Monomeric C-reactive protein:a link between chronic inflammation and neurodegeneration?

Pre-diabetic insulin resistance is associated with sub-clinical inflammation and concomitant increase in systemic C-reactive protein(CRP)levels.Type 2 diabetes mellitus(T2DM)patients register even higher chronic levels of inflammation,with excess circulating CRP originating from both typical hepatic synthesis,and also visceral white adipose tissue.

软件定义网络Reactive交换模式IP转发效率研究

现代计算机网络技术发展迅速,SDN具有转发与控制分离、应用灵活多变、适应性强等特点,已逐渐被IT厂商和电信运营商所接纳并采用,但SDN作为一种发展中的技术很多方面还有待完善。本文首先将IP层相关协议的通信过程进行了分析,然后针对SDN的Reactive交换机模式将这些协议的通信效率与以太网进行了对比。实验与分析表明,在地址解析、连通性测试和数据传输等基本网络行为中,SDN的Reactive交换模式效率并不占据优势,需要进一步优化。

Enhanced structural damage behavior of liquid-filled tank by reactive material projectile impact

A series of ballistic experiments were performed to investigate the damage behavior of high velocity reactive material projectiles(RMPs) impacting liquid-filled tanks,and the corresponding hydrodynamic ram(HRAM) was studied in detail.PTFE/Al/W RMPs with steel-like and aluminum-like densities were prepared by a pressing/sintering process.The projectiles impacted a liquid-filled steel tank with front aluminum panel at approximately 1250 m/s.The corresponding cavity evolution characteristics and HRAM pressure were recorded by high-speed camera and pressure acquisition system,and further compared to those of steel and aluminum projectiles.Significantly different from the conical cavity formed by the inert metal projectile,the cavity formed by the RMP appeared as an ellipsoid with a conical front.The RMPs were demonstrated to enhance the radial growth velocity of cavity,the global HRAM pressure amplitude and the front panel damage,indicating the enhanced HRAM and structural damage behavior.Furthermore,combining the impact-induced fragmentation and deflagration characteristics,the cavity evolution of RMPs under the combined effect of kinetic energy impact and chemical energy release was analyzed.The mechanism of enhanced HRAM pressure induced by the RMPs was further revealed based on the theoretical model of the initial impact wave and the impulse analysis.Finally,the linear correlation between the deformation-thickness ratio and the non-dimensional impulse for the front panel was obtained and analyzed.It was determined that the enhanced near-field impulse induced by the RMPs was the dominant reason for the enhanced structural damage behavior.

Formation behaviors of rod-like reactive shaped charge penetrator and their effects on damage capability

Formation behaviors of rod-like reactive shaped charge penetrator(RRSCP)and their effects on damage capability are investigated by experiments and numerical simulations.The pulsed X-ray technology and a spaced aluminum/steel plate with the thicknesses of 5 mm/100 mm are used.Three types of sphericalsegment aluminum-polytetrafluoroethylene-copper(Al-PTFE-Cu)reactive liners with Cu contents of 0%,46.6%,and 66%are fabricated and tested.The experimental results show that the reactive liners can form excellent rod-shaped penetrators with tail skirts under the shaped charge effect,but the tail skirts disappear over time.Moreover,rupturing damage to the aluminum plate and penetration to the steel plate are caused by the RRSCP impact.From simulation analysis,the RRSCP is formed by a mechanically and chemically coupled response with the reactive liner activated by shock in its outer walls and bottom and then backward overturning,forming a leading reactive penetrator and a following chemical energy cluster.The unique formation structure determines the damage modes of the aluminum plate and the steel plate.Further analysis indicates that the formation behaviors and damage capability of Al-PTFE-Cu RRSCP strongly depend on Cu content.With increasing Cu content,the velocity,activation extent,and reaction extent of Al-PTFE-Cu RRSCP decrease,which contribute to elongation and alleviate the negative effects of chemical reactions on elongation,significantly increasing the length-diameter ratio and thus enhancing the capability of steel plate penetration.However,the lower activation extent and energetic density will weaken the RRSCP's capability of causing rupturing damage to the aluminum plate.

Reduction Discoloration of Reactive Dyed Cotton Waste and Chemical Recycling via Ionic Liquid

The textile industry generates large volumes of waste throughout its production process.Most of this waste is colored,therefore,discoloration is an important step toward recycling and reusing this waste.This study focused on the chemical reductive discoloration of textile waste composed of cotton dyed with reactive dye.The experimental design demonstrated the significant influence of the concentration of reducing agent and time of reaction on the degree of whiteness of the cotton fibers.The concentration of the alkaline agent was not significant in the process.The optimization of the reaction conditions lead to Berger degree of 50.5±3.5.The discolored cotton was chemically recycled through dissolution in ionic liquid 1-ethyl-3-methylimidazolium chloride and regeneration in film form in water.The microstructure of the regenerated cellulose films was evaluated by Scanning Electron Microscopy(SEM)indicating complete dissolution and uniform regeneration.The discoloration process reduced the polymerization degree and crystallinity index of the cotton fibers but retained the cellulose I structure.The dissolution and cellulose regeneration process results in transparent films with an amorphous structure.The thermal behavior,evaluated by thermogravimetric analysis,indicated that residues and regenerated film presented a main decomposition step.The maximum decomposition rate temperature of the regenerated films was approximately 40℃lower than the cotton fibers,which correlates well with the reduction in polymerization degree and amorphous structure.In general,the study demonstrated that textile cotton waste dyed with reactive dyes can be chemically discolored to form transparent and amorphous films,contributing to the development of sustainable strategies for the textile industry.

Fabrication and Properties of a New Reactive Diluent for Cationic UV Curing

The reactive diluent prepared by siloxane modified Trimethylene oxide can improve the performance of the UV curing system.Therefore,1,7-bis[(3-ethyl-3-methoxyoxacylobutane)propyl]octadecylosiloxane(BEMOPOMTS)was synthesized from diethyl carbonate,trimethylopropanes,allyl bromide,and 1,1,3,3,5,5,7,7-octadecylosiloxane as the main raw materials.BEMOPOMTS can be used as reactive diluents in the field of cationic UV curing.It has good thermal stability,and the addition of BEMOPOMTS significantly improves the tensile strength and elongation at break of epoxy resin.Compared with the pure epoxy resin,adding 20%BEMOPOMTS increased the elastic modulus by 25%to 677 MPa.

Adaptive optimisation of explosive reactive armour for protection against kinetic energy and shaped charge threats

We evaluate an adaptive optimisation methodology,Bayesian optimisation(BO),for designing a minimum weight explosive reactive armour(ERA)for protection against a surrogate medium calibre kinetic energy(KE)long rod projectile and surrogate shaped charge(SC)warhead.We perform the optimisation using a conventional BO methodology and compare it with a conventional trial-and-error approach from a human expert.A third approach,utilising a novel human-machine teaming framework for BO is also evaluated.Data for the optimisation is generated using numerical simulations that are demonstrated to provide reasonable qualitative agreement with reference experiments.The human-machine teaming methodology is shown to identify the optimum ERA design in the fewest number of evaluations,outperforming both the stand-alone human and stand-alone BO methodologies.From a design space of almost 1800 configurations the human-machine teaming approach identifies the minimum weight ERA design in 10 samples.

Porous-DeepONet:Learning the Solution Operators of Parametric Reactive Transport Equations in Porous Media

Reactive transport equations in porous media are critical in various scientific and engineering disciplines,but solving these equations can be computationally expensive when exploring different scenarios,such as varying porous structures and initial or boundary conditions.The deep operator network(DeepONet)has emerged as a popular deep learning framework for solving parametric partial differential equations.However,applying the DeepONet to porous media presents significant challenges due to its limited capability to extract representative features from intricate structures.To address this issue,we propose the Porous-DeepONet,a simple yet highly effective extension of the DeepONet framework that leverages convolutional neural networks(CNNs)to learn the solution operators of parametric reactive transport equations in porous media.By incorporating CNNs,we can effectively capture the intricate features of porous media,enabling accurate and efficient learning of the solution operators.We demonstrate the effectiveness of the Porous-DeepONet in accurately and rapidly learning the solution operators of parametric reactive transport equations with various boundary conditions,multiple phases,and multiphysical fields through five examples.This approach offers significant computational savings,potentially reducing the computation time by 50–1000 times compared with the finite-element method.Our work may provide a robust alternative for solving parametric reactive transport equations in porous media,paving the way for exploring complex phenomena in porous media.

Reactive Transport Process of Earthquake-induced Hydrochemical Changes in Guanding Thermal Spring,Western Sichuan,China

Earthquake-related hydrochemical changes in thermal springs have been widely observed;however,quantitative modeling of the reactive transport process is absent.In the present study,we apply reactive transport simulation to capture the hydrochemical responses in a thermal spring following the Wenchuan Ms 8.0 and Lushan Ms 7.0 earthquakes.We first constrain deep reservoir geothermal fluid compositions and temperature by multicomponent geothermometry,and then a reactive geochemical transport model is constructed to reproduce the hydrochemical evolution process.The results show that the recharge from the shallow aquifer increases gradually until it reaches a peak because of the permeability enhancement caused by the Lushan earthquake,which may be the mechanism to explain the earthquake-related hydrochemical responses.In contrast to the postseismic effect of the Wenchuan earthquake,the chemical evolution can be considered as hydrochemical anomalies related to the Lushan earthquake.This study proves that the efficient simulation of reactive transport processes is useful for investigating earthquake-related signals in hydrochemical time series.

The role of reactive oxygen species in gastric cancer

Gastric cancer(GC)ranks fifth in cancer incidence and fourth in cancer-related mortality worldwide.Reactive oxygen species(ROS)are highly oxidative oxygen-derived products that have crucial roles in cell signaling regulation and maintaining internal balance.ROS are closely associated with the occurrence,development,and treatment of GC.This review summarizes recent findings on the sources of ROS and the bidirectional regulatory effects on GC and discusses various treatment modalities for GC that are related to ROS induction.In addition,the regulation of ROS by natural small molecule compounds with the highest potential for development and applications in anti-GC research is summarized.The aim of the review is to accelerate the clinical application of modulating ROS levels as a therapeutic strategy for GC.

Star power: harnessing the reactive astrocyte response to promote remyelination in multiple sclerosis

Astrocytes are indispensable for central nervous system development and homeostasis.In response to injury and disease,astrocytes are integral to the immunological-and the,albeit limited,repair response.In this review,we will examine some of the functions reactive astrocytes play in the context of multiple sclerosis and related animal models.We will consider the heterogeneity or plasticity of astrocytes and the mechanisms by which they promote or mitigate demyelination.Finally,we will discuss a set of biomedical strategies that can stimulate astrocytes in their promyelinating response.

Different bactericidal abilities of plasma-activated saline with various reactive species prepared by surface plasma-activated air and plasma jet combinations

Plasma-activated water(PAW),as an extended form of cold atmospheric-pressure plasma,greatly expands the application of plasma-based technology.The biological effects of PAW are closely related to the aqueous reactive species,which can be regulated by the activation process.In this study,surface plasma-activated air(SAA)and a He+O_(2)plasma jet(Jet)were parallelly combined(the SAA+Jet combination)or sequentially combined(the SAA→Jet combination and the Jet→SAA combination)to prepare plasma-activated saline(PAS).The PAS activated by the combinations exhibited stronger bactericidal effects than that activated by the SAA or the Jet alone.The concentrations of H_(2)O_(2)and NO_(2)^(-)were higher in the PAS activated by the Jet→SAA combination,while ONOO^(-)concentrations were close in the three kinds of PAS and^(1)O_(2)concentrations were higher in the PAS activated by the SAA+Jet combination.The analysis of scavengers also demonstrated that H_(2)O_(2),^(1)O_(2),and ONOO^(-)in the PAS activated by the SAA+Jet combination,and^(1)O_(2)in the PAS activated by the Jet→SAA combination played critical roles in bactericidal effects.Further,the effective placement time of the three PAS varied,and the PAS activated by the Jet→SAA combination could also inactivate 2.6-log_(10)of MRSA cells after placement for more than 60 min.The regulation of reactive species in plasma-activated water via different combinations of plasma devices could improve the directional application of plasma-activated water in the biomedical field.

Structural characteristics of phenylboronic acid-modified astaxanthin ester and its effect on DSS-induced ulcerative colitis by blocking reactive oxygen species and maintaining intestinal homeostasis

A novel and reactive oxygen species(ROS)responsive astaxanthin phenylboronic acid derivative(AstaDPBA)was constructed by grafting phenylboronic acid(PBA)onto astaxanthin succinate diester(AstaD),and its chemical structure and physicochemical property were identified.AstaD-PBA could effectively improve the ROS quenching ability in the lipopolysaccharide(LPS)-induced RAW264.7 cell inflammation model.Then,the bioactivity of AstaD-PBA was studied by 4 zebrafish ROS-responsive infl ammatory models induced by LPS,copper(Cu^(2+)),high-fat diet,and dextran sodium sulfate(DSS).The results suggest that AstaD-PBA might have high biosafety and the best effect on ulcerative colitis(UC)induced by DSS.Furtherly,AstaDPBA significantly alleviated and treated weight loss and colonic shrinkage,inhibited infl ammatory cytokines,and maintained microbiota homeostasis to improve UC in C57BL/6J mice.Alistipes and Oscillibacter were expected to be considered UC marker fl ora according to the Metastats analysis and Pearson correlation Mantel test(P<0.01)of 16S rRNA gene sequencing data.In conclusion,AstaD-PBA has been promised to be a functional compound to improve UC and maintain intestinal microbiota homeostasis.

Microstructure and Oxidation Behavior of ZrB_(2)-SiC Ceramics Fabricated by Tape Casting and Reactive Melt Infiltration

ZrB_(2)-based ceramics typically necessitate high temperature and pressure for sintering,whereas ZrB_(2)-SiC ceramics can be fabricated at 1500℃using the process of reactive melt infiltration with Si.In comparison to the conventional preparation method,reactive synthesis allows for the more facile production of ultra-high temperature ceramics with fine particle size and homogeneous composition.In this work,ZrSi_(2),B4C,and C were used as raw materials to prepare ZrB_(2)-SiC via combination of tape casting and reactive melt infiltration herein referred to as ZBC ceramics.Control sample of ZrB_(2)-SiC was also prepared using ZrB_(2) and SiC as raw materials through an identical process designated as ZS ceramics.Microscopic analysis of both ceramic groups revealed smaller and more uniformly distributed particles of the ZrB_(2) phase in ZBC ceramics compared to the larger particles in ZS ceramics.Both sets of ceramics underwent cyclic oxidation testing in the air at 1600℃for a cumulative duration of 5 cycles,each cycle lasting 2 h.Analysis of the oxidation behavior showed that both ZBC ceramics and ZS ceramics developed a glassy SiO_(2)-ZrO_(2) oxide layer on their surfaces during the oxidation.This layer severed as a barrier against oxygen.In ZBC ceramics,ZrO_(2) is finely distributed in SiO_(2),whereas in ZS ceramics,larger ZrO_(2) particles coexist with glassy SiO_(2).The surface oxide layer of ZBC ceramics maintains a dense structure because the well-dispersed ZrO_(2) increases the viscosity of glassy SiO_(2),preventing its crystallization during the cooling.Conversely,some SiO_(2) in the oxide layer of ZS ceramics may crystallize and form a eutectic with ZrO_(2),leading to the formation of ZrSiO_(4).This leads to cracking of the oxide layer due to differences in thermal expansion coefficients,weakening its barrier effect.An analysis of the oxidation resistance shows that ZBC ceramics exhibit less increase in oxide layer thickness and mass compared to ZS ceramics,suggesting superior oxidation resistance of ZBC ceramics.

Microarrow sensor array with enhanced skin adhesion for transdermal continuous monitoring of glucose and reactive oxygen species

Conventional blood sampling for glucose detection is prone to cause pain and fails to continuously record glucose fluctuations in vivo.Continuous glucose monitoring based on implantable electrodes could induce pain and potential tissue inflammation,and the presence of reactive oxygen species(ROS)due to inflammationmay affect glucose detection.Microneedle technology is less invasive,yet microneedle adhesion with skin tissue is limited.In this work,we developed a microarrow sensor array(MASA),which provided enhanced skin surface adhesion and enabled simultaneous detection of glucose and H_(2)O_(2)(representative of ROS)in interstitial fluid in vivo.The microarrows fabricated via laser micromachining were modified with functional coating and integrated into a patch of a three-dimensional(3D)microneedle array.Due to the arrow tip mechanically interlocking with the tissue,the microarrow array could better adhere to the skin surface after penetration into skin.The MASA was demonstrated to provide continuous in vivo monitoring of glucose and H_(2)O_(2) concentrations,with the detection of H_(2)O_(2) providing a valuable reference for assessing the inflammation state.Finally,the MASA was integrated into a monitoring system using custom circuitry.This work provides a promising tool for the stable and reliable monitoring of blood glucose in diabetic patients.

Overexpression of PbrGA2ox1 enhances pear drought tolerance through the regulation of GA_(3)-inhibited reactive oxygen species detoxification and abscisic acid signaling

Drought stress is a devastating natural disaster driven by the continuing intensification of global warming,which seriously threatens the productivity and quality of several horticultural crops,including pear.Gibberellins(GAs)play crucial roles in plant growth,development,and responses to drought stress.Previous studies have shown significant reductions of GA levels in plants under drought stress;however,our understanding of the intrinsic regulation mechanisms of GA-mediated drought stress in pear remains very limited.Here,we show that drought stress can impair the accumulation of bioactive GAs(BGAs),and subsequently identified PbrGA2ox1 as a chloroplast-localized GA deactivation gene.This gene was significantly induced by drought stress and abscisic acid(ABA)treatment,but was suppressed by GA_(3)treatment.PbrGA2ox1-overexpressing transgenic tobacco plants(Nicotiana benthamiana)exhibited enhanced tolerance to dehydration and drought stresses,whereas knock-down of PbrGA2ox1 in pear(Pyrus betulaefolia)by virus-induced gene silencing led to elevated drought sensitivity.Transgenic plants were hypersensitive to ABA,and had a lower BGAs content,enhanced reactive oxygen species(ROS)scavenging ability,and augmented ABA accumulation and signaling under drought stress compared to wild-type plants.However,the opposite effects were observed with PbrGA2ox1 silencing in pear.Moreover,exogenous GA_(3)treatment aggravated the ROS toxic effect and restrained ABA synthesis and signaling,resulting in the compromised drought tolerance of pear.In summary,our results shed light on the mechanism by which BGAs are eliminated in pear leaves under drought stress,providing further insights into the mechanism regulating the effects of GA on the drought tolerance of plants.

Porous TiFe_(2) intermetallic compound fabricated via elemental powder reactive synthesis

Porous intermetallics show potential in the field of filtration and separation as well as in the field of catalysis.Herein,porous Ti Fe2intermetallics were fabricated by the reactive synthesis of elemental powders.The phase transformation and pore formation of porous TiFe2intermetallics were investigated,and its corrosion behavior and hydrogen evolution reaction(HER)performance in alkali solution were studied.Porous TiFe2intermetallics with porosity in the range of 34.4%-56.4%were synthesized by the diffusion reaction of Ti and Fe elements,and the pore formation of porous TiFe2intermetallic compound is the result of a combination of the bridging effect and the Kirkendall effect.The porous TiFe2samples exhibit better corrosion resistance compared with porous 316L stainless steel,which is related to the formation of uniform nanosheets on the surface that hinder further corrosion,and porous TiFe2electrode shows the overpotential of 220.6 and 295.6 mV at 10 and 100 mA·cm-2,suggesting a good catalytic performance.The synthesized porous Fe-based intermetallic has a controllable pore structure as well as excellent corrosion resistance,showing its potential in the field of filtration and separation.

OsbZIP53 Negatively Regulates Immunity Response by Involving in Reactive Oxygen Species and Salicylic Acid Metabolism in Rice

The basic region/leucine zipper(bZIP)transcription factors play important roles in plant development and responses to abiotic and biotic stresses.OsbZIP53 regulates resistance to Magnaporthe oryzae in rice by analyzing APIP5-RNAi transgenic plants.To further investigate the biological functions of OsbZIP53,we generated osbzip53 mutants using CRISPR/Cas9 editing and also constructed OsbZIP53 over-expression transgenic plants.Comprehensive analysis of phenotypical,physiological,and transcriptional data showed that knocking-out OsbZIP53 not only improved disease resistance by inducing a hypersensitivity response in plants,but also regulated the immune response through the salicylic acid pathway.Specifically,disrupting OsbZIP53 increased H2O2 accumulation by promoting reactive oxygen species generation through up-regulation of several respiratory burst oxidase homologs(Osrboh genes)and weakened H2O2 degradation by directly targeting OsMYBS1.In addition,the growth of osbzip53 mutants was seriously impaired,while OsbZIP53 over-expression lines displayed a similar phenotype to the wild type,suggesting that OsbZIP53 has a balancing effect on rice immune response and growth.

Study on theoretical model for electrical explosion resistivity of Al/Ni reactive multilayer foil

Al/Ni reactive multilayer foil(RMF)possesses excellent comprehensive properties as a promising substitute for traditional Cu bridge.A theoretical resistivity model of Al/Ni RMF was developed to guide the optimization of EFIs.Al/Ni RMF with different bilayer thicknesses and bridge dimensions were prepared by MEMS technology and electrical explosion tests were carried out.According to physical and chemical reactions in bridge,the electrical explosion process was divided into 5 stages:heating of condensed bridge,vaporization and diffusion of Al layers,intermetallic combination reaction,intrinsic explosion,ionization of metal gases,which are obviously shown in measured voltage curve.Effects of interface and grain boundary scattering on the resistivity of film metal were considered.Focusing on variations of substance and state,the resistivity was developed as a function of temperature at each stage.Electrical explosion curves were calculated by this model at different bilayer thicknesses,bridge dimensions and capacitor voltages,which showed an excellent agreement with experimental ones.

Recent progress on impact induced reaction mechanism of reactive alloys

In recent years,in order to improve the destructive effectiveness of munitions,the use of new types of destructive elements is an important way to improve destructive effectiveness.As a new type of reactive material,reactive alloy contains a large portion of reactive metal elements(Al,Mg,Ti,Zr,etc.),which breaks up under high-velocity impact conditions,generating a large number of high-temperature combustible fragments,which undergo a violent combustion reaction with air.Compared with traditional metal polymers(Al-PTFE)and other reactive composites,it has higher density and strength,excellent mechanical properties and broader application prospects.Currently,researchers have mainly investigated the impact energy release mechanism of reactive alloys through impact tests,and found that there are several important stages in the process of the material from fragmentation to reaction,i.e.,impact fragmentation of the material,rapid heating and combustion reaction.This paper focuses on three problems that need to be solved in the impact-induced energy release process of reactive alloys,namely:the fragmentation mechanism and size distribution law of the fragments produced by the impact of the material on the target,the relationship between the transient temperatures and the size of the fragments,and the reaction temperatures and size thresholds of the fragments to undergo the chemical reaction.The current status of the research of the above problems is reviewed,some potential directions to reveal the impact induced reaction mechanism of reactive alloy is discussed.