With the huge rise of energy demand,the power system in the current era is moving to a new standard with increased access to renewable energy sources(RESs)integrated with distribution generation(DG)network.The RESs ne...With the huge rise of energy demand,the power system in the current era is moving to a new standard with increased access to renewable energy sources(RESs)integrated with distribution generation(DG)network.The RESs necessitate interfaces for controlling the power generation.The multilevel inverter(MLI)can be exploited for RESs in two diverse modes,namely,the power generation mode(stand-alone mode),and compensator mode(statcom).Few works have been carried out in optimization of controller gains with the load variations of the single type such as reactive load variation in different cases.Nevertheless,this load type may be unbalanced hence,to overcome such issues.So,a sophisticated optimization algorithm is important.This paper aims to introduce a control design via an optimization assisted PI controller for a 7-level inverter.In the present technique,the gains of the PI controller are adjusted dynamically by the adopted hybrid scheme,grey optimizer with dragon levy update(GD-LU),based on the operating conditions of the system.Here,the gains are adjusted such that the error between the reference signal and fault signal should be minimal.Thus,better dynamic performance could be attained by the present optimized PI controller.The proposed algorithm is the combined version of grey wolf optimization(GWO)and dragonfly algorithm(DA).Finally,the performance of the proposed work is compared and validated over other state-of-the-art models concerning error measures.展开更多
Reradiation interference(RRI) from ultra high voltage(UHV) power lines has become a hotspot for researches in electromagnetic(EM) interference between UHV power grids and adjacent radio stations.The mechanism of RRI,n...Reradiation interference(RRI) from ultra high voltage(UHV) power lines has become a hotspot for researches in electromagnetic(EM) interference between UHV power grids and adjacent radio stations.The mechanism of RRI,numerical simulations,methods of protecting distance calculation,and resonance characteristics of RRI are reviewed in this paper using results of works reported by IEEE and Chinese publications.We conclude in this review that RRI at short and medium wavelengths can be simulated using method of moment(MoM) and two commonly used models,the wire model and the surface model,which have different applicable conditions.We indicate that the accurate simulation of RRI at higher frequencies using uniform geometrical theory of diffraction is still beyond our capability because it requires studies of the relative simulation methods.We also suggest that further researches of the mechanism of RRI and the prediction of resonance frequencies above 1.7 MHz are necessary for dealing with the interference between the existing power lines and radio stations because resonance frequencies proposed by IEEE are less than 1.7 MHz.展开更多
In this paper, we propose a new attribute-based proxy re-encryption scheme, where a semi-trusted proxy, with some additional information, can transform a ciphertext under a set of attributes into a new ciphertext unde...In this paper, we propose a new attribute-based proxy re-encryption scheme, where a semi-trusted proxy, with some additional information, can transform a ciphertext under a set of attributes into a new ciphertext under another set of attributes on the same message, but not vice versa, furthermore, its security was proved in the standard model based on decisional bilinear Diffie-Hellman assumption. This scheme can be used to realize fine-grained selectively sharing of encrypted data, but the general proxy rencryption scheme severely can not do it, so the proposed schemecan be thought as an improvement of general traditional proxy re-encryption scheme.展开更多
In precision machining of complex curved surface parts with high performance, geometry accuracy is not the only constraint, but the performance should also be met. Performance of this kind of parts is closely related ...In precision machining of complex curved surface parts with high performance, geometry accuracy is not the only constraint, but the performance should also be met. Performance of this kind of parts is closely related to the geometrical and physical parameters, so the final actual size and shape are affected by multiple source constraints, such as geometry, physics, and performance. These parts are rather difficult to be manufactured and new manufacturing method according to performance requirement is urgently needed. Based on performance and manufacturing requirements for complex curved surface parts, a new classification method is proposed, which divided the complex curved surface parts into two categories： surface re-design complex curved surface parts with multi-source constraints（PRCS） and surface unique complex curved surface parts with pure geometric constraints（PUCS）. A correlation model is constructed between the performance and multi-source constraints for PRCS, which reveals the correlation between the performance and multi-source constraints. A re-design method is also developed. Through solving the correlation model of the typical paws performance-associated surface, the mapping relation between the performance-associated surface and the related removal amount is obtained. The explicit correlation model and the method for the corresponding related removal amount of the performance-associated surface are built based on the classification of surface re-design complex curved surface parts with multi-source constraints. Research results have been used in the actual processing of the typical parts such as radome, common bottom components, nozzle, et al., which shows improved efficiency and accuracy of the precision machining for the surface re-design parts with complex curved surface.展开更多
RE(NO_3)_3-HNO_3-P507-kerosene extraction system(RE=La,Ce,Pr,Nd,Sm,Eu,Gd,Tb,Dy,Ho,Er, Tm,Yb,Lu,Y)was studied by the response surface technique.14 models for extracting single rare earth ele- ment in a broad range of a...RE(NO_3)_3-HNO_3-P507-kerosene extraction system(RE=La,Ce,Pr,Nd,Sm,Eu,Gd,Tb,Dy,Ho,Er, Tm,Yb,Lu,Y)was studied by the response surface technique.14 models for extracting single rare earth ele- ment in a broad range of acidity and initial rare earth concentration were obtained by using the stepwise regression method.Three-dimensional display of the response surface of the model of extracting Er^(3+)was showed as an example,which reveals clearly the dependence of distribution ratio upon both initial acidity and ini- tial rare earth concentration.展开更多
On the basis of the statistical characteristics of fatigue cumulative damageand its critical value, a new dynamic interference model for reliability analysis is presented. Because the nonlinearity of fatigue damage ac...On the basis of the statistical characteristics of fatigue cumulative damageand its critical value, a new dynamic interference model for reliability analysis is presented. Because the nonlinearity of fatigue damage accumulation is taken into account,this model is able to predict the fatigue reliability for random spectrum loadingconveniently. To verify the predicted results, a special fatigue expenment, in which thenumber of specimen is up to 101, is conducted using a fighter spectrum loading. It isshown that the new model is reliable, practicable and better than existing models.展开更多
Oriented to CAD/CAM seamless integration, this paper presents an idea for synthetically considering the qualitative history model, which represents the whole course of modeling, and the quantitative geometry model, wh...Oriented to CAD/CAM seamless integration, this paper presents an idea for synthetically considering the qualitative history model, which represents the whole course of modeling, and the quantitative geometry model, which contains the extended Brep model, CSG and feature pedigree. History model building captures in background the dynamic interactive definition of engineering requirement and then explicitly conveys the original intention to successive application layers, which is conductive to the decision support of manufacturing planning in not only automatic geometry re constructing but also machining set up. G DSG theory as an earlier achievement is applied to generate the topology independent generalized mid model as an input to manufacturing planning, which is therefore simplified and its accuracy is simultaneously improved. Manufacturing planning lays emphasis on optimizing the mapping in both geometry and function from part itself to detail machining scheme. Comparatively, process planning pays more attention to the mapping to those items like tool, fixture, etc. Theoretically, such an idea is also beneficial to realizing the parametric NC machining trajectory generation and maintaining its dynamic consistency with the update of the design model.[WT5”HZ]展开更多
It is widely acknowledged that Requirements Engineering (RE) has an important implication for the overall success of software or system development projects. As more and more organizations consider RE as the principal...It is widely acknowledged that Requirements Engineering (RE) has an important implication for the overall success of software or system development projects. As more and more organizations consider RE as the principal problem areas in the projects, improving RE process therefore appears critical for future business success. Moreover, nowadays there are evidences that support improving RE process maturity can contributes to improved business performance. There exist generic Software Process Improvement (SPI) standards, specialised RE process improvement models as well as guidance and advices on RE. However, they suffer from various issues that limit their adoption by organizations that are interested to assess and improve their RE process capability. Therefore, the research presented in this paper proposes a new RE process improvement model. The model is built by adapting and expanding the structure of the continuous representation of the formal maturity framework Capability Maturity Model Integration for Development (CMMI-DEV) developed by the Software Engineering Institute (SEI) through three rounds of development and validation stages, which involved RE and CMMI expert panel in the software industry. This paper aims to provide an overview on what, why and how we build the maturity model for RE. The intention is to provide a foundation for future development in the area of RE process improvement.展开更多
In this paper, we propose a dynamic multi-descriptor fusion （DMDF） approach to improving the retrieval accuracy of 3-dimensional （3D） model retrieval systems. First, an independent retrieval list is generated by u...In this paper, we propose a dynamic multi-descriptor fusion （DMDF） approach to improving the retrieval accuracy of 3-dimensional （3D） model retrieval systems. First, an independent retrieval list is generated by using each individual descriptor. Second, we propose an automatic relevant/irrelevant models selection （ARMS） approach to selecting the relevant and irrelevant 3D models automatically without any user interaction. A weighted distance, in which the weight associated with each individual descriptor is learnt by using the selected relevant and irrelevant models, is used to measure the similarity between two 3D models. Furthermore, a descriptor-dependent adaptive query point movement （AQPM） approach is employed to update every feature vector. This set of new feature vectors is used to index 3D models in the next search process. Four 3D model databases are used to compare the retrieval accuracy of our proposed DMDF approach with several descriptors as well as some well-known information fusion methods. Experimental results have shown that our proposed DMDF approach provides a promising retrieval result and always yields the best retrieval accuracy.展开更多
文摘With the huge rise of energy demand,the power system in the current era is moving to a new standard with increased access to renewable energy sources(RESs)integrated with distribution generation(DG)network.The RESs necessitate interfaces for controlling the power generation.The multilevel inverter(MLI)can be exploited for RESs in two diverse modes,namely,the power generation mode(stand-alone mode),and compensator mode(statcom).Few works have been carried out in optimization of controller gains with the load variations of the single type such as reactive load variation in different cases.Nevertheless,this load type may be unbalanced hence,to overcome such issues.So,a sophisticated optimization algorithm is important.This paper aims to introduce a control design via an optimization assisted PI controller for a 7-level inverter.In the present technique,the gains of the PI controller are adjusted dynamically by the adopted hybrid scheme,grey optimizer with dragon levy update(GD-LU),based on the operating conditions of the system.Here,the gains are adjusted such that the error between the reference signal and fault signal should be minimal.Thus,better dynamic performance could be attained by the present optimized PI controller.The proposed algorithm is the combined version of grey wolf optimization(GWO)and dragonfly algorithm(DA).Finally,the performance of the proposed work is compared and validated over other state-of-the-art models concerning error measures.
基金Project supported by National Natural Science Foundation of China （51307098）, Hubei Provincial Natural Science Foundation of China （2012FFB03701）.
文摘Reradiation interference(RRI) from ultra high voltage(UHV) power lines has become a hotspot for researches in electromagnetic(EM) interference between UHV power grids and adjacent radio stations.The mechanism of RRI,numerical simulations,methods of protecting distance calculation,and resonance characteristics of RRI are reviewed in this paper using results of works reported by IEEE and Chinese publications.We conclude in this review that RRI at short and medium wavelengths can be simulated using method of moment(MoM) and two commonly used models,the wire model and the surface model,which have different applicable conditions.We indicate that the accurate simulation of RRI at higher frequencies using uniform geometrical theory of diffraction is still beyond our capability because it requires studies of the relative simulation methods.We also suggest that further researches of the mechanism of RRI and the prediction of resonance frequencies above 1.7 MHz are necessary for dealing with the interference between the existing power lines and radio stations because resonance frequencies proposed by IEEE are less than 1.7 MHz.
基金the Natural Science Foundation of Shandong Province (Y2007G37)the Science and Technology Development Program of Shandong Province (2007GG10001012)
文摘In this paper, we propose a new attribute-based proxy re-encryption scheme, where a semi-trusted proxy, with some additional information, can transform a ciphertext under a set of attributes into a new ciphertext under another set of attributes on the same message, but not vice versa, furthermore, its security was proved in the standard model based on decisional bilinear Diffie-Hellman assumption. This scheme can be used to realize fine-grained selectively sharing of encrypted data, but the general proxy rencryption scheme severely can not do it, so the proposed schemecan be thought as an improvement of general traditional proxy re-encryption scheme.
基金supported by Key Program of National Natural Science Foundation of China(Grant No.50835001)Program for New Century Excellent Talents in University,China(Grant No.NCET-13-0081)
文摘In precision machining of complex curved surface parts with high performance, geometry accuracy is not the only constraint, but the performance should also be met. Performance of this kind of parts is closely related to the geometrical and physical parameters, so the final actual size and shape are affected by multiple source constraints, such as geometry, physics, and performance. These parts are rather difficult to be manufactured and new manufacturing method according to performance requirement is urgently needed. Based on performance and manufacturing requirements for complex curved surface parts, a new classification method is proposed, which divided the complex curved surface parts into two categories： surface re-design complex curved surface parts with multi-source constraints（PRCS） and surface unique complex curved surface parts with pure geometric constraints（PUCS）. A correlation model is constructed between the performance and multi-source constraints for PRCS, which reveals the correlation between the performance and multi-source constraints. A re-design method is also developed. Through solving the correlation model of the typical paws performance-associated surface, the mapping relation between the performance-associated surface and the related removal amount is obtained. The explicit correlation model and the method for the corresponding related removal amount of the performance-associated surface are built based on the classification of surface re-design complex curved surface parts with multi-source constraints. Research results have been used in the actual processing of the typical parts such as radome, common bottom components, nozzle, et al., which shows improved efficiency and accuracy of the precision machining for the surface re-design parts with complex curved surface.
文摘RE(NO_3)_3-HNO_3-P507-kerosene extraction system(RE=La,Ce,Pr,Nd,Sm,Eu,Gd,Tb,Dy,Ho,Er, Tm,Yb,Lu,Y)was studied by the response surface technique.14 models for extracting single rare earth ele- ment in a broad range of acidity and initial rare earth concentration were obtained by using the stepwise regression method.Three-dimensional display of the response surface of the model of extracting Er^(3+)was showed as an example,which reveals clearly the dependence of distribution ratio upon both initial acidity and ini- tial rare earth concentration.
文摘On the basis of the statistical characteristics of fatigue cumulative damageand its critical value, a new dynamic interference model for reliability analysis is presented. Because the nonlinearity of fatigue damage accumulation is taken into account,this model is able to predict the fatigue reliability for random spectrum loadingconveniently. To verify the predicted results, a special fatigue expenment, in which thenumber of specimen is up to 101, is conducted using a fighter spectrum loading. It isshown that the new model is reliable, practicable and better than existing models.
文摘Oriented to CAD/CAM seamless integration, this paper presents an idea for synthetically considering the qualitative history model, which represents the whole course of modeling, and the quantitative geometry model, which contains the extended Brep model, CSG and feature pedigree. History model building captures in background the dynamic interactive definition of engineering requirement and then explicitly conveys the original intention to successive application layers, which is conductive to the decision support of manufacturing planning in not only automatic geometry re constructing but also machining set up. G DSG theory as an earlier achievement is applied to generate the topology independent generalized mid model as an input to manufacturing planning, which is therefore simplified and its accuracy is simultaneously improved. Manufacturing planning lays emphasis on optimizing the mapping in both geometry and function from part itself to detail machining scheme. Comparatively, process planning pays more attention to the mapping to those items like tool, fixture, etc. Theoretically, such an idea is also beneficial to realizing the parametric NC machining trajectory generation and maintaining its dynamic consistency with the update of the design model.[WT5”HZ]
文摘It is widely acknowledged that Requirements Engineering (RE) has an important implication for the overall success of software or system development projects. As more and more organizations consider RE as the principal problem areas in the projects, improving RE process therefore appears critical for future business success. Moreover, nowadays there are evidences that support improving RE process maturity can contributes to improved business performance. There exist generic Software Process Improvement (SPI) standards, specialised RE process improvement models as well as guidance and advices on RE. However, they suffer from various issues that limit their adoption by organizations that are interested to assess and improve their RE process capability. Therefore, the research presented in this paper proposes a new RE process improvement model. The model is built by adapting and expanding the structure of the continuous representation of the formal maturity framework Capability Maturity Model Integration for Development (CMMI-DEV) developed by the Software Engineering Institute (SEI) through three rounds of development and validation stages, which involved RE and CMMI expert panel in the software industry. This paper aims to provide an overview on what, why and how we build the maturity model for RE. The intention is to provide a foundation for future development in the area of RE process improvement.
基金supported in part by“MOST”under Grants No.102-2632-E-216-001-MY3 and No.104-2221-E-216-010-MY2
文摘In this paper, we propose a dynamic multi-descriptor fusion （DMDF） approach to improving the retrieval accuracy of 3-dimensional （3D） model retrieval systems. First, an independent retrieval list is generated by using each individual descriptor. Second, we propose an automatic relevant/irrelevant models selection （ARMS） approach to selecting the relevant and irrelevant 3D models automatically without any user interaction. A weighted distance, in which the weight associated with each individual descriptor is learnt by using the selected relevant and irrelevant models, is used to measure the similarity between two 3D models. Furthermore, a descriptor-dependent adaptive query point movement （AQPM） approach is employed to update every feature vector. This set of new feature vectors is used to index 3D models in the next search process. Four 3D model databases are used to compare the retrieval accuracy of our proposed DMDF approach with several descriptors as well as some well-known information fusion methods. Experimental results have shown that our proposed DMDF approach provides a promising retrieval result and always yields the best retrieval accuracy.
