Applying numerical simulation technology to investigate fluid-solid interaction involving complex curved bound-aries is vital in aircraft design,ocean,and construction engineering.However,current methods such as Latti...Applying numerical simulation technology to investigate fluid-solid interaction involving complex curved bound-aries is vital in aircraft design,ocean,and construction engineering.However,current methods such as Lattice Boltzmann(LBM)and the immersion boundary method based on solid ratio(IMB)have limitations in identifying custom curved boundaries.Meanwhile,IBM based on velocity correction(IBM-VC)suffers from inaccuracies and numerical instability.Therefore,this study introduces a high-accuracy curve boundary recognition method(IMB-CB),which identifies boundary nodes by moving the search box,and corrects the weighting function in LBM by calculating the solid ratio of the boundary nodes,achieving accurate recognition of custom curve boundaries.In addition,curve boundary image and dot methods are utilized to verify IMB-CB.The findings revealed that IMB-CB can accurately identify the boundary,showing an error of less than 1.8%with 500 lattices.Also,the flow in the custom curve boundary and aerodynamic characteristics of the NACA0012 airfoil are calculated and compared to IBM-VC.Results showed that IMB-CB yields lower lift and drag coefficient errors than IBM-VC,with a 1.45%drag coefficient error.In addition,the characteristic curve of IMB-CB is very stable,whereas that of IBM-VC is not.For the moving boundary problem,LBM-IMB-CB with discrete element method(DEM)is capable of accurately simulating the physical phenomena of multi-moving particle flow in complex curved pipelines.This research proposes a new curve boundary recognition method,which can significantly promote the stability and accuracy of fluid-solid interaction simulations and thus has huge applications in engineering.展开更多
To address the randomness of target aspect angle and the incompleteness of observed target in inverse synthetic aperture sonar(ISAS) imaging,a method for target recognition is proposed based on topology vector feat...To address the randomness of target aspect angle and the incompleteness of observed target in inverse synthetic aperture sonar(ISAS) imaging,a method for target recognition is proposed based on topology vector feature(TVF) of multiple highlights. Analysis of the projection relationship from 3 D space to 2 D imaging plane in ISAS indicates that the distance between two highlights in the cross-range scale calibrated image is determined by the distance between the corresponding physical scattering centers. Then, TVFs of different targets, which remain stable in various possibilities of target aspect angle, can be built. K-means clustering technique is used to effectively alleviate effect of the point missing due to incompleteness of the observed target. A nearest neighbor classifier is used to realize the target recognition. The ISAS experimental results using underwater scaled models are provided to demonstrate the effectiveness of the proposed method. A classification rate of 84.0% is reached.展开更多
With the development of microarray technology,more and more microarray-based oncology studies have been carried out.Huge amounts of data and the complexity of cancer mechanisms make data analysis methods a much more i...With the development of microarray technology,more and more microarray-based oncology studies have been carried out.Huge amounts of data and the complexity of cancer mechanisms make data analysis methods a much more important part of these studies.In this article,we will mainly focus on the pattern recognition methods used in oncology studies.According to the availability of sample information,the unsupervised methods and supervised methods are reviewed separately.Finally,some possible future directions are proposed.展开更多
This paper mainly studies the data characteristics of high order cumulants using digitally modulated signals, and constructs the identification feature parameters that can distinguish the signal modulation type by the...This paper mainly studies the data characteristics of high order cumulants using digitally modulated signals, and constructs the identification feature parameters that can distinguish the signal modulation type by the high-order cumulants data of the digital modulation signal. Set the identification signal modulation type determination threshold based on the value of the identification feature parameter. The identification feature parameter value of the signal modulation type is compared with the set determination threshold, to realize the recognition of digital modulation signal. This identification method is implemented based on MATLAB design, with a 2ASK (2-ary Amplitude Shift Keying) signal, 4ASK (4-ary Amplitude Shift Keying) signal, 2PSK (2-ary Phase Shift Keying) signal, 4PSK (4-ary Phase Shift Keying) signal, 2FSK (2-ary Frequency Shift Keying) signal, 4FSK (4-ary Frequency Shift Keying) signal. The second, fourth and sixth order cumulants of the six signals were analyzed. Calculate the selected identification feature parameter value and the determination threshold to identify the six signals. The six signals have made MATLAB identification simulation. Simulation results show that this method is feasible and has high recognition rate. Simulation results verify that such recognition methods maintain a high recognition rate under conditions with low signal-to-noise ratio. This identification method can be extended to more MASK (M-ary Amplitude Shift Keying), MPSK (M-ary Phase Shift Keying), MFSK (M-ary Frequency Shift Keying), MQAM (M-ary Quadrature Amplitude Modulation) signal identification.展开更多
Automatic identification of characters marked on billets is very important for steelworks to achieve manu- facturing and logistics informatization management. Due to the presence of adhesions, fractures, blurs, and ot...Automatic identification of characters marked on billets is very important for steelworks to achieve manu- facturing and logistics informatization management. Due to the presence of adhesions, fractures, blurs, and other problems in characters painted on billets, character recognition accuracy with machine vision is relatively low, and hardly meets practical application requirements. To make the character recognition results more reliable and accu- rate, an identification results classification and post-pro- cessing method has been proposed in this paper. By analyzing issues in the image segmentation and recognition stage, the recognition result classification model, based on character encoding rules and recognition confidence, is built, and the character recognition results can be classified as correct, suspect, or wrong. In the post-processing stage, a human-machine-cooperation mechanism with a post- processing interface is designed to eliminate error infor- mation in suspect and wrong types. The system was developed and experiments conducted with images acquired in an iron and steel factory. The results show the character recognition accuracy to be approximately 89% using the character recognizer. However, this result cannot be directly applied in information management systems. With the proposed post-processing method, a human worker will query the suspect and wrong results classified by the system, determine whether the result is correct or wrong, and then, correct the wrong result through the post-processing interface. Using this method, the character recognition accuracy ultimately improves to 99.4%. Thus, the results will be more reliable applied in a practical system.展开更多
A method, called Two-Dimensional Extended Attribute Grammars (2-DEAGs). for the recognition of hand-printed Chinese characters is presented. This method uses directly two dimensional information, and pro- vides a sche...A method, called Two-Dimensional Extended Attribute Grammars (2-DEAGs). for the recognition of hand-printed Chinese characters is presented. This method uses directly two dimensional information, and pro- vides a scheme for dealing with various kinds of specific cases in a uniform way. In this method, components are drawn in guided and redundant way and reductions are made level by level just in accordance with the com- ponent combination relations of Chinese characters. The method provides also polysemous grammars, coexisting grammars and structure inferrings which constrain redundant recognition by comparison among similar characters or components and greatly increase the tolerance ability to distortion.展开更多
Chemical sensor arrays can obtain more comprehensive analyte information through high-dimensional data.It is of great significance in the analysis of multi-component complex samples.This review summarizes the developm...Chemical sensor arrays can obtain more comprehensive analyte information through high-dimensional data.It is of great significance in the analysis of multi-component complex samples.This review summarizes the development and status of chemical sensor arrays.We focused on the design of chemical sensor arrays based on various sensing materials.In addition,several pattern recognition methods in chemometrics are introduced.And applications of chemical sensor arrays in food monitoring,medical diagnosis,and environmental monitoring are illustrated.Based on the analysis of the limitations of current sensor array technology,the direction of the array is also predicted.This review aims to help the broad readership understand the research state of chemical sensor arrays and their development prospects.展开更多
The important indicators to measure the goodness of rigid fruit and vegetable picking robot have two aspects,the first is the reasonable structural design of the end-effector,and the second is having a high precision ...The important indicators to measure the goodness of rigid fruit and vegetable picking robot have two aspects,the first is the reasonable structural design of the end-effector,and the second is having a high precision positioning recognition method.Many researchers have done a lot of work in these two aspects,and a variety of end-effector structures and advanced position recognition methods are constantly appearing in people’s view.The working principle,structural characteristics,advantages and disadvantages of each end-effector are summarized to help us design better fruit and vegetable picking robot.The authors start from the rigid fruit and vegetable picking robot grasping methods,separation methods,and position recognition methods,firstly introduce three different grasping methods and the characteristics of the two separation methods,then introduce the under-driven picking robot developed on the basis of the traditional rigid picking robot,then explain the single special,multi-feature,and deep learning location position recognition methods currently used,and finally make a summary and outlook on the rigid fruit and vegetable picking robot from the structural development and position recognition methods.展开更多
基金WJD,JYZ,CLC,ZX,and ZGY were supported by the National Natural Science Foundation of China(Grant Number 51705143)the Education Department of Hunan Province(Grant Number 22B0464)the Postgraduate Scientific Research Innovation Project of Hunan Province(Grant Number QL20230249).
文摘Applying numerical simulation technology to investigate fluid-solid interaction involving complex curved bound-aries is vital in aircraft design,ocean,and construction engineering.However,current methods such as Lattice Boltzmann(LBM)and the immersion boundary method based on solid ratio(IMB)have limitations in identifying custom curved boundaries.Meanwhile,IBM based on velocity correction(IBM-VC)suffers from inaccuracies and numerical instability.Therefore,this study introduces a high-accuracy curve boundary recognition method(IMB-CB),which identifies boundary nodes by moving the search box,and corrects the weighting function in LBM by calculating the solid ratio of the boundary nodes,achieving accurate recognition of custom curve boundaries.In addition,curve boundary image and dot methods are utilized to verify IMB-CB.The findings revealed that IMB-CB can accurately identify the boundary,showing an error of less than 1.8%with 500 lattices.Also,the flow in the custom curve boundary and aerodynamic characteristics of the NACA0012 airfoil are calculated and compared to IBM-VC.Results showed that IMB-CB yields lower lift and drag coefficient errors than IBM-VC,with a 1.45%drag coefficient error.In addition,the characteristic curve of IMB-CB is very stable,whereas that of IBM-VC is not.For the moving boundary problem,LBM-IMB-CB with discrete element method(DEM)is capable of accurately simulating the physical phenomena of multi-moving particle flow in complex curved pipelines.This research proposes a new curve boundary recognition method,which can significantly promote the stability and accuracy of fluid-solid interaction simulations and thus has huge applications in engineering.
基金supported by the National Natural Science Foundation of China(41676024,41376040,41276039,61271391,61671061)the Post-doctor Foundation of Shaanxi Province(2017BSHQYXMZZ04)the Post-doctor Foundation of the 705th Research Institute,CSIC
文摘To address the randomness of target aspect angle and the incompleteness of observed target in inverse synthetic aperture sonar(ISAS) imaging,a method for target recognition is proposed based on topology vector feature(TVF) of multiple highlights. Analysis of the projection relationship from 3 D space to 2 D imaging plane in ISAS indicates that the distance between two highlights in the cross-range scale calibrated image is determined by the distance between the corresponding physical scattering centers. Then, TVFs of different targets, which remain stable in various possibilities of target aspect angle, can be built. K-means clustering technique is used to effectively alleviate effect of the point missing due to incompleteness of the observed target. A nearest neighbor classifier is used to realize the target recognition. The ISAS experimental results using underwater scaled models are provided to demonstrate the effectiveness of the proposed method. A classification rate of 84.0% is reached.
基金supported in part by the National Natural Science Foundation of China (Grant Nos.60575014,30625012 and 60721003)National High-tech R&D Program (No.2006AA02Z325).
文摘With the development of microarray technology,more and more microarray-based oncology studies have been carried out.Huge amounts of data and the complexity of cancer mechanisms make data analysis methods a much more important part of these studies.In this article,we will mainly focus on the pattern recognition methods used in oncology studies.According to the availability of sample information,the unsupervised methods and supervised methods are reviewed separately.Finally,some possible future directions are proposed.
文摘This paper mainly studies the data characteristics of high order cumulants using digitally modulated signals, and constructs the identification feature parameters that can distinguish the signal modulation type by the high-order cumulants data of the digital modulation signal. Set the identification signal modulation type determination threshold based on the value of the identification feature parameter. The identification feature parameter value of the signal modulation type is compared with the set determination threshold, to realize the recognition of digital modulation signal. This identification method is implemented based on MATLAB design, with a 2ASK (2-ary Amplitude Shift Keying) signal, 4ASK (4-ary Amplitude Shift Keying) signal, 2PSK (2-ary Phase Shift Keying) signal, 4PSK (4-ary Phase Shift Keying) signal, 2FSK (2-ary Frequency Shift Keying) signal, 4FSK (4-ary Frequency Shift Keying) signal. The second, fourth and sixth order cumulants of the six signals were analyzed. Calculate the selected identification feature parameter value and the determination threshold to identify the six signals. The six signals have made MATLAB identification simulation. Simulation results show that this method is feasible and has high recognition rate. Simulation results verify that such recognition methods maintain a high recognition rate under conditions with low signal-to-noise ratio. This identification method can be extended to more MASK (M-ary Amplitude Shift Keying), MPSK (M-ary Phase Shift Keying), MFSK (M-ary Frequency Shift Keying), MQAM (M-ary Quadrature Amplitude Modulation) signal identification.
文摘Automatic identification of characters marked on billets is very important for steelworks to achieve manu- facturing and logistics informatization management. Due to the presence of adhesions, fractures, blurs, and other problems in characters painted on billets, character recognition accuracy with machine vision is relatively low, and hardly meets practical application requirements. To make the character recognition results more reliable and accu- rate, an identification results classification and post-pro- cessing method has been proposed in this paper. By analyzing issues in the image segmentation and recognition stage, the recognition result classification model, based on character encoding rules and recognition confidence, is built, and the character recognition results can be classified as correct, suspect, or wrong. In the post-processing stage, a human-machine-cooperation mechanism with a post- processing interface is designed to eliminate error infor- mation in suspect and wrong types. The system was developed and experiments conducted with images acquired in an iron and steel factory. The results show the character recognition accuracy to be approximately 89% using the character recognizer. However, this result cannot be directly applied in information management systems. With the proposed post-processing method, a human worker will query the suspect and wrong results classified by the system, determine whether the result is correct or wrong, and then, correct the wrong result through the post-processing interface. Using this method, the character recognition accuracy ultimately improves to 99.4%. Thus, the results will be more reliable applied in a practical system.
基金Supported by the National Natural Science Foundation of China,No.6883024.
文摘A method, called Two-Dimensional Extended Attribute Grammars (2-DEAGs). for the recognition of hand-printed Chinese characters is presented. This method uses directly two dimensional information, and pro- vides a scheme for dealing with various kinds of specific cases in a uniform way. In this method, components are drawn in guided and redundant way and reductions are made level by level just in accordance with the com- ponent combination relations of Chinese characters. The method provides also polysemous grammars, coexisting grammars and structure inferrings which constrain redundant recognition by comparison among similar characters or components and greatly increase the tolerance ability to distortion.
基金funded by Natural Science Foundation of Heilongjiang Province(No.LH2022B004)Fundamental Research Funds for the Central Universities(No.2572022DJ01)+1 种基金111 Project(No.B20088)Heilongjiang Touyan Innovation Team Program(Tree Genetics and Breeding Innovation Team)。
文摘Chemical sensor arrays can obtain more comprehensive analyte information through high-dimensional data.It is of great significance in the analysis of multi-component complex samples.This review summarizes the development and status of chemical sensor arrays.We focused on the design of chemical sensor arrays based on various sensing materials.In addition,several pattern recognition methods in chemometrics are introduced.And applications of chemical sensor arrays in food monitoring,medical diagnosis,and environmental monitoring are illustrated.Based on the analysis of the limitations of current sensor array technology,the direction of the array is also predicted.This review aims to help the broad readership understand the research state of chemical sensor arrays and their development prospects.
基金supported by the National Natural Science Foundation of China(Grant No.51775002)the 14th Five-Year Plan of Beijing Education Science(Grant No.CDDB21173).
文摘The important indicators to measure the goodness of rigid fruit and vegetable picking robot have two aspects,the first is the reasonable structural design of the end-effector,and the second is having a high precision positioning recognition method.Many researchers have done a lot of work in these two aspects,and a variety of end-effector structures and advanced position recognition methods are constantly appearing in people’s view.The working principle,structural characteristics,advantages and disadvantages of each end-effector are summarized to help us design better fruit and vegetable picking robot.The authors start from the rigid fruit and vegetable picking robot grasping methods,separation methods,and position recognition methods,firstly introduce three different grasping methods and the characteristics of the two separation methods,then introduce the under-driven picking robot developed on the basis of the traditional rigid picking robot,then explain the single special,multi-feature,and deep learning location position recognition methods currently used,and finally make a summary and outlook on the rigid fruit and vegetable picking robot from the structural development and position recognition methods.