Influence of Curing Accelerators on the Imidization of Polyamic Acids and Properties of Polyimide Films

In order to lower the imidization temperature of polyamic acids（PAA）, the catalytic activities of the curing agents p-hydroxybenzoic acid（PHA）, quinoline（QL）, benzimidazole（BI）, benzotriazole（BTA）, triethylamine（Et_3N） and 1, 8-diazabicyclo [5.4.0]undec-7-ene（DBU） were investigated in the process of thermal imidization of PAA. In addition, the effect of these various curing agents on the thermal stabilities and mechanical properties of the resultant polyimide（PI） films was determined. Quinoline was found to be an effective curing accelerator in the use of two-step method for synthesizing PI. Due to its moderate base strength, low steric crowding effect and moderate boiling point, quinoline could not only accelerate PAA to achieve imidization completely at 180 ℃, but also maintain the mechanical properties and thermal stability of the ordinary PI film. Any residual quinoline could be removed from PI films by heating at 250 ℃ for 4 h.

Imide-pillared covalent organic framework protective films as stable zinc ion-conducting interphases for dendrite-free Zn metal anodes

The notorious growth of zinc dendrite and the water-induced corrosion of zinc metal anodes(ZMAs)restrict the practical development of aqueous zinc ion batteries(AZIBs).In this work,a zinc metallized,imide-pillared covalent organic framework(ZPC)protective film has been engineered as a stable Zn^(2+)ion-conducting interphase to modulate interfacial kinetics and suppress side reactions for ZMAs.Compared to bare Zn,ZPC@Zn exhibits a higher Zn^(2+)ionic conductivity,a larger Zn^(2+)transference number,a lower electronic conductivity,a smaller desolvation activation energy and correspondingly a significant suppression of corrosion,hydrogen evolution and Zn dendrites.Impressively,the ZPC@Zn||ZPC@Zn symmetric cell obtains a cycling lifespan over 3000 h under 5 mA cm^(-2)for 1 mA h cm^(-2).The ZPC@Zn||NH_(4)V_(4)O_(10)coin-type full battery delivers a specific capacity of 195.8 mA h g^(-1)with a retention rate of78.5%at 2 A g^(-1)after 1100 cycles,and the ZPC@Zn||NH_(4)V_(4)O_(10) pouch full cell shows a retention of70.1%in reversible capacity at 3 A g^(-1)after 1100 cycles.The present incorporation of imide-linked covalent organic frameworks in the surface modification of ZMAs will offer fresh perspectives in the search for ideal protective films for the practicality of AZIBs.

Synthesis of Methyl-substituted Phthalazinone-based Aromatic Poly(amide imide)s

A series of novel aromatic poly ( amide imide)s containing phthalazinone moieties were prepared from 2-(4-aminophenyl)-4-[3-methyl-4-(4-aminophenoxy)-2,3-phthalazinone-1], a novel diamine 1 with four diimide-dicarboxylic acids by Yamazaki phosphorylation method with the inherent viscosity of 0.36~0.65 dL/g. These polymers had high glass transition temperatures above 300C and they lost 10% weight between 426~475C in N2. The structure of diamine 1 and the polymers was confirmed by IR, 1H NMR and MS. The obtained polymers were readily soluble in polar solvents such as NMP, m-cresol etc. and easily cast into tough, flexible films. The X-ray indicated that they are all amorphous.

Synthesis and Characterization of Poly(ether imide)s Containing m-Methyl and Phthalazinone Moieties

Three novel poly(ether imide)s were synthesized by one-step solution polymerization from 2-(3, 4-dicarboxyl-N-phenyl)-4-(3, 4-dicarboxyl-phenoxyl-4-(2-methyl)-phenyl)-2, 3- phthal-azin-1-one dianhydride and three amines, and characterized. The polymers show good solubility and thermal properties.

SYNTHESIS OF NEW AROMATIC POLY(AMIDE IMIDE)S FROM UNSYMMETRICAL EXTENDED DIAMINE CONTAINING A PHTHALAZINONE MOIETY

The direct polymerization of an unsymmetrical kink non-coplanar heterocyclic diamine (1) with various aromatic bis(trimellitimide)s (2a-e) using triphenyl phosphite and pyridine as condensing agents could generate a series of new aromatic poly(amide imide)s (3a-e) containing the kink non-coplanar phthalazinone heterocyclic units in the polymer main chains with inherent viscosities of 0.58-0.66 dL/g. The polymers are readily soluble in a variety of solvents such as N,N- dimethylformamide, N,N-dimethylacetamide, dimethyl sulfoxide, N-methyl-2-pyrrolidinone, pyridine and m-cresol and can be cast to form flexible and tough films. The glass transition temperatures of polymers (Tg) are in the range of 301-327°C, and the temperatures for 5% weight loss in nitrogen are in the range of 498-521 'C.

Synthesis and Characterization of Poly (ether imide)s Containing Phthalazinone and Isopropyl Moieties

A novel poly(ether imide)s containing phthalazinone and isopropyl moieties derived from 2-(4-aminophenyl)-4-[4-(4-aminophenoxy)phenyl]-phthalazin-1-one and bisphenol-A diphthalic anhydride was synthesized by one-step solution condensation polymerization in nr-cresol. The polymer was characterized by FTIR, NMR, molecular weights, glass transition temperature, thermal degradation temperature and WAXD.

Acidic Polyester Imides as Thermally Stable Binder Polymers for Negative-Tone Black Photoresist

Polyimides are well-known for their high chemical inertness and thermal stability. However, it is usually challenging to synthesize UV-curable polyimides since the imidization reaction requires such harsh conditions that acrylate type double bonds cannot withstand. In this work, synthetic methods are developed to obtain polyester-imide type binder polymers with high thermal stability, high compatibility with the other components of the black photoresist, and fine photolithographic patterning property for the negative-tone black photoresist. The syntheses of diimide-diacid or diimide-diol intermediates for the polyesterification with dianhydride gave polyester imides which meets this requirement. The photolithographic tests have shown that the patterning of the micron-sized PDL of the organic light emitting diode (OLED) panel could be obtained. This work will interest the researchers working on the design and optimization of thermally stable binder polymers.

SYNTHESIS OF POLYURETHANE MODIFIED BISMALEIMIDE (UBMI) AND POLYURETHANE-IMIDE ELASTOMER

Urethane modified bismaleimide(UBMI)was synthesized by the reaction of maleic anhydride(MA)with NCO group terminated polyurethane prepolymer(PUP)in presence of acetone.The product was determined by infrared analysis. Then ultrasonic assistant process was introduced into the solvent removal of the prepolymer mixture of UBMI and PUP. Polyurethane-imide(PUI)elastomer was synthesized from the above PUP-UBMI prepolymer mixture by the infusion technology with 2,5-dimethyl-2,5-bis(tert-butylperoxy)-hexane(B25)as l...

Synthesis of a Poly(amide-imide)from 5,6-Diphenyl-1-chloroformyl3,4-benzenedicarboxylic Anhydride and Bis (4-aminophenyl)ether

A novel poly (amide-imide) was prepared from a novel monomer: 5,6-diphenyl-chloroformyl-3,4-benzenedicarboxylic anhydride and bis (4-aminophenyl) ether. The polymer was characterized by FTIR. (HNMR)-H-1. DSC and TGA.

Reactions of Imidates with Phenoxyacetyl Chloride

The reactions of imidates including cyclic imidates, oxazolines and dihydrooxazine with phenoxyacetyl chloride, were investigated. The results indicate that diacylamide or acylamide was generated from N-phenoxyacetylated imidates, while cyclic imidate oxazolines underwent a ring-opening reaction to yield different amides depending on the reaction conditions. Even under non-nucleophilic conditions, no β-lactam-fused oxazoline derivative was obtained.

Instability of lithium bis(fluorosulfonyl)imide(LiFSI)–potassium bis(fluorosulfonyl)imide(KFSI) system with LiCoO_2 at high voltage

The cycling performance, impedance variation, and cathode surface evolution of the Li/LiCoO2 cell using Li FSI–KFSI molten salt electrolyte are reported. It is found that this battery shows poor cycling performance, with capacity retention of only about 67% after 20 cycles. It is essential to understand the origin of the instability. It is noticed that the polarization voltage and the impedance of the cell both increase slowly upon cycling. The structure and the properties of the pristine and the cycled LiCoO2 cathodes are investigated by x-ray diffraction（XRD）, scanning electron microscopy（SEM）, Raman spectroscopy, x-ray photoelectron spectroscopy（XPS）, and transmission electron microscopy（TEM）. It is found that the LiCoO2 particles are corroded by this molten salt electrolyte, and the decomposition by-product covers the surface of the LiCoO2 cathode after 20 cycles. Therefore, the surface side reaction explains the instability of the molten salt electrolyte with LiCoO2.

Synthesis and Crystal Structure of N-Phenylbis(ferrocenecarboxyl)imide

The ferrocenyl compound, N-phenylbis（ferrocenecarboxyl）imide （C28H23NO2Fe2, Mr = 517.17）, was synthesized and structurally characterized by means of X-ray single-crystal diffraction. It crystallizes in monoclinic, space group C2/c with a = 21.374（14）, b = 10.430（7）, c = 10.741（7） A, β= 114.184（8）°, V= 2184（2） A^3, Z= 4, Dc = 1.573 g/cm^3, F（000） = 1064, μ（MoKα） = 1.355 mm ^-1, T= 291（2） K, the final R = 0.0548 and wR = 0.1437 for 1524 observed reflections with 1 〉 2σ（I）. In this compound, the nitrogen atom links two ferrocenyl groups and one phenyl group forming a novel imido derivative.

Design,Synthesis and Electrochromic Properties of Anthraquinone Imide-based Donor-acceptor Type of Near Infrared Chromophores

A new series of near infrared（NIR） electrochromic anthraquinone imides containing a triphenylamine moiety as an electron donor was synthesized and their electrochemical and spectroelectrochemical behavior were investigated.The results show that the new anthraquinone imides are redox active which can be reduced electrochemically from the neutral state to the radical anion form that absorbs in a range of 700―1200 nm.

Synthesis of Poly(aryl amide imide)s Derived from o-diphenyltrimellitic Anhydride

The synthesis and characterization of a series of novel poly(aryl amide imide)s based on o diphenyltrimellitic anhydride are described.The poly(aryl amide imide)s having inherent viscosities of 0.39-1.43dL/g in N methyl 2 pyrrolidinone at 30℃,were prepared by polymerization with aromatic diamines in N,N-dimethylacetamide and subsequent chemical imidization.All the polymers were amorphous,readily soluble in aprotic polar solvents such as DMAC,NMP,DMF,DMSO,and m cresol,and could be cast to form flexible and tough films.The glass trsanition temperatures were in the range of 284-336℃,and the temperatures for 5% weight loss in nitrogen were above 468℃.

Influences of Diamines on the Morphologies and the Chemical, Thermal, and Mechanical Properties of Polyurethane-Imide Elastomers

Polyurethane-imide elastomers (PUIEs) are formed from isocyanate, polyol, acid anhydride, and diamine by liquid polymerization. Unfortunately, many of the diamines have rarely been applied to the formation of PUIEs. Hence, investigating the effect of diamines on PUIEs remains a challenge in polymer chemistry. Herein, PUIEs prepared from 4,4'-diphenylmethane diisocyanate (MDI), polytetramethylene glycol (Mw: 1000), pyromellitic dianhydride, and aromatic diamines (such as p-phenylene diamine, 4,4'-oxydianiline, and 1,3-bis(4-aminophenoxy)benzene), and aliphatic diamines (such as 1,2-ethylene diamine, 1,6-hexamethylene diamine, and 1,12-dodecamethylene diamine) were synthesized by liquid polymerization. The morphologies and the chemical, thermal, and mechanical properties of the various PUIEs were investigated. The obtained elastomeric sheets were characterized in terms of the following tests and methods: solubility and swelling tests, X-ray diffraction and differential scanning calorimetry, dynamic mechanical analysis and thermogravimetric analysis, tensile tests, nuclear magnetic resonance spectroscopy, infrared spectroscopy, atomic force microscopy, contact angle microscopy, and scanning electron

Solvothermal Synthesis,Crystal Structure and Antimicrobial Activity of a Novel Imide Nickel Complex [Ni(CH_3CONCOCH_3)_2·2(H_2O)]

A novel imide nickel complex [Ni（CH3CONCOCH3）2·2（H2O）] was synthesized by the solvothermal reaction of nickel acetate tetrahydrate and acetonitrile.What amazed us is that acetonitrile had changed into acetyl imide in enol form during the formation process of the title complex.The complex was characterized by elemental analysis,IR spectrum and X-ray single-crystal diffraction analysis.It crystallizes in the orthorhombic system,space group Pbca with a = 7.4503（7）,b = 13.1089（12）,c = 14.1303（14）,V = 1380.0（2）3,Dc = 1.420 g/cm3,Mr = 294.94,Z = 4,F（000） = 616,μ = 1.422 mm-1,the final R = 0.0487 and wR = 0.1482.The four-coordinated nickel（II） center is surrounded by 4O atoms from two imide ligands and has a distorted square planar geometry.The complex is connected to form a supramolecule with an infinite three-dimensional network through intramolecular and intermolecular hydrogen bonds.Antimicrobial activity was investigated by agar diffusion method,and the result showed that the complex was active against coli bacillus,staphylococcus aureus and bacillus subtilis.The thermal stability of the title complex was also studied by TG-DTA method.

Hydroxyalkylation of Cyclic Imides with Oxiranes Part I. Kinetics of Reaction in Presence of Triethylamine as Catalyst

Literature describes kinetics of reactions of alcohols, phenols, carboxylic acids, amines and amides with oxiranes such as ethylene oxide and propylene oxide. However, there is no information regarding kinetic of reaction of imides with oxiranes. In this article the kinetics of the reaction of cyclic monoimides: succinimide, phtalimide, and glutarimide, with ethylene and propylene oxides in presence of triethylamine in aprotic solvent was studied. The rate laws for those processes were established based upon on dilatometric measurements. I was said that cyclic monoimides react with oxiranes in presence of triethylamine to give N-(2-hydroxyalkyl)imides as major product. This product react further with oxiranes in consecutive reaction. The kinetics of the reaction of cyclic mono-imides with oxiranes obey the following rate law: V = k1/2 c1/2cat c3/2imide c1/2oxirane. Based upon kinetic data the following orders of reactivity of imides and oxiranes were obtained: phtalimide ≥ succinimide > glutarimide and ethylene oxide > propylene oxide. The solvent (DMF, DMSO and dioxane) effect was also studied. From temperature dependences the thermodynamic parameters: activation energy, enthalpy and entropy from linear Eyring plots were obtained.

6-Azido-Galactosyl Imidate as a Building Block for Preparation of 1-(4-Aminobutyl)-, Di-, Tri- and Tetra-Saccharides

6-azidogalactosyl imidate has been used as a donor to generate 1-(4-aminobutyl)-6-aminogalactose, 6-aminothiotolyl- glycosides of disaccharide, trisaccharide and tetrasaccharide that incorporates 6-azido group and 1-(4-tolyl)thio group. Trisaccharide and tetrasaccharide were obtained from lactosyl-based acceptor. The anomeric 1-(4-tolyl)thio group could be used to conjugate with sphingosine analogs to provide the alpha-Gal Sph analogs for library extension from the azido group.

Synthesis and Properties of Novel Polyurethane-Imide Elastomers

Novel polyurethane-imide elastomers were prepared from isocyanates (hexamethylene, and 4,4’-dicyclohexyl diisocyanates), polytetramethylene glycol (PTMG1000, Mw = 1000), pyromellitic dianhydride, and 4,4’-diphenylmethane diamine. The formation of PUIEs was confirmed by Fourier transform infrared spectroscopy. The resultant films were studied through X-ray diffraction analysis, contact angle measurement, atomic force microscopy, solubility and swelling tests, tensile test, differential scanning calorimetry, dynamic mechanical analysis, and thermogravimetric analysis.

STUDY ON THE SYNTHESIS AND PROPERTIES OF POLY(ESTER-IMIDEETHER)MULTIBLOCK COPOLYMERS

A new class of poly(ester-imide-ether) multiblock copolymers was synthesized by transes-terification and melt copolymerization of dimethyl terephthalate (DMT) and N-(4-carbomethoxyphenyl)-4-(carbomethoxy)-phthalimide with ethylene glycol (EG) and polytetramethylene glycol (PTMG). The structure of the above copolymers was characterized by H-1-NMR and IR spectroscopy. Some properties of the coplymers were also examined. It was found that their mechanical properties and heat stability, compared with poly(ether-ester) copolymers, were obviously improved.