The Laguerre polynomial method has been successfully used to investigate the dynamic responses of a half-space.However,it fails to obtain the correct stress at the interfaces in a layered half-space,especially when th...The Laguerre polynomial method has been successfully used to investigate the dynamic responses of a half-space.However,it fails to obtain the correct stress at the interfaces in a layered half-space,especially when there are significant differences in material properties.Therefore,a coupled Legendre-Laguerre polynomial method with analytical integration is proposed.The Rayleigh waves in a one-dimensional(1D)hexagonal quasicrystal(QC)layered half-space with an imperfect interface are investigated.The correctness is validated by comparison with available results.Its computation efficiency is analyzed.The dispersion curves of the phase velocity,displacement distributions,and stress distributions are illustrated.The effects of the phonon-phason coupling and imperfect interface coefficients on the wave characteristics are investigated.Some novel findings reveal that the proposed method is highly efficient for addressing the Rayleigh waves in a QC layered half-space.It can save over 99%of the computation time.This method can be expanded to investigate waves in various layered half-spaces,including earth-layered media and surface acoustic wave(SAW)devices.展开更多
The ratio between vertical and radial amplitudes of Rayleigh waves(hereafter,the Rayleigh wave ZH ratio)is an important parameter used to constrain structures beneath seismic stations.Some previous studies have explor...The ratio between vertical and radial amplitudes of Rayleigh waves(hereafter,the Rayleigh wave ZH ratio)is an important parameter used to constrain structures beneath seismic stations.Some previous studies have explored crust and upper mantle structures by joint inversion of the Rayleigh wave ZH ratio and surface wave dispersion.However,all these studies have used a 1-D depth sensitivity kernel,and this kernel may lack precision when the structure varies a great deal laterally.Here,we present a systematic investigation of the two-dimensional(2-D)Rayleigh wave ZH ratio kernel based on the adjoint-wavefield method and perform two synthetic tests using the new kernel.The 2-D ZH ratio kernel is consistent with the traditional 1-D sensitivity kernel but has an asymmetric pattern with a preferred orientation toward the source.The predominant effect caused by heterogeneity can clearly be seen from kernels calculated from models with 2-D heterogeneities,which confirms the necessity of using the new 2-D kernel in some complex regions.Inversion tests using synthetic data show that the 2-D ZH ratio kernel has the potential to resolve small anomalies as well as complex lateral structures.展开更多
In order to increase the exploration depth of Rayleigh wave, new idea that dif-ferent from the former principles in data acquisition was applied. Suitable data acquisition parameter was given out on the basis of large...In order to increase the exploration depth of Rayleigh wave, new idea that dif-ferent from the former principles in data acquisition was applied. Suitable data acquisition parameter was given out on the basis of large amount of experiments. By reducing the group interval, the low frequency signal are enhanced instead of been attenuated. Fur-thermore, to solve the problem that the precision of Rayleigh wave exploration method count much to the signal-to-noise ratio, some preprocessing methods were put forward. By using zero shift rectifying, digital F-K filtering and cutting, noises can be effectively eliminated.展开更多
This paper concerns the calculation of wave height exceedance probabilities for nonlinear irregular waves in transitional water depths, and a Transformed Rayleigh method is first proposed for carrying out the calculat...This paper concerns the calculation of wave height exceedance probabilities for nonlinear irregular waves in transitional water depths, and a Transformed Rayleigh method is first proposed for carrying out the calculation. In the proposed Transformed Rayleigh method, the transformation model is chosen to be a monotonic exponential function, calibrated such that the first three moments of the transformed model match the moments of the true process. The proposed new method has been applied for calculating the wave height exceedance probabilities of a sea state with the surface elevation data measured at the Poseidon platform. It is demonstrated in this case that the proposed new method can offer better predictions than those by using the conventional Rayleigh wave height distribution model. The proposed new method has been further applied for calculating the total horizontal loads on a generic jacket, and its accuracy has once again been substantiated. The research findings gained from this study demonstrate that the proposed Transformed Rayleigh model can be utilized as a promising alternative to the well-established nonlinear wave height distribution models.展开更多
Impulsive line load in a half-space (Lamb’s problem) can be solved with a closed form solution. This solution is helpful for understanding the phenomenon of Rayleigh’s waves. In this article, we use a boundary eleme...Impulsive line load in a half-space (Lamb’s problem) can be solved with a closed form solution. This solution is helpful for understanding the phenomenon of Rayleigh’s waves. In this article, we use a boundary element method to simulate the solution of an elastic solid with a curved free surface under impact loading. This problem is considered difficult for numerical methods. Lamb’s problem is calculated first to verify the method. Then the method is applied on the problems with different surface curvatures. The method simulates the phenomenon of Rayleigh’s wave propagating on a curved surface very well. The results are shown in figures.展开更多
板结构与其他构件的装配关系可用不同的边界条件进行模拟,然而针对不同边界条件的板结构进行动力学特性分析,目前缺乏统一的数学建模方法。以混合弹性边界条件下加筋、开孔的板类结构的横向振动为例,利用Rayleigh-Ritz法和模态叠加法求...板结构与其他构件的装配关系可用不同的边界条件进行模拟,然而针对不同边界条件的板结构进行动力学特性分析,目前缺乏统一的数学建模方法。以混合弹性边界条件下加筋、开孔的板类结构的横向振动为例,利用Rayleigh-Ritz法和模态叠加法求解矩形加筋多孔板在简谐激励下的动力学响应问题。采用将开孔板与加强筋沿交界面进行分离,结合改进的傅里叶级数设定开孔板的横向振动位移函数,利用不同刚度弹簧模拟混合弹性边界,推导加筋矩形开多孔板和边界弹簧系统的动能与势能,求解其在简谐激励下的动力学响应。经对比,理论计算结果与有限元(Finite Element Method,FEM)结果吻合良好。此外,用同样的方法分析不同孔尺寸对结构固有频率和响应的影响。研究发现,可通过改变加筋板的开孔形状、尺寸对结构的振动特性进行调整。研究成果可为混合弹性边界板结构动力分析提供一种新的技术途径,可以简化加筋开孔板结构动力分析的步骤。展开更多
基金Project supported by the National Natural Science Foundation of China(No.12102131)the Natural Science Foundation of Henan Province of China(No.242300420248)the International Science and Technology Cooperation Project of Henan Province of China(No.242102521010)。
文摘The Laguerre polynomial method has been successfully used to investigate the dynamic responses of a half-space.However,it fails to obtain the correct stress at the interfaces in a layered half-space,especially when there are significant differences in material properties.Therefore,a coupled Legendre-Laguerre polynomial method with analytical integration is proposed.The Rayleigh waves in a one-dimensional(1D)hexagonal quasicrystal(QC)layered half-space with an imperfect interface are investigated.The correctness is validated by comparison with available results.Its computation efficiency is analyzed.The dispersion curves of the phase velocity,displacement distributions,and stress distributions are illustrated.The effects of the phonon-phason coupling and imperfect interface coefficients on the wave characteristics are investigated.Some novel findings reveal that the proposed method is highly efficient for addressing the Rayleigh waves in a QC layered half-space.It can save over 99%of the computation time.This method can be expanded to investigate waves in various layered half-spaces,including earth-layered media and surface acoustic wave(SAW)devices.
基金This study was funded by the National Key R&D Program of China(2016YFC0600301,2018YFC1503400)the National Natural Science Foundation of China(41790464)+1 种基金Natural Science Foundation of Jiangsu Province of China(BK20190499)the Fundamental Research Funds for the Central Universities(2019B0071428).
文摘The ratio between vertical and radial amplitudes of Rayleigh waves(hereafter,the Rayleigh wave ZH ratio)is an important parameter used to constrain structures beneath seismic stations.Some previous studies have explored crust and upper mantle structures by joint inversion of the Rayleigh wave ZH ratio and surface wave dispersion.However,all these studies have used a 1-D depth sensitivity kernel,and this kernel may lack precision when the structure varies a great deal laterally.Here,we present a systematic investigation of the two-dimensional(2-D)Rayleigh wave ZH ratio kernel based on the adjoint-wavefield method and perform two synthetic tests using the new kernel.The 2-D ZH ratio kernel is consistent with the traditional 1-D sensitivity kernel but has an asymmetric pattern with a preferred orientation toward the source.The predominant effect caused by heterogeneity can clearly be seen from kernels calculated from models with 2-D heterogeneities,which confirms the necessity of using the new 2-D kernel in some complex regions.Inversion tests using synthetic data show that the 2-D ZH ratio kernel has the potential to resolve small anomalies as well as complex lateral structures.
文摘In order to increase the exploration depth of Rayleigh wave, new idea that dif-ferent from the former principles in data acquisition was applied. Suitable data acquisition parameter was given out on the basis of large amount of experiments. By reducing the group interval, the low frequency signal are enhanced instead of been attenuated. Fur-thermore, to solve the problem that the precision of Rayleigh wave exploration method count much to the signal-to-noise ratio, some preprocessing methods were put forward. By using zero shift rectifying, digital F-K filtering and cutting, noises can be effectively eliminated.
基金financially supported by the Chinese State Key Laboratory of Ocean Engineering,Shanghai Jiao Tong University(Grant No.GKZD010038)
文摘This paper concerns the calculation of wave height exceedance probabilities for nonlinear irregular waves in transitional water depths, and a Transformed Rayleigh method is first proposed for carrying out the calculation. In the proposed Transformed Rayleigh method, the transformation model is chosen to be a monotonic exponential function, calibrated such that the first three moments of the transformed model match the moments of the true process. The proposed new method has been applied for calculating the wave height exceedance probabilities of a sea state with the surface elevation data measured at the Poseidon platform. It is demonstrated in this case that the proposed new method can offer better predictions than those by using the conventional Rayleigh wave height distribution model. The proposed new method has been further applied for calculating the total horizontal loads on a generic jacket, and its accuracy has once again been substantiated. The research findings gained from this study demonstrate that the proposed Transformed Rayleigh model can be utilized as a promising alternative to the well-established nonlinear wave height distribution models.
文摘Impulsive line load in a half-space (Lamb’s problem) can be solved with a closed form solution. This solution is helpful for understanding the phenomenon of Rayleigh’s waves. In this article, we use a boundary element method to simulate the solution of an elastic solid with a curved free surface under impact loading. This problem is considered difficult for numerical methods. Lamb’s problem is calculated first to verify the method. Then the method is applied on the problems with different surface curvatures. The method simulates the phenomenon of Rayleigh’s wave propagating on a curved surface very well. The results are shown in figures.
文摘板结构与其他构件的装配关系可用不同的边界条件进行模拟,然而针对不同边界条件的板结构进行动力学特性分析,目前缺乏统一的数学建模方法。以混合弹性边界条件下加筋、开孔的板类结构的横向振动为例,利用Rayleigh-Ritz法和模态叠加法求解矩形加筋多孔板在简谐激励下的动力学响应问题。采用将开孔板与加强筋沿交界面进行分离,结合改进的傅里叶级数设定开孔板的横向振动位移函数,利用不同刚度弹簧模拟混合弹性边界,推导加筋矩形开多孔板和边界弹簧系统的动能与势能,求解其在简谐激励下的动力学响应。经对比,理论计算结果与有限元(Finite Element Method,FEM)结果吻合良好。此外,用同样的方法分析不同孔尺寸对结构固有频率和响应的影响。研究发现,可通过改变加筋板的开孔形状、尺寸对结构的振动特性进行调整。研究成果可为混合弹性边界板结构动力分析提供一种新的技术途径,可以简化加筋开孔板结构动力分析的步骤。
