Real-time quality control of data from Sea-Wing underwater glider installed with Glider Payload CTD sensor

Profiles observed by Sea-Wing underwater gliders are widely applied in scientific research. However, the quality control(QC) of these data has received little attention. The mismatch between the temperature probe and conductivity cell response times generates erroneous salinities, especially across a strong thermocline. A sensor drift may occur owing to biofouling and biocide leakage into the conductivity cell when a glider has operated for several months. It is therefore critical to design a mature real-time QC procedure and develop a toolbox for the QC of Sea-Wing glider data. On the basis of temperature and salinity profiles observed by several Sea-Wing gliders each installed with a Sea-Bird Glider Payload CTD sensor, a real-time QC method including a thermal lag correction, Argo-equivalent real-time QC tests, and a simple post-processing procedure is proposed. The method can also be adopted for Petrel gliders.

Integrated strategy for real-time wind power fluctuation mitigation and energy storage system control

To address the impact of wind-power fluctuations on the stability of power systems,we propose a comprehensive approach that integrates multiple strategies and methods to enhance the efficiency and reliability of a system.First,we employ a strategy that restricts long-and short-term power output deviations to smoothen wind power fluctuations in real time.Second,we adopt the sliding window instantaneous complete ensemble empirical mode decomposition with adaptive noise(SW-ICEEMDAN)strategy to achieve real-time decomposition of the energy storage power,facilitating internal power distribution within the hybrid energy storage system.Finally,we introduce a rule-based multi-fuzzy control strategy for the secondary adjustment of the initial power allocation commands for different energy storage components.Through simulation validation,we demonstrate that the proposed comprehensive control strategy can smoothen wind power fluctuations in real time and decompose energy storage power.Compared with traditional empirical mode decomposition(EMD),ensemble empirical mode decomposition(EEMD),and complete ensemble empirical mode decomposition with adaptive noise(CEEMDAN)decomposition strategies,the configuration of the energy storage system under the SW-ICEEMDAN control strategy is more optimal.Additionally,the state-of-charge of energy storage components fluctuates within a reasonable range,enhancing the stability of the power system and ensuring the secure operation of the energy storage system.

Mitochondrial dysfunction and quality control lie at the heart of subarachnoid hemorrhage

The dramatic increase in intracranial pressure after subarachnoid hemorrhage leads to a decrease in cerebral perfusion pressure and a reduction in cerebral blood flow.Mitochondria are directly affected by direct factors such as ischemia,hypoxia,excitotoxicity,and toxicity of free hemoglobin and its degradation products,which trigger mitochondrial dysfunction.Dysfunctional mitochondria release large amounts of reactive oxygen species,inflammatory mediators,and apoptotic proteins that activate apoptotic pathways,further damaging cells.In response to this array of damage,cells have adopted multiple mitochondrial quality control mechanisms through evolution,including mitochondrial protein quality control,mitochondrial dynamics,mitophagy,mitochondrial biogenesis,and intercellular mitochondrial transfer,to maintain mitochondrial homeostasis under pathological conditions.Specific interventions targeting mitochondrial quality control mechanisms have emerged as promising therapeutic strategies for subarachnoid hemorrhage.This review provides an overview of recent research advances in mitochondrial pathophysiological processes after subarachnoid hemorrhage,particularly mitochondrial quality control mechanisms.It also presents potential therapeutic strategies to target mitochondrial quality control in subarachnoid hemorrhage.

Data Quality Control Method of a New Drifting Observation Technology Named Drifting Air-Sea Interface Buoy

An integral quality control(QC)procedure that integrates various QC methods and considers the design indexes and operational status of the instruments for the observations of drifting air-sea interface buoy was developed in the order of basic in-spection followed by targeted QC.The innovative method of combining a moving Hampel filter and local anomaly detection com-plies with statistical laws and physical processes,which guarantees the QC performance of meteorological variables.Two sets of observation data were used to verify the applicability and effectiveness of the QC procedure,and the effect was evaluated using the observations of the Kuroshio Extension Observatory buoy as the reference.The results showed that the outliers in the time series can be correctly identified and processed,and the quality of data improved significantly.The linear correlation between the quality-controlled observations and the reference increased,and the difference decreased.The correlation coefficient of wind speed before and after QC increased from 0.77 to 0.82,and the maximum absolute error decreased by approximately 2.8ms^(-1).In addition,air pressure and relative humidity were optimized by 10^(-3)–10^(-2) orders of magnitude.For the sea surface temperature,the weight of coefficients of the continuity test algorithm was optimized based on the sea area of data acquisition,which effectively expanded the applicability of the algorithm.

Protein Disulfide Isomerase and Its Potential Function on Endoplasmic Reticulum Quality Control in Diatom Phaeodactylum tricornutum

PDI is a molecular chaperone and plays an important role in Endoplasmic Reticulum quality control (ERQC).PDI participates in the refolding of the misfolded/unfolded proteins to maintain cellular homeostasis under differentstresses. However, bioinformatic characteristics and potential functions of PDIs in diatom Phaeodactylumtricornutum (Pt) are still unknown so far. Hence, the genome-wide characteristics of PtPDI proteins in P. tricornutumwere first studied via bioinformatic and transcriptomic methods. 42 PtPDI genes were identified from thegenome of P. tricornutum. The motif, protein structure, classification, number of introns, phylogenetic relationship,and the expression level of 42 PtPDI genes under the tunicamycin stress were analyzed. A pair of tandemduplicated genes (PtPDI15 and PtPDI18) was observed in P. tricornutum. The 42 PtPDIs with different genecharacteristics were divided into three independent clades, indicating different evolutional relationships and functionsof these PtPDIs. The 14 up-regulated PtPDI genes under the tunicamycin treatment might have a positiveeffect on the ER quality control of the unfolded/misfolded proteins, while the 7 down-regulated PtPDIs mightnegatively affect the ERQC. The characteristics of all 42 PtPDIs and their proposed working model here providea comprehensive understanding of the PtPDIs gene family. The differential expression of 21 PtPDIs will be usefulfor further functional study in the ERQC.

Research on the Application of Evidence-Based Quality Control Circle to Improve the Implementation Rate of Airway Management Measures in Adult Critically Ill Patients

Objective: To explore the effect of evidence-based quality control circle (QCC) in improving the implementation rate of airway management measures in adult critically ill patients. Methods: Based on the Joanna Briggs Institute (JBI) evidence-based health care model, the best evidence of airway management in adult critically ill patients was obtained and applied to the clinic. Results: The total implementation rate of airway management measures in adult critically ill patients increased from 23.62% before the implementation of quality control circle to 88.82%, and the pulmonary infection rate in critically ill patients decreased from 42.31% to 21.74%, with statistical significance between the two groups (P 0.05). Conclusion: Evidence-based quality control circle activities can standardize the practice standards of airway management in critically ill patients, reduce the occurrence of patients’ airway related complications, and improve clinical outcomes.

Application of Specialized Group Management in the Quality Control of Perioperative Nursing

Objective:To explore the role of specialized group management in the quality control of perioperative nursing.Methods:45 surgical nurses from our hospital were selected as the research subjects.Traditional operating room management was adopted from July 2019 to June 2020,and specialized group management was adopted from July 2020 to June 2021.The surgeon’s satisfaction,surgical nurses’core professional competence,and surgical patients’satisfaction were obtained through surveys and the results were analyzed.Results:Surgeon satisfaction before the implementation of specialized group management was significantly lower than after its implementation(P<0.05).Besides,surgical nurses’core professional competency scores before the implementation of specialized group management were significantly lower than after its implementation(P<0.05).Lastly,surgical patients’satisfaction before the implementation of specialized group management was significantly lower than after its implementation(P<0.05).Conclusion:Specialized group management helps to improve the quality of perioperative care and should be applied in clinical practice.

Evaluation of the Impact of Refined Quality Control Management Model on the Qualified Rate of Disinfection and Sterilization of Surgical Instruments in the Sterilization Supply Center

Objective:To evaluate the application value of a refined quality control management model for a sterilization supply center.Methods:A retrospective analysis was conducted on the work situation of the sterilization supply center from January 2021 to January 2023.The work situation before January 31,2022,was classified as the control group;a routine quality control management model was implemented,and the work situation after January 31,2022,was classified as the observation group.The quality of medical device management and department satisfaction between the two groups were compared.Results:The timely recovery and supply rate,classification and cleaning pass rate,disinfection pass rate,packaging pass rate,sterilization pass rate,and department satisfaction score in the observation group were all higher than those of the control group(P<0.05).Conclusion:Implementing a refined quality control management model in the sterilization supply center can improve the quality management level of medical devices and department satisfaction and is worthy of promotion.

Feasibility Assessment of Fast Numerical Simulations for Real-Time Monitoring and Control of PEM Fuel Cells

Computational models that ensure accurate and fast responses to the variations in operating conditions,such as the cell tem-perature and relative humidity(RH),are essential monitoring tools for the real-time control of proton exchange membrane(PEM)fuel cells.To this end,fast cell-area-averaged numerical simulations are developed and verifi ed against the present experiments under various RH levels.The present simulations and measurements are found to agree well based on the cell voltage(polarization curve)and power density under variable RH conditions(RH=40%,RH=70%,and RH=100%),which verifi es the model accuracy in predicting PEM fuel cell performance.In addition,computationally feasible reduced-order models are found to deliver a fast output dataset to evaluate the charge/heat/mass transfer phenomena as well as water production and two-phase fl ow transport.Such fast and accurate evaluations of the overall fuel cell operation can be used to inform the real-time control systems that allow for the improved optimization of PEM fuel cell performance.

Quality control of marine big data——a case study of real-time observation station data in Qingdao

Offshore waters provide resources for human beings,while on the other hand,threaten them because of marine disasters.Ocean stations are part of offshore observation networks,and the quality of their data is of great significance for exploiting and protecting the ocean.We used hourly mean wave height,temperature,and pressure real-time observation data taken in the Xiaomaidao station(in Qingdao,China)from June 1,2017,to May 31,2018,to explore the data quality using eight quality control methods,and to discriminate the most effective method for Xiaomaidao station.After using the eight quality control methods,the percentages of the mean wave height,temperature,and pressure data that passed the tests were 89.6%,88.3%,and 98.6%,respectively.With the marine disaster(wave alarm report)data,the values failed in the test mainly due to the influence of aging observation equipment and missing data transmissions.The mean wave height is often affected by dynamic marine disasters,so the continuity test method is not effective.The correlation test with other related parameters would be more useful for the mean wave height.

Study on Rear-end Real-time Data Quality Control Method of Regional Automatic Weather Station

[Objective] The aim was to study the rear-end real-time data quality control method of regional automatic weather station. [Method] The basic content and steps of rear-end real-time data quality control of regional automatic weather station were introduced. Each element was treated with systematic quality control procedure. The existence of rear-end real time data of regional meteorological station in Guangxi was expounded. Combining with relevant elements and linear changes, improvement based on traditional quality control method was made. By dint of evaluation and relevant check of element, the quality of temperature and pressure was controlled. [Result] The method was optimized based on traditional quality control method, and it narrowed the effectiveness of real-time data quality control. The quality check of hourly precipitation applied relevant check of hourly minimum temperature, vertical consistency check of radar data, which can effectively improve the accuracy and credibility of hourly precipitation quality control. [Conclusion] The method was on trial for one year in the quality control of real-time data in the regional automatic meteorological station in Guangxi and had gained good outcome.

Quality Control System of Meteorological Real-time Data from Automatic Weather Stations in Shandong

The quality control system for meteorological real-time data from automatic weather stations in Shandong realized integration of communi- cation system and provincial quality control system, and an interaction platform which was mainly created by Web was set up. The system not only was fully guaranteed for the funning of basic business, also improved the reliability of the data.

Applying real-time control to enhance the performance of nitrogen removal in CAST system

A bench-scale reactor（72 L） red with domestic sewage, was operated more than 3 months with three operation modes： traditional mode, modified mode and real-time control mode, so as to evaluate effects of the operation mode on the system performance and to develop a feasible control strategy. Results obtained from fixed-time control study indicate that the variations of the pH and oxidation-reduction potential（ORP） profiles can represent dynamic characteristics of system and the cycle sequences can be controlled and optimized by the control points on the pH and ORP profiles. A control strategy was, therefore, developed and applied to real-time control mode. Compared with traditional mode, the total nitrogen（TN） removal can be increased by approximately 16% in modified mode and a mean TN removal of 92% was achieved in real-time control mode. Moreover, approximately 12.5% aeration energy was saved in real- time control mode. The result of this study shows that the performance of nitrogen removal was enhanced in modified operation mode. Moreover, the real-time control made it possible to optimize process operation and save aeration energy.

Intercross real-time control strategy in alternating activated sludge process for short-cut biological nitrogen removal treating domestic wastewater

To develop technically feasible and economically favorable dynamic process control(DPC)strategies for an alternating activated sludge(AAS)system,a bench-scale continuous-flow alternating aerobic and anoxic reactor,performing short-cut nitrogen removal from real domestic wastewater was operated under different control strategies for more than five months.A fixed-time control(FTC) study showed that bending-points on pH and oxidation-reduction potential(ORP)profiles accurately coincided with the major biologic...

Validation of housekeeping genes as internal controls for studying the gene expression in Pyropia haitanensis(Bangiales, Rhodophyta) by quantitative real-time PCR

Pyropia haitanensis is an economically important mariculture crop in China and has a high research value for several life phenomena, for example environmental tolerance. To explore the mechanisms underlying these characteristics, gene expression has been investigated at the whole transcriptome level. Gene expression studies using quantitative real-time PCR should start by selecting an appropriate internal control gene; therefore, the absolute expression abundance of six housekeeping genes （18S rRNA （18S）, ubiquitin-conju-ating enzyme （UBC）, actin （ACT）, β-tubulin （TUB）, elongation factors 2 （EF2）, and glyceraldehyde-3-phos- phate dehydrogenase （GAPDH） examined by the quantitative real-time PCR in samples corresponding to different strains, life-cycle stages and abiotic stress treatments. Their expression stabilities were assessed by the comparative cycle threshold （Ct） method and by two different software packages： geNorm and NormFinder. The most stable housekeeping gene is UBC and the least stable housekeeping is GADPH. Thus, it is proposed that the most appropriate internal control gene for expression analyses in P. haitanensis is UBC. The results pave the way for further gene expression analyses of different aspects of P. haitanensis biology including different strains, life-history stages and abiotic stress responses.

Control performance comparison between tuned liquid damper and tuned liquid column damper using real-time hybrid simulation

Tuned liquid damper (TLD) and tuned liquid column damper (TLCD) are two types of passive control devices that are widely used in structural control. In this study, a real-time hybrid simulation (RTHS) technique is employed to investigate the diff erence in control performance between TLD and TLCD. A series of RTHSs is presented with the premise of the same liquid length, mass ratio, and structural parameters. Herein, TLD and TLCD are physically experimented, and controlled structures are numerically simulated. Then, parametric studies are performed to further evaluate the diff erent performance between TLD and TLCD. Experimental results demonstrate that TLD is more eff ective than TLCD under diff erent amplitude excitations.

Quality Control at Nomophobia and Dependency to Technological

This study aims to investigate the phenomenon of technological gadget usage among pre-university students,which include the time spent using them,as well as their purpose and influence.A descriptive research design was adopted in this study.131 pre-university students were randomly selected to answer a structured questionnaire.They were informed two weeks earlier to keep track on their time spent on technological devices,before answering the questionnaire.Findings showed that 99.2%of the respondents owned at least two technological gadgets,and all respondents own a smartphone.The main two gadgets that respondents spend at least 4 h a day on are smartphones(65.6%)and computers/laptops(21.4%).This indicates that smartphones are commonly used and owned among the respondents.The majority of the respondents are moderately nomophobia and moderately dependent on smartphones(70.2%and 66.4%,respectively).Correlation analysis demonstrates that the total time spent on gadgets in a day has a significant positive correlation with gadget dependency and total number of gadgets owned.Meanwhile,logistic regression was conducted to estimate the probability of nomophobia and dependency using total time spent and total number of technological gadgets.From thefindings,it was demonstrated that when the total time spent on using technological gadgets increasing,there is greater probability that the respondents develop nomophobia and dependency.This indicates that nomophobia and dependency to technological gadgets can be used to predict lifestyle profiles.The use of technological gadgets can bring both benefit and harm to its user.In light of this,user has to remain rational in order to derive maximum benefit from it.

Real-Time Iterative Compensation Framework for Precision Mechatronic Motion Control Systems

With regard to precision/ultra-precision motion systems,it is important to achieve excellent tracking performance for various trajectory tracking tasks even under uncertain external disturbances.In this paper,to overcome the limitation of robustness to trajectory variations and external disturbances in offline feedforward compensation strategies such as iterative learning control(ILC),a novel real-time iterative compensation(RIC)control framework is proposed for precision motion systems without changing the inner closed-loop controller.Specifically,the RIC method can be divided into two parts,i.e.,accurate model prediction and real-time iterative compensation.An accurate prediction model considering lumped disturbances is firstly established to predict tracking errors at future sampling times.In light of predicted errors,a feedforward compensation term is developed to modify the following reference trajectory by real-time iterative calculation.Both the prediction and compen-sation processes are finished in a real-time motion control sampling period.The stability and convergence of the entire control system after real-time iterative compensation is analyzed for different conditions.Various simulation results consistently demonstrate that the proposed RIC framework possesses satisfactory dynamic regulation capability,which contributes to high tracking accuracy comparable to ILC or even better and strong robustness.

Real-Time Memory Data Optimization Mechanism of Edge IoT Agent

With the full development of disk-resident databases(DRDB)in recent years,it is widely used in business and transactional applications.In long-term use,some problems of disk databases are gradually exposed.For applications with high real-time requirements,the performance of using disk database is not satisfactory.In the context of the booming development of the Internet of things,domestic real-time databases have also gradually developed.Still,most of them only support the storage,processing,and analysis of data values with fewer data types,which can not fully meet the current industrial process control system data types,complex sources,fast update speed,and other needs.Facing the business needs of efficient data collection and storage of the Internet of things,this paper optimizes the transaction processing efficiency and data storage performance of the memory database,constructs a lightweight real-time memory database transaction processing and data storage model,realizes a lightweight real-time memory database transaction processing and data storage model,and improves the reliability and efficiency of the database.Through simulation,we proved that the cache hit rate of the cache replacement algorithm proposed in this paper is higher than the traditional LRU(Least Recently Used)algorithm.Using the cache replacement algorithm proposed in this paper can improve the performance of the system cache.

HPLC Profiling for Quality Control of Secondary Metabolites of Aqueous and Hydroethanolic Extract of Gardenia aqualla Stapf &Hutch

WHO strategy on traditional medicine is based on security and quality of phytomedicine. Commonly adulterated affecting mostly metabolic and sexual dysfunction drugs. Control quality of those phytomedicines requires development of strategy and techniques applicable to them. Among the techniques, Reverse Phase Liquid Chromatography is the most used and has been developed in these studies to assess a protocol to characterize Gardenia aqualla leaves extract. The method consists in determining chromatographic conditions using organic and pH gradient models based on water and acetonitrile combined with pH modifiers made up of formic acid (AF) and ammonium hydroxide (NH3). Results show that extracts contain mainly acidic compounds quickly eluted by NH3 and more retained by AF. Optimal pH range for separation is 3 - 7 corresponding to 1.59 mM of NH3 and 6.55 mM of AF. In these conditions, elution of many polar compounds could be effective using a C18 based-deactivated column in a short period of time.