SAPO-34 catalyst with plate-like morphology was designed and synthesized for the first time, by the dry gel conversion method using cheap triethylamine as a structure-directing agent assisted with seed suspension cont...SAPO-34 catalyst with plate-like morphology was designed and synthesized for the first time, by the dry gel conversion method using cheap triethylamine as a structure-directing agent assisted with seed suspension containing nanosheet-like SAPO-34 seed. The latter played an important role in formation of SAPO-34 （CHA-type） with plate-like morphology. In addition, the yield of the product in the synthesis system containing seed suspension reached 97%, 15% higher than that obtained in the corre- sponding synthesis system without the seed suspension. Meanwhile, the plate-like SAPO-34 catalysts synthesized by this method exhibited higher selectivity to light olefins and longer lifetime in methanol-to-olefins （MTO） reaction than the traditional cubic SAPO-34 catalyst. This work provides a new technical route for green and efficient synthesis of SAPO-34 catalysts with improved MTO performance.展开更多
Carbon microspheres were firstly prepared using glucose （C6H12O6 ） as the starting materials by hydrotherreal carbonization. Then hollow ZrB2 spheres were successfully synthesized using zirconium oxychloride （ ZrCl...Carbon microspheres were firstly prepared using glucose （C6H12O6 ） as the starting materials by hydrotherreal carbonization. Then hollow ZrB2 spheres were successfully synthesized using zirconium oxychloride （ ZrClO2 · 8H2O）, boric acid （ H3BO3 ） by a combined solgel and boro/carbothermal reduction method, and the prepared carbon microspheres as the template. The effects of the reaction temperatures （1 200, 1 300, 1 400 and 1 500 ℃, respectively） and contents of carbon microspheres （ n （ C ） ： n （ ZrO2 ＋ B2O3） is 5. 0, 5. 5, 6. 0 and 6. 5, respectively） on the synthesis of hollow ZrB2 spheres were studied. The prepared carbon microspheres have smooth sugrace and good hollow structure by hydrothermal nitridation. Increase of reaction temperature and excessive carbon microspheres can greatly promote the formation of hollow ZrB2 spheres. The optimized reaction temperature and molar ratio of n （C）/ n （ ZrO2 ＋ B2O3 ） were 1 500 ℃ and 6.5, respectively.展开更多
In this work, we succeeded in the preparation of LiNb 1- x Ta x O 3 films on Si(111) substrates by means of sol gel process, and the usual sol gel process for the preparation of LiNbO 3 and LiTaO 3 films on Si substra...In this work, we succeeded in the preparation of LiNb 1- x Ta x O 3 films on Si(111) substrates by means of sol gel process, and the usual sol gel process for the preparation of LiNbO 3 and LiTaO 3 films on Si substrates was improved by adding a 33% aqueous solution of CH 3CH 2OH to the mixed sols of LiNb(OCH 2CH 3) 6 and LiTa(OCH 2CH 3) 6 . The crystallization behavior of LiNb 1- x Ta x O 3 films on Si(111) substrates has been studied. Highly c axis oriented LiNb 1- x Ta x O 3 films have been obtained within the tantalum composition range of \{0< x <0 33\}. Some factors such as the hydrogen termination of the silicon surface, the RTP annealing process that provides the unidirectional heat flow and the preheating temperature are discussed to analyze the crystallization of the c axis oriented films.展开更多
Li 2+ x RE x Si 1- x O 3(RE=Pr, Nd, Sm, Gd; x =0～0 15) samples were prepared by the sol gel method. DTA TG, XRD, TEM and A C impedance techniques were used to investigate the structure, sha...Li 2+ x RE x Si 1- x O 3(RE=Pr, Nd, Sm, Gd; x =0～0 15) samples were prepared by the sol gel method. DTA TG, XRD, TEM and A C impedance techniques were used to investigate the structure, shape, and ionic conductivity of these samples. The results show that the range of solid solution formation is in 0< x ≤0 09, in which the conductivity of these samples raises with the increasing amount of RE 2O 3 (RE=Pr, Nd, Sm, Gd) added, and the diameter of the powders is about 100 nm. Compared with the conventional solid state reaction, the sol gel method needs low temperature and presents high ionic conductivity.展开更多
Excellent drilling fluid techniques are one of the significant guaranteed measures to insure safety, qual- ity, efficiency, and speediness of drilling operations. Dril- ling fluids are generally discarded after the co...Excellent drilling fluid techniques are one of the significant guaranteed measures to insure safety, qual- ity, efficiency, and speediness of drilling operations. Dril- ling fluids are generally discarded after the completion of drilling operations and become waste, which can have a large negative impact on the environment. Drilling mate- rials and additives together with drill cuttings, oil, and water constitute waste drilling fluids, which ultimately are dumped onto soil, surface water, groundwater, and air. Environmental pollution is found to be a serious threat while drilling complex wells or high-temperature deep wells as these types of wells involve the use of oil-based drilling fluid systems and high-performance water-based drilling fluid systems. The preservation of the environment on a global level is now important as various organizations have set up initiatives to drive the usage of toxic chemicals as drilling fluid additives. This paper presents an approach where grass is introduced as a sustainable drilling fluid additive with no environmental problems. Simple water- based drilling fluids were formulated using bentonite, powdered grass, and water to analyze the rheological and filtration characteristics of the new drilling fluid. A particle size distribution test was conducted to determine the par- ticle size of the grass sample by the sieve analysis method. Experiments were conducted on grass samples of 300, 90, and 35 μm to study the characteristics and behavior of the newly developed drilling fluid at room temperature. The results show that grass samples with varying particle sizes and concentrations may improve the viscosity, gel strength, and filtration of the bentonite drilling fluid. These obser- vations recommend the use of grass as a rheological modifier, filtration control agent, and pH control agent to substitute toxic materials from drilling fluids.展开更多
Nanocrystalline rare earth mixed oxides DyFe x Co 1- x O 3- δ were prepared by sol gel method and characterized by X ray diffraction (XRD), thermogravimetric analysis (TG DTA) and scanning elec...Nanocrystalline rare earth mixed oxides DyFe x Co 1- x O 3- δ were prepared by sol gel method and characterized by X ray diffraction (XRD), thermogravimetric analysis (TG DTA) and scanning electron microscope (SEM). The results show that DyFe x Co 1- x O 3- δ has the structure of perovskite type at 800 ℃ for 2 h calcination. The conductivity of the materials at different temperature was measured by four probe instrumentation and two pole method. The results show that the conductivity of mixed oxides DyFe x Co 1- x O 3- δ is higher than those of un mixed oxides DyFeO 3 and DyCoO 3 and the conductivity is the best at x =0.8 in the matter of DyFe x Co 1- x O 3- δ . The conductivity of these materials always increases with the temperature rising and there is an apparent change between 600 and 800 ℃. However, the spinodals are different with different ration of Fe 3+ and Co 3+ . This kind of oxide is a conductive pottery material.展开更多
ZrO2 sizing nozzles with a basic Jormulation were prepared using 45% （by mass, the same hereinafter ） （ Mg, Y） - PSZ aggregate, 55% （ Mg, Y） - PSZ fines and 5% PVA binder. Al2O3 - ZrO2 composite powders （ 3%, ...ZrO2 sizing nozzles with a basic Jormulation were prepared using 45% （by mass, the same hereinafter ） （ Mg, Y） - PSZ aggregate, 55% （ Mg, Y） - PSZ fines and 5% PVA binder. Al2O3 - ZrO2 composite powders （ 3%, 6%, 9% and 12% ） prepared by sol - gel method were added to replace the equal amount of （ Mg, Y） - PSZfines. Effects of Al2O3 - ZrO2 composite powders on physical properties, phase composition and microstructure of the ZrO2 sizing nozzles were studied. The results show that： the performances of the modified sizing nozzles with 3% Al2O3 - ZrO2 composite powder are better than those of the nobles without composite powder used in current production process, and the thermal shock resistance of the ,former nozzles is six times of that of the latter one.展开更多
Objective To explore the protective effects of N Acetylcysteine (NAC) on exogenous hydrogen peroxide and endogenous superoxide anion induced DNA strand breakage in human spermatozoa by using the single cell gel el...Objective To explore the protective effects of N Acetylcysteine (NAC) on exogenous hydrogen peroxide and endogenous superoxide anion induced DNA strand breakage in human spermatozoa by using the single cell gel electropherosis (SCGE) Methods Sperm cells were exposed to 0.5 mmol/L of H 2O 2 or 5.0 mmol/L of β NADPH with or without 0.1, 0.5, 1.0 mmol/L of NAC. The percentage of sperm comet cells and the comet tail lengths were measured in the treated sperm cells by using SCGE. Results Both percentage of comet sperm nuclei and mean tail length in sperm cells exposed to 0.5 mmol/L hydrogen peroxide with different concentrations of NAC decrease significantly in a dose dependent manner as compared with sperm cells exposed to H 2O 2 without NAC or catalase. Although mean tail length in sperm cells exposed to 5.0 mmol/L of β NADPH with different concentrations of NAC decreases significantly compared with sperm cells exposed to β NADPH without NAC or SOD, there were no significant differences on the percentage of sperm comet cells between sperm cells exposed to 5.0 mmol/L of β NADPH with different concentrations of NAC and sperm cells exposed to 5.0 mmol/L of β NADPH without NAC. Conclusion NAC has a protective effect on exogenous hydrogen peroxide induced DNA damage, while protective effect of NAC against O - 2 induced DNA strand breakage is significant but very weak.展开更多
文摘SAPO-34 catalyst with plate-like morphology was designed and synthesized for the first time, by the dry gel conversion method using cheap triethylamine as a structure-directing agent assisted with seed suspension containing nanosheet-like SAPO-34 seed. The latter played an important role in formation of SAPO-34 （CHA-type） with plate-like morphology. In addition, the yield of the product in the synthesis system containing seed suspension reached 97%, 15% higher than that obtained in the corre- sponding synthesis system without the seed suspension. Meanwhile, the plate-like SAPO-34 catalysts synthesized by this method exhibited higher selectivity to light olefins and longer lifetime in methanol-to-olefins （MTO） reaction than the traditional cubic SAPO-34 catalyst. This work provides a new technical route for green and efficient synthesis of SAPO-34 catalysts with improved MTO performance.
基金financially supported by National Natural Science Foundation of China(General program,51272188,51472184,51472185)State Basic Research Development Program of China(973 Program,2014CB660802)+1 种基金Natural Science Foundation of Hubei Province,China(Contract No.2013CFA086)Foreign cooperation projects in Science and Technology of Hubei Province,China(Contract No.2013BHE002)
文摘Carbon microspheres were firstly prepared using glucose （C6H12O6 ） as the starting materials by hydrotherreal carbonization. Then hollow ZrB2 spheres were successfully synthesized using zirconium oxychloride （ ZrClO2 · 8H2O）, boric acid （ H3BO3 ） by a combined solgel and boro/carbothermal reduction method, and the prepared carbon microspheres as the template. The effects of the reaction temperatures （1 200, 1 300, 1 400 and 1 500 ℃, respectively） and contents of carbon microspheres （ n （ C ） ： n （ ZrO2 ＋ B2O3） is 5. 0, 5. 5, 6. 0 and 6. 5, respectively） on the synthesis of hollow ZrB2 spheres were studied. The prepared carbon microspheres have smooth sugrace and good hollow structure by hydrothermal nitridation. Increase of reaction temperature and excessive carbon microspheres can greatly promote the formation of hollow ZrB2 spheres. The optimized reaction temperature and molar ratio of n （C）/ n （ ZrO2 ＋ B2O3 ） were 1 500 ℃ and 6.5, respectively.
基金Supported by the National Natural Science Foundation of China(No.2 0 1710 15 )
文摘In this work, we succeeded in the preparation of LiNb 1- x Ta x O 3 films on Si(111) substrates by means of sol gel process, and the usual sol gel process for the preparation of LiNbO 3 and LiTaO 3 films on Si substrates was improved by adding a 33% aqueous solution of CH 3CH 2OH to the mixed sols of LiNb(OCH 2CH 3) 6 and LiTa(OCH 2CH 3) 6 . The crystallization behavior of LiNb 1- x Ta x O 3 films on Si(111) substrates has been studied. Highly c axis oriented LiNb 1- x Ta x O 3 films have been obtained within the tantalum composition range of \{0< x <0 33\}. Some factors such as the hydrogen termination of the silicon surface, the RTP annealing process that provides the unidirectional heat flow and the preheating temperature are discussed to analyze the crystallization of the c axis oriented films.
文摘Li 2+ x RE x Si 1- x O 3(RE=Pr, Nd, Sm, Gd; x =0～0 15) samples were prepared by the sol gel method. DTA TG, XRD, TEM and A C impedance techniques were used to investigate the structure, shape, and ionic conductivity of these samples. The results show that the range of solid solution formation is in 0< x ≤0 09, in which the conductivity of these samples raises with the increasing amount of RE 2O 3 (RE=Pr, Nd, Sm, Gd) added, and the diameter of the powders is about 100 nm. Compared with the conventional solid state reaction, the sol gel method needs low temperature and presents high ionic conductivity.
基金the support provided by the Deanship of Scientific Research(DSR)at King Fahd University of Petroleum&Minerals(KFUPM)for funding this work through Project No.IN 141008
文摘Excellent drilling fluid techniques are one of the significant guaranteed measures to insure safety, qual- ity, efficiency, and speediness of drilling operations. Dril- ling fluids are generally discarded after the completion of drilling operations and become waste, which can have a large negative impact on the environment. Drilling mate- rials and additives together with drill cuttings, oil, and water constitute waste drilling fluids, which ultimately are dumped onto soil, surface water, groundwater, and air. Environmental pollution is found to be a serious threat while drilling complex wells or high-temperature deep wells as these types of wells involve the use of oil-based drilling fluid systems and high-performance water-based drilling fluid systems. The preservation of the environment on a global level is now important as various organizations have set up initiatives to drive the usage of toxic chemicals as drilling fluid additives. This paper presents an approach where grass is introduced as a sustainable drilling fluid additive with no environmental problems. Simple water- based drilling fluids were formulated using bentonite, powdered grass, and water to analyze the rheological and filtration characteristics of the new drilling fluid. A particle size distribution test was conducted to determine the par- ticle size of the grass sample by the sieve analysis method. Experiments were conducted on grass samples of 300, 90, and 35 μm to study the characteristics and behavior of the newly developed drilling fluid at room temperature. The results show that grass samples with varying particle sizes and concentrations may improve the viscosity, gel strength, and filtration of the bentonite drilling fluid. These obser- vations recommend the use of grass as a rheological modifier, filtration control agent, and pH control agent to substitute toxic materials from drilling fluids.
文摘Nanocrystalline rare earth mixed oxides DyFe x Co 1- x O 3- δ were prepared by sol gel method and characterized by X ray diffraction (XRD), thermogravimetric analysis (TG DTA) and scanning electron microscope (SEM). The results show that DyFe x Co 1- x O 3- δ has the structure of perovskite type at 800 ℃ for 2 h calcination. The conductivity of the materials at different temperature was measured by four probe instrumentation and two pole method. The results show that the conductivity of mixed oxides DyFe x Co 1- x O 3- δ is higher than those of un mixed oxides DyFeO 3 and DyCoO 3 and the conductivity is the best at x =0.8 in the matter of DyFe x Co 1- x O 3- δ . The conductivity of these materials always increases with the temperature rising and there is an apparent change between 600 and 800 ℃. However, the spinodals are different with different ration of Fe 3+ and Co 3+ . This kind of oxide is a conductive pottery material.
基金financially supported by National Natural Science Foundation of China(Grant No.51372193)Natural Science Basic Research Fund of Shaanxi Province(Grant No.2014JM6224)
文摘ZrO2 sizing nozzles with a basic Jormulation were prepared using 45% （by mass, the same hereinafter ） （ Mg, Y） - PSZ aggregate, 55% （ Mg, Y） - PSZ fines and 5% PVA binder. Al2O3 - ZrO2 composite powders （ 3%, 6%, 9% and 12% ） prepared by sol - gel method were added to replace the equal amount of （ Mg, Y） - PSZfines. Effects of Al2O3 - ZrO2 composite powders on physical properties, phase composition and microstructure of the ZrO2 sizing nozzles were studied. The results show that： the performances of the modified sizing nozzles with 3% Al2O3 - ZrO2 composite powder are better than those of the nobles without composite powder used in current production process, and the thermal shock resistance of the ,former nozzles is six times of that of the latter one.
基金China Medical Board ( 980 0 1 ) and Natural Science Foundation ofAnhui Province( 99j1 0 0 95)
文摘Objective To explore the protective effects of N Acetylcysteine (NAC) on exogenous hydrogen peroxide and endogenous superoxide anion induced DNA strand breakage in human spermatozoa by using the single cell gel electropherosis (SCGE) Methods Sperm cells were exposed to 0.5 mmol/L of H 2O 2 or 5.0 mmol/L of β NADPH with or without 0.1, 0.5, 1.0 mmol/L of NAC. The percentage of sperm comet cells and the comet tail lengths were measured in the treated sperm cells by using SCGE. Results Both percentage of comet sperm nuclei and mean tail length in sperm cells exposed to 0.5 mmol/L hydrogen peroxide with different concentrations of NAC decrease significantly in a dose dependent manner as compared with sperm cells exposed to H 2O 2 without NAC or catalase. Although mean tail length in sperm cells exposed to 5.0 mmol/L of β NADPH with different concentrations of NAC decreases significantly compared with sperm cells exposed to β NADPH without NAC or SOD, there were no significant differences on the percentage of sperm comet cells between sperm cells exposed to 5.0 mmol/L of β NADPH with different concentrations of NAC and sperm cells exposed to 5.0 mmol/L of β NADPH without NAC. Conclusion NAC has a protective effect on exogenous hydrogen peroxide induced DNA damage, while protective effect of NAC against O - 2 induced DNA strand breakage is significant but very weak.
