Physical separation apparatuses;a vibrating screen, a 4-inch hydrocyclone and a Multi-Gravity Separator (MGS) were used to recover phosphorus as MAP (magnesium ammonium phosphate, MgNH<sub>4</sub>PO<sub...Physical separation apparatuses;a vibrating screen, a 4-inch hydrocyclone and a Multi-Gravity Separator (MGS) were used to recover phosphorus as MAP (magnesium ammonium phosphate, MgNH<sub>4</sub>PO<sub>4.</sub>6H<sub>2</sub>O) from anaerobic digested sludge of two sewage-treatment plants A and B. For plant A, the MAP grade increased from 0.08% to 88.9% with 90.4% recovery and for plant B, the grade increased from 0.11% to 73.8 with 93.2% recovery. The collected MAP products containing impurities such as organic materials and heavy metals were further upgraded through dry and wet magnetic separation tests at different magnetic flux densities. A dry magnetic separator was tested on both MAP products (MAP-A and MAP-B), while the wet magnetic separation process was exclusively experimented for the removal of impurities from MAP-B. Feed samples, as well as magnetic and nonmagnetic products were analyzed by absorption spectroscopy, XRD, ICP-AES, polarizing microscope observation, and SEM-EDX. The grade of MAP products could be improved by about 4% - 9% after magnetic separation (the most appropriate magnetic force being 15,000 Gauss). During both dry and wet magnetic separation processes, not only heavy metals have been removed, but also nonmagnetic constituents like Al, Ba, and Ca. This may be attributed to the attachment of fine magnetic particles on the nonmagnetic surfaces, rendering them magnetic properties.展开更多
A new route to prepare zeolitic material was introduced in this work. Compared with traditional methods, the new route showed lower energy consume. The effect of pre-treatment conditions on structure and crystalline p...A new route to prepare zeolitic material was introduced in this work. Compared with traditional methods, the new route showed lower energy consume. The effect of pre-treatment conditions on structure and crystalline phase was investigated, revealing that the mullite crystalline phase in fly ash could be converted to amorphous phase by alkali at low temperature. The removal performance of heavy metal ions on designed material was also investigated, and we found that the intermediate product showed higher adsorption capacity on Ni^(2+) than zeolite A.展开更多
基金This work was supported by the National Agency of Scientific and Technological Promotion(Grant No.PICT 2016-1611)the Santa Fe Province Agency of Science,Technology and Innovation(Grant No.AC 2015-0005)National University of Rosario(Grant No.BIO517).
文摘Physical separation apparatuses;a vibrating screen, a 4-inch hydrocyclone and a Multi-Gravity Separator (MGS) were used to recover phosphorus as MAP (magnesium ammonium phosphate, MgNH<sub>4</sub>PO<sub>4.</sub>6H<sub>2</sub>O) from anaerobic digested sludge of two sewage-treatment plants A and B. For plant A, the MAP grade increased from 0.08% to 88.9% with 90.4% recovery and for plant B, the grade increased from 0.11% to 73.8 with 93.2% recovery. The collected MAP products containing impurities such as organic materials and heavy metals were further upgraded through dry and wet magnetic separation tests at different magnetic flux densities. A dry magnetic separator was tested on both MAP products (MAP-A and MAP-B), while the wet magnetic separation process was exclusively experimented for the removal of impurities from MAP-B. Feed samples, as well as magnetic and nonmagnetic products were analyzed by absorption spectroscopy, XRD, ICP-AES, polarizing microscope observation, and SEM-EDX. The grade of MAP products could be improved by about 4% - 9% after magnetic separation (the most appropriate magnetic force being 15,000 Gauss). During both dry and wet magnetic separation processes, not only heavy metals have been removed, but also nonmagnetic constituents like Al, Ba, and Ca. This may be attributed to the attachment of fine magnetic particles on the nonmagnetic surfaces, rendering them magnetic properties.
基金supported by the 2016 Key Program of China Guodian Corporation,and the grant number is2015G1PU00200
文摘A new route to prepare zeolitic material was introduced in this work. Compared with traditional methods, the new route showed lower energy consume. The effect of pre-treatment conditions on structure and crystalline phase was investigated, revealing that the mullite crystalline phase in fly ash could be converted to amorphous phase by alkali at low temperature. The removal performance of heavy metal ions on designed material was also investigated, and we found that the intermediate product showed higher adsorption capacity on Ni^(2+) than zeolite A.