Humic Acid Effects on Reducing Corn Leaf Burn Caused by Foliar Spray of Urea-Ammonium Nitrate at Different Humic Acid/Urea-Ammonium Nitrate Ratios

Technologies for reducing corn leaf burn caused by foliar spray of urea-ammonium nitrate (UAN) during the early growing season are limited. A field experiment was carried out to evaluate the effects of humic acid on corn leaf burn caused by foliar spray of undiluted UAN solution on corn canopy at Jackson, TN in 2018. Thirteen treatments of the mixtures of UAN and humic acid were evaluated at V6 of corn with different UAN application rates and different UAN/humic acid ratios. Leaf burn during 1 2, 3, 4, 5, 6, 7, and 14 days after UAN foliar spray significantly differed between with or without humic acid addition. The addition of humic acid to UAN significantly reduced leaf burn at each UAN application rate (15, 25, and 35 gal/acre). The reduction of leaf burn was enhanced as the humic acid/UAN ratio went up from 10% to 30%. Leaf burn due to foliar application of UAN became severer with higher UAN rates. The linear regression of leaf burn 14 days after application with humic acid/UAN ratio was highly significant and negative. However, the linear regression of leaf burn 14 days after application with the UAN application rate was highly significant and positive. In conclusion, adding humic acid to foliar-applied UAN is beneficial for reducing corn leaf burn during the early growing season.

Predictive Value of Blood Pressure,Heart Rate,and Blood Pressure/Heart Rate Ratio in a Chinese Subpopulation with Vasovagal Syncope

Objective:The head-up tilt test(HUTT)is widely used but is time-consuming and not cost-effective to evaluate patients with vasovagal syncope(VVS).The present study aims to verify the hypothesis that ambulatory blood pressure(BP)monitoring(ABPM)and the simplistic tilt test may be potential alternatives to the HUTT.Methods:The study consecutively enrolled 360 patients who underwent the HUTT to evaluate VVS.BP),heart rate(HR),and BP/HR ratios derived from ABPM and the simplistic tilt test were evaluated to predict the presence,pattern,and stage of syncope during the HUTT.Results:Mixed response was the commonest pattern,and syncope occurred frequently with infusion of isoproterenol at a rate of 3μg/min.During the simplistic tilt test,the cardioinhibitory group had higher tilted BP/HR ratios than the vasodepressor group,while the vasodepressor group had a faster tilted HR and a larger HR difference than the cardioinhibitory group.The higher the BP/HR ratio in the tilted position,the higher the isoproterenol dosage needed to induce a positive response.During ABPM,BP/HR ratios were signifi cantly higher in the cardioinhibitory group than in the vasodepressor group.The higher the ABPM-derived BP,the higher the dosage of isoproterenol needed to induce syncope.There were signifi cant correlations in BP/HR ratios between ABPM and the supine position in the vasodepressor group,while signifi cant correlation was found only for the diastolic BP/HR ratio between ABPM and the tilted position in the cardioinhibitory group.The mixed pattern shared correlative features of the other two patterns.Conclusion:ABPM and the simplistic tilt test might be used as promising alternatives to the HUTT in VVS evaluation in clinical settings.

Investigation on the deposition rate and the dilution ratio of plasma surface welding

A new kind of plasma technology with both high deposition rate and low dilution ratio was developed under the calculation and analysis of the arc flame characteristics of plasma arc,the kinematics behavior of powder and powder's heating in the arc. Compared with normal plasma surfacing method, the idea using constricting nozzle with small orifice diameter, long plasma arc and increasing the distance from meeting point of the two beams of powder to workpiece, to achieve the goals of high deposition rate and low dilution ratio, was put forward here. In order to prove this idea, a set of experimental system was built up and obtained satisfied results including high deposition rate(more than 25 kg/h )and low dilution ratio(less than 5%). The success of this study offers a promising prospect for developing the powder plasma surface welding in China and may open a way to improve this technology further in efficiency and quality.

Effects of soil nitrate:ammonium ratio on plant carbon:nitrogen ratio and growth rate of Artemisia sphaerocephala seedlings

Can soil nitrate： ammonium ratios influence plant carbon： nitrogen ratios of the early succession plant？ Can plant carbon： nitrogen ratios limit the plant growth in early succession？ To address these two questions, we performed a two-factor （soil nitrate： ammonium ratio and plant density） randomized block design and a uniform-precision rotatable central composite design pot experiments to examine the relationships between soil nitrate： ammonium ratios, the carbon： nitrogen ratios and growth rate of Artemisia sphaerocephala seedlings. Under adequate nutrient status, both soil nitrate： ammonium ratios and plant density influenced the carbon： nitrogen ratios and growth rate of A. sphaerocephala seedlings. Under the lower soil nitrate： ammonium ratios, with the increase of soil nitrate： ammonium ratios, the growth rates of plant height and shoot biomass of A. sphaerocephala seedlings decreased significantly; with the increase of plant carbon： nitrogen ratios, the growth rates of shoot biomass of A. sphaerocephala seedlings decreased significantly. Soil nitrate： ammonium ratios affected the carbon： nitrogen ratios of A. sphaerocephala seedlings by plant nitrogen but not by plant carbon. Thus, soil nitrate： ammonium ratios influenced the carbon： nitrogen ratios of A. sphaerocephala seedlings, and hence influenced its growth rates. Our results suggest that under adequate nutrient environment, soil nitrate： ammonium ratios can be a limiting factor for the growth of the early succession plant.

Comparison of the S-, N- or P-Deprivations’ Impacts on Stomatal Conductance, Transpiration and Photosynthetic Rate of Young Maize Leaves

Seven-day-old maize (Zea mays) plants were grown hydroponically for ten days in deprived nutrient solutions against the corresponding control grown under full nutrition;the effects of S-, N- or P-deprivation on laminas’ mean stomatal conductance (gs), transpiration rate (E) and photosynthetic rate (A) were monitored, along with the impact on the laminas’ total dry mass (DM), water amount (W), length and surface area (Sa). Furthermore, a time series analysis of each parameter’s response ratios (Rr), i.e. the treatment’s value divided by the corresponding control’s one, was performed. Under S-deprivation, the Rr of laminas’ mean gs, E, and A presented oscillations within a ±15% fluctuation zone, notably the “control” zone, whilst those of laminas’ total DM, water amount, surface area, and length included oscillation during the first days and deviation later on, presenting deviation during d10. Under the N-deprivation conditions all Rr time courses except the A one, included early deviations from the control zone without recovering. The deviation from the control zone appeared at d4. Under P-deprivation, all Rr time courses represented oscillations within the control zone. P-deprivation’s patterns resembled those of S-deprivation. Compared to the one of the S-deprivation, the P-one’s oscillations took place within a broader zone. Linear relationships among the various Rr patterns were found between gs-E, gs-A, E-A, DM-W and DM-Sa. In conclusion, the impact of P-deprivation appeared in an early stage and included an alleviation action, the one of N-deprivation appeared early with no alleviation action, whilst that of S-deprivation appeared later, being rather weaker when compared to the impact of the P-deprivation’s impact.

Distribution Profiles and Interrelations of Stomatal Conductance, Transpiration Rate and Water Dynamics in Young Maize Laminas under Nitrogen Deprivation

Seven-day-old maize (Zea mays) plants were grown hydroponically for ten days in N-deprived nutrient solution. The distribution profiles according to the position on the stem of the –N laminas stomatal conductance, transpiration rate, photosynthetic rate (1st-group) were monitored, along with the corresponding profiles of dry mass, water amount, water content, length, surface area, and specific surface area (2nd-group), relative to control. In the uppermost –N laminas, the changes within a parameter of the 1st-group were significantly higher and of the 2nd-group significantly lower than the control, respectively. Correlations of the corresponding values among the parameters of the 1st-or 2nd-group were linear. The parameters between groups correlated non-linearly. Transpiration rate was divided by the lamina’s dry mass correlated with surface area in a power-type function. The slopes of the response ratios linear relations between the various pairs of parameters could be used for simulation of a lamina’s response to the deprivation.

Ultrasound hepatic/renal ratio and hepatic attenuation rate for quantifying liver fat content

AIM:To establish and validate a simple quantitative assessment method for nonalcoholic fatty liver disease(NAFLD)based on a combination of the ultrasound hepatic/renal ratio and hepatic attenuation rate.METHODS:A total of 170 subjects were enrolled in this study.All subjects were examined by ultrasound and 1H-magnetic resonance spectroscopy(1H-MRS)on the same day.The ultrasound hepatic/renal echointensity ratio and ultrasound hepatic echo-intensity attenuation rate were obtained from ordinary ultrasound images using the MATLAB program.RESULTS:Correlation analysis revealed that the ultrasound hepatic/renal ratio and hepatic echo-intensity attenuation rate were significantly correlated with 1HMRS liver fat content(ultrasound hepatic/renal ratio:r=0.952,P=0.000;hepatic echo-intensity attenuation r=0.850,P=0.000).The equation for predictingliver fat content by ultrasound(quantitative ultrasound model)is:liver fat content(%)=61.519×ultrasound hepatic/renal ratio+167.701×hepatic echo-intensity attenuation rate-26.736.Spearman correlation analysis revealed that the liver fat content ratio of the quantitative ultrasound model was positively correlated with serum alanine aminotransferase,aspartate aminotransferase,and triglyceride,but negatively correlated with high density lipoprotein cholesterol.Receiver operating characteristic curve analysis revealed that the optimal point for diagnosing fatty liver was 9.15%in the quantitative ultrasound model.Furthermore,in the quantitative ultrasound model,fatty liver diagnostic sensitivity and specificity were 94.7%and 100.0%,respectively,showing that the quantitative ultrasound model was better than conventional ultrasound methods or the combined ultrasound hepatic/renal ratio and hepatic echo-intensity attenuation rate.If the 1H-MRS liver fat content had a value<15%,the sensitivity and specificity of the ultrasound quantitative model would be 81.4%and 100%,which still shows that using the model is better than the other methods.CONCLUSION:The quantitative ultrasound model is a simple,low-cost,and sensitive tool that can accurately assess hepatic fat content in clinical practice.It provides an easy and effective parameter for the early diagnosis of mild hepatic steatosis and evaluation of the efficacy of NAFLD treatment.

Global Analysis of an SEIR Epidemic Model with a Ratio-Dependent Nonlinear Incidence Rate

In this paper, a SEIR model with ratio-dependent transmission rate in the form ?is studied and the basic reproduction number which determines the disease’s extinction or continued existence is obtained. By constructing the proper Lyapunov function, we prove that if R0 ≤ 1, the disease-free equilibrium point of the model is globally asymptotically stable and the disease always dies out;if R0 > 1, the endemic equilibrium point is globally asymptotically stable and the disease persists.

Effects of N Application Rates and NO_3-N to NH_4-N Ratios on Yield and Quality of Flue-cured Tobacco Planted in Black Soil

A field experiment about effects of nitrogen application rates and different NO3-N to NH4-N ratios on agronomic, chemical and biological characteristics as well as yield and quality of flue-cured tobacco grown in a black soil was conducted from 2004 to 2005 in Heilongjiang Province. The results showed that the nitrogen application rates at 45 kg·hm^-2 with the ratio of 75% NO3-N to 25% NH4-N resulted in the highest potassium and reducing sugar contents in the flue-cured tobacco leaving with the highest quality grade and value. It is recommended that this ni- trogen application rate and NO3-N to NH4-N ratio should be widely applied on flue-cured tobacco grown in the black soil in Heilongjiang Province.

Experimental research on the mixed sand ratio and initial dry density of weathered sand improved expansive soil free load swelling rate

In this paper, through the indoor free load swelling rate test, expansive soil in a section of a first- class highway reconstruction project in Yichang City was studied. It emphatically analyzed the interrelations among free load swelling rate, non-load time, the proportion of mixed sand and initial dry density. Experimen- tal studies have shown that： Free load swelling deformation is mainly divided into three stages of rapid expan- sion, slow expansion and final stability; when the initial dry density is constant, free load swelling rate of the weathered sand modified soil will reduce rapidly before they slow down with the increase of sand proportion, and weathered sand modified soil free load swelling rate is not sensitive to the large amount of sand mixed; in the same mixed sand ratio, weathered sand modified soil free load swelling rate increases rapidly with the in- crease of initial dry density, there is a good linear correlation between them. To take appropriate control of the initial dry density during the expansive soil subgrade construction helps to reduce its swelling deformation and ensures the stability of the embankment.

GFRP筋再生混凝土梁受弯承载力研究

为研究GFRP筋再生混凝土梁(GFRP-RAC)的受弯承载力,完成了5根配GFRP筋、1根配BFRP筋和1根配钢筋的再生混凝土梁抗弯试验,分析了不同再生骨料取代率、纵筋类型以及纵筋配筋率等因素对各试验梁开裂荷载和极限承载力的影响。结果表明:再生骨料取代率对开裂荷载的影响较大,而纵筋类型及纵筋配筋率对其影响不明显;当再生骨料取代率由0增加至50%和100%时,试验梁开裂荷载分别减小了7.9%和17.3%;极限承载力受再生骨料取代率影响较小而受纵筋配筋率影响较大,当GFRP-RAC梁纵筋配筋率由0.38%提高至0.6%和1.17%时,极限荷载分别提升了17.9%和52.5%。另外,结合国内外规范对GFRP-RAC梁的受弯承载力进行对比分析,并基于试验数据和相关试验结果的回归分析,得到开裂荷载修正系数αcr,开裂荷载修正后的计算值与试验值吻合较好。

堆石混凝土绝热温升曲线特征及速率模型

为了探究堆石混凝土温升机制,对6种不同堆石率、3种不同初始浇筑温度、3种不同堆石级配的堆石混凝土进行绝热温升试验。分析堆石率、初始浇筑温度、堆石级配对堆石混凝土绝热温升和温升速率曲线的影响规律。并在绝热温升规律的基础上,提出一种通用的堆石混凝土绝热温升速率模型,用于描述绝热温升速率随龄期的变化规律。绝热温升速率模型简单,对堆石混凝土绝热温升和温升速率的描述具有较好的效果。研究结果为建立混凝土绝热温升模型奠定了基础,并有望推动通过动力学研究分析堆石混凝土的温升机理。

Acquisition Practice of High Signal-to-Noise Ratio in YTB Block of Sichuan Basin

YTB block in Sichuan basin is a favorable area to exploit oil and gas in shallow tight rock. 3D seismic project of this zone has two characteristics. Firstly, it has high requirements for the tolerance rate of the construction process and the acquisition of high signal-to-noise ratio seismic data;Second, there are widely obstacles and noises that lead to difficult acquisition construction organization. In acquisition practice, high signal-to-noise ratio seismic data was obtained by reasonable design of construction scheme, optimization of excitation parameters, improvement of receiving conditions and optimization of obstacle crossing observation system. .

基于工程应用的CW-GMAW熔滴过渡形态表征

综述了涉及工程应用的冷丝熔化极气体保护焊(Cold wire gas metal arc welding,CW-GMAW)熔滴过渡形态特征。结果表明,在大电流、强规范、富氩混合气体保护下,CW-GMAW工艺的熔滴过渡形态呈喷射过渡;当电流较小、电弧电压较低时,可能为滴状过渡,甚至在弧压很低时,呈现短路过渡形态。该工艺电弧发生偏向冷丝的位移,弧长变短甚至发生短路,与冷丝送进速率比增高及冷丝在电弧中产生大量金属蒸气时弧柱电阻下降有关。在具有富氩混合保护气体的相同工艺参数下,CWGMAW转变电流比GMAW降低了4%~7%。焊接工艺参数对CW-GMAW和GMAW工艺熔滴过渡形态的影响规律大致相近,但前者因涉及冷丝送进速率比和电极焊丝送进速度,以及它们的匹配等,使焊接电流的影响更为复杂。

基于管柱动力学的特深井通井组合刚度评价方法与应用

我国特深井钻井正处于快速发展阶段,受井眼尺寸大和深度深的影响,钻井过程中极易出现微井斜、扩径缩径和井壁台阶等,导致套管下入困难,因此通井钻具组合评价尤为重要。目前,现场使用的评价方法常忽略了管柱下入过程中与井壁的碰撞和变形,导致通井效果时好时坏。为了辅助现场施工,文章基于全井管柱动力学模型和HHT-α数值计算方法提出了一种能够模拟管柱下入的动态过程的通井钻具组合的评价方法,该方法考虑了实测井眼轨迹、井眼扩大率和下入阻力等要素。通过某特深井三开下套管前的钻具组合进行实例计算分析,表明井眼扩大率和套管串下入阻力对通井能力和套管下入影响较大,当井眼扩大率较小且套管串下入阻力较大时,需要使用刚度较大的多扶正器通井钻具组合。本方法可以实现实测井况条件下比较精准的刚度对比模拟,也成功指导了案例井?486 mm套管的安全下入。

重力参数对非阻塞性颗粒阻尼减振特性的影响

针对非阻塞性颗粒阻尼(Non-obstructive Particle Damping,NOPD)在微重力、超重及离心等非常态环境中减振效果较差的问题,采用重力加速度表征这些非常态物理环境,利用离散元法(Discrete Element Method,DEM)研究重力参数对NOPD减振特性的影响,同时还分析NOPD最优填充比及最优粒径比等结构参数在不同重力条件下的变化规律。研究表明,重力加速度在0.7~1.0 g之间时NOPD减振效果最好。在微重力环境下,当重力参数变化时,NOPD最优填充比为0.85,最优粒径比为0.45。而当重力加速度大于1 g时,NOPD最优填充比及最优粒径比均随重力加速度的增加而减小,且其最优范围也均有所扩大。

透水混凝土力学性能影响因素的研究进展与分析

为保证工程建设的安全性和有效性,充分了解不同因素对透水混凝土力学性能的影响机理,总结了近年来国内外关于水灰比、砂率、掺合料种类及掺量、骨料粒径等因素对透水混凝土力学性能影响的研究成果,分析了现有研究中存在的不足和尚未解决的问题,并基于透水混凝土细观损伤机理和力学行为,指出了未来进一步研究方向。

气体流量和喷嘴直径对鼓泡塔内气泡大小和形状分布的影响

通过高速摄影结合图像处理算法,研究气体流量和喷嘴直径对气泡尺寸和纵横比分布的影响。结果表明,在所有喷嘴直径下,气泡当量直径的概率密度呈现双峰分布,其中第一个峰值接近直径为1.5~2 mm的小气泡区域,另一个峰值位于较大的气泡区域。将气体流量从0.1 L/min增加到0.2 L/min会导致大气泡的概率密度更高,表明气泡聚并现象普遍存在。当气体流量增加至1.2L/min时,峰值对应的气泡直径变小,并且气泡破裂占主导地位。对于直径为1~2 mm的气泡,形状受气体流量的影响较小,而3~9 mm的气泡在所有气体流量下气泡纵横比概率密度分布的峰值均位于纵横比E=0.5处。Iguchi和Chihara提出的模型能更好地预测气泡脱离直径随气体流量的增大的变化。