期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
正癸烷热裂解实验和动力学模拟 被引量:9
1
作者 焦毅 李军 +4 位作者 王静波 王健礼 朱权 陈耀强 李象远 《物理化学学报》 SCIE CAS CSCD 北大核心 2011年第5期1061-1067,共7页
采用自制常压裂解装置,研究了正癸烷在温度范围为973-1123K,停留时间为0.5-2s时,热裂解主要气相产物氢气、甲烷和乙烯的分布情况.根据自主开发的机理生成软件ReaxGen,构建了正癸烷热裂解的详细机理,该机理包含1072步反应和281个物种.进... 采用自制常压裂解装置,研究了正癸烷在温度范围为973-1123K,停留时间为0.5-2s时,热裂解主要气相产物氢气、甲烷和乙烯的分布情况.根据自主开发的机理生成软件ReaxGen,构建了正癸烷热裂解的详细机理,该机理包含1072步反应和281个物种.进一步进行动力学模拟,并用实验结果进行了初步验证.结果表明,在反应的温度区间内,短的停留时间有利于乙烯和氢气的生成.通过敏感度分析,确定了常压下973K,停留时间为1s时影响氢气、甲烷和乙烯产量的主要反应步骤是烷基的重排和β裂解反应. 展开更多
关键词 热裂解 动力学模型 相对敏感度 正癸烷 reaxgen
下载PDF
高碳烃宽温度范围燃烧机理构建及动力学模拟 被引量:8
2
作者 郭俊江 唐石云 +1 位作者 李瑞 谈宁馨 《物理化学学报》 SCIE CAS CSCD 北大核心 2019年第2期182-192,共11页
发动机中燃料点火特性以及燃烧能量的释放对于发动机设计具有非常重要的作用,为了提高燃料的燃烧效率以及减少燃料在燃烧过程中污染物的排放,基于反应动力学机理对燃料燃烧过程的模拟就显得十分必要。因此需要更加深入的认识碳氢燃料的... 发动机中燃料点火特性以及燃烧能量的释放对于发动机设计具有非常重要的作用,为了提高燃料的燃烧效率以及减少燃料在燃烧过程中污染物的排放,基于反应动力学机理对燃料燃烧过程的模拟就显得十分必要。因此需要更加深入的认识碳氢燃料的燃烧机理,探索其在燃烧过程中十分复杂的化学反应网络。为了发展能够适用于实际燃料多工况条件(宽温度范围、宽压力范围和不同当量比)燃烧的燃烧机理,基于碳氢燃料机理自动生成程序ReaxGen构建了正癸烷燃烧详细机理(包含1499个物种,5713步反应)和正十一烷燃烧详细机理(包含1843个物种,6993步反应)。详细机理主要由小分子核心机理和高碳烃类(C5以上)机理两部分组成。为了验证机理的合理性与可靠性,本文对于高碳烃燃烧新机理在点火延时时间以及物种浓度曲线进行了动力学分析,并与实验数据及国内外同类机理进行了对比,结果表明本文提出的正癸烷和正十一烷燃烧新机理在比较宽泛的温度、压力和当量比条件下都具有较高的模拟精度,为发展精确航空煤油燃烧模型提供了基础数据。同时考虑到详细机理的复杂性以及机理分析的计算量大和时耗长,本文基于误差传播的直接关系图形(Directed Relation Graph with Error Propagation,DRGEP)方法简化得到的包含709组分2793反应的正癸烷和包含820组分3115反应的正十一烷简化机理,使用DRGEP方法时所采用的数据点选自压力范围从1.0×10~5 Pa到1.0×10~6Pa,当量比范围从0.5到2.0,初始温度范围从600到1400时恒压点火的模拟结果在点火延迟时间附近区域的抽样,同时在正癸烷机理简化中选取正癸烷、O_2和N_2作为初始预选组分,正十一烷的机理简化中主要选取正十一烷、O_2和N_2作为初始预选组分,得到的简化机理在比较宽泛的条件下的预测结果与详细机理吻合很好。最后结合敏感度分析方法分析了正癸烷和正十一烷的点火延迟敏感性,考察了机理中影响点火的关键反应。结果表明:这些机理能够合理描述正癸烷和正十一烷的自点火特性,在工程计算流体力学仿真设计中有很好的应用前景。 展开更多
关键词 reaxgen 正癸烷和正十一烷 宽温度范围燃烧机理 机理构建 机理验证
下载PDF
Theoretic heat sink simulation and experimental investigation of the pyrolysis of substituted cyclohexanes 被引量:1
3
作者 Daoan Sun Yongmei Du +5 位作者 Chunying Li Jianwei Zhang Juyou Lu Zhixuan Wang Jiaoyi Li Jian L 《Journal of Energy Chemistry》 SCIE EI CAS CSCD 2015年第1期119-125,共7页
Reaxgen program for the pyrolysis mechanism of cycloalkanes was adopted to simulate the heat sink of substituted cyclohexanes. Thermal cracking of cyclohexanes was performed to examine the cracking performance, wherei... Reaxgen program for the pyrolysis mechanism of cycloalkanes was adopted to simulate the heat sink of substituted cyclohexanes. Thermal cracking of cyclohexanes was performed to examine the cracking performance, wherein the substituent effects were detailedly discussed under supercritical condition. It was found that Reaxgen program played a good part in the screening and optimization of cyclohexanes. A good agreement with the experimental data for the mono-substituted and bi-substituted cyclohexanes was demonstrated, however, some deviation for the tri-substituted cyclohexanes were observed. The experiment results indicated that the gaseous product yield increased sharply for mono- substituted cyclohexanes with short substituents containing no more than two carbons. Nevertheless, continuous increase in the alkyl chain depressed the gaseous product yield smoothly. The cyclic substituent dramatically inhibited the pyrolysis of cyclohexanes. All the substituents but cyclohexyl had no obvious effect on the yield of hydrogen and olefins (≤C4). For bi-substituted cyclohexanes, the more close the distance between the two substituents, the higher the gaseous product yield was obtained. However, opposite result on the selectivity to hydrogen and olefins (≤C4) was generally obtained except 1,3-dimethylcyclohexane. The position of tri-substituents acted little significance on the gaseous product yield, as well as the selectivity to hydrogen and olefins (≤C4). 展开更多
关键词 reaxgen program PYROLYSIS heat sink substituted cyclohexanes gaseous product yield SELECTIVITY
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部