temperature range of 450-550 °C, which would be the reason for its excellent carbon resistance.

Corrosion rate determination of rare-earth Mg alloys in a Na_(2)SO_(4)solution by electrochemical measurements and inductive coupled plasma-optical emission spectroscopy

The corrosion resistance of three Mg alloys containing rare-earth elements(WE43,EV31 and ZE41)was studied and compared to that of two Mg-Al alloys(AZ31 and AZ91)and of pure Mg(99.95 wt.%).Current-voltage curves and electrochemical impedance measurements were performed with rotating disk electrodes in an aerated 0.1 M Na_(2)SO_(4)solution.For all the alloys,it was confirmed that the intermetallic particles acted as local cathodes and that more protective films were formed on the alloys surface by comparison with the pure Mg.Corrosion rates were determined from inductive coupled plasma-optical emission spectroscopy measurements and from the electrochemical measurements.Higher corrosion rates were observed for the rare-earth Mg alloys compared to the AZ series alloys.These data allowed the corrosion mechanisms to be discussed.

Geochemical characteristics and their significances of rare-earth elements in deep-water well core at the Lingnan Low Uplift Area of the Qiongdongnan Basin

A geochemical analysis of rare-earth elements （REEs） in 97 samples collected from the core of deep-water Well LS-A located at the Lingnan Low Uplift Area of the Qiongdongnan Basin is conducted, with the pur-pose of revealing the changes of sedimentary source and environment in the study region since Oligocene and evaluating the response of geochemical characteristics of REEs to the tectonic evolution. In the core samples, both∑REE and∑LREE （LREE is short for light-group REEs） fluctuate in a relatively wide range, while∑HREE （HREE is short for heavy-group REEs） maintains a relatively stable level. With the stratigraphic chronology becoming newer, both∑REE and∑LREE show a gradually rising trend overall. The∑REE of the core is relatively high from the bottom of Yacheng Formation （at a well depth of 4 207 m） to the top of Ledong Formation, and the REEs show partitioning characteristics of the enrichment of LREE, the stable content of HREE, and the negative anomaly of Eu to varying degrees. Overall the geochemical characteristics of REEs are relatively approximate to those of China＇s neritic sediments and loess, with significant ＂continental ori-entation＂. The∑REE of the core is relatively low in the lower part of Yacheng Formation （at a well depth of 4 207-4 330 m）, as shown by the REEs partitioning characteristics of the depletion of LREE, the relative enrich-ment of HREE, and the positive anomaly of Eu; the geochemical characteristics of REEs are approximate to those of oceanic crust and basalt overall, indicating that the provenance is primarily composed of volcanic eruption matters. As shown by the analyses based on sequence stratigraphy and mineralogy, the provenance in study region in the early Oligocene mainly resulted from the volcanic materials of the peripheral uplift ar-eas; the continental margin materials from the north contributed only insignificantly; the provenance devel-oped to a certain extent in the late Oligocene. Since the Miocene, the provenance has ceaselessly expanded from proximal to distal realm, embodying a characteristic of multi-source sedimentation. In the core strata with 31.5, 28.4, 25.5, 23, and 16 Ma from today, the geochemical parameters of REEs and Th/Sc ratio have significant saltation, embodying the tectonic movement events in the evolution of the Qiongdongnan Basin. In the tectonic evolution history of the South China Sea, the South China Sea Movement （34-25 Ma BP, early expansion of the South China Sea）, Baiyun Movement （23 Ma BP）, late expansion movement （23.5-16.5 Ma BP）, expansion-settlement transition, and other important events are all clearly recorded by the geochemi-cal characteristics of REEs in the core.

Self-aldol condensation of aldehydes over Lewis acidic rare-earth cations stabilized by zeolites

The self-aldol condensation of aldehydes was investigated with rare-earth cations stabilized by[Si]Beta zeolites in parallel with bulk rare-earth metal oxides.Good catalytic performance was achieved with all Lewis acidic rare-earth cations stabilized by zeolites and yttrium appeared to be the best metal choice.According to the results of several complementary techniques,i.e.,temperature-programmed surface reactions,in situ diffuse reflectance infrared Fourier transform spectroscopy,ultraviolet-visible diffuse reflectance spectroscopy,the reaction pathway and mechanism of the aldehyde self-aldol condensation over Y/Beta catalyst were studied in more detail.Density functional theory calculations revealed that aldol dehydration was the rate-limiting step.The hydroxyl group at the open yttrium site played an important role in stabilizing the transition state of the aldol dimer reducing the energy barrier for its hydration.Lewis acidic Y(OSi)(OH)2 stabilized by zeolites in open configurations were identified as the preferred active sites for the self-aldol condensation of aldehydes.

Rare-earth and trace elements and hydrogen and oxygen isotopic compositions of Cretaceous kaolinitic sediments from the Lower Benue Trough, Nigeria: provenance and paleoclimatic significance

This study evaluated the Cretaceous(Campanian–Maastrichtian) kaolinitic sediments of the Ajali/Mamu and Enugu/Nkporo Formations from the Lower Benue Trough of Nigeria. A combined method of inductively coupled plasma–mass spectrometry and isotope ratio mass spectrometry was used to investigate trace and rareearth element geochemistry and hydrogen and oxygen isotopic compositions. These data were then used to infer the sediments' provenance and paleoclimatic conditions during their deposition. The sediments contained low concentrations of most trace elements, with the exceptions of Zr(651–1352 ppm), Ba(56–157 ppm), V(38–90 ppm),and Sr(15.1–59.6 ppm). Average values of Co and Ni were1.5 and 0.7 ppm, respectively. Trace and rare earth element values were lower than corresponding values for upper continental crust and Post-Archean Australian Shale, with the exception of Zr. The samples showed only slight light rare-earth enrichment and nearly flat heavy rare-earth depletion patterns, with negative Eu and Tm anomalies,typical of felsic sources. Geochemical parameters such as La/Sc, Th/Sc, and Th/Co ratios support that the kaolinitic sediments were derived from a felsic rock source, likely deposited in an oxic environment.^(18 )O values ranged from+ 15.4 to + 21.2% for the investigated samples, consistent with a residual material derived from chemicalweathering of felsic rock and redeposited in a sedimentary basin(typical values of + 19 to + 21.2%). While in the basin, the sediments experienced extended interactions with meteoric water enriched in d D and d16 O. However,the variation in d D and d16 O values for the investigated samples is attributed to the high temperature of formation(54–91 °C). The d D and d^(18 )O values suggest that the sediments, although obtained from different localities within the Lower Benue Trough, formed under similar hot,tropical climatic conditions.

Mechanism of interaction relation between the rare-earth element Ce and impurity elements Pb and Bi in Ag-based filler metal

The mechanism of interaction relation between the rare-earth element Ce and elements Pb and Bi in Ag-based filler metal has been studied. The results show that the compounds CePb and CeBi with high melting point can be easily produced between these three elements in the filler metal, which greatly limited the formation of the isolated phase Pb or Bi and also eliminated the bad effect of impurity elements Pb and Bi on the spreading property of Ag-based filler metal. The metallurgical and quantum-mechanical bond formation analysis show that a strong chemical affinity was existed between the rare-earth element Ce and impurity elements Pb and Bi, which was proved by the XRD analysis results.