Agent-Based Simulation for Interconnection-Scale Renewable Integration and Demand Response Studies

This paper collects and synthesizes the technical requirements, implementation, and validation methods for quasi-steady agent-based simulations of interconnectionscale models with particular attention to the integration of renewable generation and controllable loads. Approaches for modeling aggregated controllable loads are presented and placed in the same control and economic modeling framework as generation resources for interconnection planning studies. Model performance is examined with system parameters that are typical for an interconnection approximately the size of the Western Electricity Coordinating Council(WECC) and a control area about 1/100 the size of the system. These results are used to demonstrate and validate the methods presented.

Enhancing Renewable Energy Integration:A Gaussian-Bare-Bones Levy Cheetah Optimization Approach to Optimal Power Flow in Electrical Networks

In the contemporary era,the global expansion of electrical grids is propelled by various renewable energy sources(RESs).Efficient integration of stochastic RESs and optimal power flow(OPF)management are critical for network optimization.This study introduces an innovative solution,the Gaussian Bare-Bones Levy Cheetah Optimizer(GBBLCO),addressing OPF challenges in power generation systems with stochastic RESs.The primary objective is to minimize the total operating costs of RESs,considering four functions:overall operating costs,voltage deviation management,emissions reduction,voltage stability index(VSI)and power loss mitigation.Additionally,a carbon tax is included in the objective function to reduce carbon emissions.Thorough scrutiny,using modified IEEE 30-bus and IEEE 118-bus systems,validates GBBLCO’s superior performance in achieving optimal solutions.Simulation results demonstrate GBBLCO’s efficacy in six optimization scenarios:total cost with valve point effects,total cost with emission and carbon tax,total cost with prohibited operating zones,active power loss optimization,voltage deviation optimization and enhancing voltage stability index(VSI).GBBLCO outperforms conventional techniques in each scenario,showcasing rapid convergence and superior solution quality.Notably,GBBLCO navigates complexities introduced by valve point effects,adapts to environmental constraints,optimizes costs while considering prohibited operating zones,minimizes active power losses,and optimizes voltage deviation by enhancing the voltage stability index(VSI)effectively.This research significantly contributes to advancing OPF,emphasizing GBBLCO’s improved global search capabilities and ability to address challenges related to local minima.GBBLCO emerges as a versatile and robust optimization tool for diverse challenges in power systems,offering a promising solution for the evolving needs of renewable energy-integrated power grids.

Impact of interconnections and renewable energy integration on the Philippine-Sabah Power Grid systems

This study presents a comprehensive impact analysis of the rotor angle stability of a proposed international connection between the Philippines and Sabah,Malaysia,as part of the Association of Southeast Asian Nations(ASEAN)Power Grid.This study focuses on modeling and evaluating the dynamic performance of the interconnected system,considering the high penetration of renewable sources.Power flow,small signal stability,and transient stability analyses were conducted to assess the ability of the proposed linked power system models to withstand small and large disturbances,utilizing the Power Systems Analysis Toolbox(PSAT)software in MATLAB.All components used in the model are documented in the PSAT library.Currently,there is a lack of publicly available studies regarding the implementation of this specific system.Additionally,the study investigates the behavior of a system with a high penetration of renewable energy sources.Based on the findings,this study concludes that a system is generally stable when interconnection is realized,given its appropriate location and dynamic component parameters.Furthermore,the critical eigenvalues of the system also exhibited improvement as the renewable energy sources were augmented.

Engineering practices for the integration of large-scale renewable energy VSC-HVDC systems

With the continuous development of power electronic devices,intelligent control systems,and other technologies,the voltage level and transmission capacity of voltage source converter (VSC)-high-voltage direct current (HVDC) technology will continue to increase,while the system losses and costs will gradually decrease.Therefore,it can be foreseen that VSC-HVDC transmission technology will be more widely applied in future large-scale renewable energy development projects.Adopting VSC-HVDC transmission technology can be used to overcome issues encountered by large-scale renewable energy transmission and integration projects,such as a weak local power grid,lack of support for synchronous power supply,and insufficient accommodation capacity.However,this solution also faces many technical challenges because of the differences between renewable energy and traditional synchronous power generation systems.Based on actual engineering practices that are used worldwide,this article analyzes the technical challenges encountered by integrating large-scale renewable energy systems that adopt the use of VSC-HVDC technology,while aiming to provide support for future research and engineering projects related to VSC-HVDC-based large-scale renewable energy integration projects.

Impact of industrial virtual power plant on renewable energy integration

An industrial park is one of the typical en ergy con sumption schemes in power systems owing to the heavy in dustrial loads and their abilities to resp ond to electricity price cha nges.Therefore,en ergy in tegrati on in the industrial sector is significant.Accordingly,the concept of industrial virtual power plant(IVPP)has been proposed to deal with such problems.This study demonstrates an IVPP model to man age resources in an eco-i ndustrial park,including en ergy storage systems,dema nd resp onse(DR)resources,and distributed energies.In addition,fuzzy theory is used to cha nge the deterministic system constraints to fuzzy parameters,considering the uncertainty of renewable energy,and fuzzy chance constraints are then set based on the credibility theory.By maximizi ng the daily ben efits of the IVPP owners in day-ahead markets,DR and energy storage systems can be scheduled economically.Therefore,the energy between the grid and IVPP can flow in both directions:the surplus renewable electricity of IVPP can be sold in the market;when the electricity gen erated in side IVPP is not enough for its use,IVPP can also purchase power through the market.Case studies based on three win d-level scenarios dem on strate the efficie nt syn ergies betwee n IVPP resources.The validatio n results indicate that IVPP can optimize the supply and demand resources in in dustrial parks,thereby decarbonizing the power systems.

CALL FOR PAPERS Dec.2018 Special Issue on Large Scale Renewable Energy Integration

Guest Editor in Chief:Professor Xiao-Ping Zhang, University of Birmingham The potential for renewable energy to make contributions to mitigating the impact of climate change is expected to increase significantly in the longer term. Renewable energy generation technologies including onshore wind, offshore wind, wave,tidal, marine current, and ocean thermal energy generation as well as PV power generation, which are considered

Structured Microgrids (SμGs) and Flexible Electronic Large Power Transformers (FeLPTs)

Structured microgrids(SμGs)and Flexible electronic large power transformers(FeLPTs)are emerging as two essential technologies for renewable energy integration,flexible power transmission,and active control.SμGs provide the integration of renewable energy and storage to balance the energy demand and supply as needed for a given system design.FeLPT’s flexibility for processing,control,and re-configurability offers the capability for flexible transmission for effective flow control and enable SμGs connectivity while still keeping multiscale system level control.Early adaptors for combined heat and power have demonstrated significant economic benefits while reducing environmental foot prints.They bring tremendous benefits to utility companies also.With storage and active control capabilities,a 300-percent increase in bulk transmission and distribution lines are possible without having to increase capacity.SμGs and FeLPTs will also enable the utility industry to be better prepared for the emerging large increase in base load demand from electric transportation and data centers.This is a win-win-win situation for the consumer,the utilities(grid operators),and the environment.SμGs and FeLPTs provide value in power substation,energy surety,reliability,resiliency,and security.It is also shown that the initial cost associated with SμG and FeLPTs deployment can be easily offset with reduced operating cost,which in turn reduces the total life-cycle cost by 33%to 67%.

Optimal Placement of Distribution Generation Sources in Hybrid Generation Network

The ideal places and size of the distribution generators were determined by reducing the loss of power in the distribution networks. The ideal positioning of various kinds of DGs has been suggested in the current job. In this job, the ideal power factor for DG supply has been acquired, both the active power as well as the reactive power. In the proposed approach, different types of distribution generation (DG) supply both reactive and real power. For the optimal placement of DG sources, particle swarm optimization techniques have been used in this job. Each of these innovations has its own strengths and drawbacks. Most of the methods that have been proposed so far to formulate DG’s optimum placement problem only consider Type-I DGs, Type-II and Type-III DGs that are considered for optimal position in the existing research. In the reference, artificial bee colony algorithm was used to determine sites of DGs and condenser combinations and optimal size. The author used PSO method in the reference to determine the appropriate positioning of the DG’s and to maximize the savings of power loss and voltage profile in the distribution network.

Recent advances on smart grid technology and renewable energy integration

With the integration of renewable energy generations and other related changes,the smart grid,or the future electric power system,is confronted with new challenges and opportunities.Therefore,it is a promising subject in electrical engineering and much work has been done on it.This paper reviews the recent advances on the technologies of smart grid and renewable energy integration,from the aspects of modeling,simulation,protection and control,stability,operation,and planning.

Smart Grids with Intelligent Periphery:An Architecture for the Energy Internet

A future smart grid must fulfill the vision of the Energy Internet in which millions of people produce their own energy from renewables in their homes, offices, and factories and share it with each other. Electric vehicles and local energy storage will be widely deployed. Internet technology will be utilized to transform the power grid into an energysharing inter-grid. To prepare for the future, a smart grid with intelligent periphery, or smart GRIP, is proposed. The building blocks of GRIP architecture are called clusters and include an energy-management system （EMS）-controlled transmission grid in the core and distribution grids, micro-grids, and smart buildings and homes on the periphery; all of which are hierarchically structured. The layered architecture of GRIP allows a seamless transition from the present to the future and plug-and-play interoperability. The basic functions of a cluster consist of （1） dispatch, （2） smoothing, and （3） mitigation. A risk-limiting dispatch methodology is presented; a new device, called the electric spring, is developed for smoothing out fluctuations in periphery clusters; and means to mitigate failures are discussed.

A distributed VSG control method for a battery energy storage system with a cascaded H-bridge in a grid-connected mode

With the high penetration of renewable energy,new challenges,such as power fluctuation suppression and inertial support capability,have arisen in the power sector.Battery energy storage systems play an essential role in renewable energy integration.In this paper,a distributed virtual synchronous generator(VSG)control method for a battery energy storage system(BESS)with a cascaded H-bridge converter in a grid-connected mode is proposed.The VSG is developed without communication dependence,and state-of-charge(SOC)balancing control is achieved using the distributed average algorithm.Owing to the low varying speed of SOC,the bandwidth of the distributed communication networks is extremely slow,which decreases the cost.Therefore,the proposed method can simultaneously provide inertial support and accurate SOC balancing.The stability is also proved using root locus analysis.Finally,simulations under different conditions are carried out to verify the effectiveness of the proposed method.

Optimal allocation method of energy storage for integrated renewable generation plants based on power market simulation

This study designs and proposes a method for evaluating the configuration of energy storage for integrated re-newable generation plants in the power spot market,which adopts a two-level optimization model of“system simulation+plant optimization”.The first step is“system simulation”which is using the power market simu-lation model to obtain the initial nodal marginal price and curtailment of the integrated renewable generation plant.The second step is“plant optimization”which is using the operation optimization model of the integrated renewable generation plant to optimize the charge-discharge operation of energy storage.In the third step,“sys-tem simulation”is conducted again,and the combined power of renewable and energy storage inside the plant is brought into the system model and simulated again for 8,760 h of power market year-round to quantify and compare the power generation and revenue of the integrated renewable generation plant after applying energy storage.In the case analysis of the provincial power spot market,an empirical analysis of a 1 GW wind-solar-storage integrated generation plant was conducted.The results show that the economic benefit of energy storage is approximately proportional to its capacity and that there is a slowdown in the growth of economic benefits when the capacity is too large.In the case that the investment benefit of energy storage only considers the in-come of electric energy-related incomes and does not consider the income of capacity mechanism and auxiliary services,the income of energy storage cannot fulfill the economic requirements of energy storage investment.

Cross-seam Hybrid MTDC System for Integration and Delivery of Large-scale Renewable Energy

To better utilize the diversity of renewable energies in the U. S., this paper proposes a cross-seam hybrid multi-terminal high-voltage direct current(MTDC) system for the integration of different types of renewable energies in the U. S.Based on a developed station-hybrid converter design, the proposed hybrid MTDC system further investigates the connection methods of renewable energies and develops novel flexible power flow control strategies for realizing uninterrupted integration of renewable energies. In addition, the frequency response control of the hybrid MTDC system is proposed by utilizing the coordination between the converters in the hybrid MTDC system.The feasibility of the hybrid MTDC system and the performance of its corresponding control strategies are conducted in the PSCAD/EMTDC simulation. The simulation results indicate that the proposed hybrid MTDC system could realize the uninterrupted integration of renewable energies and flexible power transmission to both coasts of U.S.

Ensemble Wind Power Prediction Interval with Optimal Reserve Requirement

Wind power prediction interval(WPPI)models in the literature have predominantly been developed for and tested on specific case studies.However,wind behavior and characteristics can vary significantly across regions.Thus,a prediction model that performs well in one case might underperform in another.To address this shortcoming,this paper proposes an ensemble WPPI framework that integrates multiple WPPI models with distinct characteristics to improve robustness.Another important and often overlooked factor is the role of probabilistic wind power prediction(WPP)in quantifying wind power uncertainty,which should be handled by operating reserve.Operating reserve in WPPI frameworks enhances the efficacy of WPP.In this regard,the proposed framework employs a novel bi-layer optimization approach that takes both WPPI quality and reserve requirements into account.Comprehensive analysis with different real-world datasets and various benchmark models validates the quality of the obtained WPPIs while resulting in more optimal reserve requirements.

Intelligent Energy Management Strategy and Sizing Methodology for Hybrid Systems in Isolated Regions

In this study,a comprehensive approach is presented for the sizing and management of hybrid renewable energy systems(HRESs)that incorporate a variety of energy sources,while emphasizing the role of artificial neural networks(ANNs)in system management.For optimal sizing of an HRES,the monthly average method wherein historical weather data are used to calculate the monthly averages of solar irradiance and wind speed,offering a well-balanced strategy for system sizing.This ensures that the HRES is appropriately scaled to meet the actual energy requirements of the specified location,avoiding the pitfalls of over-and under-sizing,and thereby enhancing the operational efficiency.Furthermore,the study details a cutting-edge strategy that employs ANNs for managing the inherent complexities of HRESs.It elaborates on the design,modeling,and control strategies for the HRES components by utilizing Matlab/Simulink for implementation.The findings demonstrate the proficiency of the ANN-based power manager in determining the operational modes guided by a specifically designed flowchart.By integrating ANN-driven energy management strategies into an HRES,the proposed approach marks a significant advancement in system adaptability,precision control,and efficiency,thereby maximizing the effective utilization of renewable resources.

Potential of GSHP coupled with PV systems for retrofitting urban areas in different European climates based on archetypes definition

According to the recent policies regarding energy use in buildings and the need of retrofit strategies,the aim of this work is to support policies concerning the installation of ground source heat exchangers in urban and historical areas,raising the awareness on the potential energy saving achievable with optimal sizing and limited impact on the urban environment.Archetypes have been developed distinguishing among existing and historic buildings,focusing on single-family terrace houses,which are the typical residential buildings in European historic centres.A methodology for the optimal sizing of ground source heat pumps,eventually considering dual-source system or air system has been developed combining simulations of a photovoltaic system to estimate the self-sufficiency and the self-consumption for five orientations of the building.Extreme results have been obtained for warm cli-mates,with negligible heating energy demand and possibly free cooling systems rather than traditional cooling systems needed in wintertime.Penalty temperature was acceptable despite unbalanced energy demands.With proper inclination,photovoltaic systems could provide up to 40%of self-sufficiency share also in northern cli-mates.An energy-economic analysis was carried out obtaining a variety of cases representing a general overview of the European building stock and the potential benefits achievable in terms of renewable energy share,energy savings and economic investments needed to be extended to simulations at urban scale.

Towards Fully Renewable Energy Systems:Experience and Trends in Denmark

Deployment of renewable energy generation capacities and integration of their power production into existing power systems has become a global trend,with a common set of operational challenges stemming from variability and limited predictability of power generation from,e.g.,wind and solar.Denmark is a country that invested early in wind energy,rapidly proposing very ambitious goals for the future of its energy system and global energy usage.While the case of Denmark is specific due to its limited size and good interconnections,there may still be a lot to learn from the way operational practice has evolved,also from shifting towards a liberalized electricity market environment,and more generally from going along with other technological and societal evolution.The aim of this paper is to give an overview of recent and current initiatives in Denmark that contributes towards a goal of reaching a fully renewable energy system.

A Demand Response System for Wind Power Integration: Greenhouse Gas Mitigation and Reduction of Generator Cycling

A smart grid power system for a small region consisting of 1,000 residential homes with electric heating appliances from the demand side,and a generic generation mix of nuclear,hydro,coal,gas and oil-based generators representing the supply side,is investigated using agent-based simulations.The simulation includes a transactive load control in a real-time pricing electricity market.The study investigates the impacts of adding wind power and demand response(DR)on both greenhouse gas(GHG)emissions and generator cycling requirements.The results demonstrate and quantify the effectiveness of DR in mitigating the variability of renewable generation.The extent to which greenhouse gas emissions can be mitigated is found to be highly dependent on the mix of generators and their operational capacity factors.It is expected that the effects of demand response on electricity use can reduce dependency on fossil fuel-based electricity generation.However,the anticipated mitigation of GHG emissions is found to dependent on the number and efficiency of fossil fuel generators,and especially on the capacity factor at which they operate.Therefore,if a generator(the marginal seller)is forced to use less efficient fossil fuel power generation schemes,it will result in higher GHG emissions.The simulations show that DR can yield a small reduction in GHG emissions,but also lead to a smaller increase in emissions in circumstances when,for example,a generator(the marginal seller)is forced to use less efficient fossil fuel power generation schemes.Nonetheless,DR is shown to enhance overall system operation,particularly by facilitating increased penetration of variable renewable electricity generation without jeopardizing grid operation reliability.DR reduces the amount of generator cycling by an increased order of magnitude,thereby reducing wear and tear,improving generator efficiency,and avoiding the need for additional operating reserves.The effectiveness of DR for these uses depends on the participation of responsive loads,and this study highlights the need to maintain a certain degree of diversity of loads to ensure they can provide adequate responsiveness to the changing grid conditions.

Guest Editorial:Special Section on Integrating Ultra-High Levels of Variable Renewable Energy

Wind and solar energy have seen significant decreases in the cost of these technologies over that last decade which has lead to increasing levels integrated into the grid.They also offer unique benefits such as no fuel costs,quick installation,and no pollution.But as more variable renewable energy(VRE)such as wind and solar is integrated into electrical power systems.

Two-time-scale Congestion Management Scheme for Microgrid Integrated Distribution Networks

Microgrids(MGs)with high penetration of dis-tributed generators may cause congestion in the distribution net-work during operation.To address this issue,this paper proposes a two-time-scale congestion management scheme for multiple MGs integrated distribution networks.Day-ahead hourly-scale dynamic congestion management(DCM)is formulated as a con-strained optimization problem,which can be solved by utilizing the proposed alternating iterative method,with the privacy of both the distribution network and MGs being preserved.The sub-hourly-scale contract energy tracking aims at fully utilizing the controllable resources of the MGs to minimize the difference of the contract and actual exchanged energy between the MG and distribution network.Through coordination of the proposed two timescales of management schemes,the MGs integrated distribution networks can operate economically while avoiding the probable congestion predicament with high penetration of renewable energy.Simulation studies with a i3-bus system MGs integrated distribution network demonstrated this proposed approach is effective to manage the congestion problem in the distribution network,while the energy tracking approach can improve the welfare of the MGs engaged in energy contracts execution.IndexTerms-Alternating giterativemethod,congestion management,microgrids,renewable energy integration.