Predicting the transition-temperature shift(TTS)induced by neutron irradiation in reactor pressure-vessel(RPV)steels is important for the evaluation and extension of nuclear power-plant lifetimes.Current prediction mo...Predicting the transition-temperature shift(TTS)induced by neutron irradiation in reactor pressure-vessel(RPV)steels is important for the evaluation and extension of nuclear power-plant lifetimes.Current prediction models may fail to properly describe the embrittlement trend curves of Chinese domestic RPV steels with relatively low Cu content.Based on the screened surveillance data of Chinese domestic and similar international RPV steels,we have developed a new fluencedependent model for predicting the irradiation-embrittlement trend.The fast neutron fluence(E>1 MeV)exhibited the highest correlation coefficient with the measured TTS data;thus,it is a crucial parameter in the prediction model.The chemical composition has little relevance to the TTS residual calculated by the fluence-dependent model.The results show that the newly developed model with a simple power-law functional form of the neutron fluence is suitable for predicting the irradiation-embrittlement trend of Chinese domestic RPVs,regardless of the effect of the chemical composition.展开更多
Effects of the weld microstructure and inclusions on brittle fracture initiation are investigated in a thermally aged ferritic high-nickel weld of a reactor pressure vessel head from a decommissioned nuclear power pla...Effects of the weld microstructure and inclusions on brittle fracture initiation are investigated in a thermally aged ferritic high-nickel weld of a reactor pressure vessel head from a decommissioned nuclear power plant.As-welded and reheated regions mainly consist of acicular and polygonal ferrite,respectively.Fractographic examination of Charpy V-notch impact toughness specimens reveals large inclusions(0.5-2.5μm)at the brittle fracture primary initiation sites.High impact energies were measured for the specimens in which brittle fracture was initiated from a small inclusion or an inclusion away from the V-notch.The density,geometry,and chemical composition of the primary initiation inclusions were investigated.A brittle fracture crack initiates as a microcrack either within the multiphase oxide inclusions or from the debonded interfaces between the uncracked inclusions and weld metal matrix.Primary fracture sites can be determined in all the specimens tested in the lower part of the transition curve at and below the 41-J reference impact toughness energy but not above the mentioned value because of the changes in the fracture mechanism and resulting changes in the fracture appearance.展开更多
Microstructure evolution in neutron irradiated Reactor Pressure Vessel （RPV） steels was experimentally simulated through an improved degradation procedure in this study. The degradation procedure includes austenitiz...Microstructure evolution in neutron irradiated Reactor Pressure Vessel （RPV） steels was experimentally simulated through an improved degradation procedure in this study. The degradation procedure includes austenitizing at 1 150℃ and water quench, deformation 10% and 30% respectively, and then thermal aging at 500℃ for different period of time. The microstructure of the specimens was analyzed in details using transmission electron microscopy （TEM）. The micro-hardness test results showed that all the hardness curves of undeformed, 10% pre-deformed and 30% pre-deformed specimens have two micro-hardness peaks with the first peak value corresponding to different thermal aging time of 1 hour, 5 hours and 10 hours, respectively. It was revealed that the hardness curves were influenced by the precipitation of Cu-rich precipitates （CRPs） and carbides, deposition of martensite and work hardening.展开更多
Integrated reactor structural design makes the pressure vessel itself and loads more complicated, so stress concentration makes strength failure easier at reactor coolant pump nozzle. The general purpose finite elemen...Integrated reactor structural design makes the pressure vessel itself and loads more complicated, so stress concentration makes strength failure easier at reactor coolant pump nozzle. The general purpose finite element program ANSYS/ WORKBENCH was used for 3D stress and fatigue analysis and the results of the evaluation are based on RCC-M criteria. The integrated reactor structural design is evaluated to demonstrate with applicable criteria and ANSYS/WORK- BENCH has better operability than ANSYS APDL on stress analysis of reactor pressure vessel.展开更多
Reactor pressure vessel (RPV), the only key component that can not be replaced in nuclear power plants (NPPs), is the main barrier against the radioactive leakage. The lifetime of NPPs is dependent heavily on the life...Reactor pressure vessel (RPV), the only key component that can not be replaced in nuclear power plants (NPPs), is the main barrier against the radioactive leakage. The lifetime of NPPs is dependent heavily on the life of RPV, and thus, the aging and life research on a RPV is a key factor in determining the life extension of NPPs. The purpose of this paper is to introduce an aging and life management system for an operating RPV which can be used as a reference of the lifetime extension. In order to realize the objective, an aging and life management system was developed. It is an comprehensive knowledge management system that integrates decentralized information and serves as a valuable data center. Based on the storage and management of RPV state information and operation data, this system provides real-time monitoring of important operating parameters, evaluation of irradiation embrittlement, and RPV aging assessment. Therefore, it is anticipated that the developed system can be used as an efficient tool for aging and life estimation of RPV.展开更多
The crystal structure evolution of the Cu-rich nano precipitates from bcc to 9R during thermal aging was studied in nuclear reactor pressure vessel （RPV） model steels. The specimens, contained higher copper and nick...The crystal structure evolution of the Cu-rich nano precipitates from bcc to 9R during thermal aging was studied in nuclear reactor pressure vessel （RPV） model steels. The specimens, contained higher copper and nickel contents than commercially available one, were heated at 890 ~C for 0.5 h and then water quenched followed by tempering at 0（50 ~C for I0 h and aging at 400 ~C for 1000 h. It was observed that bcc and 9R orthogonal structure, as well as 9R orthogonal and 9R monoclinic structure, coexist in a single Cu-rich nano precipitate. Further analyses pointed out that Cu-rich nano precipitates of bcc structure were not stable, it may preferentially transform to 9R orthogonal structure and then to 9R monoclinic structure. This results showed that the crystal structure evolution of the Cu-rich nano precipitates was complex.展开更多
基金supported by the National Key R&D Program of China (No. 2019YFB1900901)the Fundamental Research Funds for the Central Universities (No. 2021MS032)
文摘Predicting the transition-temperature shift(TTS)induced by neutron irradiation in reactor pressure-vessel(RPV)steels is important for the evaluation and extension of nuclear power-plant lifetimes.Current prediction models may fail to properly describe the embrittlement trend curves of Chinese domestic RPV steels with relatively low Cu content.Based on the screened surveillance data of Chinese domestic and similar international RPV steels,we have developed a new fluencedependent model for predicting the irradiation-embrittlement trend.The fast neutron fluence(E>1 MeV)exhibited the highest correlation coefficient with the measured TTS data;thus,it is a crucial parameter in the prediction model.The chemical composition has little relevance to the TTS residual calculated by the fluence-dependent model.The results show that the newly developed model with a simple power-law functional form of the neutron fluence is suitable for predicting the irradiation-embrittlement trend of Chinese domestic RPVs,regardless of the effect of the chemical composition.
基金the SAFIR2022 BRUTE project (Barseback RPV material used for true evaluation of embrittlement) for funding the study
文摘Effects of the weld microstructure and inclusions on brittle fracture initiation are investigated in a thermally aged ferritic high-nickel weld of a reactor pressure vessel head from a decommissioned nuclear power plant.As-welded and reheated regions mainly consist of acicular and polygonal ferrite,respectively.Fractographic examination of Charpy V-notch impact toughness specimens reveals large inclusions(0.5-2.5μm)at the brittle fracture primary initiation sites.High impact energies were measured for the specimens in which brittle fracture was initiated from a small inclusion or an inclusion away from the V-notch.The density,geometry,and chemical composition of the primary initiation inclusions were investigated.A brittle fracture crack initiates as a microcrack either within the multiphase oxide inclusions or from the debonded interfaces between the uncracked inclusions and weld metal matrix.Primary fracture sites can be determined in all the specimens tested in the lower part of the transition curve at and below the 41-J reference impact toughness energy but not above the mentioned value because of the changes in the fracture mechanism and resulting changes in the fracture appearance.
文摘Microstructure evolution in neutron irradiated Reactor Pressure Vessel （RPV） steels was experimentally simulated through an improved degradation procedure in this study. The degradation procedure includes austenitizing at 1 150℃ and water quench, deformation 10% and 30% respectively, and then thermal aging at 500℃ for different period of time. The microstructure of the specimens was analyzed in details using transmission electron microscopy （TEM）. The micro-hardness test results showed that all the hardness curves of undeformed, 10% pre-deformed and 30% pre-deformed specimens have two micro-hardness peaks with the first peak value corresponding to different thermal aging time of 1 hour, 5 hours and 10 hours, respectively. It was revealed that the hardness curves were influenced by the precipitation of Cu-rich precipitates （CRPs） and carbides, deposition of martensite and work hardening.
文摘Integrated reactor structural design makes the pressure vessel itself and loads more complicated, so stress concentration makes strength failure easier at reactor coolant pump nozzle. The general purpose finite element program ANSYS/ WORKBENCH was used for 3D stress and fatigue analysis and the results of the evaluation are based on RCC-M criteria. The integrated reactor structural design is evaluated to demonstrate with applicable criteria and ANSYS/WORK- BENCH has better operability than ANSYS APDL on stress analysis of reactor pressure vessel.
文摘Reactor pressure vessel (RPV), the only key component that can not be replaced in nuclear power plants (NPPs), is the main barrier against the radioactive leakage. The lifetime of NPPs is dependent heavily on the life of RPV, and thus, the aging and life research on a RPV is a key factor in determining the life extension of NPPs. The purpose of this paper is to introduce an aging and life management system for an operating RPV which can be used as a reference of the lifetime extension. In order to realize the objective, an aging and life management system was developed. It is an comprehensive knowledge management system that integrates decentralized information and serves as a valuable data center. Based on the storage and management of RPV state information and operation data, this system provides real-time monitoring of important operating parameters, evaluation of irradiation embrittlement, and RPV aging assessment. Therefore, it is anticipated that the developed system can be used as an efficient tool for aging and life estimation of RPV.
基金financially supported by the National Basic Research Program of China(No.2011CB610503)National Natural Science Foundation of China(No.50931003)Ministry of Major Subject of Shanghai(No.S30107)
文摘The crystal structure evolution of the Cu-rich nano precipitates from bcc to 9R during thermal aging was studied in nuclear reactor pressure vessel （RPV） model steels. The specimens, contained higher copper and nickel contents than commercially available one, were heated at 890 ~C for 0.5 h and then water quenched followed by tempering at 0（50 ~C for I0 h and aging at 400 ~C for 1000 h. It was observed that bcc and 9R orthogonal structure, as well as 9R orthogonal and 9R monoclinic structure, coexist in a single Cu-rich nano precipitate. Further analyses pointed out that Cu-rich nano precipitates of bcc structure were not stable, it may preferentially transform to 9R orthogonal structure and then to 9R monoclinic structure. This results showed that the crystal structure evolution of the Cu-rich nano precipitates was complex.
