M-N-C(M=Fe,Co,Ni,etc.) catalyst owns high catalytic activity in the oxygen catalytic reaction which is the most likely to replace the Pt-based catalysts.But it is still a challenge to further increase the active site ...M-N-C(M=Fe,Co,Ni,etc.) catalyst owns high catalytic activity in the oxygen catalytic reaction which is the most likely to replace the Pt-based catalysts.But it is still a challenge to further increase the active site density.This article constructs the high-efficiency FeMn-N/S-C-1000 catalyst to realize ORR/OER bifunctional catalysis by hetero-atom,bimetal(Fe,Mn) doped simultaneously strategy.When evaluated it as bi-functional electro-catalysts,FeMn-N/S-C-1000 exhibits excellent catalytic activity(E_(1/2)=0.924 V,E_(j=10)=1.617 V) in alkaline media,outperforms conventional Pt/C,RuO_(2) and most non-precious-metal catalysts reported recently,Such outstanding performance is owing to N,S co-coordinated with metal to form multi-types of single atom,dual atom active sites to carry out bi-catalysis.Importantly,nitrite poison test provides the proof that the active sites of FeMn-N/S-C are more than that of single-atom catalysts to promote catalytic reactions directly.To better understand the local structure of Fe and Mn active sites,XAS and DFT were employed to reveal that FeMn-N_5/S-C site plays the key role during catalysis.Notably,the FeMn-N/S-C-1000 based low-temperature rechargeable flexible Zn-air also exhibits superior discharge performance and extraordinary durability at-40℃.This work will provide a new idea to design diatomic catalysts applied in low-temperature rechargeable batteries.展开更多
Precipitation infiltration serves as a significant source of groundwater in the Badain Jaran Desert.To investigate variations in precipitation infiltration within the desert,this study collected data on moisture conte...Precipitation infiltration serves as a significant source of groundwater in the Badain Jaran Desert.To investigate variations in precipitation infiltration within the desert,this study collected data on moisture content and temperature from the vadose zone through in-situ field monitoring.Utilizing these data,a numerical model is employed to explore the mechanism of groundwater recharge via precipitation.The results are as follows:(1)Moisture content and temperature in the shallow vadose zone exhibit significant seasonal variations,with moisture content diminishing with increasing depth;(2)Groundwater recharge via precipitation infiltration initially increases and then decreases with groundwater level depth(GWD).Peak groundwater recharge via precipitation occurs at a GWD of 0.75 m,decreasing to merely 0.012 cm at GWDs exceeding 2 m;(3)Groundwater is no longer susceptible to phreatic water evaporation when the GWD reaches approximately 3.7 m.Therefore,GWD plays a crucial role in governing groundwater recharge via precipitation in the Badain Jaran Desert.展开更多
The North China Plain is one of the main grain producing areas in China. However, overexploitation has long been unsustainable since the water supply is mainly from groundwater. Since 2014,the South-to-North Water Div...The North China Plain is one of the main grain producing areas in China. However, overexploitation has long been unsustainable since the water supply is mainly from groundwater. Since 2014,the South-to-North Water Diversion Project's central route has been charted to the integrated management of water supply and over-exploitation, which has alleviated the problem to a certain extent. Although the Ministry of Water Resources has made many efforts on groundwater recharge since 2018 most of which have been successful, the recharge has not yet been sufficiently focused on the repair of shallow groundwater depression zones. It still needs further optimization. This paper discusses this particular issue,proposes optimized recharge plan and provides the following recommendations:(1) Seven priority target areas are selected for groundwater recharge in alluvial and proluvial fans in the piedmont plain, and the storage capacity is estimated to be 181.00×10~8 m~3;(2) A recharge of 31.18×10~8 m~3/a is required by 2035 to achieve the repair target;(3) It is proposed to increase the recharge of Hutuo River, Dasha River and Tanghe River to 19.00×10~8 m~3/a and to rehabilitate Gaoliqing-Ningbailong Depression Zone;increase the recharge of Fuyang River, Zhanghe River and Anyang River to 7.05×10~8 m~3/a and rehabilitate Handan Feixiang-Guangping Depression Zone;increase the recharge of Luanhe River by 0.56×10~8 m~3/a and restore Tanghai Depression Zone and Luanan-Leting Depression Zone;moderately reduce the amount of water recharged to North Canal and Yongding River to prevent excessive rebound of groundwater;(4) Recharge through well is implemented on a pilot basis in areas of severe urban ground subsidence and coastal saltwater intrusion;(5) An early warning mechanism for groundwater quality risks in recharge areas is established to ensure the safety. The numerical groundwater flow model also proves reasonable groundwater level restoration in the depression zones by 2035.展开更多
Rechargeable aprotic Li-O_(2)batteries have attractea increasing attention due to their extremely high capacity,and it is very important to design appropriate strategies to synthesize efficient catalysts used as oxyge...Rechargeable aprotic Li-O_(2)batteries have attractea increasing attention due to their extremely high capacity,and it is very important to design appropriate strategies to synthesize efficient catalysts used as oxygen cathode.In present work,we present an expedient "instantaneous nucleation and epitaxial growth"(INEG) synthesis strategy for convenient and large-scale synthesis of ultrafine MOCPs nanoparticles(size 50-100 nm) with obvious advantages such as fast synthesis,high yields,low costs and reduced synthetic steps.The bimetallic Ru/Co-MOCPs are further pyrolyzed to obtain bimetallic Coand low content of Ru-based nanoparticles embedded within nitrogen-doped carbon(Ru/Co@N-C) as an efficient catalyst used in Li-O_(2)battery.The Ru/Co@N-C provides porous carbon framework for the ion transportation and O_(2)diffusion,and has large amounts of metal/nonmetal sites as active site to promote the oxygen reduction reaction(ORR)/oxygen evolution reaction(OER) in Li-O_(2)batteries.As a consequence,a high discharge specific capacity of 15246 mA h g^(-1)at 250 mA g^(-1), excellent rate capability at different current densities,and stable overpotential during cycling,are achieved.This work opened up a new understanding for the industrialized synthesis of ultrafine catalysts for Li-O_(2)batteries with excellent structural characteristics and electrochemical performance.展开更多
The present and future energy requirements of mankind can be fulfilled with sustained research and development efforts by global scientists.The purpose of this review paper is to provide an overview of the fundamental...The present and future energy requirements of mankind can be fulfilled with sustained research and development efforts by global scientists.The purpose of this review paper is to provide an overview of the fundamentals,recent advancements on Lithium and non-Lithium electrochemical rechargeable battery systems,and their future prospects.The initial part of this review paper is dedicated to the advancement and challenges faced by the conventional rechargeable batteries,such as lead-acid,Ni-Cd and Ni-MH batteries.The subsequent section of this review focuses on an in-depth analysis of two major categories of rechargeable batteries,namely lithium-based rechargeable battery systems and alternative non-Lithium rechargeable battery systems.The working principle,construction,and a few important research progress on Li-ion,Li-O_(2),Li-CO_(2) and Li-S batteries have been highlighted.The recent progress and challenges of the alternate batteries such as Na-ion,Na-S,Mg-ion,K-ion,Al-ion,Al-air,Zn-ion and Zn-air are also discussed in this review.The large gap between theoretical and practical electrochemical values for the alternate battery system must be filled by adopting a series of design architectures followed by modern instrumentation for developing next-generation batteries in a sustainable and efficient way.展开更多
Groundwater overexploitation is a serious problem in the Turpan Basin,Xinjiang Uygur Autonomous Region of China,causing groundwater level declines and ecological and environmental problems such as the desiccation of k...Groundwater overexploitation is a serious problem in the Turpan Basin,Xinjiang Uygur Autonomous Region of China,causing groundwater level declines and ecological and environmental problems such as the desiccation of karez wells and the shrinkage of lakes.Based on historical groundwater data and field survey data from 1959 to 2021,we comprehensively studied the evolution of groundwater recharge and discharge terms in the Turpan Basin using the groundwater equilibrium method,mathematical statistics,and GIS spatial analysis.The reasons for groundwater overexploitation were also discussed.The results indicated that groundwater recharge increased from 14.58×10^(8)m^(3)in 1959 to 15.69×10^(8)m^(3)in 1980,then continued to decrease to 6.77×10^(8)m^(3)in 2021.Groundwater discharge increased from 14.49×10^(8)m^(3)in 1959 to 16.02×10^(8)m^(3)in 1989,while continued to decrease to 9.97×10^(8)m^(3)in 2021.Since 1980,groundwater recharge-discharge balance has been broken,the decrease rate of groundwater recharge exceeded that of groundwater discharge and groundwater recharge was always lower than groundwater discharge,showing in a negative equilibrium,which caused the continuous decrease in groundwater level in the Turpan Basin.From 1980 to 2002,groundwater overexploitation increased rapidly,peaking from 2003 to 2011 with an average overexploitation rate of 4.79×10^(8)m^(3)/a;then,it slowed slightly from 2012 to 2021,and the cumulative groundwater overexploitation was 99.21×10^(8)m^(3)during 1980-2021.This research can provide a scientific foundation for the restoration and sustainable use of groundwater in the overexploited areas of the Turpan Basin.展开更多
The Qarhan Salt Lake(QSL)in western China is K-Sr-Li-B-Br-Rb multi-resource coexisting Quaternary brine deposits.Significant research efforts have been directed to the origin of K-Li resources and evolutionary history...The Qarhan Salt Lake(QSL)in western China is K-Sr-Li-B-Br-Rb multi-resource coexisting Quaternary brine deposits.Significant research efforts have been directed to the origin of K-Li resources and evolutionary history of the QSL.However,the study on the different sources,recharge processes,and differential distribution patterns for these resource elements in brine deposits is still inadequate.Therefore,we measured Li-B concentrations and H-O-Sr-B isotopic compositions of different waters(river,spring,and brine)from the QSL,combined with the reported K-Sr contents and multiple isotopes of waters,to discuss the recharge,source of K-Sr-Li-B and their spatial distributions,by analogy with other evaporite basins in the world.The results show that:(1)the K-Li-B-Sr elemental concentrations of brines and their spatial distribution in the QSL are diverse;(2)high K and Sr values are distributed in Dabuxun and Qarhan sections,respectively,which are controlled by Ca-Cl springs in the northern QSL;on the contrary,Li and B values are enriched in the Bieletan section and are charged by thermal springs in the Kunlun Mountains;(3)the formation and evolution of Ca-Cl and thermal springs constrain fundamentally on the recharge processes of K-Sr and Li-B elements in the terminal salt lakes of the Qaidam Basin(QB);(4)some analogues of recharge processes limit the resource elements of the QSL and other salt lakes(Da Qaidam,Lop Nur,Zhabuye,Atacama,and Guayatayoc)in the world provides a reference for the resource exploration in deep formation waters in the evaporite basins.展开更多
Cu-based cathodes in aqueous batteries become very attractive in view of high theoretical capacity,moderate operation voltage and rich reserves of raw materials.However,their applications are obstructed by serious sid...Cu-based cathodes in aqueous batteries become very attractive in view of high theoretical capacity,moderate operation voltage and rich reserves of raw materials.However,their applications are obstructed by serious side reactions.The side reaction mainly arises from the spontaneous formation of Cu_(2)O,which occupies the electrode surface and lowers the reaction reversibility.Here,Na_(2)EDTA is introduced to address these issues.Both experimental results and theoretical calculations indicate that the Na_(2)EDTA reshapes the solvation structure of Cu^(2+)and modifies the electrode/electrolyte interface.Therefore,the redox potential of Cu^(2+)/Cu_(2)O is reduced and the surface of Cu is protected from H2O,thereby inhibiting the formation of Cu_(2)O.Meanwhile,the change in the solvation structure reduces the electrostatic repulsion between Cu^(2+)and the cathode,leading to high local concentration and benefiting uniform deposition.The results shed light on the applications of rechargeable Cu-based batteries.展开更多
Zinc–bromine rechargeable batteries(ZBRBs)are one of the most powerful candidates for next-generation energy storage due to their potentially lower material cost,deep discharge capability,non-flammable electrolytes,r...Zinc–bromine rechargeable batteries(ZBRBs)are one of the most powerful candidates for next-generation energy storage due to their potentially lower material cost,deep discharge capability,non-flammable electrolytes,relatively long lifetime and good reversibility.However,many opportunities remain to improve the efficiency and stability of these batteries for long-life operation.Here,we discuss the device configurations,working mechanisms and performance evaluation of ZBRBs.Both non-flow(static)and flow-type cells are highlighted in detail in this review.The fundamental electrochemical aspects,including the key challenges and promising solutions,are discussed,with particular attention paid to zinc and bromine half-cells,as their performance plays a critical role in determining the electrochemical performance of the battery system.The following sections examine the key performance metrics of ZBRBs and assessment methods using various ex situ and in situ/operando techniques.The review concludes with insights into future developments and prospects for high-performance ZBRBs.展开更多
The next-generation energy storage systems such as fuel cells,metal-air batteries,and alkali metal(Li,Na)-chalcogen(S,Se)batteries have received increasing attention owing to their high energy density and low cost.How...The next-generation energy storage systems such as fuel cells,metal-air batteries,and alkali metal(Li,Na)-chalcogen(S,Se)batteries have received increasing attention owing to their high energy density and low cost.However,one of the main obstacles of these systems is the poor reaction kinetics in the involved chemical reactions.Therefore,it is essential to incorporate suitable and efficient catalysts into the cell.These years,single-atom catalysts(SACs)are emerging as a frontier in catalysis due to their maximum atom efficiency and unique reaction selectivity.For SACs fabrication,metal-organic frameworks(MOFs)have been confirmed as promising templates or precursors due to their high metal loadings,structural adjustability,porosity,and tailorable catalytic site.In this review,we summarize effective strategies for fabricating SACs by MOFs with corresponding advanced characterization techniques and illustrate the key role of MOFs-based SACs in these batteries by explaining their reaction mechanisms and challenges.Finally,current applications,prospects,and opportunities for MOFs-based SACs in energy storage systems are discussed.展开更多
Rational design and exploration of low-cost and robust bifunctional oxygen electrocatalysts are vitally important for developing high-performance zinc-air batteries(ZABs).Herein,we reported a facile yet cost-efficient...Rational design and exploration of low-cost and robust bifunctional oxygen electrocatalysts are vitally important for developing high-performance zinc-air batteries(ZABs).Herein,we reported a facile yet cost-efficient approach to construct a bifunctional oxygen reduction reaction(ORR)/oxygen evolution reaction(OER)electrocatalyst composed of N-doped porous carbon nanosheet flowers decorated with Fe Co nanoparticles(Fe Co/N-CF).Rational design of this catalyst is achieved by designing Schiff-base polymer with unique molecular structure via hydrogen bonding of cyanuramide and terephthalaldehyde polycondensate in the presence of metal cations.It exhibits excellent activity and stability for electrocatalysis of ORR/OER,enabling ZAB with a high peak power density of 172 m W cm^(-2)and a large specific capacity of 811 m A h g^(-1)Znat large current.The rechargeable ZAB demonstrates excellent durability for 1000 h with slight voltage decay,far outperforming a couple of precious Pt/Ir-based catalysts.Density functional theory(DFT)calculations reveal that high activity of bimetallic Fe Co stems from enhanced O_(2)and OH-adsorption and accelerated O_(2)dissociation by OAO bond activation.展开更多
The Cheria region in Northeastern Algeria has been facing aquifer overexploitation by the agricultural sector and prolonged droughts,resulting in a considerable decline in groundwater levels.This study investigates th...The Cheria region in Northeastern Algeria has been facing aquifer overexploitation by the agricultural sector and prolonged droughts,resulting in a considerable decline in groundwater levels.This study investigates the feasibility of implementing artificial recharge techniques to replenish the Eocene aquifer which serves as the primary water source in the Cheria region.A 3D transient numerical model,based on the finite difference method,was used to simulate groundwater flow from 2021 to 2031 using Visual MODFLOW Flex.During the modelling process,three scenarios were considered:(1)including pumping without a recharge,(2)recharge of the entire area through efficient infiltration without pumping,and(3)artificial recharge using river water infiltration basins at two sites,Draa Douamis sinkholes and Eocene limestone outcrops.The simulation results showed that aquifer exploitation without recharge caused significant drawdowns,which were 3 m to 7 m in the north-eastern part and 8 m to 12 m in the central and southern parts.In contrast,the second scenario,involving recharge without pumping,showed a rise in groundwater levels of 2 m to 2.7 m in the north-eastern part and 3 m to 3.62 m in the central and southern parts.The third scenario,employing artificial recharge,indicated a positive response to artificial recharge,with increased piezometric levels at the proposed sites,signifying a beneficial impact on the aquifer.These findings underline the potential of artificial recharge as a promising approach to address the groundwater depletion and environmental issues in the Cheria Basin.展开更多
Three-dimensional(3D)printing,an additive manufacturing technique,is widely employed for the fabrication of various electrochemical energy storage devices(EESDs),such as batteries and supercapacitors,ranging from nano...Three-dimensional(3D)printing,an additive manufacturing technique,is widely employed for the fabrication of various electrochemical energy storage devices(EESDs),such as batteries and supercapacitors,ranging from nanoscale to macroscale.This technique offers excellent manufacturing flexibility,geometric designability,cost-effectiveness,and eco-friendliness.Recent studies have focused on the utilization of 3D-printed critical materials for EESDs,which have demonstrated remarkable electrochemical performances,including high energy densities and rate capabilities,attributed to improved ion/electron transport abilities and fast kinetics.However,there is a lack of comprehensive reviews summarizing and discussing the recent advancements in the structural design and application of 3D-printed critical materials for EESDs,particularly rechargeable batteries.In this review,we primarily concentrate on the current progress in 3D printing(3DP)critical materials for emerging batteries.We commence by outlining the key characteristics of major 3DP methods employed for fabricating EESDs,encompassing design principles,materials selection,and optimization strategies.Subsequently,we summarize the recent advancements in 3D-printed critical materials(anode,cathode,electrolyte,separator,and current collector)for secondary batteries,including conventional Li-ion(LIBs),Na-ion(SIBs),K-ion(KIBs)batteries,as well as Li/Na/K/Zn metal batteries,Zn-air batteries,and Ni–Fe batteries.Within these sections,we discuss the 3DP precursor,design principles of 3D structures,and working mechanisms of the electrodes.Finally,we address the major challenges and potential applications in the development of 3D-printed critical materials for rechargeable batteries.展开更多
Two packet scheduling algorithms for rechargeable sensor networks are proposed based on the signal to interference plus noise ratio model.They allocate different transmission slots to conflicting packets and overcome ...Two packet scheduling algorithms for rechargeable sensor networks are proposed based on the signal to interference plus noise ratio model.They allocate different transmission slots to conflicting packets and overcome the challenges caused by the fact that the channel state changes quickly and is uncontrollable.The first algorithm proposes a prioritybased framework for packet scheduling in rechargeable sensor networks.Every packet is assigned a priority related to the transmission delay and the remaining energy of rechargeable batteries,and the packets with higher priority are scheduled first.The second algorithm mainly focuses on the energy efficiency of batteries.The priorities are related to the transmission distance of packets,and the packets with short transmission distance are scheduled first.The sensors are equipped with low-capacity rechargeable batteries,and the harvest-store-use model is used.We consider imperfect batteries.That is,the battery capacity is limited,and battery energy leaks over time.The energy harvesting rate,energy retention rate and transmission power are known.Extensive simulation results indicate that the battery capacity has little effect on the packet scheduling delay.Therefore,the algorithms proposed in this paper are very suitable for wireless sensor networks with low-capacity batteries.展开更多
Rechargeable magnesium batteries(RMBs)are considered the promising candidates for post lithium-ion batteries due to the abundant storage,high capacity,and dendrite-rare characteristic of Mg anode.However,the lack of p...Rechargeable magnesium batteries(RMBs)are considered the promising candidates for post lithium-ion batteries due to the abundant storage,high capacity,and dendrite-rare characteristic of Mg anode.However,the lack of practical electrolytes impedes the development and application of RMBs.Here,through a one-step reaction of LiCl congenital-containing Knochel–Hauser base TMPL(2,2,6,6-tetrame thylpiperidinylmagnesium chloride lithium chloride complex)with Lewis acid AlCl_(3),we successfully synthesized an efficient amino-magnesium halide TMPLA electrolyte.Raman and mass spectroscopy identified that the electrolyte comprises the typical di-nuclear copolymer[Mg_(2)Cl_(3)·6THF]+cation group and[(TMP)2AlCl_(2)]-anion group,further supported by the results of density functional theory calculations(DFT)and the Molecular dynamics(MD)simulations.The TMPLA electrolyte exhibits promising electrochemical performance,including available anodic stability(>2.65 V vs.SS),high ionic conductivity(6.05mS cm^(-1)),and low overpotential(<0.1 V)as well as appropriate Coulombic efficiency(97.3%)for Mg plating/stripping.Both the insertion Mo6S8cathode and conversion Cu S cathode delivered a desirable electrochemical performance with high capacity and good cycling stability based on the TMPLA electrolyte.In particular,when compatible with low cost and easily synthesized Cu S,the Cu S||Mg cell displayed an extremely high discharge capacity of 458.8 mAh g^(-1)for the first cycle and stabilized at 170.2 mAh g^(-1)with high Coulombic efficiency(99.1%)after 50 cycles at 0.05 C.Our work proposes an efficient electrolyte with impressive compatibility with Mg anode and insertion/conversion cathode for practical RMBs and provides a more profound knowledge of the Lewis acid–base reaction mechanisms.展开更多
Efficient bifunctional catalysts for oxygen reduction reaction(ORR)and oxygen evolution reaction(OER)are vital for rechargeable Zn-air batteries(ZABs).Herein,an oxygen-respirable sponge-like Co@C–O–Cs catalyst with ...Efficient bifunctional catalysts for oxygen reduction reaction(ORR)and oxygen evolution reaction(OER)are vital for rechargeable Zn-air batteries(ZABs).Herein,an oxygen-respirable sponge-like Co@C–O–Cs catalyst with oxygen-rich active sites was designed and constructed for both ORR and OER by a facile carbon dot-assisted strategy.The aerophilic triphase interface of Co@C–O–Cs cathode efficiently boosts oxygen diffusion and transfer.The theoretical calculations and experimental studies revealed that the Co–C–COC active sites can redistribute the local charge density and lower the reaction energy barrier.The Co@C–O–Cs catalyst displays superior bifunctional catalytic activities with a half-wave potential of 0.82 V for ORR and an ultralow overpotential of 294 mV at 10 mA cm^(−2) for OER.Moreover,it can drive the liquid ZABs with high peak power density(106.4 mW cm^(−2)),specific capacity(720.7 mAh g^(−1)),outstanding long-term cycle stability(over 750 cycles at 10 mA cm^(−2)),and exhibits excellent feasibility in flexible all-solid-state ZABs.These findings provide new insights into the rational design of efficient bifunctional oxygen catalysts in rechargeable metal-air batteries.展开更多
Rechargeable aluminum batteries(RABs)are attractive cadidates for next-generation energy storage and conversion,due to the low cost and high safety of Al resources,and high capacity of metal Al based on the three-elec...Rechargeable aluminum batteries(RABs)are attractive cadidates for next-generation energy storage and conversion,due to the low cost and high safety of Al resources,and high capacity of metal Al based on the three-electrons reaction mechanism.However,the development of RABs is greatly limited,because of the lack of advanced cathode materials,and their complicated and unclear reaction mechanisms.Exploring the novel nanostructured transition metal and carbon composites is an effective route for obtaining ideal cathode materials.In this work,we synthesize porous CoSnO_(3)/C nanocubes with oxygen vacancies for utilizing as cathodes in RABs for the first time.The intrinsic structure stability of the mixed metal cations and carbon coating can improve the cycling performance of cathodes by regulating the internal strains of the electrodes during volume expansion.The nanocubes with porous structures contribute to fast mass transportation which improves the rate capability.In addition to this,abundant oxygen vacancies promote the adsorption affinity of cathodes,which improves storage capacity.As a result,the CoSnO_(3)/C cathodes display an excellent reversible capacity of 292.1 mAh g^(-1) at 0.1 A g^(-1),a good rate performance with 109 mAh g^(-1) that is maintained even at 1 A g^(-1) and the provided stable cycling behavior for 500 cycles.Besides,a mechanism of intercalation of Al^(3+)within CoSnO_(3)/C cathode is proposed for the electrochemical process.Overall,this work provides a step toward the development of advanced cathode materials for RABs by engineering novel nanostructured mixed transition-metal oxides with carbon composite and proposes novel insights into chemistry for RABs.展开更多
The Group Ⅱ fresh groundwater bearing aquifers in the eastern plain of Tianjin underwent long term exploitation. This study shows that the area with greater water-level declining is associated with more rapid stratig...The Group Ⅱ fresh groundwater bearing aquifers in the eastern plain of Tianjin underwent long term exploitation. This study shows that the area with greater water-level declining is associated with more rapid stratigraphic compaction and consolidation. In the study area, the salty groundwater in the un-exploited overlying aquifers have the same dynamic characteristic of synchronization but different amplitude with the Group Ⅱ aquifers, showing that they have a close relationship. Cross-sectional study indicated that surface water, salty groundwater and underlying fresh groundwater belong to an integral water resources system. The compacted clay layers have the feature of semi-permeable membrane under alkaline condition. The infiltration of surface water is driven by the differences of osmotic pressure of salty water in each layer. When the water level difference between the Group Ⅱ aquifers and overlying salty aquifers is greater than osmotic water pressure difference, the salt water layer will desalinate downward and eventually, decreasing the water level of the upper aquifers, turning phreatic water amount supposed to evaporate to leakage recharge. Therefore, stopping mining groundwater in the Group Ⅱ aquifer will lead to other new environmental geology disaster.展开更多
It is a known fact that human activities have a significant impact on global rivers, making the task of rehabilitating them to their former natural state or a more semi-natural state quite challenging. The ongoing ini...It is a known fact that human activities have a significant impact on global rivers, making the task of rehabilitating them to their former natural state or a more semi-natural state quite challenging. The ongoing initiative called “Rejuvenation of Krishna River through Forestry Interventions” aims to contribute to the overall river rejuvenation program in the country. In this context, the effects of forestry interventions on the Krishna River will be evaluated based on water quantity, water quality, and the potential for carbon sequestration through plantation efforts. To assess the outcomes of this study, various methodologies such as Soil Conservation Service Curve Number (SCS-CN), Central Ground Water Board (CGWB) and Intergovernmental Panel on Climate Change (IPCC) have been utilized to estimate water savings, reduction in sedimentation, and carbon sequestration potential within the Krishna basin. The projected results indicate that the implementation of forestry plantations and soil and moisture conservation measures in the Krishna River rejuvenation program could lead to significant improvements. Specifically, the interventions are expected to enhance water recharge by 400.49 million cubic meters per year, reduce sedimentation load by 869.22 cubic meters per year, and increase carbon sequestration by 3.91 lakh metric tonnes per year or 14.34 lakh metric tonnes of CO<sub>2</sub> equivalent. By incorporating forestry interventions into the Krishna riverscape, it is anticipated that the quality and quantity of water flowing through the river will be positively impacted. These interventions will enhance water infiltration, mitigate soil erosion, and contribute to an improved vegetation cover, thereby conserving biodiversity. Moreover, they offer additional intangible benefits such as addressing climate change concerns through enhanced carbon sequestration potential along the entire stretch of riverine areas.展开更多
Groundwater levels are gradually declining in basins around the world due to anthropogenic and natural factors.Climate is not the only factor contributing to change in groundwater levels,population growth and economic...Groundwater levels are gradually declining in basins around the world due to anthropogenic and natural factors.Climate is not the only factor contributing to change in groundwater levels,population growth and economic progress are leading to increased water demand.Areas used for agricultural irrigation are expanding,necessitating the use of artificial groundwater recharge as a method to sustain pumping and enhance storage.The present study delineates potential locations of significant groundwater resources that already exist using a geostatistical approach as a method to identify potential groundwater recharge zones.The Multi-Influencing Factors(MIF)technique was applied to determine the relationship between different landscape and climatic factors that influence groundwater recharge.Factors include topography,climate,hydrogeology,population,economic change,and geology.Integration of these factors enabled the identification of potential locations of groundwater suitable for artificial recharge efforts based on weights derived through the MIF technique.We applied these weights to derive a groundwater recharge index(GRI)map.The map was delineated into three groundwater recharge zones classified by their potential areal coverage as a metric for recharge suitability,namely low,medium and high suitability,occupying areas of 8625 km2(30.06%),9082 km2(31.65%),and 10,989 km~2(38.29%),respectively.Our findings have important implications for designing sustainable groundwater development and land-use plans for the coming century.展开更多
基金supported by the National Natural Science Foundation of China(21603171)the Basic Research Foundation of Xi’an Jiaotong University(xjh012020027)。
文摘M-N-C(M=Fe,Co,Ni,etc.) catalyst owns high catalytic activity in the oxygen catalytic reaction which is the most likely to replace the Pt-based catalysts.But it is still a challenge to further increase the active site density.This article constructs the high-efficiency FeMn-N/S-C-1000 catalyst to realize ORR/OER bifunctional catalysis by hetero-atom,bimetal(Fe,Mn) doped simultaneously strategy.When evaluated it as bi-functional electro-catalysts,FeMn-N/S-C-1000 exhibits excellent catalytic activity(E_(1/2)=0.924 V,E_(j=10)=1.617 V) in alkaline media,outperforms conventional Pt/C,RuO_(2) and most non-precious-metal catalysts reported recently,Such outstanding performance is owing to N,S co-coordinated with metal to form multi-types of single atom,dual atom active sites to carry out bi-catalysis.Importantly,nitrite poison test provides the proof that the active sites of FeMn-N/S-C are more than that of single-atom catalysts to promote catalytic reactions directly.To better understand the local structure of Fe and Mn active sites,XAS and DFT were employed to reveal that FeMn-N_5/S-C site plays the key role during catalysis.Notably,the FeMn-N/S-C-1000 based low-temperature rechargeable flexible Zn-air also exhibits superior discharge performance and extraordinary durability at-40℃.This work will provide a new idea to design diatomic catalysts applied in low-temperature rechargeable batteries.
基金funded by China Geological Survey Program(121201106000150093).
文摘Precipitation infiltration serves as a significant source of groundwater in the Badain Jaran Desert.To investigate variations in precipitation infiltration within the desert,this study collected data on moisture content and temperature from the vadose zone through in-situ field monitoring.Utilizing these data,a numerical model is employed to explore the mechanism of groundwater recharge via precipitation.The results are as follows:(1)Moisture content and temperature in the shallow vadose zone exhibit significant seasonal variations,with moisture content diminishing with increasing depth;(2)Groundwater recharge via precipitation infiltration initially increases and then decreases with groundwater level depth(GWD).Peak groundwater recharge via precipitation occurs at a GWD of 0.75 m,decreasing to merely 0.012 cm at GWDs exceeding 2 m;(3)Groundwater is no longer susceptible to phreatic water evaporation when the GWD reaches approximately 3.7 m.Therefore,GWD plays a crucial role in governing groundwater recharge via precipitation in the Badain Jaran Desert.
基金funded by Geological Joint Fund of the National Natural Science Foundation of China (U2244214)China Geological Survey Program (DD20190336, DD20221752, DD20230078)+1 种基金Chinese Academy of Geological Sciences Basic Research Fund Program (SK202118, SK202216)Hebei Provincial Innovation Capacity Enhancement Program for High-level Talent Team Building (225A4204D)。
文摘The North China Plain is one of the main grain producing areas in China. However, overexploitation has long been unsustainable since the water supply is mainly from groundwater. Since 2014,the South-to-North Water Diversion Project's central route has been charted to the integrated management of water supply and over-exploitation, which has alleviated the problem to a certain extent. Although the Ministry of Water Resources has made many efforts on groundwater recharge since 2018 most of which have been successful, the recharge has not yet been sufficiently focused on the repair of shallow groundwater depression zones. It still needs further optimization. This paper discusses this particular issue,proposes optimized recharge plan and provides the following recommendations:(1) Seven priority target areas are selected for groundwater recharge in alluvial and proluvial fans in the piedmont plain, and the storage capacity is estimated to be 181.00×10~8 m~3;(2) A recharge of 31.18×10~8 m~3/a is required by 2035 to achieve the repair target;(3) It is proposed to increase the recharge of Hutuo River, Dasha River and Tanghe River to 19.00×10~8 m~3/a and to rehabilitate Gaoliqing-Ningbailong Depression Zone;increase the recharge of Fuyang River, Zhanghe River and Anyang River to 7.05×10~8 m~3/a and rehabilitate Handan Feixiang-Guangping Depression Zone;increase the recharge of Luanhe River by 0.56×10~8 m~3/a and restore Tanghai Depression Zone and Luanan-Leting Depression Zone;moderately reduce the amount of water recharged to North Canal and Yongding River to prevent excessive rebound of groundwater;(4) Recharge through well is implemented on a pilot basis in areas of severe urban ground subsidence and coastal saltwater intrusion;(5) An early warning mechanism for groundwater quality risks in recharge areas is established to ensure the safety. The numerical groundwater flow model also proves reasonable groundwater level restoration in the depression zones by 2035.
基金supported by the Department of Science and Technology of Guangdong Province(2019A050510043)。
文摘Rechargeable aprotic Li-O_(2)batteries have attractea increasing attention due to their extremely high capacity,and it is very important to design appropriate strategies to synthesize efficient catalysts used as oxygen cathode.In present work,we present an expedient "instantaneous nucleation and epitaxial growth"(INEG) synthesis strategy for convenient and large-scale synthesis of ultrafine MOCPs nanoparticles(size 50-100 nm) with obvious advantages such as fast synthesis,high yields,low costs and reduced synthetic steps.The bimetallic Ru/Co-MOCPs are further pyrolyzed to obtain bimetallic Coand low content of Ru-based nanoparticles embedded within nitrogen-doped carbon(Ru/Co@N-C) as an efficient catalyst used in Li-O_(2)battery.The Ru/Co@N-C provides porous carbon framework for the ion transportation and O_(2)diffusion,and has large amounts of metal/nonmetal sites as active site to promote the oxygen reduction reaction(ORR)/oxygen evolution reaction(OER) in Li-O_(2)batteries.As a consequence,a high discharge specific capacity of 15246 mA h g^(-1)at 250 mA g^(-1), excellent rate capability at different current densities,and stable overpotential during cycling,are achieved.This work opened up a new understanding for the industrialized synthesis of ultrafine catalysts for Li-O_(2)batteries with excellent structural characteristics and electrochemical performance.
基金the Education Department of the Government of Gujarat for providing fellowships under SHODH (Sc Heme of Developing High-Quality Researchresearch,Ref No:2021013725)for researchthe financial support received from Science and Engineering Research Board,Department of Science and Technology,Government of India (CRG/2022/008719)。
文摘The present and future energy requirements of mankind can be fulfilled with sustained research and development efforts by global scientists.The purpose of this review paper is to provide an overview of the fundamentals,recent advancements on Lithium and non-Lithium electrochemical rechargeable battery systems,and their future prospects.The initial part of this review paper is dedicated to the advancement and challenges faced by the conventional rechargeable batteries,such as lead-acid,Ni-Cd and Ni-MH batteries.The subsequent section of this review focuses on an in-depth analysis of two major categories of rechargeable batteries,namely lithium-based rechargeable battery systems and alternative non-Lithium rechargeable battery systems.The working principle,construction,and a few important research progress on Li-ion,Li-O_(2),Li-CO_(2) and Li-S batteries have been highlighted.The recent progress and challenges of the alternate batteries such as Na-ion,Na-S,Mg-ion,K-ion,Al-ion,Al-air,Zn-ion and Zn-air are also discussed in this review.The large gap between theoretical and practical electrochemical values for the alternate battery system must be filled by adopting a series of design architectures followed by modern instrumentation for developing next-generation batteries in a sustainable and efficient way.
基金supported by the Natural Science Foundation of Xinjiang Uygur Autonomous Region,China(2021D01A99)the National Natural Science Foundation of China(51969029).
文摘Groundwater overexploitation is a serious problem in the Turpan Basin,Xinjiang Uygur Autonomous Region of China,causing groundwater level declines and ecological and environmental problems such as the desiccation of karez wells and the shrinkage of lakes.Based on historical groundwater data and field survey data from 1959 to 2021,we comprehensively studied the evolution of groundwater recharge and discharge terms in the Turpan Basin using the groundwater equilibrium method,mathematical statistics,and GIS spatial analysis.The reasons for groundwater overexploitation were also discussed.The results indicated that groundwater recharge increased from 14.58×10^(8)m^(3)in 1959 to 15.69×10^(8)m^(3)in 1980,then continued to decrease to 6.77×10^(8)m^(3)in 2021.Groundwater discharge increased from 14.49×10^(8)m^(3)in 1959 to 16.02×10^(8)m^(3)in 1989,while continued to decrease to 9.97×10^(8)m^(3)in 2021.Since 1980,groundwater recharge-discharge balance has been broken,the decrease rate of groundwater recharge exceeded that of groundwater discharge and groundwater recharge was always lower than groundwater discharge,showing in a negative equilibrium,which caused the continuous decrease in groundwater level in the Turpan Basin.From 1980 to 2002,groundwater overexploitation increased rapidly,peaking from 2003 to 2011 with an average overexploitation rate of 4.79×10^(8)m^(3)/a;then,it slowed slightly from 2012 to 2021,and the cumulative groundwater overexploitation was 99.21×10^(8)m^(3)during 1980-2021.This research can provide a scientific foundation for the restoration and sustainable use of groundwater in the overexploited areas of the Turpan Basin.
基金Supported by the Second Tibetan Plateau Scientific Expedition and Research Program(No.2019 QZKK 0805)the National Natural Science Foundation of China(No.U 21 A 2018)the Foundation of Department of Qinghai Science&Technology(No.2020-ZJ-T 06)。
文摘The Qarhan Salt Lake(QSL)in western China is K-Sr-Li-B-Br-Rb multi-resource coexisting Quaternary brine deposits.Significant research efforts have been directed to the origin of K-Li resources and evolutionary history of the QSL.However,the study on the different sources,recharge processes,and differential distribution patterns for these resource elements in brine deposits is still inadequate.Therefore,we measured Li-B concentrations and H-O-Sr-B isotopic compositions of different waters(river,spring,and brine)from the QSL,combined with the reported K-Sr contents and multiple isotopes of waters,to discuss the recharge,source of K-Sr-Li-B and their spatial distributions,by analogy with other evaporite basins in the world.The results show that:(1)the K-Li-B-Sr elemental concentrations of brines and their spatial distribution in the QSL are diverse;(2)high K and Sr values are distributed in Dabuxun and Qarhan sections,respectively,which are controlled by Ca-Cl springs in the northern QSL;on the contrary,Li and B values are enriched in the Bieletan section and are charged by thermal springs in the Kunlun Mountains;(3)the formation and evolution of Ca-Cl and thermal springs constrain fundamentally on the recharge processes of K-Sr and Li-B elements in the terminal salt lakes of the Qaidam Basin(QB);(4)some analogues of recharge processes limit the resource elements of the QSL and other salt lakes(Da Qaidam,Lop Nur,Zhabuye,Atacama,and Guayatayoc)in the world provides a reference for the resource exploration in deep formation waters in the evaporite basins.
基金financial support from the Natural Science Foundation of Shandong Province(ZR2021ZD05)the Outstanding Talents in Shandong University。
文摘Cu-based cathodes in aqueous batteries become very attractive in view of high theoretical capacity,moderate operation voltage and rich reserves of raw materials.However,their applications are obstructed by serious side reactions.The side reaction mainly arises from the spontaneous formation of Cu_(2)O,which occupies the electrode surface and lowers the reaction reversibility.Here,Na_(2)EDTA is introduced to address these issues.Both experimental results and theoretical calculations indicate that the Na_(2)EDTA reshapes the solvation structure of Cu^(2+)and modifies the electrode/electrolyte interface.Therefore,the redox potential of Cu^(2+)/Cu_(2)O is reduced and the surface of Cu is protected from H2O,thereby inhibiting the formation of Cu_(2)O.Meanwhile,the change in the solvation structure reduces the electrostatic repulsion between Cu^(2+)and the cathode,leading to high local concentration and benefiting uniform deposition.The results shed light on the applications of rechargeable Cu-based batteries.
基金flnancial support from Australian Research Council through its Discovery,Future Fellowship ProgramsImam Mohammad Ibn Saud Islamic University (IMSIU) in Riyadh,Saudi Arabia,for flnancial support of this work.
文摘Zinc–bromine rechargeable batteries(ZBRBs)are one of the most powerful candidates for next-generation energy storage due to their potentially lower material cost,deep discharge capability,non-flammable electrolytes,relatively long lifetime and good reversibility.However,many opportunities remain to improve the efficiency and stability of these batteries for long-life operation.Here,we discuss the device configurations,working mechanisms and performance evaluation of ZBRBs.Both non-flow(static)and flow-type cells are highlighted in detail in this review.The fundamental electrochemical aspects,including the key challenges and promising solutions,are discussed,with particular attention paid to zinc and bromine half-cells,as their performance plays a critical role in determining the electrochemical performance of the battery system.The following sections examine the key performance metrics of ZBRBs and assessment methods using various ex situ and in situ/operando techniques.The review concludes with insights into future developments and prospects for high-performance ZBRBs.
基金Financial support was provided by the Guangdong College Students’Innovative Project(202110580014)the Guangdong “Climbing”Program for Research Items(pdjh2021b0544)。
文摘The next-generation energy storage systems such as fuel cells,metal-air batteries,and alkali metal(Li,Na)-chalcogen(S,Se)batteries have received increasing attention owing to their high energy density and low cost.However,one of the main obstacles of these systems is the poor reaction kinetics in the involved chemical reactions.Therefore,it is essential to incorporate suitable and efficient catalysts into the cell.These years,single-atom catalysts(SACs)are emerging as a frontier in catalysis due to their maximum atom efficiency and unique reaction selectivity.For SACs fabrication,metal-organic frameworks(MOFs)have been confirmed as promising templates or precursors due to their high metal loadings,structural adjustability,porosity,and tailorable catalytic site.In this review,we summarize effective strategies for fabricating SACs by MOFs with corresponding advanced characterization techniques and illustrate the key role of MOFs-based SACs in these batteries by explaining their reaction mechanisms and challenges.Finally,current applications,prospects,and opportunities for MOFs-based SACs in energy storage systems are discussed.
基金supported by the National Science Foundation of China(21805235)the Opening Foundation of Creative Platform of the Key Laboratory of the Education Department of Hunan Province(20K131)the Construct Program of the Key Discipline in Hunan Province。
文摘Rational design and exploration of low-cost and robust bifunctional oxygen electrocatalysts are vitally important for developing high-performance zinc-air batteries(ZABs).Herein,we reported a facile yet cost-efficient approach to construct a bifunctional oxygen reduction reaction(ORR)/oxygen evolution reaction(OER)electrocatalyst composed of N-doped porous carbon nanosheet flowers decorated with Fe Co nanoparticles(Fe Co/N-CF).Rational design of this catalyst is achieved by designing Schiff-base polymer with unique molecular structure via hydrogen bonding of cyanuramide and terephthalaldehyde polycondensate in the presence of metal cations.It exhibits excellent activity and stability for electrocatalysis of ORR/OER,enabling ZAB with a high peak power density of 172 m W cm^(-2)and a large specific capacity of 811 m A h g^(-1)Znat large current.The rechargeable ZAB demonstrates excellent durability for 1000 h with slight voltage decay,far outperforming a couple of precious Pt/Ir-based catalysts.Density functional theory(DFT)calculations reveal that high activity of bimetallic Fe Co stems from enhanced O_(2)and OH-adsorption and accelerated O_(2)dissociation by OAO bond activation.
文摘The Cheria region in Northeastern Algeria has been facing aquifer overexploitation by the agricultural sector and prolonged droughts,resulting in a considerable decline in groundwater levels.This study investigates the feasibility of implementing artificial recharge techniques to replenish the Eocene aquifer which serves as the primary water source in the Cheria region.A 3D transient numerical model,based on the finite difference method,was used to simulate groundwater flow from 2021 to 2031 using Visual MODFLOW Flex.During the modelling process,three scenarios were considered:(1)including pumping without a recharge,(2)recharge of the entire area through efficient infiltration without pumping,and(3)artificial recharge using river water infiltration basins at two sites,Draa Douamis sinkholes and Eocene limestone outcrops.The simulation results showed that aquifer exploitation without recharge caused significant drawdowns,which were 3 m to 7 m in the north-eastern part and 8 m to 12 m in the central and southern parts.In contrast,the second scenario,involving recharge without pumping,showed a rise in groundwater levels of 2 m to 2.7 m in the north-eastern part and 3 m to 3.62 m in the central and southern parts.The third scenario,employing artificial recharge,indicated a positive response to artificial recharge,with increased piezometric levels at the proposed sites,signifying a beneficial impact on the aquifer.These findings underline the potential of artificial recharge as a promising approach to address the groundwater depletion and environmental issues in the Cheria Basin.
基金supported by Stable Support Plan Program for Higher Education Institutions(20220815094504001)Shenzhen Key Laboratory of Advanced Energy Storage(No.ZDSYS20220401141000001).
文摘Three-dimensional(3D)printing,an additive manufacturing technique,is widely employed for the fabrication of various electrochemical energy storage devices(EESDs),such as batteries and supercapacitors,ranging from nanoscale to macroscale.This technique offers excellent manufacturing flexibility,geometric designability,cost-effectiveness,and eco-friendliness.Recent studies have focused on the utilization of 3D-printed critical materials for EESDs,which have demonstrated remarkable electrochemical performances,including high energy densities and rate capabilities,attributed to improved ion/electron transport abilities and fast kinetics.However,there is a lack of comprehensive reviews summarizing and discussing the recent advancements in the structural design and application of 3D-printed critical materials for EESDs,particularly rechargeable batteries.In this review,we primarily concentrate on the current progress in 3D printing(3DP)critical materials for emerging batteries.We commence by outlining the key characteristics of major 3DP methods employed for fabricating EESDs,encompassing design principles,materials selection,and optimization strategies.Subsequently,we summarize the recent advancements in 3D-printed critical materials(anode,cathode,electrolyte,separator,and current collector)for secondary batteries,including conventional Li-ion(LIBs),Na-ion(SIBs),K-ion(KIBs)batteries,as well as Li/Na/K/Zn metal batteries,Zn-air batteries,and Ni–Fe batteries.Within these sections,we discuss the 3DP precursor,design principles of 3D structures,and working mechanisms of the electrodes.Finally,we address the major challenges and potential applications in the development of 3D-printed critical materials for rechargeable batteries.
基金supported by the National Natural Science Foundation of China under Grants 62272256,61832012,and 61771289Major Program of Shandong Provincial Natural Science Foundation for the Fundamental Research under Grant ZR2022ZD03+1 种基金the Pilot Project for Integrated Innovation of Science,Education and Industry of Qilu University of Technology(Shandong Academy of Sciences)under Grant 2022XD001Shandong Province Fundamental Research under Grant ZR201906140028。
文摘Two packet scheduling algorithms for rechargeable sensor networks are proposed based on the signal to interference plus noise ratio model.They allocate different transmission slots to conflicting packets and overcome the challenges caused by the fact that the channel state changes quickly and is uncontrollable.The first algorithm proposes a prioritybased framework for packet scheduling in rechargeable sensor networks.Every packet is assigned a priority related to the transmission delay and the remaining energy of rechargeable batteries,and the packets with higher priority are scheduled first.The second algorithm mainly focuses on the energy efficiency of batteries.The priorities are related to the transmission distance of packets,and the packets with short transmission distance are scheduled first.The sensors are equipped with low-capacity rechargeable batteries,and the harvest-store-use model is used.We consider imperfect batteries.That is,the battery capacity is limited,and battery energy leaks over time.The energy harvesting rate,energy retention rate and transmission power are known.Extensive simulation results indicate that the battery capacity has little effect on the packet scheduling delay.Therefore,the algorithms proposed in this paper are very suitable for wireless sensor networks with low-capacity batteries.
基金financial support from the National Natural Science Foundation of China(Nos.21975159,2157316)the Shanghai Aerospace Science and Technology Innovation Fund(No.SAST2018-117)the Oceanic Interdisciplinary Program of Shanghai Jiao Tong University(No.WH410260401/006)。
文摘Rechargeable magnesium batteries(RMBs)are considered the promising candidates for post lithium-ion batteries due to the abundant storage,high capacity,and dendrite-rare characteristic of Mg anode.However,the lack of practical electrolytes impedes the development and application of RMBs.Here,through a one-step reaction of LiCl congenital-containing Knochel–Hauser base TMPL(2,2,6,6-tetrame thylpiperidinylmagnesium chloride lithium chloride complex)with Lewis acid AlCl_(3),we successfully synthesized an efficient amino-magnesium halide TMPLA electrolyte.Raman and mass spectroscopy identified that the electrolyte comprises the typical di-nuclear copolymer[Mg_(2)Cl_(3)·6THF]+cation group and[(TMP)2AlCl_(2)]-anion group,further supported by the results of density functional theory calculations(DFT)and the Molecular dynamics(MD)simulations.The TMPLA electrolyte exhibits promising electrochemical performance,including available anodic stability(>2.65 V vs.SS),high ionic conductivity(6.05mS cm^(-1)),and low overpotential(<0.1 V)as well as appropriate Coulombic efficiency(97.3%)for Mg plating/stripping.Both the insertion Mo6S8cathode and conversion Cu S cathode delivered a desirable electrochemical performance with high capacity and good cycling stability based on the TMPLA electrolyte.In particular,when compatible with low cost and easily synthesized Cu S,the Cu S||Mg cell displayed an extremely high discharge capacity of 458.8 mAh g^(-1)for the first cycle and stabilized at 170.2 mAh g^(-1)with high Coulombic efficiency(99.1%)after 50 cycles at 0.05 C.Our work proposes an efficient electrolyte with impressive compatibility with Mg anode and insertion/conversion cathode for practical RMBs and provides a more profound knowledge of the Lewis acid–base reaction mechanisms.
基金supported by the National Key Research and Development Program of China(No.2019YFC1907801)National Natural Science Foundation of China(No.52174286)+1 种基金the Science and Technology Innovation Program of Hunan Province(2021RC3014)Innovation-Driven Project of Central South University(No.2020CX007)。
文摘Efficient bifunctional catalysts for oxygen reduction reaction(ORR)and oxygen evolution reaction(OER)are vital for rechargeable Zn-air batteries(ZABs).Herein,an oxygen-respirable sponge-like Co@C–O–Cs catalyst with oxygen-rich active sites was designed and constructed for both ORR and OER by a facile carbon dot-assisted strategy.The aerophilic triphase interface of Co@C–O–Cs cathode efficiently boosts oxygen diffusion and transfer.The theoretical calculations and experimental studies revealed that the Co–C–COC active sites can redistribute the local charge density and lower the reaction energy barrier.The Co@C–O–Cs catalyst displays superior bifunctional catalytic activities with a half-wave potential of 0.82 V for ORR and an ultralow overpotential of 294 mV at 10 mA cm^(−2) for OER.Moreover,it can drive the liquid ZABs with high peak power density(106.4 mW cm^(−2)),specific capacity(720.7 mAh g^(−1)),outstanding long-term cycle stability(over 750 cycles at 10 mA cm^(−2)),and exhibits excellent feasibility in flexible all-solid-state ZABs.These findings provide new insights into the rational design of efficient bifunctional oxygen catalysts in rechargeable metal-air batteries.
基金supported by the National Natural Science Foundation of China (Grant No.22075028).
文摘Rechargeable aluminum batteries(RABs)are attractive cadidates for next-generation energy storage and conversion,due to the low cost and high safety of Al resources,and high capacity of metal Al based on the three-electrons reaction mechanism.However,the development of RABs is greatly limited,because of the lack of advanced cathode materials,and their complicated and unclear reaction mechanisms.Exploring the novel nanostructured transition metal and carbon composites is an effective route for obtaining ideal cathode materials.In this work,we synthesize porous CoSnO_(3)/C nanocubes with oxygen vacancies for utilizing as cathodes in RABs for the first time.The intrinsic structure stability of the mixed metal cations and carbon coating can improve the cycling performance of cathodes by regulating the internal strains of the electrodes during volume expansion.The nanocubes with porous structures contribute to fast mass transportation which improves the rate capability.In addition to this,abundant oxygen vacancies promote the adsorption affinity of cathodes,which improves storage capacity.As a result,the CoSnO_(3)/C cathodes display an excellent reversible capacity of 292.1 mAh g^(-1) at 0.1 A g^(-1),a good rate performance with 109 mAh g^(-1) that is maintained even at 1 A g^(-1) and the provided stable cycling behavior for 500 cycles.Besides,a mechanism of intercalation of Al^(3+)within CoSnO_(3)/C cathode is proposed for the electrochemical process.Overall,this work provides a step toward the development of advanced cathode materials for RABs by engineering novel nanostructured mixed transition-metal oxides with carbon composite and proposes novel insights into chemistry for RABs.
文摘The Group Ⅱ fresh groundwater bearing aquifers in the eastern plain of Tianjin underwent long term exploitation. This study shows that the area with greater water-level declining is associated with more rapid stratigraphic compaction and consolidation. In the study area, the salty groundwater in the un-exploited overlying aquifers have the same dynamic characteristic of synchronization but different amplitude with the Group Ⅱ aquifers, showing that they have a close relationship. Cross-sectional study indicated that surface water, salty groundwater and underlying fresh groundwater belong to an integral water resources system. The compacted clay layers have the feature of semi-permeable membrane under alkaline condition. The infiltration of surface water is driven by the differences of osmotic pressure of salty water in each layer. When the water level difference between the Group Ⅱ aquifers and overlying salty aquifers is greater than osmotic water pressure difference, the salt water layer will desalinate downward and eventually, decreasing the water level of the upper aquifers, turning phreatic water amount supposed to evaporate to leakage recharge. Therefore, stopping mining groundwater in the Group Ⅱ aquifer will lead to other new environmental geology disaster.
文摘It is a known fact that human activities have a significant impact on global rivers, making the task of rehabilitating them to their former natural state or a more semi-natural state quite challenging. The ongoing initiative called “Rejuvenation of Krishna River through Forestry Interventions” aims to contribute to the overall river rejuvenation program in the country. In this context, the effects of forestry interventions on the Krishna River will be evaluated based on water quantity, water quality, and the potential for carbon sequestration through plantation efforts. To assess the outcomes of this study, various methodologies such as Soil Conservation Service Curve Number (SCS-CN), Central Ground Water Board (CGWB) and Intergovernmental Panel on Climate Change (IPCC) have been utilized to estimate water savings, reduction in sedimentation, and carbon sequestration potential within the Krishna basin. The projected results indicate that the implementation of forestry plantations and soil and moisture conservation measures in the Krishna River rejuvenation program could lead to significant improvements. Specifically, the interventions are expected to enhance water recharge by 400.49 million cubic meters per year, reduce sedimentation load by 869.22 cubic meters per year, and increase carbon sequestration by 3.91 lakh metric tonnes per year or 14.34 lakh metric tonnes of CO<sub>2</sub> equivalent. By incorporating forestry interventions into the Krishna riverscape, it is anticipated that the quality and quantity of water flowing through the river will be positively impacted. These interventions will enhance water infiltration, mitigate soil erosion, and contribute to an improved vegetation cover, thereby conserving biodiversity. Moreover, they offer additional intangible benefits such as addressing climate change concerns through enhanced carbon sequestration potential along the entire stretch of riverine areas.
文摘Groundwater levels are gradually declining in basins around the world due to anthropogenic and natural factors.Climate is not the only factor contributing to change in groundwater levels,population growth and economic progress are leading to increased water demand.Areas used for agricultural irrigation are expanding,necessitating the use of artificial groundwater recharge as a method to sustain pumping and enhance storage.The present study delineates potential locations of significant groundwater resources that already exist using a geostatistical approach as a method to identify potential groundwater recharge zones.The Multi-Influencing Factors(MIF)technique was applied to determine the relationship between different landscape and climatic factors that influence groundwater recharge.Factors include topography,climate,hydrogeology,population,economic change,and geology.Integration of these factors enabled the identification of potential locations of groundwater suitable for artificial recharge efforts based on weights derived through the MIF technique.We applied these weights to derive a groundwater recharge index(GRI)map.The map was delineated into three groundwater recharge zones classified by their potential areal coverage as a metric for recharge suitability,namely low,medium and high suitability,occupying areas of 8625 km2(30.06%),9082 km2(31.65%),and 10,989 km~2(38.29%),respectively.Our findings have important implications for designing sustainable groundwater development and land-use plans for the coming century.