Real-Time Monitoring of Meteorological Data at In-Situ GCW Remediation Sites

To optimize the self-organization network, self-adaptation, real-time monitoring, remote management capability, and equipment reuse level of the meteorological station supporting the portable groundwater circulation wells, and to provide real-time and effective technical services and environmental data support for groundwater remediation, a real-time monitoring system design of the meteorological station supporting the portable groundwater circulation wells based on the existing equipment is proposed. A variety of environmental element information is collected and transmitted to the embedded web server by the intelligent weather transmitter, and then processed by the algorithm and stored internally, displayed locally, and published on the web. The system monitoring algorithm and user interface are designed in the CNWSCADA development environment to realize real-time processing and analysis of environmental data and monitoring, control, management, and maintenance of the system status. The PLC-controlled photovoltaic power generating panels and lithium battery packs are in line with the concept of energy saving and emission reduction, and at the same time, as an emergency power supply to guarantee the safety of equipment and data when the utility power fails to meet the requirements. The experiment proves that the system has the characteristics of remote control, real-time interaction, simple station deployment, reliable operation, convenient maintenance, and green environment protection, which is conducive to improving the comprehensive utilization efficiency of various types of environmental information and providing reliable data support, theoretical basis and guidance suggestions for the research of groundwater remediation technology and its disciplines, and the research and development of the movable groundwater cycling well monitoring system.

基于病菌孢子捕捉和real-time PCR技术的田间空气中小麦白粉病菌孢子动态监测及病情估计模型研究

利用Burkard定容式孢子捕捉器结合real-time PCR定量技术,分别对种植高抗、中感和高感白粉病小麦品种的田间空气中白粉病菌分生孢子浓度进行监测,结果表明,real-time PCR定量与传统的显微观察计数两种方法测得的孢子浓度呈显著正相关(P≤0.01),且两种病菌孢子计数方法在同一抗性品种上监测到的孢子浓度动态相近。此外,两种方法测得的孢子浓度与各气象因子的相关性分析结果一致,空气中的白粉病菌孢子浓度主要与空气相对湿度显著正相关。在此基础上,利用两种方法测定的田间空气中白粉病菌孢子浓度分别建立了基于累积孢子浓度的田间病情估计模型。分析发现,基于两种孢子浓度测定方法建立的病情估计模型间无显著性差异,表明real-time PCR定量技术测定的孢子浓度在构建白粉病病情估计模型上具有一定可行性。该结果为real-time PCR定量技术与病菌孢子捕捉技术相结合用于小麦白粉病的监测和预测提供理论依据。

Real-time State Monitoring During Switching Mode Transitions in High Power Three-level Inverters

大功率多电平逆变器近年来在实际工业生产中得到越来越广泛的应用。多电平逆变器由于结构复杂,采用元器件较多,因此在设计和实验中,实现各个工作状态下运行参数的同步监测和分析较为困难。本文针对大功率三电平逆变器,实现开关动态特性的在线测试,在此基础上,进一步研究三电平逆变器在开关状态变化时理论与实际负载运行工况下电路拓扑的转换变化规律。通过全电路电气参数和元器件状态的实时监测,发现在三电平逆变器非正常运行状态下开关转换时额外电应力,同时,深入研究在实际工况运行条件非正常状态下该额外电应力出现的机理和原因,为三电平逆变器的故障诊断提供了参考,对于设计高可靠性的多电平逆变器系统有一定的理论和现实意义。

Fiber optic monitoring of an anti-slide pile in a retrogressive landslide

Anti-slide piles are one of the most important reinforcement structures against landslides,and evalu-ating the working conditions is of great significance for landslide mitigation.The widely adopted analytical methods of pile internal forces include cantilever beam method and elastic foundation beam method.However,due to many assumptions involved in calculation,the analytical models cannot be fully applicable to complex site situations,e.g.landslides with multi-sliding surfaces and pile-soil interface separation as discussed herein.In view of this,the combination of distributed fiber optic sensing(DFOS)and strain-internal force conversion methods was proposed to evaluate the working conditions of an anti-sliding pile in a typical retrogressive landslide in the Three Gorges reservoir area,China.Brillouin optical time domain reflectometry(BOTDR)was utilized to monitor the strain distri-bution along the pile.Next,by analyzing the relative deformation between the pile and its adjacent inclinometer,the pile-soil interface separation was profiled.Finally,the internal forces of the anti-slide pile were derived based on the strain-internal force conversion method.According to the ratio of calculated internal forces to the design values,the working conditions of the anti-slide pile could be evaluated.The results demonstrated that the proposed method could reveal the deformation pattern of the anti-slide pile system,and can quantitatively evaluate its working conditions.

Real-time Monitoring of Subsea Gas Pipelines,Offshore Platforms,and Ship Inspection Scores Using an Automatic Identification System

The aim of this research is to develop an algorithm and application that can perform real-time monitoring of the safety operation of offshore platforms and subsea gas pipelines as well as determine the need for ship inspection using data obtained from automatic identification system(AIS).The research also focuses on the integration of shipping database,AIS data,and others to develop a prototype for designing a real-time monitoring system of offshore platforms and pipelines.A simple concept is used in the development of this prototype,which is achieved by using an overlaying map that outlines the coordinates of the offshore platform and subsea gas pipeline with the ship’s coordinates(longitude/latitude)as detected by AIS.Using such information,we can then build an early warning system(EWS)relayed through short message service(SMS),email,or other means when the ship enters the restricted and exclusion zone of platforms and pipelines.The ship inspection system is developed by combining several attributes.Then,decision analysis software is employed to prioritize the vessel’s four attributes,including ship age,ship type,classification,and flag state.Results show that the EWS can increase the safety level of offshore platforms and pipelines,as well as the efficient use of patrol boats in monitoring the safety of the facilities.Meanwhile,ship inspection enables the port to prioritize the ship to be inspected in accordance with the priority ranking inspection score.

High-precision and wide-range real-time neutron flux monitor system through multipoint linear calibration

The neutron flux monitor(NFM)system is an important diagnostic subsystem introduced by large nuclear fusion devices such as international thermonuclear experimental reactor(ITER),Japan torus-60,tokamak fusion test reactor,and HL-2 A.Neutron fluxes can provide real-time parameters for nuclear fusion,including neutron source intensity and fusion power.Corresponding to different nuclear reaction periods,neutron fluxes span over seven decades,thereby requiring electronic devices to operate in counting and Campbelling modes simultaneously.Therefore,it is crucial to design a real-time NFM system to encompass such a wide dynamic range.In this study,a high-precision NFM system with a wide measurement range of neutron flux is implemented using realtime multipoint linear calibration.It can automatically switch between counting and Campbelling modes with variations in the neutron flux.We established a testing platform to verify the feasibility of the NFM system,which can output the simulated neutron signal using an arbitrary waveform generator.Meanwhile,the accurate calibration interval of the Campbelling mode is defined well.Based on the above-mentioned design,the system satisfies the requirements,offering a dynamic range of 10~8 cps,temporal resolution of 1 ms,and maximal relative error of 4%measured at the signal-to-noise ratio of 15.8 dB.Additionally,the NFM system is verified in a field experiment involving HL-2 A,and the measured neutron flux is consistent with the results.

A Remote Real-Time Monitoring System for Power Quality

An introduction is made to the composition, design method and engineering application of a remote real time monitoring system of power quality in substations based on internet. With virtual instrument and network technique adopted, this system is characterized by good real time property, high reliability, plentiful functions, and so on. It also can be used to monitor the load of a substation, such as electric locomotives.

Real-Time Monitoring of Climactic and Geotechnical Variables during Landslides on the Slopes of Serra do Mar and Serra da Mantiqueira (São Paulo State, Brazil)

The municipalities of Ubatuba, Campos do Jord?o, and S?o José dos Campos are located in the region of S?o Paulo State (Brazil). These municipalities are recognized nationally for having an elevated number of recorded landslides on slopes and embankments. In addition, these municipalities contain multiple areas that are at risk for landslides. Various soil landslides occurred in these municipalities in January 2013, when real-time climactic and geotechnical variables were monitored by automatic rain gauges, humidity sensors and soil temperature and suction devices. The resulting data were used to understand the functions of each variable in the occurrence of land- slides. Analyses of rainfall, humidity and soil temperature were used with field investigations to formulate a hypothesis regarding the predominant rupture mechanism and the role of each monitored variable in the deflagration of the soil landslides that occurred in the three studied municipalities. The geotechnical variable data revealed that both temperature and soil moisture contents played fundamental roles in the deflagration of shallow planar landslides in urban areas. The hourly rain intensity and/or rainfall accumulation for 24 and/or 72 h were responsible for the deflagration of the landslides that occurred in the studied areas, along with the existing anthropic constraints in the risk areas. Significant variations did not occur in the soil suction data during the landslides, principally due to the unsatisfactory sensor precision when reading field suction between –10 and?–100 kPA (±25%).

The Improvement of Earthquake Real-Time Monitoring System of Chinese National Digital Seismic Network

The earthquake real-time monitoring system of the Chinese National Digital Seismic Network has been in operation since"the Ninth Five-year Plan"period,and the stability of the system has been well tested.In recent years,with the continuous improvement of monitoring technology and increase of public demands,the original real-time monitoring system needs to be upgraded and improved in terms of timeliness,stability,accuracy and ease of operation.Therefore,by accessing a total of more than 1,000 seismic stations,reducing the seismic trigger threshold of the monitoring system,eliminating the false trigger stations and optimizing the seismic waveform display interface,the current earthquake monitoring demands can be satisfied on the basis of ensuring the stable operation of the system.

A Novel Method for Real-Time Monitoring of Channel Siltation Based on Bistatic Scattering Theory

Monitoring the thickness changes of channel siltation is paramount in safeguarding navigation and guiding dredging, This paper presents a novel method for realizing the field monitoring of channel siltation in real time. The method is based on the bistatic scattering theory and concerned more with the receiving and processing of multipath signal at high-frequency and small grazing angle. By use of the multipath propagation structure of underwater acoustic channel, the method obtains the silt thickness by calculating the relative time delay of acoustic signals between the direct and the shortest bottom reflected paths. Bistatic transducer pairs are employed to transmit and receive the acoustic signals, and the GPS time synchronization technology is introduced to synchronize the transmitter and receiver, The WRELAX （Weighted Fourier transforul and RELAX） algorithm is used to obtain the high resolution estimation of muhipath time delay. To examine the feasibility of the presented method and the accuracy and precision of the developed system, a series of sea trials are conducted in the southwest coast area of Dalian City, north of the Yellow Sea. The experimental results are compared with that using high-resolution dual echo sounder HydroBoxTM, and the uncertainty is smaller than ＋ 0.06 m. Compared with the existing means for measuring the silt thickness, the present method is innovative, and the system is stable, efficient and provides a better real-time performance. It especially suits monitoring the narrow channel with rapid changes of siltation.

Multi-parameter real-time monitoring scheme for power transmission lines based on FBG sensors

A multi-parameter real-time monitoring scheme for power transmission line is proposed and experimentally demonstrated.The Fiber Bragg Grating(FBG)sensors are used to sensing the information of temperature and strain in the power transmission lines system,and a monitoring center based on client–server model is established to process and display the sensing information.Several FBG-based power transmission line temperature sensors interrogated based on the developed multi-parameter real-time monitoring scheme is experimentally investigated.The result shows that the system is very useful.

Deformation monitoring of long-span railway bridges based on SBAS-InSAR technology

The deformation monitoring of long-span railway bridges is significant to ensure the safety of human life and property.The interferometric synthetic aperture radar(In SAR)technology has the advantage of high accuracy in bridge deformation monitoring.This study monitored the deformation of the Ganjiang Super Bridge based on the small baseline subsets(SBAS)In SAR technology and Sentinel-1A data.We analyzed the deformation results combined with bridge structure,temperature,and riverbed sediment scouring.The results are as follows:(1)The Ganjiang Super Bridge area is stable overall,with deformation rates ranging from-15.6 mm/yr to 10.7 mm/yr(2)The settlement of the Ganjiang Super Bridge deck gradually increases from the bridge tower toward the main span,which conforms to the typical deformation pattern of a cable-stayed bridge.(3)The sediment scouring from the riverbed cause the serious settlement on the bridge’s east side compared with that on the west side.(4)The bridge deformation negatively correlates with temperature,with a faster settlement at a higher temperature and a slow rebound trend at a lower temperature.The study findings can provide scientific data support for the health monitoring of long-span railway bridges.

A Real-time Monitoring System for Tire Blowout or Severe Leakage

The tire blowout or severe leakage real-time monitoring is one of key technologies for developing a tire blowout automatic braking system.An indirect real-time monitoring method to fuse analyses of tire vibration and effective radius is provided in this paper,and a monitoring system is developed.The calibration and related test results showthat the system can detect the tire blowout in low and middle vehicle speeds and the severe leakage in all speeds timely and accurately.

Remote real-time monitoring soil water potential system based on GSM

Aiming at the limitation of traditional measuring soil water potential, the paper presents an information system based GSM to real-time monitor data coming from multiple data sources. The monitoring system, which consisted of monitoring center, GSM transmission channel and data detection terminal, was given. The detection terminal included the measuring station and TS-2 negative pressure meter, which was applied to measure soil water potential. Nowadays the system has been successfully applied to drip irrigation in the cotton field on farm in Xinjiang region. The system provides a feasible technology frame-work for collecting and processing wide geographical distribution data in farmland.

Real-time Monitoring of Nucleotide Excision of Molecular Beacon Catalyzed by Klenow Fragment

Klenow fragment（KF） uses the activity of a separate exonuclease to excise nucleotide, which is a crucial step in DNA replication and repair. Here is a novel sensitive and convenient method introduced for real-time monitoring nucleotide excision by KF with a molecular beacon as a detecting probe in a homogeneous solution. This method, which overcomes the drawbacks of traditional methods such as discontinuity, time consuming and low sensitivity, was used to assay KF activity and the detection limit reached up to 0.4 U/mL. In addition, the method was applied to investigating the effects of metal ions and chemical drugs on the reaction. The results demonstrate that it is a potential high-throughput assay for screening inhibitors and activity analysis of KF in vitro.

Alternate Data Acquisition and Real-time Monitoring System on HT-7 Tokamak

A new system called alternate data acquisition and real-time monitoring system has been developed for long-time discharge in tokamak operation. It can support continuous on-line data acquisition at a high sampling rate and a graphic display of the plasma parameters during the discharge. Thus operators can monitor and control the plasma state in real time. An application of this system has been demonstrated on the HT-7 tokamak.

Real-time monitoring of weld penetration quality in robotic arc welding process

It is of great significance to develop an intelligent monitoring system for weld penetration defects such as incomplete penetration and burn-through in real-time during robotic arc welding process. In this paper, robotic gas metal arc welding experiments are carried out on the mild steel test pieces with Vee-type groove. Through-the-arc sensing method is used to capture the transient values of the welding voltage and current. The raw data of the captured welding current and voltage are processed statistically, and the feature vector SIO is extracted to correlate the welding conditions to the weld penetration information. It lays foundation for intelligent monitoring of weld quality in robotic arc welding.

Real-Time Data and Visualization Monitoring of Computer Numerical Control Machine Tools Based on Hyper Text Markup Language 5

In order to ensure the safety,quality and efficiency of computer numerical control(CNC)machine tool processing,a real-time monitoring and visible solution for CNC machine tools based on hyper text markup language(HTML)5 is proposed.The characteristics of the real-time monitoring technology of CNC machine tools under the traditional Client/Server(C/S)structure are compared and analyzed,and the technical drawbacks are proposed.Web real-time communication technology and browser drawing technology are deeply studied.A real-time monitoring and visible system for CNC machine tool data is developed based on Metro platform,combining WebSocket real-time communication technology and Canvas drawing technology.The system architecture is given,and the functions and implementation methods of the system are described in detail.The practical application results show that the WebSocket real-time communication technology can effectively reduce the bandwidth and network delay and save server resources.The numerical control machine data monitoring system can intuitively reflect the machine data,and the visible effect is good.It realizes timely monitoring of equipment alarms and prompts maintenance and management personnel.

Relationship between hemoglobin glycation index and risk of hypoglycemia in type 2 diabetes with time-in-range in target

BACKGROUND In patients with type 2 diabetes mellitus(T2DM),the risk of hypoglycemia also occurs in at a time-in-range(TIR)of>70%.The hemoglobin glycation index(HGI)is considered the best single factor for predicting hypoglycemia,and offers new perspectives for the individualized treatment of patients with well-controlled blood glucose levels that are easily ignored in clinical settings.All participants underwent a 7-days continuous glucose monitoring(CGM)using a retrospective CGM system.We obtained glycemic variability indices using the CGM system.We defined HGI as laboratory hemoglobin A1c minus the glucose management indicator.Patients were categorized into low HGI(HGI<0.5)and high HGI groups(HGI≥0.5)according to HGI median(0.5).Logistic regression and receiver operating characteristic curve analyses were used to determine the risk factors for hypoglycemia.RESULTS We included 129 subjects with T2DM(54.84±12.56 years,46%male)in the study.Median TIR score was 90%.The high HGI group exhibited lower TIR and greater time below range with higher hemoglobin A1c than the low HGI group;this suggests more glycemic excursions and an increased incidence of hypoglycemia in the high HGI group.Multivariate analyses revealed that mean blood glucose,standard deviation of blood glucose and HGI were independent risk factors for hypoglycemia.Receiver operating characteristic curve analysis indicated that the HGI was the best predictor of hypoglycemia.In addition,the optimal cut-off points for HGI,mean blood glucose,and standard deviation of blood glucose in predicting hypoglycemia were 0.5%,7.2 mmol/L and 1.4 mmol/L respectively.CONCLUSION High HGI was significantly associated with greater glycemic excursions and increased hypoglycemia in patients with TIR>70%.Our findings indicate that HGI is a reliable predictor of hypoglycemia in this population.

Real-Time Air Monitoring of Trichloroethylene and Tetrachloroethylene Using Mobile TAGA Mass Spectrometry

Trichloroethylene (TCE) is a chlorinated liquid that is commonly used for metal degreasing, household and industrial dry cleaning, and in paints and glues. Tetrachloroethylene, also known as perchloroethylene (PCE), is an excellent solvent for organic materials. PCE is volatile, highly stable, non-flammable and widely used in dry cleaning. A new method has been developed for measuring TCE and PCE in ambient air in real-time. Based upon the chemical fingerprinting and concentration levels, the method was able to isolate the source of the emissions to the responsible facility. Real-time monitoring was accomplished by utilizing a low pressure chemical ionization source (LPCI) interfaced to a tandem mass spectrometer (TAGA). Monitoring the response of specific parent/daughter ion pairs, the TAGA was used to measure concentrations of TCE and PCE. By optimizing various TAGA parameters, detection limits (DL) as low as 0.5 μg/m3 was achieved for TCE and PCE. Unlike methods using cartridge sampling and GC/MS analysis, this new method provides a real time measurement for a wide range of TCE and PCE concentrations. This unique method was applied in 2000 and 2002 to measure TCE emitted from a manufacturer of stainless steel tubing in Eastern Ontario. The maximum half-hour average concentration of TCE measured downwind of the facility was 1300 μg/m3 and the maximum instantaneous level was measured at 115,000 μg/m3. The information collected by the TAGA unit was used by the Standard Development Branch of Ontario Ministry of the Environment to adopt the half-hour Point of Impingement (POI) standard of TCE to be 36 μg/m3 in 2010. This method successfully identified and simultaneously measured TCE and PCE during a 2011 air monitoring survey of a hazardous waste disposal and treatment facility in Southern Ontario.