Feasibility Assessment of Fast Numerical Simulations for Real-Time Monitoring and Control of PEM Fuel Cells

Computational models that ensure accurate and fast responses to the variations in operating conditions,such as the cell tem-perature and relative humidity(RH),are essential monitoring tools for the real-time control of proton exchange membrane(PEM)fuel cells.To this end,fast cell-area-averaged numerical simulations are developed and verifi ed against the present experiments under various RH levels.The present simulations and measurements are found to agree well based on the cell voltage(polarization curve)and power density under variable RH conditions(RH=40%,RH=70%,and RH=100%),which verifi es the model accuracy in predicting PEM fuel cell performance.In addition,computationally feasible reduced-order models are found to deliver a fast output dataset to evaluate the charge/heat/mass transfer phenomena as well as water production and two-phase fl ow transport.Such fast and accurate evaluations of the overall fuel cell operation can be used to inform the real-time control systems that allow for the improved optimization of PEM fuel cell performance.

A Real-time Monitoring System for Tire Blowout or Severe Leakage

The tire blowout or severe leakage real-time monitoring is one of key technologies for developing a tire blowout automatic braking system.An indirect real-time monitoring method to fuse analyses of tire vibration and effective radius is provided in this paper,and a monitoring system is developed.The calibration and related test results showthat the system can detect the tire blowout in low and middle vehicle speeds and the severe leakage in all speeds timely and accurately.

Construction of multi-factor identification model for real-time monitoring and early warning of mine water inrush

As a new technical means that can detect abnormal signs of water inrush in advance and give an early warning,the automatic monitoring and early warning of water inrush in mines has been widely valued in recent years.Due to the many factors affecting water inrush and the complicated water inrush mechanism,many factors close to water inrush may have precursory abnormal changes.At present,the existing monitoring and early warning system mainly uses a few monitoring indicators such as groundwater level,water influx,and temperature,and performs water inrush early warning through the abnormal change of a single factor.However,there are relatively few multi-factor comprehensive early warning identification models.Based on the analysis of the abnormal changes of precursor factors in multiple water inrush cases,11 measurable and effective indicators including groundwater flow field,hydrochemical field and temperature field are proposed.Finally,taking Hengyuan coal mine as an example,6 indicators with long-term monitoring data sequences were selected to establish a single-index hierarchical early-warning recognition model,a multi-factor linear recognition model,and a comprehensive intelligent early-warning recognition model.The results show that the correct rate of early warning can reach 95.2%.

The Improvement of Earthquake Real-Time Monitoring System of Chinese National Digital Seismic Network

The earthquake real-time monitoring system of the Chinese National Digital Seismic Network has been in operation since"the Ninth Five-year Plan"period,and the stability of the system has been well tested.In recent years,with the continuous improvement of monitoring technology and increase of public demands,the original real-time monitoring system needs to be upgraded and improved in terms of timeliness,stability,accuracy and ease of operation.Therefore,by accessing a total of more than 1,000 seismic stations,reducing the seismic trigger threshold of the monitoring system,eliminating the false trigger stations and optimizing the seismic waveform display interface,the current earthquake monitoring demands can be satisfied on the basis of ensuring the stable operation of the system.

Research and application of real-time monitoring and early warning thresholds for multi-temporal agricultural products information

Monitoring and early warning is an important means to effectively prevent risks in agricultural production,consumption and price.In particular,with the change of modes of national administration against the background of big data,improving the capacity to monitor agricultural products is of great significance for macroeconomic decision-making.Agricultural product information early warning thresholds are the core of agricultural product monitoring and early warning.How to appropriately determine the early warning thresholds of multi-temporal agricultural product information is a key question to realize real-time and dynamic monitoring and early warning.Based on the theory of abnormal fluctuation of agricultural product information and the research of substantive impact on the society,this paper comprehensively discussed the methods to determine the thresholds of agricultural product information fluctuation in different time dimensions.Based on the data of the National Bureau of Statistics of China(NBSC)and survey data,this paper used a variety of statistical methods to determine the early warning thresholds of the production,consumption and prices of agricultural products.Combined with Delphi expert judgment correction method,it finally determined the early warning thresholds of agricultural product information in multiple time,and carried out early warning analysis on the fluctuation of agricultural product monitoring information in 2018.The results show that:(1)the daily,weekly and monthly monitoring and early warning thresholds of agricultural products play an important early warning role in monitoring abnormal fluctuations with agricultural products;(2)the multitemporal monitoring and early warning thresholds of agricultural product information identified by the research institute can provide effective early warning on current abnormal fluctuation of agricultural product information,provide a benchmarking standard for China's agricultural production,consumption and price monitoring and early warning at the national macro level,and further improve the application of China's agricultural product monitoring and early warning.

Real-Time Monitoring of Climactic and Geotechnical Variables during Landslides on the Slopes of Serra do Mar and Serra da Mantiqueira (São Paulo State, Brazil)

The municipalities of Ubatuba, Campos do Jord?o, and S?o José dos Campos are located in the region of S?o Paulo State (Brazil). These municipalities are recognized nationally for having an elevated number of recorded landslides on slopes and embankments. In addition, these municipalities contain multiple areas that are at risk for landslides. Various soil landslides occurred in these municipalities in January 2013, when real-time climactic and geotechnical variables were monitored by automatic rain gauges, humidity sensors and soil temperature and suction devices. The resulting data were used to understand the functions of each variable in the occurrence of land- slides. Analyses of rainfall, humidity and soil temperature were used with field investigations to formulate a hypothesis regarding the predominant rupture mechanism and the role of each monitored variable in the deflagration of the soil landslides that occurred in the three studied municipalities. The geotechnical variable data revealed that both temperature and soil moisture contents played fundamental roles in the deflagration of shallow planar landslides in urban areas. The hourly rain intensity and/or rainfall accumulation for 24 and/or 72 h were responsible for the deflagration of the landslides that occurred in the studied areas, along with the existing anthropic constraints in the risk areas. Significant variations did not occur in the soil suction data during the landslides, principally due to the unsatisfactory sensor precision when reading field suction between –10 and?–100 kPA (±25%).

Indoor Air Quality Real-Time Monitoring Results of Pathology Department

In this work, the objectives were to provide a scientific basis for environmental governance and to ensure staff health by real-time monitoring of indoor air quality of the pathology department. Using eagle eye environment monitor to make a real-time dynamic monitoring of the air quality of the pathological technical room for 30 days, the paper records the monitoring data of PM 2.5, PM 10, formaldehyde, CO2, total volatile organic compounds (TVOC) every day at Beijing time 3 a.m, 10 am, 1 pm, 4 pm, and 10 pm, and makes a summarization and analysis. The average value of CO2 concentration of the 5 time points is (0.05 ± 0.01)%, and each time point concentration are different (P 0.05);the average TVOC concentration of the 5 time points is (0.08 + 0.31) mg/m3. They are all different between the concentration at each time point (P 2 and NO are not checked out. Through the real-time online monitoring of the pathology room, we find that the formaldehyde concentration of different time periods is far more than the safety value standard, and the concentration of formaldehyde, CO2, PM 2.5, PM 10 and total volatile organic compound (TVOC) is different at different time periods, and the concentrations at working time are higher than the non-working time. We must take effective measures to control the concentration of harmful gases in order to ensure the staff’s health.

Effective Use of Near Real-time Monitoring System for Stunting Reduction in Zimbabwe

Background:In Zimbabwe,26.2 percent of children under five are stunted.Evidence has shown that multi-sector interventions are key to addressing stunting.Yet,practical implementation is difficult,often occurring through separate disjointed and uncoordinated sector actions with limited access to real time information for decision-making.Objective:To describe the design,implementation,successes,challenges and lessons learned from using a near-real time monitoring(NRTM)system as a monitoring tool for multi-sectoral community based model for stunting reduction in Zimbabwe.Methods:An open source technology was used to obtain the information needed on the multi-sectoral coordination process,provide a common platform to capture and present data on situational factors,community conditions and practices to be acted upon and thus contribute to reducing stunting.Results:Significant improvements in community data flows were noted;the system brought together several types of data,concepts,stakeholders and multi-sector energies into focused programming.Several challenges including conceptual issues,initial coordination,financial resources and missed partnership opportunities were documented.The introduction of the NRTM system resulted in improved data flows for programme monitoring and facilitated multi-sector collaboration.Conclusion:NRTM is an effective monitoring tool for the multi-sectoral community based model to reduce stunting in Zimbabwe.

A New Method for Visual Real-Time Monitoring of Low Frequency Oscillation

Visual real-time monitoring is the premise of low frequency oscillation control in power grids. This paper showed a visual method for the control center of power grids to monitor low frequency oscillation. It processed the PMU real-time data with incomplete S-transform, and converted the waveforms to two-dimensional time-frequency figures which showed the initial time, frequency and amplitude of each low frequency oscillation mode directly. GPU was used to show figures and calculate FFT with the purpose of improving calculation efficiency. The results of practical cases show that the real-time characters of low frequency oscillation can be identified availably by this visualization real-time monitoring method which is helpful and suitable for practical application.

Bluetooth^TMEnabled Acceleration Tracking (BEAT) mHealth System: Validation and Proof of Concept for Real-Time Monitoring of Physical Activity

Physical activity is critical to improve the condition of patients with chronic leg and foot ulcers, especially those who are obese and experienced multiple co-morbid conditions. Unfortunately, these individuals are unable to engage in guideline based physical activity (PA) programs. A prototype of BluetoothTM enabled acceleration tracking (BEAT) mHealth system was developed and manufactured for remote monitoring and stimulation of adherence to PA in deconditioned patients. The system consists of a miniature accelerometer-based sensor, smartphone application, and a network service. Validation testing showed high reliability and reproducibility of the BEAT sensors. Pilot study with human subjects demonstrated high accuracy of the BEAT system in recognition of different exercises and calculating overall outcomes of PA. Taken together, these results indicate that BEAT system could become a valuable tool for realtime monitoring of PA in deconditioned patients.

Real-Time Monitoring System for Rotor Temperature of a Large Turbogenerator Based on SmartMesh IP Wireless Network Communication Technology

In this study,a real-time rotor temperature monitoring system for large turbogenerators using SmartMesh IP wireless network communication technology was designed and tested.The system is capable of providing comprehensive,accurate,continuous,and reliable real-time temperature monitoring for turbogenerators.Additionally,it has demonstrated satisfactory results in a real-time monitoring test of the rotor temperature of various famous large-scale turbogenerators and giant nuclear power half-speed turbogenerators designed and manufactured in China.The development and application of this wireless temperature measurement system would aid in improving the intelligent operation quality,safety,and stability of China’s large turbine generators and even the entire power system.

Stability and remote real-time monitoring of the slope slide body in the Luoshan mining area

Landslides have occurred frequently in the Luoshan mining area because of disordered mining.This paper discusses the landforms and physiognomy,hydro-meteorology,formation lithology,and geologic structure of the Luoshan mining area.It also describes the factors influencing the slope stability of landslide No.Ⅲ,determines the general parameters and typical section plane,analyzes the stress-strain state of the No.Ⅲ slope,and calculates its safety factors with FLAC3 D under saturated and natural conditions.Based on a stability analysis,a remote real-time monitoring system was applied to the No.Ⅲ slope,and these monitoring data were collected and analyzed.

A Remote Real-Time Monitoring System for Power Quality

An introduction is made to the composition, design method and engineering application of a remote real time monitoring system of power quality in substations based on internet. With virtual instrument and network technique adopted, this system is characterized by good real time property, high reliability, plentiful functions, and so on. It also can be used to monitor the load of a substation, such as electric locomotives.

Real-Time Monitoring and Forecast of Active Population Density Using Mobile Phone Data

Real-time monitoring and forecast of large scale active population density is of great significance as it can warn and prevent possible public safety accident caused by abnormal population aggregation.Active population is defined as the number of people with their mobile phone powered on.Recently,an unfortunate deadly stampede occurred in Shanghai on December 31th 2014 causing the death of 39 people.We hope that our research can help avoid similar unfortunate accident from happening.In this paper we propose a method for active population density real-time monitoring and forecasting based on data from mobile network operators.Our method is based solely on mobile network operators existing infrastructure and barely requires extra investment,and mobile devices play a very limited role in the process of population locating.Four series forecasting methods,namely Simple Exponential Smoothing(SES),Double exponential smoothing(DES),Triple exponential smoothing(TES)and Autoregressive integrated moving average(ARIMA)are used in our experiments.Our experimental results suggest that we can achieve good forecast result for 135 min in future.

Industry 4.0 Application in Manufacturing for Real-Time Monitoring and Control

Modern manufacturing aims to reduce downtime and track process anomalies to make profitable business decisions.This ideology is strengthened by Industry 4.0,which aims to continuously monitor high-value manufacturing assets.This article builds upon the Industry 4.0 concept to improve the efficiency of manufacturing systems.The major contribution is a framework for continuous monitoring and feedback-based control in the friction stir welding(FSW)process.It consists of a CNC manufacturing machine,sensors,edge,cloud systems,and deep neural networks,all working cohesively in real time.The edge device,located near the FSW machine,consists of a neural network that receives sensory information and predicts weld quality in real time.It addresses time-critical manufacturing decisions.Cloud receives the sensory data if weld quality is poor,and a second neural network predicts the new set of welding parameters that are sent as feedback to the welding machine.Several experiments are conducted for training the neural networks.The framework successfully tracks process quality and improves the welding by controlling it in real time.The system enables faster monitoring and control achieved in less than 1 s.The framework is validated through several experiments.

Real-time Monitoring of Nucleotide Excision of Molecular Beacon Catalyzed by Klenow Fragment

Klenow fragment(KF) uses the activity of a separate exonuclease to excise nucleotide, which is a crucial step in DNA replication and repair. Here is a novel sensitive and convenient method introduced for real-time monitoring nucleotide excision by KF with a molecular beacon as a detecting probe in a homogeneous solution. This method, which overcomes the drawbacks of traditional methods such as discontinuity, time consuming and low sensitivity, was used to assay KF activity and the detection limit reached up to 0.4 U/mL. In addition, the method was applied to investigating the effects of metal ions and chemical drugs on the reaction. The results demonstrate that it is a potential high-throughput assay for screening inhibitors and activity analysis of KF in vitro.

Theory and Application of System Integration for Real-Time Monitoring of Core Rock-Fill Dam Filling Construction Quality

The theory and method of system integration for the real-time monitoring of core rock-fill dam filling con- struction quality are studied in this paper. First, the importance analysis of system integration factors is carried out with the analytic hierarchy process. Then, according to the analysis result of integration factors, the conceptual model of system integration is built based on function integration, index integration, technology integration and information integration, the index structure of core rock-fill dam filling construction quality control is constructed and the method of function integration and technology integration is studied. The mathematical model of process monitoring is built according to monitoring objective, process and indexes. Research results have been applied in Nuozhadu core rock-fill dam construction management, realizing system integration through building appropriate monitoring work flow and comprehensive information platform of digital dam.

Alternate Data Acquisition and Real-time Monitoring System on HT-7 Tokamak

A new system called alternate data acquisition and real-time monitoring system has been developed for long-time discharge in tokamak operation. It can support continuous on-line data acquisition at a high sampling rate and a graphic display of the plasma parameters during the discharge. Thus operators can monitor and control the plasma state in real time. An application of this system has been demonstrated on the HT-7 tokamak.

Real-time Monitoring of Subsea Gas Pipelines,Offshore Platforms,and Ship Inspection Scores Using an Automatic Identification System

The aim of this research is to develop an algorithm and application that can perform real-time monitoring of the safety operation of offshore platforms and subsea gas pipelines as well as determine the need for ship inspection using data obtained from automatic identification system(AIS).The research also focuses on the integration of shipping database,AIS data,and others to develop a prototype for designing a real-time monitoring system of offshore platforms and pipelines.A simple concept is used in the development of this prototype,which is achieved by using an overlaying map that outlines the coordinates of the offshore platform and subsea gas pipeline with the ship’s coordinates(longitude/latitude)as detected by AIS.Using such information,we can then build an early warning system(EWS)relayed through short message service(SMS),email,or other means when the ship enters the restricted and exclusion zone of platforms and pipelines.The ship inspection system is developed by combining several attributes.Then,decision analysis software is employed to prioritize the vessel’s four attributes,including ship age,ship type,classification,and flag state.Results show that the EWS can increase the safety level of offshore platforms and pipelines,as well as the efficient use of patrol boats in monitoring the safety of the facilities.Meanwhile,ship inspection enables the port to prioritize the ship to be inspected in accordance with the priority ranking inspection score.

Electro-Discharge Fine Truing of Metal-Bonded Fine-Grain Diamond Wheel Based on Real-Time Monitoring

A data acquisition system based on LabVIEW is designed and implemented, and electro-discharge(ED) fine truing of metal-bonded fine-grain diamond wheel based on real-time monitoring is researched. Real-time monitoring not only makes efficient impulse specification of ED truing easily obtained, but also is good for timely identifying no-load, avoiding short circuit and arc discharge phenomena and then for obtaining normal machining state. ED fine truing of the fine-grain wheel includes two steps: rough truing for high efficiency and fine truing for high precision. Final ED truing precision and efficiency not only depend on electric process specification, but also is concerned with electrode shape, insulated performance of operating fluid and vertical feed quantity value and frequency. Experiments indicate that ED fine truing based on real-time monitoring can improve the truing precision and efficiency. Average machining efficiency of W10 wheel is about 0.95 μm/min; the final run-out by ED truing is less than 2 μm.