Ultrahydrophobic melamine sponge via interfacial modification with reduced graphene oxide/titanium dioxide nanocomposite and polydimethylsiloxane for oily wastewater treatment

Three-dimensional(3D)porous absorbents have attracted significant attention in the oily wastewater treatment technology due to their high porosity and elasticity.Given their amphiphilic surface,they have a propensity to simultaneously absorb water and oil,which restricts their range of applications.In this study,a reduced graphene oxide and titanium dioxide nanocomposite(rGO/TiO_(2))was used to fabricate an ultra-hydrophobic melamine sponge(MS)through interfacial modification using a solution immersion technique.To further modify it,poly-dimethylsiloxane(PDMS)was grafted onto its surface to establish stronger covalent bonds with the composite.The water contact angle of the sponge(rGO/TiO_(2)/PDMS/MS)was 164.2°,which satisfies the condition for ultrahydrophobicity.The evidence of its water repellency was demonstrated by the Cassie-Baxter theory and the lotus leaf effect.As a result of the increased density of rGO/TiO_(2)/PDMS/MS,it recorded an initial capacity that was 2 g/g lower than the raw MS for crude oil absorption.The raw MS retained 53% of its initial absorption capacity after 20 cycles of absorption,while rGO/TiO_(2)/PDMS/MS retained 97%,suggesting good recyclability.Excellent oil and organic solvent recovery(90%-96%)was demonstrated by rGO/TiO_(2)/PDMS/MS in oil-water combinations.In a continuous separation system,it achieved a remarkable separation efficiency of 2.4×10^(6)L/(m^(3)·h),and in turbulent emulsion separation,it achieved a demulsification efficiency of 90%-91%.This study provides a practical substitute for massive oil spill cleaning.

Reduced graphene oxide aerogel decorated with Mo_(2)C nanoparticles toward multifunctional properties of hydrophobicity,thermal insulation and microwave absorption

Reduced graphene oxide(rGO)aerogels are emerging as very attractive scaffolds for high-performance electromagnetic wave absorption materials(EWAMs)due to their intrinsic conductive networks and intricate interior microstructure,as well as good compatibility with other electromagnetic(EM)components.Herein,we realized the decoration of rGO aerogel with Mo_(2)C nanoparticles by sequential hydrothermal assembly,freeze-drying,and high-temperature pyrolysis.Results show that Mo_(2)C nanoparticle loading can be easily controlled by the ammonium molybdate to glucose molar ratio.The hydrophobicity and thermal insulation of the rGO aerogel are effectively improved upon the introduction of Mo_(2)C nanoparticles,and more importantly,these nanoparticles regulate the EM properties of the rGO aerogel to a large extent.Although more Mo_(2)C nanoparticles may decrease the overall attenuation ability of the rGO aerogel,they bring much better impedance matching.At a molar ratio of 1:1,a desirable balance between attenuation ability and impedance matching is observed.In this context,the Mo_(2)C/r GO aerogel displays strong reflection loss and broad response bandwidth,even with a small applied thickness(1.7 mm)and low filler loading(9.0wt%).The positive effects of Mo_(2)C nanoparticles on multifunctional properties may render Mo_(2)C/r GO aerogels promising candidates for high-performance EWAMs under harsh conditions.

Engineering CoMoO_(4) in reduced graphene oxide as superior cathode hosts for advanced room-temperature sodium-sulfur batteries

Promising room-temperature sodium-sulfur(RT Na-S)battery systems rely on purposely designed highperforming and low-cost electrode materials.Nevertheless,there are the challenges of irreversible dissolution and slow redox kinetics of NaPSs in the complete discharge of sulfur capacity.Herein,engineered CoMoO_(4)in reduced graphene oxide(CoMoO_(4)@rGO)is reported as a class of superior cathode hosts for RT Na-S batteries.The CoMoO_(4)@rGO matrix is designed to facilitate the reversible sodiation and desodiation of sulfur,considering the strong chemisorption between sulfur(and short-chain sodium sulfides)and CoMoO_(4),which alleviates the shuttle effect of sodium sulfides and accelerates the electrochemical reaction rate at RT.The obtained S/CoMoO_(4)@rGO cathode with~52%S loading exhibits a high capacity of520.1 mA h g^(-1)after 100 cycles at 0.1 A g^(-1).Moreover,an enhanced long-term performance at high current densities(212.2 mA h g^(-1)at 4 A g^(-1)over 1000 cycles)with high Coulombic efficiency(~100%)is also achieved.This work demonstrates a novel multifunctional additive for RT Na-S battery cathodes,which is expected to promote the long-waited development towards practical applications of RT Na-S batteries.

Green synthesis of three-dimensional magnesium ferrite/titanium dioxide/reduced graphene from Garcinia mangostana extract for crystal violet photodegradation and antibacterial activity

In this study,three-dimensional porous magnesium ferrite/titanium dioxide/reduced graphene oxide(Mg Fe_2O_(4)-GM/TiO_(2)/rGO(MGTG))was successfully synthesized via green and hydrothermal-supported co-precipitation methods using the extract of Garcinia mangostana(G.mangostana)as a reducing agent.The characterization results indicate the successful formation of the nano/micro Mg Fe_(2)O_(4)(MFO)and TiO_(2) on the structure of the reduced graphene oxide(rGO),which can also act as efficient support,alleviating the agglomeration of the nano/micro MFO and TiO_(2).The synergic effects of the adsorption and photodegradation activity of the material were investigated according to the removal of crystal violet(CV)under ultraviolet light.The effects of catalyst dosage,CV concentration,and p H on the CV removal efficiency of the MGTG were also investigated.According to the results,the CV photodegradation of the MGTG-200 corresponded to the pseudo-first-order kinetic model.The reusability of the material after 10 cycles also showed a removal efficiency of 92%.This happened because the materials can easily be recollected using external magnets.In addition,according to the effects of different free radicals·O_(2)^(-),h^(+),and·OH on the photodegradation process,the photocatalysis mechanism of the MGTG was also thoroughly suggested.The antibacterial efficiency of the MGTG was also evaluated according to the inhibition of the Gram-positive bacteria strain Staphylococcus aureus(S.aureus).Concurrently,the antibacterial mechanism of the fabricated material was also proposed.These results confirm that the prepared material can be potentially employed in a wide range of applications,including wastewater treatment and antibacterial activity.

Manufacturing N,O-carboxymethyl chitosan-reduced graphene oxide under freeze-dying for performance improvement of Li-S battery

Lithium-sulfur(Li-S) batteries can provide far higher energy density than currently commercialized lithium ion batteries, but challenges remain before it they are used in practice.One of the challenges is the shuttle effect that originates from soluble intermediates, like lithium polysulfides. To address this issue, we report a novel laminar composite, N,O-carboxymethyl chitosan-reduced graphene oxide(CC-rGO), which is manufactured via the self-assembly of CC onto GO and subsequent reduction of GO under an extreme condition of 1 Pa and-50°C. The synthesized laminar CC-rGO composite is mixed with acetylene black(AB) and coated on a commercial polypropylene(PP) membrane, resulting in a separator(CC-rGO/AB/PP) that can not only completely suppress the polysulfides penetration, but also can accelerate the lithium ion transportation, providing a Li-S battery with excellent cyclic stability and rate capability. As confirmed by theoretic simulations, this unique feature of CC-rGO is attributed to its strong repulsive interaction to polysulfide anions and its benefit for fast lithium ion transportation through the paths paved by the heteroatoms in CC.

Mechanically flexible reduced graphene oxide/carbon composite films for high-performance quasi-solid-state lithium-ion capacitors

Practical applications of diverse flexible wearable electronics require electrochemical energy storage(EES)devices with multiple configurations.Moreover,to fabricate flexible EES devices with high energy density and stability,organic integration from electrode design to device assembly is required.To address these challenges,a free-standing reduced graphene oxide(rGO)/carbon film with a unique sandwich structure has been designed via the assistance of vacuum-assistant filtration for lithium-ion capacitors(LICs).The graphene acts as not only a binder to construct a three-dimensional conductive network but also an active material to provide additional capacitive lithium storage sites,thus enabling fast ion/electron transport and improving the capacity.The designed rGO/hard carbon(rGO/HC)and rGO/activated carbon(rGO/AC)free-standing films exhibit enhanced specific capacities(513.7 mA h g^(-1)for rGO/HC and 102.8 mA h g^(-1)for rGO/AC)and excellent stability.Moreover,the integrated flexible quasi-solid-state rGO/AC//rGO/HC LIC devices possess a maximum energy density of 138.3 Wh kg^(-1),a high power density of 11 kW kg^(-1),and improved cycling performance(84.4%capacitance maintained after 10,000 cycles),superior to the AC//HC LIC(43.5%retention).Such a strategy enlightens the development of portable flexible LICs.

Reduced graphene oxide-embedded nerve conduits loaded with bone marrow mesenchymal stem cell-derived extracellular vesicles promote peripheral nerve regeneration

We previously combined reduced graphene oxide(rGO)with gelatin-methacryloyl(GelMA)and polycaprolactone(PCL)to create an rGO-GelMA-PCL nerve conduit and found that the conductivity and biocompatibility were improved.However,the rGO-GelMA-PCL nerve conduits differed greatly from autologous nerve transplants in their ability to promote the regeneration of injured peripheral nerves and axonal sprouting.Extracellular vesicles derived from bone marrow mesenchymal stem cells(BMSCs)can be loaded into rGO-GelMA-PCL nerve conduits for repair of rat sciatic nerve injury because they can promote angiogenesis at the injured site.In this study,12 weeks after surgery,sciatic nerve function was measured by electrophysiology and sciatic nerve function index,and myelin sheath and axon regeneration were observed by electron microscopy,immunohistochemistry,and immunofluorescence.The regeneration of microvessel was observed by immunofluorescence.Our results showed that rGO-GelMA-PCL nerve conduits loaded with BMSC-derived extracellular vesicles were superior to rGO-GelMA-PCL conduits alone in their ability to increase the number of newly formed vessels and axonal sprouts at the injury site as well as the recovery of neurological function.These findings indicate that rGO-GelMA-PCL nerve conduits loaded with BMSC-derived extracellular vesicles can promote peripheral nerve regeneration and neurological function recovery,and provide a new direction for the curation of peripheral nerve defect in the clinic.

Synthesis of Graphene Oxide (GO) by Modified Hummers Method and Its Thermal Reduction to Obtain Reduced Graphene Oxide (rGO)

Over the span of years, improvements over various synthesis methods of graphene are constantly pursued to provide safer and more effective alternatives. Though the extraction of graphene through Hummers method is one of the oldest techniques yet it is one of the most suitable methods for the formation of bulk graphene. Graphene can be obtained in the form of reduced Graphite oxide, sometimes also referred as Graphene oxide. The effectiveness of this oxidation process can be evaluated by the magnitude of carbon/oxygen ratio of the obtained graphene. Here, graphene oxide (GO) was prepared by oxidizing the purified natural flake graphite (NFG) by a modified Hummers method. The attempts have been made to synthesize GO having few layers by using a modified Hummers method where the amount of NaNO3 has been decreased, and the amount of KMnO4 is increased. The reaction has been performed in a 9:1 (by volume) mixture of H2SO4/H3PO4. This modification is successful in increasing the reaction yield and reducing the toxic gas evolution while using a varied proportion of KMnO4 and H2SO4 as those required by Hummers method. A new component of K2S2O8 has been introduced to the reaction system to maintain the pH value. Reduced graphene oxide (rGO) was thereafter extracted by thermal modification of GO. Here, GO has been used as a precursor for graphene synthesis by thermal reduction processes. The results of FTIR and Raman spectroscopy analysis show that the NFG when oxidized by strong oxidants like KMnO4 and NaNO3, introduced oxygen atoms into the graphite layers and formed bonds like C=O, C-H, COOH and C-O-C with the carbon atoms in the graphite layers. The structure and morphology of both GO and rGO were analyzed using X-ray diffraction (XRD), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HR-TEM), Fourier transform infrared spectroscopy (FTIR), ultraviolet-visible spectroscopy, Raman spectroscopy, Brunauer-Emmett-Teller (BET) surface area analysis and differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA).

Ag/reduced graphene oxide(RGO) nanocomposites for detection of TNT

The modified Hummers method was employed to generate graphene oxide,and Ag /reduced graphene oxide (RGO) nanocomposites were synthesized at different temperatures by using sodium citrate as the reductant. Scanning electron microscopy (SEM),transmission electron microscopy (TEM),X-ray diffraction (XRD),X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy were employed to characterize the reaction products. The results indicate that RGO has been synthesized successfully,and Ag particles are distributed evenly on the surface of RGO.The RGO prepared at a reaction temperature of 120℃ shows the best surface-enhanced Raman scattering (SERS) activity.The Ag /RGO nanocomposites modified by 10^- 5 mol /L 4-aminothiophenol (PATP) successfully detect a 10^- 5 mol /L 2,4,6-trinitrotoluene (TNT) alcohol solution.

Reduced graphene oxide (RGO) reinforced Mg biocomposites for use as orthopedic applications: Mechanical properties, cytocompatibility and antibacterial activity

Magnesium(Mg) has attracted wide interest in orthopedic applications as they exhibit great biodegradability and strong biocompatibility,while corrosion is the main concern for Mg that should be addressed prior to biomedical applications. In this work, ZM31(Mg-3Zn-1Mn)/x RGO(x = 0, 0.5, 1 and 1.5 wt%) biocomposites were synthesized by semi-powder metallurgy method. The results showed that the RGO acting as an effective reinforcing filler to prevent deformation and showed better compressive strength(282.3 ± 9 MPa) and revealed enhancement in failure Strain(7.8 ± 2.1%) at 1 wt% RGO concentration compared to Mg alloy(244.5 ± 9 MPa and 7.1 ± 1.5%respectively). Moreover, fracture analysis indicated a more ductile fracture of the nanocomposites after the incorporation of RGO. Crack bridging, crack deflection and crack branching are dominant mechanisms for reinforcement of Mg-based containing RGO. Mg composites containing 0.5 wt% RGO showed a low corrosion rate(2.75 mm/year), while more incorporation of RGO resulted in an increased corrosion rate(4.38 mm/year). In addition, the degradation rate of ZM31 alloy(2.57 mg·cm-2·d-1) obviously decreased with the addition of 0.5 wt%RGO(1.84 mg·cm-2·d-1) in the SBF. Besides, continuous apatite layers were created on the composites in the SBF solution. Also, the cell culture examinations showed good cell viability and adhesion on composites with 0.5 and 1 wt% RGO, which was demonstrated by the SEM and MTT assay The alkaline phosphatase(ALP) activity of the ZM3–0.5RGO composite was considerably higher than that of ZM31matrix alloy in 24 h and 48 h, implying higher osteoblastic differentiation. The antibacterial behavior toward both bacteria(E. coli and S.aureus) exhibited that escalating RGO concentration in Mg-matrix composites leads to further inhibition of bacteria growth. These findings suggested that ZM31–0.5RGO biocomposite could be a more promising candidate for orthopedic implants.

Synthesis, properties, and applications of graphene oxide/reduced graphene oxide and their nanocomposites

Thanks to their remarkable mechanical, electrical, thermal, and barrier properties, graphene-based nanocomposites have been a hot area of research in the past decade. Because of their simple top-down synthesis, graphene oxide (GO) and reduced graphene oxide (rGO) have opened new possibilities for gas barrier, membrane separation, and stimuli-response characteristics in nanocomposites. Herein, we review the synthesis techniques most commonly used to produce these graphene derivatives, discuss how synthesis affects their key material properties, and highlight some examples of nanocomposites with unique and impressive properties. We specifically highlight their performances in separation applications, stimuli-responsive materials, anti-corrosion coatings, and energy storage. Finally, we discuss the outlook and remaining challenges in the field of practical industrial-scale production and use of graphene-derivative-based polymer nanocomposites.

Toxicity of Multi-Walled Carbon Nanotubes,Graphene Oxide,and Reduced Graphene Oxide to Zebrafish Embryos

Objective This study was aimed to investigate the toxic effects of 3 nanomaterials, i.e. multi-walled carbon nanotubes （MWCNTs）, graphene oxide （GO）, and reduced graphene oxide （RGO）, on zebrafish embryos. Methods The 2-h post-fertilization （hpf） zebrafish embryos were exposed to MWCNTs, GO, and RGO at different concentrations （1, 5, 10, 50, 100 mg/L） for 96 h. Afterwards, the effects of the 3 nanomateria on spontaneous movement, heart rate, hatching rate, length of larvae, mortality, and malformations Is were evaluated. Results Statistical analysis indicated that RGO significantly inhibited the hatching of zebrafish embryos. Furthermore, RGO and MWCNTs decreased the length of the hatched larvae at 96 hpf. No obvious morphological malformation or mortality was observed in the zebrafish embryos after exposure to the three nanomaterials. Conclusion MWCNTs, GO, and RGO were all toxic to zebrafish embryos to influence embryos hatching and larvae length. Although no obvious morphological malformation and mortality were observed in exposed zebrafish embryos, further studies on the toxicity of the three nanomaterials are still needed.

Enhanced cycle performance of Li/S battery with the reduced graphene oxide/activated carbon functional interlayer

The high-energy lithium/sulfur(Li/S) battery has become a very popular topic of research in recent years due to its high theoretical capacity of 1672 m Ah/g. However, the polysulfide shuttle effect remains of great concern with a great number of publications dedicated to its mitigation. In this contribution, a three-dimensional(3D) reduced graphene oxide/activated carbon(RGO/AC) film, synthesized by a simple hydrothermal method and convenient mechanical pressing, is sandwiched between the separator and the sulfur-based cathode, acting as a functional interlayer to capture and trap polysulfide species. Consequently, the Li/S cell with this interlayer shows an impressive initial discharge capacity of 1078 m Ah/g and a reversible capacity of 655 m Ah/g even after 100 cycles. The RGO/AC interlayer impedes the movement of polysulfide while providing unimpeded channels for lithium ion mass transfer. Therefore, the RGO/AC interlayer with a well-designed structure represents strong potential for high-performance Li/S batteries.

Lightweight,Flexible Cellulose-Derived Carbon Aerogel@Reduced Graphene Oxide/PDMS Composites with Outstanding EMI Shielding Performances and Excellent Thermal Conductivities

In order to ensure the operational reliability and infor-mation security of sophisticated electronic components and to protect human health,efficient electromagnetic interference(EMI)shielding materials are required to attenuate electromagnetic wave energy.In this work,the cellulose solution is obtained by dissolving cotton through hydrogen bond driving self-assembly using sodium hydroxide(NaOH)/urea solution,and cellulose aerogels(CA)are prepared by gelation and freeze-drying.Then,the cellulose carbon aerogel@reduced graphene oxide aerogels(CCA@rGO)are prepared by vacuum impregnation,freeze-drying followed by thermal annealing,and finally,the CCA@rGO/polydimethylsiloxane(PDMS)EMI shielding composites are prepared by backfilling with PDMS.Owing to skin-core structure of CCA@rGO,the complete three-dimensional(3D)double-layer con-ductive network can be successfully constructed.When the loading of CCA@rGO is 3.05 wt%,CCA@rGO/PDMS EMI shielding composites have an excellent EMI shielding effectiveness(EMI SE)of 51 dB,which is 3.9 times higher than that of the co-blended CCA/rGO/PDMS EMI shielding composites(13 dB)with the same loading of fillers.At this time,the CCA@rGO/PDMS EMI shielding composites have excellent thermal stability(T_(HRI) of 178.3℃)and good thermal conductivity coefficient(λ of 0.65 W m^(-1) K^(-1)).Excellent comprehensive performance makes CCA@rGO/PDMS EMI shielding composites great prospect for applications in lightweight,flexible EMI shielding composites.

Reduced Graphene Oxide-Wrapped FeS_2 Composite as Anode for High-Performance Sodium-Ion Batteries

Iron disulfide is considered to be a potential anode material for sodium-ion batteries due to its high theoretical capacity. However, its applications are seriously limited by the weak conductivity and large volume change, which results in low reversible capacity and poor cycling stability.Herein, reduced graphene oxide-wrapped FeS_2(FeS_2/rGO)composite was fabricated to achieve excellent electrochemical performance via a facile two-step method. The introduction of rGO effectively improved the conductivity,BET surface area, and structural stability of the FeS_2 active material, thus endowing it with high specific capacity, good rate capability, as well as excellent cycling stability. Electrochemical measurements show that the FeS_2/rGO composite had a high initial discharge capacity of 1263.2 mAh gg^(-1) at 100 mA gg^(-1) and a high discharge capacity of 344 mAh gg^(-1) at 10 A gg^(-1), demonstrating superior rate performance. After 100 cycles at 100 mA gg^(-1),the discharge capacity remained at 609.5 mAh g^(-1), indicating the excellent cycling stability of the FeS_2/rGO electrode.

Structural and optical properties of thermally reduced graphene oxide for energy devices

Natural intercalation of the graphite oxide, obtained as a product of Hummer＇s method, via ultra-sonication of water dispersed graphite oxide has been carried out to obtain graphene oxide（GO） and thermally reduced graphene oxide（RGO）.Here we report the effect of metallic nitrate on the oxidation properties of graphite and then formation of metallic oxide（MO） composites with GO and RGO for the first time. We observed a change in the efficiency of the oxidation process as we replaced the conventionally used sodium nitrate with that of nickel nitrate Ni（NO_3）_2, cadmium nitrate Cd（NO_3）_2,and zinc nitrate Zn（NO_3）_2. The structural properties were investigated by x-ray diffraction and observed the successful formation of composite of MO–GO and MO–RGO（M = Zn, Cd, Ni）. We sought to study the effect on the oxidation process through optical characterization via UV-Vis spectroscopy and Fourier Transform Infrared（FTIR） spectroscopy.Moreover, Thermo Gravimetric Analysis（TGA） was carried out to confirm 〉 90% weight loss in each process thus proving the reliability of the oxidation cycles. We have found that the nature of the oxidation process of graphite powder and its optical and electrochemical characteristics can be tuned by replacing the sodium nitrate（NaNO_3） by other metallic nitrates as Cd（NO_3）_2, Ni（NO_3）_2, and Zn（NO_3）_2. On the basis of obtained results, the synthesized GO and RGO may be expected as a promising material in antibacterial activity and in electrodes fabrication for energy devices such as solar cell, fuel cell,and super capacitors.

Reduced graphene oxide supported Pd-Cu-Co trimetallic catalyst:synthesis,characterization and methanol electrooxidation properties

Trimetallic palladium-copper-cobalt nanoparticles supported on reduced graphene oxide(PdCuCo/RGO)with different molar ratios of Pd,Cu and Co can be synthesized by facile chemical reduction with NaBH_4 as reductant and cetrimonium bromide as stabilizer.The morphology,structure and composition of the as-synthesized catalysts are characterized by transmission electron microscopy,X-ray diffraction and Xray photoelectron spectroscopy.The cyclic voltammetry and chronoamperometry are utilized to investigate the electrochemical activities and stabilities of the as-obtained catalysts.The results demonstrate that the PdCuCo/RGO catalyst shows superior catalytic activity and stability for methanol electrooxidation in alkaline media compared with PdCu/RGO,PdCo/RGO,and Pd/RGO catalysts.These findings suggest that the PdCuCo/RGO catalyst possesses a great potential as a promising anode catalyst for direct methanol fuel cells.

High-Performance Photo-Modulated Thin-Film Transistor Based on Quantum dots/Reduced Graphene Oxide Fragment-Decorated ZnO Nanowires

In this paper, a photo-modulated transistor based on the thin-film transistor structure was fabricated on the flexible substrate by spin-coating and magnetron sputtering. A novel hybrid material that composed of Cd Se quantum dots and reduced graphene oxide(RGO) fragment-decorated ZnO nanowires was synthesized to overcome the narrow optical sensitive waveband and enhance the photo-responsivity. Due to the enrichment of the interface and heterostructure by RGO fragments being utilized, the photo-responsivity of the transistor was improved to 2000 AW^(-1) and the photo-sensitive wavelength was extended from ultraviolet to visible. In addition, a positive back-gate voltage was employed to reduce the Schottky barrier width of RGO fragments and ZnO nanowires. As a result, the amount of carriers was increased by 10 folds via the modulation of back-gate voltage. With these inherent properties, such as integrated circuit capability and wide optical sensitive waveband, the transistor will manifest great potential in the future applications in photodetectors.

Metal porphyrin intercalated reduced graphene oxide nanocomposite utilized for electrocatalytic oxygen reduction

In this paper, we report a simple and facile self-assembly method to successfully fabricate cationic metal porphyrin-MtTMPyP(Mt= Cobalt(Ⅱ), Manganese(Ⅲ), or Iron(Ⅲ); TMPyP = 5, 10, 15, 20-tetrakis(N-methylpyridinium-4-yl) porphyrin) intercalated into the layer of graphene oxide(GO) by the cooperative effects of electrostatic and π-π stacking interaction between positively charged metal porphyrin and negatively charged GO sheets. Followed by reduction with hydrazine vapor, a series of novel 2 D MtTMPyP/rGO_n were fabricated. The as-prepared 2 D hybrids were fully characterized and tested as non-noble metal catalysts for oxygen reduction reaction(ORR) in an alkaline medium. The MtTMPyP/rGO_n hybrids, especially CoTMPyP/rGO_5, demonstrated an improved electrocatalytic activity for ORR and a number of exchanged electrons close to 4-electron reaction, increased stability and excellent tolerance to methanol, showing a potential alternative catalyst for ORR in fuel cells and air batteries.

Reduced graphene oxide-grafted bovine serum albumin/bredigite nanocomposites with high mechanical properties and excellent osteogenic bioactivity for bone tissue engineering

The optimization of the scaffolds to provide a suitable matrix and accelerate the regeneration process is vital for bone tissue engineering.However,poor mechanical and biological characteristics remain the primary challenges that must be addressed.For example,although bredigite(Br)has shown great potential for application in bone tissue engineering,it easily fails in replacement.In the present work,these challenges are addressed by reinforcing the Br matrix with nanosheets of graphene oxide(rGO)that have been reduced by bovine serum albumin(BSA)in order to enhance the mechanical properties and biological behavior.The reduction of graphene oxide by BSA improves the water stability of the nanosheets and provides an electrostatic interaction between theBSA-rGO nanosheets and theBr particles.The high thermal conductivity of theBSA-rGO nanosheets decreases the porosity of the Br by transferring heat to the core of the tablet.Furthermore,the addition of BSA-rGO nanosheets into the Br matrix enhances the adhesion of G-292 cells on the surface of the tablets.These findings suggest that the tablet consisting of BSA-rGO-reinforced Br has encouraging potential for application in bone tissue engineering.