Metallic flaky sendust particles are prepared for use as fillers in electromagnetic attenuation composites. We report the interface reflection model to divide the broad bandwidth into electromagnetic loss and quarter-...Metallic flaky sendust particles are prepared for use as fillers in electromagnetic attenuation composites. We report the interface reflection model to divide the broad bandwidth into electromagnetic loss and quarter-wavelength （λ/4） cancelation. Combining with the face reflection calculation, we identify the electromagnetic loss originated from skin effect, which is used to explain over half of the absorbed energy in high frequency band. Most impor- tantly, the unique electromagnetic loss cannot generate the reflection loss （RL） peak. Using the phase relation of face reflection, we show evidence that the λ/4 cancelation is vital to generate the RL peak. The calculated energy loss agrees well with the experimental data and lays the foundation for further research.展开更多
This paper deals with reflection spectra and polarized reflection spectra of 20 sorts of rock in 2π space, and then creates a model of reflection spectra of rock surface in 2π space. We measured the change of reflec...This paper deals with reflection spectra and polarized reflection spectra of 20 sorts of rock in 2π space, and then creates a model of reflection spectra of rock surface in 2π space. We measured the change of reflection and polarized reflection spectra as altering the incidence angle, vertex angle, azimuth angle, band and polarization. The results show that influence of the incidence angle on spectral curves is very strong. And when the vertex angle is constant, the horizontal azimuth polarizes rock spectra, and distorts the circular spectrum to become elliptic. The polarization influences the reflection intensity of rock spectra, but has no evident influence on the characteristics of wave forms of rock in 2π space. Therefore, we can describe the whole reflection spectral characteristics, including polarization, of rock surface in 2π space by measuring and calculating the e and p values in several key directions.展开更多
We present a bidirectional reflection distribution function （BRDF） model for thermal coating surfaces based on a three-component reflection assumption, in which the specular reflection is given according to the micr...We present a bidirectional reflection distribution function （BRDF） model for thermal coating surfaces based on a three-component reflection assumption, in which the specular reflection is given according to the microfacet theory and Snell＇s law, the multiple reflection is considered Nth cosine distributed, and the volume scattering is uniformly distributed in reflection angles according to the experimental results. This model describes the reflection characteristics of thermal coating surfaces more completely and reasonably. Simulation and measurement results of two thermal coating samples SR107 and S781 are given to validate that this three-component model significantly improves the modeling accuracy for thermal coating surfaces compared with the existing BRDF models.展开更多
For designing camouflage of ground metal target against millimeter wave(MMW) passive detections,based on the radiation and reflection theories related to MMW passive detection and an assumption of high frequency appro...For designing camouflage of ground metal target against millimeter wave(MMW) passive detections,based on the radiation and reflection theories related to MMW passive detection and an assumption of high frequency approximation,simplified models of two kinds of ground metal targets are established.Analysis indicates that the reflection from ground is the leading factor on a ground metal target's radiant temperature.In an 8-mm imaging experiment,the uneven distribution of radiant temperatures in horizontal and vertical metal plates is directly perceived.In a radiometer experiment,two positions of a radiometer device are utilized to obtain the radiant temperatures of a horizontal metal in two different grounds(made of asphalt and metal net respectively),which are 295.41 K and 301.55 K,respectively.The experimental results are close to the analytical results calculated from the proposed simplified models,which are 306 K and 296 K,respectively.According to the simplified models,different parts of a vertical plate receive incident MMW of different angles from the asphalt background.The radiant temperature of a vertical metal plate obtained from a radiometer experiment at night is 307 K,and it is in coherent with 304.22 K,the result from calculation using the simplified model of vertical plate.Both the analytic results and the experimental results agree with the uneven distribution of radiant temperature.展开更多
Seismic wave modeling is a cornerstone of geophysical data acquisition, processing, and interpretation, for which finite-difference methods are often applied. In this paper, we extend the velocity- pressure formulatio...Seismic wave modeling is a cornerstone of geophysical data acquisition, processing, and interpretation, for which finite-difference methods are often applied. In this paper, we extend the velocity- pressure formulation of the acoustic wave equation to marine seismic modeling using the staggered-grid finite-difference method. The scheme is developed using a fourth-order spatial and a second-order temporal operator. Then, we define a stability coefficient (SC) and calculate its maximum value under the stability condition. Based on the dispersion relationship, we conduct a detailed dispersion analysis for submarine sediments in terms of the phase and group velocity over a range of angles, stability coefficients, and orders. We also compare the numerical solution with the exact solution for a P-wave line source in a homogeneous submarine model. Additionally, the numerical results determined by a Marmousi2 model with a rugged seafloor indicate that this method is sufficient for modeling complex submarine structures.展开更多
Even since 1985 when the Patent Law was launched in China, the utility model patent has been playing a very important role. Over the two decades, the utility model system has played an active part in encouraging inven...Even since 1985 when the Patent Law was launched in China, the utility model patent has been playing a very important role. Over the two decades, the utility model system has played an active part in encouraging invention-creations, and promoting the progress and development of science and technology.展开更多
基金Supported by the Fundamental Research Fund for the Central Universities under Grant No LZUJBKY-2015-121the National Natural Science Foundations of China under Grant Nos 11574122 and 51102124the National Science Foundation for Fostering Talents in Basic Research of the National Natural Science Foundation of China
文摘Metallic flaky sendust particles are prepared for use as fillers in electromagnetic attenuation composites. We report the interface reflection model to divide the broad bandwidth into electromagnetic loss and quarter-wavelength （λ/4） cancelation. Combining with the face reflection calculation, we identify the electromagnetic loss originated from skin effect, which is used to explain over half of the absorbed energy in high frequency band. Most impor- tantly, the unique electromagnetic loss cannot generate the reflection loss （RL） peak. Using the phase relation of face reflection, we show evidence that the λ/4 cancelation is vital to generate the RL peak. The calculated energy loss agrees well with the experimental data and lays the foundation for further research.
文摘This paper deals with reflection spectra and polarized reflection spectra of 20 sorts of rock in 2π space, and then creates a model of reflection spectra of rock surface in 2π space. We measured the change of reflection and polarized reflection spectra as altering the incidence angle, vertex angle, azimuth angle, band and polarization. The results show that influence of the incidence angle on spectral curves is very strong. And when the vertex angle is constant, the horizontal azimuth polarizes rock spectra, and distorts the circular spectrum to become elliptic. The polarization influences the reflection intensity of rock spectra, but has no evident influence on the characteristics of wave forms of rock in 2π space. Therefore, we can describe the whole reflection spectral characteristics, including polarization, of rock surface in 2π space by measuring and calculating the e and p values in several key directions.
文摘We present a bidirectional reflection distribution function （BRDF） model for thermal coating surfaces based on a three-component reflection assumption, in which the specular reflection is given according to the microfacet theory and Snell＇s law, the multiple reflection is considered Nth cosine distributed, and the volume scattering is uniformly distributed in reflection angles according to the experimental results. This model describes the reflection characteristics of thermal coating surfaces more completely and reasonably. Simulation and measurement results of two thermal coating samples SR107 and S781 are given to validate that this three-component model significantly improves the modeling accuracy for thermal coating surfaces compared with the existing BRDF models.
基金supported by Jiangsu Key laboratory of Spectral Imaging&Intelligent Sense(Nanjing University of Science and Technology)(30920130122XXX)
文摘For designing camouflage of ground metal target against millimeter wave(MMW) passive detections,based on the radiation and reflection theories related to MMW passive detection and an assumption of high frequency approximation,simplified models of two kinds of ground metal targets are established.Analysis indicates that the reflection from ground is the leading factor on a ground metal target's radiant temperature.In an 8-mm imaging experiment,the uneven distribution of radiant temperatures in horizontal and vertical metal plates is directly perceived.In a radiometer experiment,two positions of a radiometer device are utilized to obtain the radiant temperatures of a horizontal metal in two different grounds(made of asphalt and metal net respectively),which are 295.41 K and 301.55 K,respectively.The experimental results are close to the analytical results calculated from the proposed simplified models,which are 306 K and 296 K,respectively.According to the simplified models,different parts of a vertical plate receive incident MMW of different angles from the asphalt background.The radiant temperature of a vertical metal plate obtained from a radiometer experiment at night is 307 K,and it is in coherent with 304.22 K,the result from calculation using the simplified model of vertical plate.Both the analytic results and the experimental results agree with the uneven distribution of radiant temperature.
基金Supported by the National Natural Science Foundation of China(Nos. 41206043, 40930845)the Open Foundation of Key Laboratory of Marine Geology and Environment of Chinese Academy of Sciences(No. MGE2011KG07)+1 种基金the Knowledge Innovation Program of Chinese Academy of Sciences (No. KZCX2-YW-229)the National Basic Research Program of China (973 Program) (No. 2009CB219505)
文摘Seismic wave modeling is a cornerstone of geophysical data acquisition, processing, and interpretation, for which finite-difference methods are often applied. In this paper, we extend the velocity- pressure formulation of the acoustic wave equation to marine seismic modeling using the staggered-grid finite-difference method. The scheme is developed using a fourth-order spatial and a second-order temporal operator. Then, we define a stability coefficient (SC) and calculate its maximum value under the stability condition. Based on the dispersion relationship, we conduct a detailed dispersion analysis for submarine sediments in terms of the phase and group velocity over a range of angles, stability coefficients, and orders. We also compare the numerical solution with the exact solution for a P-wave line source in a homogeneous submarine model. Additionally, the numerical results determined by a Marmousi2 model with a rugged seafloor indicate that this method is sufficient for modeling complex submarine structures.
基金The project supported by National Natural Science Foundation of China under Grant No.90403019Science and Technology Foundation of Xi'an Shiyou University under Grant No.2006-43
文摘Even since 1985 when the Patent Law was launched in China, the utility model patent has been playing a very important role. Over the two decades, the utility model system has played an active part in encouraging invention-creations, and promoting the progress and development of science and technology.
