The dual transmitter implements the equivalent anti-magnetic flux transient electromagnetic method, which can effectively reduce the scope of the transient electromagnetic detection blind area. However, this method is...The dual transmitter implements the equivalent anti-magnetic flux transient electromagnetic method, which can effectively reduce the scope of the transient electromagnetic detection blind area. However, this method is rarely reported in the detection of pipelines in urban geophysical exploration and the application of coal mines. Based on this, this paper realizes the equivalent anti-magnetic flux transient electromagnetic method based on the dual launcher. The suppression effect of this method on the blind area is analyzed by physical simulation. And the detection experiment of underground pipelines is carried out outdoors. The results show that the dual launcher can significantly reduce the turn-off time, thereby effectively reducing the impact of the blind area on the detection results, and the pipeline detection results verify the device’s effectiveness. Finally, based on the ground experimental results, the application prospect of mine advanced detection is discussed. Compared with other detection fields, the formation of blind areas is mainly caused by the equipment. If the dual launcher can be used to reduce the blind area, the accuracy of advanced detection can be improved more effectively. The above research results are of great significance for improving the detection accuracy of the underground transient electromagnetic method.展开更多
Railway Point System(RPS)is an important infrastructure in railway industry and its faults may have significant impacts on the safety and efficiency of train operations.For the fault diagnosis of RPS,most existing met...Railway Point System(RPS)is an important infrastructure in railway industry and its faults may have significant impacts on the safety and efficiency of train operations.For the fault diagnosis of RPS,most existing methods assume that sufficient samples of each failure mode are available,which may be unrealistic,especially for those modes of low occurrence frequency but with high risk.To address this issue,this work proposes a novel fault diagnosis method that only requires the power signals generated under normal RPS operations in the training stage.Specifically,the failure modes of RPS are distinguished through constructing a reasoning diagram,whose nodes are either binary logic problems or those that can be decomposed into the problems of the binary logic.Then,an unsupervised method for the signal segmentation and a fault detection method are combined to make decisions for each binary logic problem.Based on the results of decisions,the diagnostic rules are established to identify the failure modes.Finally,the data collected from multiple real-world RPSs are used for validation and the results demonstrate that the proposed method outperforms the benchmark in identifying the faults of RPSs.展开更多
Extracting and synthesizing information from existing and massive amounts of geology spatial data sets is of great scientific significance and has considerable value in its applications. To make mineral exploration le...Extracting and synthesizing information from existing and massive amounts of geology spatial data sets is of great scientific significance and has considerable value in its applications. To make mineral exploration less expensive, more efficient, and more accurate, it is important to move beyond traditional concepts and establish a rapid, efficient, and intelligent method of predicting the existence and location of minerals. This paper describes a case-based reasoning (CBR) method for mineral prospectivity mapping that takes spatial features of geology data into account and offers an intelligent approach. This method include a metallogenic case representation that combines spatial and attribute features, metallogenic case-based storage organization, and a metallogenic case similarity retrieval model. The experiments were performed in the eastern Kunlun Mountains, China using CBR and weights-of-evidence (WOE), respectively. The results show that the prediction accuracy of the CBR is higher than that of the WOE.展开更多
Theα-universal triple I(α-UTI)method is a recognized scheme in the field of fuzzy reasoning,whichwas proposed by our research group previously.The robustness of fuzzy reasoning determines the quality of reasoning al...Theα-universal triple I(α-UTI)method is a recognized scheme in the field of fuzzy reasoning,whichwas proposed by our research group previously.The robustness of fuzzy reasoning determines the quality of reasoning algorithms to a large extent,which is quantified by calculating the disparity between the output of fuzzy reasoning with interference and the output without interference.Therefore,in this study,the interval robustness(embodied as the interval stability)of theα-UTI method is explored in the interval-valued fuzzy environment.To begin with,the stability of theα-UTI method is explored for the case of an individual rule,and the upper and lower bounds of its results are estimated,using four kinds of unified interval implications(including the R-interval implication,the S-interval implication,the QL-interval implication and the interval t-norm implication).Through analysis,it is found that theα-UTI method exhibits good interval stability for an individual rule.Moreover,the stability of theα-UTI method is revealed in the case of multiple rules,and the upper and lower bounds of its outcomes are estimated.The results show that theα-UTI method is stable for multiple rules when four kinds of unified interval implications are used,respectively.Lastly,theα-UTI reasoning chain method is presented,which contains a chain structure with multiple layers.The corresponding solutions and their interval perturbations are investigated.It is found that theα-UTI reasoning chain method is stable in the case of chain reasoning.Two application examples in affective computing are given to verify the stability of theα-UTImethod.In summary,through theoretical proof and example verification,it is found that theα-UTImethod has good interval robustness with four kinds of unified interval implications aiming at the situations of an individual rule,multi-rule and reasoning chain.展开更多
The aim of this paper is to discuss the approximate rea- soning problems with interval-valued fuzzy environments based on the fully implicational idea. First, this paper constructs a class of interval-valued fuzzy imp...The aim of this paper is to discuss the approximate rea- soning problems with interval-valued fuzzy environments based on the fully implicational idea. First, this paper constructs a class of interval-valued fuzzy implications by means of a type of impli- cations and a parameter on the unit interval, then uses them to establish fully implicational reasoning methods for interval-valued fuzzy modus ponens (IFMP) and interval-valued fuzzy modus tel- lens (IFMT) problems. At the same time the reversibility properties of these methods are analyzed and the reversible conditions are given. It is shown that the existing unified forms of α-triple I (the abbreviation of triple implications) methods for FMP and FMT can be seen as the particular cases of our methods for IFMP and IFMT.展开更多
With deep mining of coal mines, prospecting multilayer water-filled goaf has become a new content that results from geophysical exploration in coalfields. The central loop transient electromagnetic (TEM) method is f...With deep mining of coal mines, prospecting multilayer water-filled goaf has become a new content that results from geophysical exploration in coalfields. The central loop transient electromagnetic (TEM) method is favorable for prospecting conductive layers because of the coupling relationship between its field structure and formation. However, the shielding effect of conductive overburden would not only require a longer observation time when prospecting the same depth but also weaken the anomalous response of underlying layers. Through direct time domain numerical simulation and horizontal layered earth forward modeling, this paper estimates the length of observation time required to prospect the target, and the distinguishable criterion of multilayer water-filled goal is presented with observation error according to the effect of noise on observation data. The observed emf curves from Dazigou Coal Mine, Shanxi Province can distinguish multilayer water-filled goaf. In quantitative inversion interpretation of observed curves, using electric logging data as initial parameters restrains the equivalence caused by coal formation thin layers. The deduced three-layer and two-layer water-filled goals are confirmed by the drilling hole. The result suggests that when observation time is long enough and with the anomalous situation of underlying layers being greater than the observation error, the use of the central loop TEM method to orosoect a multilaver water-filled goaf is feasible.展开更多
This paper is based on the analysis and research on the silver-lead-zinc polymetallic ore in New Ballyhoo Banner in southern Manzhouli of Inner Mongolia.Because metal mineralization brings rock formations,the geophysi...This paper is based on the analysis and research on the silver-lead-zinc polymetallic ore in New Ballyhoo Banner in southern Manzhouli of Inner Mongolia.Because metal mineralization brings rock formations,the geophysical features such as low resistivity,high polarization rate and uneven distribution of magnetization,the comprehensive geophysical methods are adopted including high-precision magnetic measurement,high-power induced polarization,IP field middle gradient and controlled source audio-frequency magnetotellurics.In the survey work of multi-metal ore deposits,from surface sweeping to single point measurement,and from single point to section going deeper layer by layer,the resolution of measurement is continuously improved,and various geophysical methods support and complement each other,so explorers can successfully predict the direction,scale and volume of the metallogenic belts in conjunction with geochemical exploration,geological survey and drilling.It has provided a strong basis for completing the exploration task of predicting the reserve volume of ore bodies.The research conclusions of this exploration case have thus a high reference value in the same type of exploration work.展开更多
Objective: Clinical reasoning is an essential feature of health care practice; it is also a crucial ability for providing patient care of high quality. It has been identified that graduate nurses may lack the clinica...Objective: Clinical reasoning is an essential feature of health care practice; it is also a crucial ability for providing patient care of high quality. It has been identified that graduate nurses may lack the clinical reasoning skills to deliver safe and effective patient cam. It is therefore of paramount importance to enhance nursing students' clinical reasoning ability. High-fidelity simulation (HFS) is proved to be an effective teaching and learning method, which may also have some advantages over other teaching methods. Methods: The authors retrospectively reviewed the related literature, illustrated the application of high-fidelity simulation teaching method in nursing education, putting the focus on the use of it in teaching with clinical reasoning. Results: The application of high-fidelity simulation to nursing education can simulate the clinical situation, thus to create a safe, continuous and efficient learning environment for students, and it can effectively improve students' clinical reasoning ability. Conclusions: high-fidelity simulation is effective for clinical reasoning teaching in nursing education. The extension of its application in China should be of great value. The relevant further study is suggested focusing on how to overcome its own limitations and have it better applied in nursing education in China.展开更多
A new method is proposed to prospect copper deposits with portable XRF analyzer. The method is based on the close relation between Cu and the chalcophile elements or some other elements in the geochemical anomalies of...A new method is proposed to prospect copper deposits with portable XRF analyzer. The method is based on the close relation between Cu and the chalcophile elements or some other elements in the geochemical anomalies of a Cu deposit. Applications of the technique in Northeast China are presented.展开更多
Background: The prevalence of contraceptive use has increased worldwide due to the development and introduction of modern contraceptives and the establishment of organized family planning programs. In Nigeria, there i...Background: The prevalence of contraceptive use has increased worldwide due to the development and introduction of modern contraceptives and the establishment of organized family planning programs. In Nigeria, there is a very slow rise in contraceptive use prevalence, resulting in high fertility rate. Generally contraceptive is either used for birth spacing, or for the purpose of terminal fertility control to limit the number of children, and the choice of method for this purpose varies. Aims and Objectives: To determine the contraceptive methods of choice among clients seeking terminal fertility control, and their reasons for the choice of such methods. Materials and Methods: A cross-sectional study of clients attending the family planning clinic of Ladoke Akintola University of Technology Teaching hospital over a period of twenty-four months, between July, 2009 and June, 2011. All clients who had completed their family, and wanted a contraceptive method to limit their family size filled the semi-structured questionnaire after giving their informed consent. Clients’ own reasons for the choice of the particular contraceptive method were grouped, entered into SPSS work sheet, and analyzed using SPSS version 17. Result: There were five hundred and ninety-two new contraceptive method acceptors during the study period, of which 264 (44.6%) were for terminal fertility control. Progestogen-only injectable contraceptive was the method of choice for terminal fertility control by 145 (54.9%) of the clients, while 85 (32.2%) made intrauterine contraceptive device (copper-T) their method of choice, and the least chosen method was female surgical sterilization (2, 0.8%). Ease of administration, satisfaction with previous use, long duration of action, and husband’s preference were the reasons for the choice of the methods. Conclusion: There is awareness of terminal fertility control in Nigeria, especially in the southwestern region of the country, and this may be responsible for the decreasing prevalence of grandmultiparity in the region. However, reversible contraceptive method is the preferred option for this purpose.展开更多
The aim of this paper is to discuss the Triple Ⅰ restriction reasoning methods for fuzzy soft sets. Triple Ⅰ restriction principles for fuzzy soft modus ponens(FSMP) and fuzzy soft modus tollens(FSMT) are proposed, ...The aim of this paper is to discuss the Triple Ⅰ restriction reasoning methods for fuzzy soft sets. Triple Ⅰ restriction principles for fuzzy soft modus ponens(FSMP) and fuzzy soft modus tollens(FSMT) are proposed, and then, the general expressions of the Triple Ⅰ restriction reasoning method for FSMP and FSMT with respect to residual pairs are presented respectively. Finally, the optimal restriction solutions for Lukasiewicz and Godel implication operators are examined.展开更多
The Kuqa depression deposited thick rock salt,which has a lower density than surrounding rocks.When salt bodies form a certain scale,obvious negative gravity anomalies can be detected in the surface.Therefore,gravitat...The Kuqa depression deposited thick rock salt,which has a lower density than surrounding rocks.When salt bodies form a certain scale,obvious negative gravity anomalies can be detected in the surface.Therefore,gravitational method can quickly obtain the shape,plane distribution of deep-seated salt bodies and overall tectonic morphology of the basin.展开更多
Recently, a number of large molybdenum (-copper) deposits have been discovered successively in the Laba area, Shangri-La county, northwestern Yunnan province. The investigation confirmed that there is a superlarge por...Recently, a number of large molybdenum (-copper) deposits have been discovered successively in the Laba area, Shangri-La county, northwestern Yunnan province. The investigation confirmed that there is a superlarge porphyry-skarn hydrothermal vein type molybdenum-polymetallic- metallogenic system with the total prediction reservoir of more than 150 mt molybdenum. The porphyry intrusions contributed to the mineralization closely, the superficial little vein molybdenum (-copper, lead, silver) ore-bodies are usually located in faults and fractures, and the deep porphyry type ore-bodies occurred in the granodiorite porphyries, the skarn type ore-bodies occurred in the contact zone intrused into Triassic limestone or Permian basalts. Laba ore block is a new exploration area with great prospecting potential. In order to reduce the target area and guide the further exploration work, the magnetic method measurement about 3.3 square kilometres was carried out in the ore field. This paper presents an application of analyzing the horizontal and vertical derivative, using Fast Fourier Transform (FFT) filter (FFT high-pass, low-pass, cosine roll-off, suscepbility), calculated spectra frequency energy to predict the depth and intensity of the apparent remanence magnetization of source (Hilbert). The calculated results and magnetic anomalous show that the remanence anomaly is caused by the intrusions into the Triassic limestone and Permian basalts with small anomalies, and the depth of located source is not great. We have identified a number of positions to the three drilled well, the drilled result specify interpretation with very high accuracy. The magnetic method is helpful to identify porphyry mineralization, and judge the shape and depth of the concealed ore-bearing intrusive bodies under the similar geological condition.展开更多
This paper examines the history of China’s machine design methods and its status quo. First of all, it discusses machine design methods in ancient China. (1)The design idea of creation by the intelligent and expositi...This paper examines the history of China’s machine design methods and its status quo. First of all, it discusses machine design methods in ancient China. (1)The design idea of creation by the intelligent and exposition by the ingenious. (2)The design principle of the dependence of workmanship on criteria. (3)A macroscopic view of the object of design. (4)The design method of manufacture emphasizing shape. (5)Technological requirements on excellent material and consummate skill. Second, it discusses machine design ideas in ancient China. (1)The system idea in machine design, (2)The idea of machine design.(3)The idea of standardization in machine design. (4)The idea of automation in machine design. Finally, it discusses the status quo and a look ahead of the theory of machine design in China.展开更多
文摘The dual transmitter implements the equivalent anti-magnetic flux transient electromagnetic method, which can effectively reduce the scope of the transient electromagnetic detection blind area. However, this method is rarely reported in the detection of pipelines in urban geophysical exploration and the application of coal mines. Based on this, this paper realizes the equivalent anti-magnetic flux transient electromagnetic method based on the dual launcher. The suppression effect of this method on the blind area is analyzed by physical simulation. And the detection experiment of underground pipelines is carried out outdoors. The results show that the dual launcher can significantly reduce the turn-off time, thereby effectively reducing the impact of the blind area on the detection results, and the pipeline detection results verify the device’s effectiveness. Finally, based on the ground experimental results, the application prospect of mine advanced detection is discussed. Compared with other detection fields, the formation of blind areas is mainly caused by the equipment. If the dual launcher can be used to reduce the blind area, the accuracy of advanced detection can be improved more effectively. The above research results are of great significance for improving the detection accuracy of the underground transient electromagnetic method.
基金supported by National Key R&D Program of China(2022YFB2602203)Talent Fund of Beijing Jiaotong University(2021RC274,I22L00131)National Natural Science Foundation of China(U1934219,52202392,52022010,U22A2046,52172322,62271486,62120106011,52172323)。
文摘Railway Point System(RPS)is an important infrastructure in railway industry and its faults may have significant impacts on the safety and efficiency of train operations.For the fault diagnosis of RPS,most existing methods assume that sufficient samples of each failure mode are available,which may be unrealistic,especially for those modes of low occurrence frequency but with high risk.To address this issue,this work proposes a novel fault diagnosis method that only requires the power signals generated under normal RPS operations in the training stage.Specifically,the failure modes of RPS are distinguished through constructing a reasoning diagram,whose nodes are either binary logic problems or those that can be decomposed into the problems of the binary logic.Then,an unsupervised method for the signal segmentation and a fault detection method are combined to make decisions for each binary logic problem.Based on the results of decisions,the diagnostic rules are established to identify the failure modes.Finally,the data collected from multiple real-world RPSs are used for validation and the results demonstrate that the proposed method outperforms the benchmark in identifying the faults of RPSs.
文摘Extracting and synthesizing information from existing and massive amounts of geology spatial data sets is of great scientific significance and has considerable value in its applications. To make mineral exploration less expensive, more efficient, and more accurate, it is important to move beyond traditional concepts and establish a rapid, efficient, and intelligent method of predicting the existence and location of minerals. This paper describes a case-based reasoning (CBR) method for mineral prospectivity mapping that takes spatial features of geology data into account and offers an intelligent approach. This method include a metallogenic case representation that combines spatial and attribute features, metallogenic case-based storage organization, and a metallogenic case similarity retrieval model. The experiments were performed in the eastern Kunlun Mountains, China using CBR and weights-of-evidence (WOE), respectively. The results show that the prediction accuracy of the CBR is higher than that of the WOE.
基金the National Natural Science Foundation of China under Grants 62176083,62176084,61877016,and 61976078the Key Research and Development Program of Anhui Province under Grant 202004d07020004the Natural Science Foundation of Anhui Province under Grant 2108085MF203.
文摘Theα-universal triple I(α-UTI)method is a recognized scheme in the field of fuzzy reasoning,whichwas proposed by our research group previously.The robustness of fuzzy reasoning determines the quality of reasoning algorithms to a large extent,which is quantified by calculating the disparity between the output of fuzzy reasoning with interference and the output without interference.Therefore,in this study,the interval robustness(embodied as the interval stability)of theα-UTI method is explored in the interval-valued fuzzy environment.To begin with,the stability of theα-UTI method is explored for the case of an individual rule,and the upper and lower bounds of its results are estimated,using four kinds of unified interval implications(including the R-interval implication,the S-interval implication,the QL-interval implication and the interval t-norm implication).Through analysis,it is found that theα-UTI method exhibits good interval stability for an individual rule.Moreover,the stability of theα-UTI method is revealed in the case of multiple rules,and the upper and lower bounds of its outcomes are estimated.The results show that theα-UTI method is stable for multiple rules when four kinds of unified interval implications are used,respectively.Lastly,theα-UTI reasoning chain method is presented,which contains a chain structure with multiple layers.The corresponding solutions and their interval perturbations are investigated.It is found that theα-UTI reasoning chain method is stable in the case of chain reasoning.Two application examples in affective computing are given to verify the stability of theα-UTImethod.In summary,through theoretical proof and example verification,it is found that theα-UTImethod has good interval robustness with four kinds of unified interval implications aiming at the situations of an individual rule,multi-rule and reasoning chain.
基金supported by the National Natural Science Foundation of China(60774100)the Natural Science Foundation of Shandong Province of China(Y2007A15)
文摘The aim of this paper is to discuss the approximate rea- soning problems with interval-valued fuzzy environments based on the fully implicational idea. First, this paper constructs a class of interval-valued fuzzy implications by means of a type of impli- cations and a parameter on the unit interval, then uses them to establish fully implicational reasoning methods for interval-valued fuzzy modus ponens (IFMP) and interval-valued fuzzy modus tel- lens (IFMT) problems. At the same time the reversibility properties of these methods are analyzed and the reversible conditions are given. It is shown that the existing unified forms of α-triple I (the abbreviation of triple implications) methods for FMP and FMT can be seen as the particular cases of our methods for IFMP and IFMT.
基金supported by the National Science Foundation of China(No.41374129)Science and Technology Project of Shanxi Province(No.20100321066)Research and Development Project of National Major Scientifi c Research Equipment(No.ZDYZ2012-1-05-04)
文摘With deep mining of coal mines, prospecting multilayer water-filled goaf has become a new content that results from geophysical exploration in coalfields. The central loop transient electromagnetic (TEM) method is favorable for prospecting conductive layers because of the coupling relationship between its field structure and formation. However, the shielding effect of conductive overburden would not only require a longer observation time when prospecting the same depth but also weaken the anomalous response of underlying layers. Through direct time domain numerical simulation and horizontal layered earth forward modeling, this paper estimates the length of observation time required to prospect the target, and the distinguishable criterion of multilayer water-filled goal is presented with observation error according to the effect of noise on observation data. The observed emf curves from Dazigou Coal Mine, Shanxi Province can distinguish multilayer water-filled goaf. In quantitative inversion interpretation of observed curves, using electric logging data as initial parameters restrains the equivalence caused by coal formation thin layers. The deduced three-layer and two-layer water-filled goals are confirmed by the drilling hole. The result suggests that when observation time is long enough and with the anomalous situation of underlying layers being greater than the observation error, the use of the central loop TEM method to orosoect a multilaver water-filled goaf is feasible.
基金supported by Investigation and Evaluation of Groundwater Resources and Environmental Problems in Hetao Plain (Geological Survey Program, Grant No.1212010913010)
文摘This paper is based on the analysis and research on the silver-lead-zinc polymetallic ore in New Ballyhoo Banner in southern Manzhouli of Inner Mongolia.Because metal mineralization brings rock formations,the geophysical features such as low resistivity,high polarization rate and uneven distribution of magnetization,the comprehensive geophysical methods are adopted including high-precision magnetic measurement,high-power induced polarization,IP field middle gradient and controlled source audio-frequency magnetotellurics.In the survey work of multi-metal ore deposits,from surface sweeping to single point measurement,and from single point to section going deeper layer by layer,the resolution of measurement is continuously improved,and various geophysical methods support and complement each other,so explorers can successfully predict the direction,scale and volume of the metallogenic belts in conjunction with geochemical exploration,geological survey and drilling.It has provided a strong basis for completing the exploration task of predicting the reserve volume of ore bodies.The research conclusions of this exploration case have thus a high reference value in the same type of exploration work.
文摘Objective: Clinical reasoning is an essential feature of health care practice; it is also a crucial ability for providing patient care of high quality. It has been identified that graduate nurses may lack the clinical reasoning skills to deliver safe and effective patient cam. It is therefore of paramount importance to enhance nursing students' clinical reasoning ability. High-fidelity simulation (HFS) is proved to be an effective teaching and learning method, which may also have some advantages over other teaching methods. Methods: The authors retrospectively reviewed the related literature, illustrated the application of high-fidelity simulation teaching method in nursing education, putting the focus on the use of it in teaching with clinical reasoning. Results: The application of high-fidelity simulation to nursing education can simulate the clinical situation, thus to create a safe, continuous and efficient learning environment for students, and it can effectively improve students' clinical reasoning ability. Conclusions: high-fidelity simulation is effective for clinical reasoning teaching in nursing education. The extension of its application in China should be of great value. The relevant further study is suggested focusing on how to overcome its own limitations and have it better applied in nursing education in China.
文摘A new method is proposed to prospect copper deposits with portable XRF analyzer. The method is based on the close relation between Cu and the chalcophile elements or some other elements in the geochemical anomalies of a Cu deposit. Applications of the technique in Northeast China are presented.
文摘Background: The prevalence of contraceptive use has increased worldwide due to the development and introduction of modern contraceptives and the establishment of organized family planning programs. In Nigeria, there is a very slow rise in contraceptive use prevalence, resulting in high fertility rate. Generally contraceptive is either used for birth spacing, or for the purpose of terminal fertility control to limit the number of children, and the choice of method for this purpose varies. Aims and Objectives: To determine the contraceptive methods of choice among clients seeking terminal fertility control, and their reasons for the choice of such methods. Materials and Methods: A cross-sectional study of clients attending the family planning clinic of Ladoke Akintola University of Technology Teaching hospital over a period of twenty-four months, between July, 2009 and June, 2011. All clients who had completed their family, and wanted a contraceptive method to limit their family size filled the semi-structured questionnaire after giving their informed consent. Clients’ own reasons for the choice of the particular contraceptive method were grouped, entered into SPSS work sheet, and analyzed using SPSS version 17. Result: There were five hundred and ninety-two new contraceptive method acceptors during the study period, of which 264 (44.6%) were for terminal fertility control. Progestogen-only injectable contraceptive was the method of choice for terminal fertility control by 145 (54.9%) of the clients, while 85 (32.2%) made intrauterine contraceptive device (copper-T) their method of choice, and the least chosen method was female surgical sterilization (2, 0.8%). Ease of administration, satisfaction with previous use, long duration of action, and husband’s preference were the reasons for the choice of the methods. Conclusion: There is awareness of terminal fertility control in Nigeria, especially in the southwestern region of the country, and this may be responsible for the decreasing prevalence of grandmultiparity in the region. However, reversible contraceptive method is the preferred option for this purpose.
基金supported by the National Natural Science Foundation of China(61473239,61372187,61673320)
文摘The aim of this paper is to discuss the Triple Ⅰ restriction reasoning methods for fuzzy soft sets. Triple Ⅰ restriction principles for fuzzy soft modus ponens(FSMP) and fuzzy soft modus tollens(FSMT) are proposed, and then, the general expressions of the Triple Ⅰ restriction reasoning method for FSMP and FSMT with respect to residual pairs are presented respectively. Finally, the optimal restriction solutions for Lukasiewicz and Godel implication operators are examined.
基金financially supported by the project of investigation and evaluation of potash deposits in the Cretaceous-Tertiary salt basin of the Tarim basin from potash investigation project of China Geological Survey (No. 1212011220790)
文摘The Kuqa depression deposited thick rock salt,which has a lower density than surrounding rocks.When salt bodies form a certain scale,obvious negative gravity anomalies can be detected in the surface.Therefore,gravitational method can quickly obtain the shape,plane distribution of deep-seated salt bodies and overall tectonic morphology of the basin.
文摘Recently, a number of large molybdenum (-copper) deposits have been discovered successively in the Laba area, Shangri-La county, northwestern Yunnan province. The investigation confirmed that there is a superlarge porphyry-skarn hydrothermal vein type molybdenum-polymetallic- metallogenic system with the total prediction reservoir of more than 150 mt molybdenum. The porphyry intrusions contributed to the mineralization closely, the superficial little vein molybdenum (-copper, lead, silver) ore-bodies are usually located in faults and fractures, and the deep porphyry type ore-bodies occurred in the granodiorite porphyries, the skarn type ore-bodies occurred in the contact zone intrused into Triassic limestone or Permian basalts. Laba ore block is a new exploration area with great prospecting potential. In order to reduce the target area and guide the further exploration work, the magnetic method measurement about 3.3 square kilometres was carried out in the ore field. This paper presents an application of analyzing the horizontal and vertical derivative, using Fast Fourier Transform (FFT) filter (FFT high-pass, low-pass, cosine roll-off, suscepbility), calculated spectra frequency energy to predict the depth and intensity of the apparent remanence magnetization of source (Hilbert). The calculated results and magnetic anomalous show that the remanence anomaly is caused by the intrusions into the Triassic limestone and Permian basalts with small anomalies, and the depth of located source is not great. We have identified a number of positions to the three drilled well, the drilled result specify interpretation with very high accuracy. The magnetic method is helpful to identify porphyry mineralization, and judge the shape and depth of the concealed ore-bearing intrusive bodies under the similar geological condition.
文摘This paper examines the history of China’s machine design methods and its status quo. First of all, it discusses machine design methods in ancient China. (1)The design idea of creation by the intelligent and exposition by the ingenious. (2)The design principle of the dependence of workmanship on criteria. (3)A macroscopic view of the object of design. (4)The design method of manufacture emphasizing shape. (5)Technological requirements on excellent material and consummate skill. Second, it discusses machine design ideas in ancient China. (1)The system idea in machine design, (2)The idea of machine design.(3)The idea of standardization in machine design. (4)The idea of automation in machine design. Finally, it discusses the status quo and a look ahead of the theory of machine design in China.