Mechanical Characterization of Rhecktophyllum Camerunense (RC) Fiber Reinforced Concrete

This work presents the development and mechanical characterization of a concrete reinforced with plant fiber extracted from Rhecktophyllum Camerunense (RC), a plant found in the regions of Center and South Cameroon. A comparative study between ordinary concrete and concrete reinforced with RC fiber at different percentages (0.1%, 0.2% and 0.3%) was carried out. The mechanical characterization of the material consisted in studying the flexural, compressive and splitting tensile strength by using cylindrical specimens of dimensions 160 × 320 in accordance with standards EN 12390-3 and EN 12390-6. The study of the mechanical properties was completed by the three-point bending test using prismatic test specimens of dimension 40 × 40 × 160 made according to the EN 196 standard. It emerges from this work that the addition of RC fiber improves the mechanical properties of concrete up to 0.2% with a peak at 0.1% of fiber corresponding to respective increases of 9%, 16% and 6% of the values of mechanical resistance to compression, flexion and tension after 28 days. From 0.3% of fiber, the values of the mechanical characteristics of the composite drop to values lower than those of ordinary concrete. The density reduction rate at 28 days is about 10% compared to the mass of ordinary concrete. These results allow us to conclude that the RC fiber could be valorized for the production of lightweight concrete.

Mechanical Characterization of Rhecktophyllum Camerunense (RC) Fiber Reinforced Concrete

This work presents the development and mechanical characterization of a concrete reinforced with plant fiber extracted from Rhecktophyllum Camerunense (RC), a plant found in the regions of Center and South Cameroon. A comparative study between ordinary concrete and concrete reinforced with RC fiber at different percentages (0.1%, 0.2% and 0.3%) was carried out. The mechanical characterization of the material consisted in studying the flexural, compressive and splitting tensile strength by using cylindrical specimens of dimensions 160 × 320 in accordance with standards EN 12390-3 and EN 12390-6. The study of the mechanical properties was completed by the three-point bending test using prismatic test specimens of dimension 40 × 40 × 160 made according to the EN 196 standard. It emerges from this work that the addition of RC fiber improves the mechanical properties of concrete up to 0.2% with a peak at 0.1% of fiber corresponding to respective increases of 9%, 16% and 6% of the values of mechanical resistance to compression, flexion and tension after 28 days. From 0.3% of fiber, the values of the mechanical characteristics of the composite drop to values lower than those of ordinary concrete. The density reduction rate at 28 days is about 10% compared to the mass of ordinary concrete. These results allow us to conclude that the RC fiber could be valorized for the production of lightweight concrete.

Experimental study on the seismic response of braced reinforced concrete frame with irregular columns

A 15-storey K-braced reinforced concrete model frame with irregular columns, i.e., T-shaped, L-shaped, as well as ＋-shaped columns, was constructed and tested on the six-degree-of-freedom shaking table at the State Key Laboratory for Disaster Reduction in Civil Engineering in Tongji, China. Two types of earthquake records, El-Centro wave （south-north direction） and Shanghai artificial wave （SHAW） with various peak accelerations and principal-secondary sequences, were input and experimentally studied. Based on the shaking table tests and theoretical analysis, several observations can be made. The failure sequence of the model structure is brace→beam→column→joints, so that the design philosophy for several lines of defense has been achieved. Earthquake waves with different spectrums not only influence the magnitude and distribution of the earthquake force and the storey shear force, but also obviously affect the magnitude of the displacement response. The aftershock seismic response of previously damaged reinforced concrete braced frames with irregular columns possesses the equivalent elastic performance characteristic. Generally speaking, from the aspects of failure features and drift ratio, this type of reinforced concrete structure provides adequate earthquake resistance and can be promoted for use in China.

Self-centering seismic retrofit scheme for reinforced concrete frame structures:SDOF system study

This paper presents the results of a parametric study of self-centering seismic retrofit schemes for reinforced concrete (RC) frame buildings. The self-centering retrofit system features flag-shaped hysteresis and minimal residual deformation. For comparison purpose,an alternate seismic retrofit scheme that uses a bilinear-hysteresis retrofit system such as buckling-restrained braces (BRB) is also considered in this paper. The parametric study was carried out in a single-degree-of-freedom (SDOF) system framework since a multi-story building structure may be idealized as an equivalent SDOF system and investigation of the performance of this equivalent SDOF system can provide insight into the seismic response of the multi-story building. A peak-oriented hysteresis model which can consider the strength and stiffness degradation is used to describe the hysteretic behavior of RC structures. The parametric study involves two key parameters -the strength ratio and elastic stiffness ratio between the seismic retrofit system and the original RC frame. An ensemble of 172 earthquake ground motion records scaled to the design basis earthquake in California with a probability of exceedance of 10% in 50 years was constructed for the simulation-based parametric study. The effectiveness of the two seismic retrofit schemes considered in this study is evaluated in terms of peak displacement ratio,peak acceleration ratio,energy dissipation demand ratio and residual displacement ratio between the SDOF systems with and without retrofit. It is found from this parametric study that RC structures retrofitted with the self-centering retrofit scheme (SCRS) can achieve a seismic performance level comparable to the bilinear-hysteresis retrofit scheme (BHRS) in terms of peak displacement and energy dissipation demand ratio while having negligible residual displacement after earthquake.

Evaluation of the fishbone model in simulating the seismic response of multistory reinforced concrete moment-resisting frames

The fishbone model is a simplified numerical model for moment-resisting frames that is capable of modelling the effects of column-beam strength and stiffness ratios. The applicability of the fishbone model in simulating the seismic responses of reinforced concrete moment-resisting frames of different sets of column-beam strength and stiffness ratios are evaluated through nonlinear static, dynamic and incremental dynamic analysis on six prototype buildings of 4-, 8-and 12-stories. The results show that the fishbone model is practically accurate enough for reinforced concrete frames, although the assumption of equal joint rotation does not hold in all cases. In addition to the ground motion characteristics and the number of stories in the structures, the accuracy of the model also varies with the column-beam stiffness and strength ratios. The model performs better for strong column-weak beam frames, in which the lateral drift patterns are better controlled by the continuous stiffness provided by the strong columns. When the inelastic deformation is large, the accuracy of the model may be subjected to large record-to-record variability. This is especially the case for frames of weak columns.

Seismic retrofitting of reinforced concrete frame structures using GFRP-tube-confined-concrete composite braces

This paper presents a new type of structural bracing intended for seismic retrofitting use in framed structures. This special composite brace, termed glass-fiber-reinforced-polymer （GFRP）-tube-confined-concrete composite brace, is comprised of concrete confined by a GFRP tube and an inner steel core for energy dissipation. Together with a contribution from the GFRP-tube confined concrete, the composite brace shows a substantially increased stiffness to control story drift, which is often a preferred feature in seismic retrofitting. An analysis model is established and implemented in a general finite element analysis program - OpenSees, for simulating the load-displacement behavior of the composite brace. Using this model, a parametric study of the hysteretic behavior （energy dissipation, stiffness, ductility and strength） of the composite brace was conducted under static cyclic loading and it was found that the area ratio of steel core to concrete has the greatest influence among all the parameters considered. To demonstrate the application of the composite brace in seismic retrofitting, a three-story nonductile reinforced concrete （RC） frame structure was retrofitted with the composite braces. Pushover analysis and nonlinear time-history analyses of the retrofitted RC frame structure was performed by employing a suite of 20 strong ground motion earthquake records. The analysis results show that the composite braces can effectively reduce the peak seismic responses of the RC frame structure without significantly increasing the base shear demand.

Model Experiment on Integral Seismic Behavior of Reinforced Concrete Frame with Split Columns

Based on a series of previous studies, an experiment on the integral seismic behavior of a 1/3 scaled model of two-bay and three-story reinforced concrete frame with split columns at lower two stories is performed under cyclic loading. The original columns at lower two stories of the model frame are short columns and they are replaced by the split columns. The hysteresis curves between the horizontal cyclic load and the lateral displacement at the top of the model frame, indicate that under the cyclic loading, the model frame undergoes the process of cracking, yielding, and maximum loading before being destroyed at the ultimate load. They also indicate that the model frame has better ductility, and the ratio of the ultimate displacement to the yielding displacement, reaches 6.0. The yielding process of the model frame shows that for the frame with split columns, plastic hinges are generated at the ends of beams and then the columns begin yielding while the frame still possesses the bearing and deformation capacity. The design idea of directly changing the short column to long one in the reinforced concrete frame may be realized by replacing the short column with the split one.

Seismic Analysis for Rigid-Framed Prestressed Reinforced Concrete Bridge in Tianjin Light Railway

The seismic analysis of a rigid-framed prestressed concrete bridge in Tianjin Light Railway is performed. A 3-D dynamic finite element model of the bridge is established considering the weakening effect caused by the soft soil foundation. After the dynamic characteristics are calculated in terms of natural frequencies and modes, the seismic analysis is carried out using the modal response spectrum method and the time-history method, respectively. Based on the calculated results, the reasonable design values are finally suggested as the basis of the seismic design of the bridge, and meanwhile the problems encountered were also analyzed. Finally, some conclusions are drawn as: 1) Despite the superiority of rigid-framed prestressed concrete bridge, the upper and lower ends of the piers of the bridge are proved to be the crucial parts of the bridge, which are easily destroyed under designed earthquake excitations and should be carefully analyzed and designed; 2) The soft soil foundation can possibly result in rather weakening of the lateral rigidity of the rigid-framed bridge, and should be paid considerable attention; 3) The modal response spectrum method, combined with time-history method, is suggested for the seismic analysis in engineering design of the rigid-framed prestressed concrete bridge.

纤维织物增强高延性混凝土加固RC短柱抗剪性能试验研究

为研究纤维织物增强高延性混凝土(TR-HDC)加固钢筋混凝土短柱的抗剪性能,设计了6根钢筋混凝土柱,包括2个对比柱和4个TR-HDC加固柱.通过低周反复荷载试验,对比分析剪跨比、纤维织物层数对试件破坏形态、变形、承载力和耗能能力的影响.结果表明:采用TR-HDC加固钢筋混凝土短柱,可显著提高其抗剪承载力;TR-HDC与原混凝土柱协同工作性能良好,加固后的混凝土柱的变形、承载力和耗能能力明显提高;增加纤维织物的层数对钢筋混凝土短柱的抗剪承载力提高幅度较小,但可大幅增强柱的耗能和变形能力;剪跨比较大时,更有利于发挥TR-HDC加固材料的力学性能.基于桁架-拱模型,提出TR-HDC加固钢筋混凝土短柱的抗剪承载力计算方法,计算结果较准确.

附设黏滞阻尼器的RC框架结构抗震韧性评估

为研究黏滞阻尼器对钢筋混凝土(reinforced concrete,RC)框架结构抗震韧性影响,基于增量动力时程分析方法,对附设黏滞阻尼器的RC框架结构开展抗震韧性能力评估。结合FEMA P-58以及我国抗震韧性评价标准,将主要受损构件的修复费用、修复时间曲线以及易损性信息按实际情况进行相应修正,并对无控结构和有控结构的修复费用、修复时间和人员伤亡等主要抗震韧性指标进行对比分析,明确了黏滞阻尼器对RC框架结构抗震韧性的影响。研究表明,在RC框架结构中适当设置黏滞阻尼器不仅能够减小结构地震响应、降低结构破坏概率,还能有效提升结构抗震韧性。

功能可恢复RCS混合框架结构研究进展

钢筋混凝土柱-钢梁(RCS)混合框架结构以其结合了混凝土优异的抗压性能及钢材优异的抗弯性能而受到广泛关注,而可恢复功能结构以其震后快速恢复使用功能的能力,也成为地震工程界研究的新热点。功能可恢复RCS混合框架结构可以在弯矩较大的梁端和柱脚部位设置可更换构件,实现结构的功能可恢复能力。文中简述了近年来功能可恢复RCS混合框架结构研究进展,重点关注各类型功能可恢复钢梁、功能可恢复摇摆柱脚的构造研究,介绍了功能可恢复RCS混合框架结构性能分析研究进展。最后,对功能可恢复RCS混合框架结构仍需深入研究的问题进行了展望。

RC框架梁端负弯矩纵筋部分置于梁侧楼板对性能的影响及构造问题分析

为适应建筑多功能、大跨度、重荷载、高抗震的发展要求,框架梁端部负弯矩纵筋配筋率通常较高,节点区钢筋过于密集,混凝土施工质量不易保证,对结构综合性能有不利影响。先对梁端负弯矩纵筋部分设置于梁侧楼板内(简称APNRFS)的布筋方式进行阐述,然后基于试验结果分析探讨了该配筋方式对结构性能带来的变化及相关构造问题。研究表明:梁端采用APNRFS布筋方式一般不会降低框架梁的承载力;梁端的弯曲变形能力和结构抗震性能有一定提高;移至板内的梁负筋布置宽度宜小于有效翼缘宽度范围;移至板内的梁端负筋宜同时兼作楼板负筋;横向分布筋参与受力,设计中应适当增配。

设有叠合柱的局部错层RC框架结构地震易损性分析

为研究某一设有叠合柱的局部错层钢筋混凝土(reinforced concrete,RC)框架结构在近断层和远场地震作用下的破坏概率,自定义钢管混凝土叠合柱塑性铰参数,并与试验对比验证塑性铰参数的有效性。采用SAP2000建立非线性分析模型,选取近断层和远场地震波共22条,分别以地震峰值加速度(peak ground acceleration,PGA)和最大层间位移角作为地震动强度指标和结构性能指标,基于增量动力分析(incremental dynamic analysis,IDA)结果和点估计函数对错层框架结构进行易损性分析。结果表明:对于远场地震动,结构满足“三水准”抗震设防要求,在罕遇地震下超越防止倒塌极限状态的概率仅为0.24%;结构在近断层多遇地震下仍能满足“小震不坏”的设计要求,设防地震下结构超越修复后使用极限状态的概率为53.63%,发生中等破坏的概率较大,罕遇地震下结构达到倒塌极限状态的概率为5.37%,较远场地震作用破坏更为严重。研究结果可为错层框架结构的设计和地震风险评估提供参考。

型钢组合加固震损RC框架抗震性能试验研究

震损RC框架需在震后得到快速修复,考虑采用加强局部构造及提高整体结构抗震能力的方法,以恢复甚至提高震损框架的抗震能力。结合框架在地震作用下的受力特性及破坏模式,先对柱采取外包角钢与缀条的局部加固,后对整体框架分别采取薄壁钢板剪力墙、斜支撑、V形屈曲约束支撑方式进行加固,并对加固后试件进行低周往复加载试验。结果表明:组合加固后试件抗震性能改善明显,将原框架的“强梁弱柱”转为符合抗震要求的“强节点弱构件,强柱弱梁”破坏。破坏时支撑及薄壁钢板先破坏,能有效避免主体框架过早破坏。试件加固后承载能力、初始刚度、延性及累积耗能均比未加固试件提高显著,且承载力及刚度退化均较缓慢,最后破坏为累积损伤所致。采用V形屈曲约束支撑加固的试件由于其具有多重耗能能力,其抗震性能及延性均好于其他两种组合加固方式的试件,综合考虑试件加固后的抗震性能及破坏模式,建议选用此种方法加固。

6.4级漾濞地震某RC框架及其非结构部件震害分析

2021年云南漾濞6.4级地震造成了较大范围的建筑破坏,在漾濞县城记录到的地震加速峰值(PGA)高达720.2 gal。在强震作用下,大量土木结构的民居发生了破坏,而约束砌体和钢筋混凝土(RC)结构的震害则相对较轻。现场震害调查发现,部分框架结构的震害明显重于同一区域的其他同类型结构,呈现明显、多样的非结构部件破坏特征。因此,该文对某震害较重的框架进行详细调查,分类分析结构及其非结构部件地震破坏细节;依据图纸及现场考察信息建立精细有限元分析模型,对此次地震的地震动破坏力特征以及该框架结构及其非结构部件的地震破坏机理进行了量化分析。分析结果表明:带填充墙框架仿真模型的分析结果与实际震害现象更接近;框架结构局部大空间、框架底部的约束形式和填充墙的布置形式的综合作用导致结构产生局部过大变形与各类非结构部件的严重破坏。在考虑填充墙对框架结构的作用效应后,结构的不规则性大幅增加,导致结构薄弱层的最大层间位移角相较纯框架模型增加127%,并且明显加剧非结构部件的震害。该文对该建筑震害现象的详细调查与仿真分析,可为结构抗震设计与应急救援决策提供参考。

BFRP模壳不排水加固RC墩柱恢复力模型

为研究玄武岩纤维增强聚合物(basalt fiber reinforced polymer, BFRP)模壳不排水加固钢筋混凝土(reinforced concrete, RC)墩柱抗震恢复力模型,在拟静力试验基础上,采用OpenSees有限元软件对模壳加固墩柱进行数值分析,主要研究参数为填充层混凝土强度、模壳厚度、加固高度、轴压比。研究表明:填充层混凝土强度等级越高,墩柱抗震性能有所增强,但C40以上的填充层混凝土强度等级墩柱的抗震性能较为接近;模壳加固厚度较大墩柱的抗震性能优于厚度较小墩柱;当模壳加固高度较高时,墩柱的抗震性能较好,当加固高度大于2~3倍原墩柱塑性铰高度时,抗震性能提升效果趋于稳定;轴压比越大,墩柱的刚度退化较快,不利延性发展。后通过数据回归分析,建立了BFRP模壳加固RC墩柱恢复力模型,对比可知,恢复力模型与试验曲线拟合较好,能有效反映加固墩柱的滞回性能,可为此类结构的抗震性能分析提供参考。

Dynamic responses of reinforced concrete beams under double-endinitiated close-in explosion

The reinforced concrete(RC) structural component might suffer a great damage under close-in explosion.Different from distant explosions, blast loads generated by the close-in explosion are non-uniformly distributed on the structural component and may cause both local and structural failure. In this study,an experimental study was conducted to investigate the dynamic responses of RC beams under doubleend-initiated close-in explosions. The experimental results show that the distribution of blast loads generated by the double-end-initiated explosion is much more non-uniform than those generated by single-point detonation, which is caused by the self-Mach-reflection effects. A 3 D finite element model was developed and validated in LS-DYNA by employing the modified K&C model. Intensive numerical calculations were conducted to study the influences of the initiation way, scaled distance and longitudinal reinforcement ratio on the dynamic responses and failure modes of RC beams. Numerical results show that the RC beam suffers greater damage as the cylindrical explosive is detonated at its double ends than the scenario in which the cylindrical explosive is detonated at its central point. RC beams mainly suffer flexural failure and flexure-shear failure under the double-end close-in explosion, and the failure modes of RC beams change from the flexural damage to flexure-shear damage as the scaled distance or the longitudinal reinforcement ratio decreases. The direct shear failure mode is not usually observed in the double-end-initiated explosion, since the intense blast loads is basically concentrated in the midspan of RC beam, which is due to self-Mach-reflection enhancement.

Experimental study on ductility improvement of reinforced concrete rectangular Columns retrofitted with a new fiber reinforced plastics method

Reinforced concrete （RC） columns lacking adequately detailed transverse reinforcement do not possess the necessary ductility to dissipate seismic energy during a major earthquake without severe strength degradation. In this paper, a new retrofit method, which utilized fiber-reinforced plastics （FRP） confinement mechanism and anchorage of embedded bars, was developed aiming to retrofit non-ductile large RC rectangular columns to prevent the damage of the plastic hinges. Carbon FRP （CFRP） sheets and glass FRP （GFRP） bars were used in this test, and five scaled RC columns were tested to examine the function of this new method for improving the ductility of columns. Responses of columns were examined before and after being retrofitted. Test results indicate that this new composite method can be very effective to improve the anti-seismic behavior of non-ductile RC columns compared with normal CFRP sheets retrofitted column.