Centrifuge modeling of unreinforced and multi-row stabilizing piles reinforced landslides subjected to reservoir water level fluctuation

With the construction of the Three Gorges Reservoir dam,frequent reservoir landslide events have been recorded.In recent years,multi-row stabilizing piles(MRSPs)have been used to stabilize massive reservoir landslides in China.In this study,two centrifuge model tests were carried out to study the unreinforced and MRSP-reinforced slopes subjected to reservoir water level(RWL)operation,using the Taping landslide as a prototype.The results indicate that the RWL rising can provide lateral support within the submerged zone and then produce the inward seepage force,eventually strengthening the slope stability.However,a rapid RWL drawdown may induce outward seepage forces and a sudden debuttressing effect,consequently reducing the effective soil normal stress and triggering partial pre-failure within the RWL fluctuation zone.Furthermore,partial deformation and subsequent soil structure damage generate excess pore water pressures,ultimately leading to the overall failure of the reservoir landslide.This study also reveals that a rapid increase in the downslope driving force due to RWL drawdown significantly intensifies the lateral earth pressures exerted on the MRSPs.Conversely,the MRSPs possess a considerable reinforcement effect on the reservoir landslide,transforming the overall failure into a partial deformation and failure situated above and in front of the MRSPs.The mechanical transfer behavior observed in the MRSPs demonstrates a progressive alteration in relation to RWL fluctuations.As the RWL rises,the mechanical states among MRSPs exhibit a growing imbalance.The shear force transfer factor(i.e.the ratio of shear forces on pile of the n th row to that of the first row)increases significantly with the RWL drawdown.This indicates that the mechanical states among MRSPs tend toward an enhanced equilibrium.The insights gained from this study contribute to a more comprehensive understanding of the failure mechanisms of reservoir landslides and the mechanical behavior of MRSPs in reservoir banks.

Research advances on the mechanisms of reservoir formation and hydrocarbon accumulation and the oil and gas development methods of deep and ultra-deep marine carbonates

Based on the new data of drilling, seismic, logging, test and experiments, the key scientific problems in reservoir formation, hydrocarbon accumulation and efficient oil and gas development methods of deep and ultra-deep marine carbonate strata in the central and western superimposed basin in China have been continuously studied.(1) The fault-controlled carbonate reservoir and the ancient dolomite reservoir are two important types of reservoirs in the deep and ultra-deep marine carbonates. According to the formation origin, the large-scale fault-controlled reservoir can be further divided into three types:fracture-cavity reservoir formed by tectonic rupture, fault and fluid-controlled reservoir, and shoal and mound reservoir modified by fault and fluid. The Sinian microbial dolomites are developed in the aragonite-dolomite sea. The predominant mound-shoal facies, early dolomitization and dissolution, acidic fluid environment, anhydrite capping and overpressure are the key factors for the formation and preservation of high-quality dolomite reservoirs.(2) The organic-rich shale of the marine carbonate strata in the superimposed basins of central and western China are mainly developed in the sedimentary environments of deep-water shelf of passive continental margin and carbonate ramp. The tectonic-thermal system is the important factor controlling the hydrocarbon phase in deep and ultra-deep reservoirs, and the reformed dynamic field controls oil and gas accumulation and distribution in deep and ultra-deep marine carbonates.(3) During the development of high-sulfur gas fields such as Puguang, sulfur precipitation blocks the wellbore. The application of sulfur solvent combined with coiled tubing has a significant effect on removing sulfur blockage. The integrated technology of dual-medium modeling and numerical simulation based on sedimentary simulation can accurately characterize the spatial distribution and changes of the water invasion front.Afterward, water control strategies for the entire life cycle of gas wells are proposed, including flow rate management, water drainage and plugging.(4) In the development of ultra-deep fault-controlled fractured-cavity reservoirs, well production declines rapidly due to the permeability reduction, which is a consequence of reservoir stress-sensitivity. The rapid phase change in condensate gas reservoir and pressure decline significantly affect the recovery of condensate oil. Innovative development methods such as gravity drive through water and natural gas injection, and natural gas drive through top injection and bottom production for ultra-deep fault-controlled condensate gas reservoirs are proposed. By adopting the hierarchical geological modeling and the fluid-solid-thermal coupled numerical simulation, the accuracy of producing performance prediction in oil and gas reservoirs has been effectively improved.

Research on thermal insulation materials properties under HTHP conditions for deep oil and gas reservoir rock ITP-Coring

Deep oil and gas reservoirs are under high-temperature conditions,but traditional coring methods do not consider temperature-preserved measures and ignore the influence of temperature on rock porosity and permeability,resulting in distorted resource assessments.The development of in situ temperaturepreserved coring(ITP-Coring)technology for deep reservoir rock is urgent,and thermal insulation materials are key.Therefore,hollow glass microsphere/epoxy resin thermal insulation materials(HGM/EP materials)were proposed as thermal insulation materials.The materials properties under coupled hightemperature and high-pressure(HTHP)conditions were tested.The results indicated that high pressures led to HGM destruction and that the materials water absorption significantly increased;additionally,increasing temperature accelerated the process.High temperatures directly caused the thermal conductivity of the materials to increase;additionally,the thermal conduction and convection of water caused by high pressures led to an exponential increase in the thermal conductivity.High temperatures weakened the matrix,and high pressures destroyed the HGM,which resulted in a decrease in the tensile mechanical properties of the materials.The materials entered the high elastic state at 150℃,and the mechanical properties were weakened more obviously,while the pressure led to a significant effect when the water absorption was above 10%.Meanwhile,the tensile strength/strain were 13.62 MPa/1.3%and 6.09 MPa/0.86%at 100℃ and 100 MPa,respectively,which meet the application requirements of the self-designed coring device.Finally,K46-f40 and K46-f50 HGM/EP materials were proven to be suitable for ITP-Coring under coupled conditions below 100℃ and 100 MPa.To further improve the materials properties,the interface layer and EP matrix should be optimized.The results can provide references for the optimization and engineering application of materials and thus technical support for deep oil and gas resource development.

Development status and research recommendations for thermal extraction technology in deep hot dry rock reservoirs

Based on a comprehensive review of domestic and foreign literature, this article discusses the technical difficulties and development status of enhanced geothermal system(EGS) concerning the thermal energy extraction of deep hot dry rock(HDR) reservoirs and proposes suggestions for the research focus of numerical simulation of HDR reservoir stimulation. Additionally, it summarizes the existing methods and mainstream working fluids for HDR reservoir stimulation. The article emphasizes the significance of factors such as well location, production well depth, artificial fracture orientation, and complexity in optimizing the thermal production efficiency of the EGS. Furthermore, this article delves into a detailed discussion on the influence of fracture spacing, fracture permeability,fracture length, fluid injection rate, and injected fluid temperature on the performance of the EGS. In light of the thermo-hydro-mechanical coupling challenges associated with high-temperature reservoirs, it is suggested that future research efforts should focus on investigating the impact of thermo-induced stresses on the stability of the artificial fracture network within the EGS during long-term(>30 years) circulation of hot and cold fluids.

Research on Quantitative Identification of Three-Dimensional Connectivity of Fractured-Vuggy Reservoirs

The fractured-vuggy carbonate oil resources in the western basin of China are extremely rich.The connectivity of carbonate reservoirs is complex,and there is still a lack of clear understanding of the development and topological structure of the pore space in fractured-vuggy reservoirs.Thus,effective prediction of fractured-vuggy reservoirs is difficult.In view of this,this work employs adaptive point cloud technology to reproduce the shape and capture the characteristics of a fractured-vuggy reservoir.To identify the complex connectivity among pores,fractures,and vugs,a simplified one-dimensional connectivity model is established by using the meshless connection element method(CEM).Considering that different types of connection units have different flow characteristics,a sequential coupling calculation method that can efficiently calculate reservoir pressure and saturation is developed.By automatic history matching,the dynamic production data is fitted in real-time,and the characteristic parameters of the connection unit are inverted.Simulation results show that the three-dimensional connectivity model of the fractured-vuggy reservoir built in this work is as close as 90%of the fine grid model,while the dynamic simulation efficiency is much higher with good accuracy.

Source Enrichment Control on the Scale of Magmatic-Hydrothermal W-Sn Mineralization:Insights from Triassic and Jurassic Magma Reservoirs in the Continental Crust,Xitian,South China

There are two factors,source composition and magmatic differentiation,potentially controlling W-Sn mineralization.Which one is more important is widely debated and may need to be determined for each individual deposit.The Xitian granite batholith located in South China is a natural laboratory for investigating the above problem.It consists essentially of two separate components,formed in the Triassic at ca.226 Ma and Jurassic at ca.152 Ma,respectively.The Triassic and Jurassic rocks are both composed of porphyritic and fine-grained phases.The latter resulted from highlydifferentiated porphyritic ones but they have similar textural characteristics and mineral assemblages,indicating that they reached a similar degree of crystal fractionation.Although both fine-grained phases are highly differentiated with elevated rare metal contents,economic W–Sn mineralization is rare in the Triassic granitoids and this can be attributed to less fertile source materials than their Jurassic counterparts,with a slightly more enriched isotopic signature and whole-rockεNd(226 Ma)of−10.4 to−9.2(2σ=0.2)compared withεNd(152 Ma)of−9.2 to−8.2(2σ=0.2)for the Jurassic rocks.The initial W-Sn enrichment was derived from the metasedimentary rocks and strongly enhanced by reworking of the continental crust,culminating in the Jurassic.

Formation mechanisms and resource potential of carbonate geothermal reservoirs in the Beijing-Tianjin-Hebei plain

Investigating the formation mechanisms of carbonate geothermal reservoirs is of theoretical and practical significance for summarizing the formation pattern of geothermal resources and further guiding their effective exploitation.The Beijing-Tianjin-Hebei Plain(BTHP),predominantly located within the Jizhong Depression and Cangxian Uplift in the Bohai Bay Basin,serves as the primary region for geothermal exploitation and utilization in China.More than 1500 geothermal wells have been drilled therein,with water temperature at the wellhead ranging from 55 to 110°C,single-well flow rate ranging between 80 and 120 m^(3)/h,and cumulative heating area exceeding 100×10^(6)m^(3).However,the exploration and research in the region remain limited overall.As per the previous geothermal and petroleum exploration results and the latest geothermal drilling data,this study comprehensively evaluated the geothermal resources of karst geothermal reservoirs.The results show that two suites of carbonate karst reservoirs,namely the Jxw Formation and the Ordovician strata,have primarily developed in the BTHP,and their formation and evolution can be divided into four stages:the Mesoproterozoic-Early Paleozoic stage with carbonate sedimentation and the development of interlayer karst,the Late Paleozoic stage with the development of direct sedimentary cover,the Mesozoic stage with compressional uplifting and development of buried hill karst,and the Cenozoic stage with regional cover deposition and the modification and finalization of karst geothermal reservoirs.Accordingly,the porosity evolution history of the geothermal reservoirs is composed of three stages,namely a significant decrease followed by a minor increase,a gradual decline,and then a small fluctuation from increase to decrease before slowly rising again.The karstification in geothermal reservoirs can be summarized into quasi-syngenetic karstification,epigenetic karstification,and burial karstification,which can be subdivided into seven subcategories.The carbonate geothermal reservoirs in the study area boast total geothermal resources of 53.821×10^(9)GJ,or 184.155×10^(9)t of standard coal equivalent(tce),and the annual exploitable geothermal resources in the urban area can heat an area of(400‒500)×10^(6)m^(3),indicating great potential of geothermal exploitation.

Enrichment model and major controlling factors of below-source tight oil in Lower Cretaceous Fuyu reservoirs in northern Songliao Basin,NE China

Based on the geochemical,seismic,logging and drilling data,the Fuyu reservoirs of the Lower Cretaceous Quantou Formation in northern Songliao Basin are systematically studied in terms of the geological characteristics,the tight oil enrichment model and its major controlling factors.First,the Quantou Formation is overlaid by high-quality source rocks of the Upper Cretaceous Qingshankou Formation,with the development of nose structure around sag and the broad and continuous distribution of sand bodies.The reservoirs are tight on the whole.Second,the configuration of multiple elements,such as high-quality source rocks,reservoir rocks,fault,overpressure and structure,controls the tight oil enrichment in the Fuyu reservoirs.The source-reservoir combination controls the tight oil distribution pattern.The pressure difference between source and reservoir drives the charging of tight oil.The fault-sandbody transport system determines the migration and accumulation of oil and gas.The positive structure is the favorable place for tight oil enrichment,and the fault-horst zone is the key part of syncline area for tight oil exploration.Third,based on the source-reservoir relationship,transport mode,accumulation dynamics and other elements,three tight oil enrichment models are recognized in the Fuyu reservoirs:(1)vertical or lateral migration of hydrocarbon from source rocks to adjacent reservoir rocks,that is,driven by overpressure,hydrocarbon generated is migrated vertically or laterally to and accumulates in the adjacent reservoir rocks;(2)transport of hydrocarbon through faults between separated source and reservoirs,that is,driven by overpressure,hydrocarbon migrates downward through faults to the sandbodies that are separated from the source rocks;and(3)migration of hydrocarbon through faults and sandbodies between separated source and reservoirs,that is,driven by overpressure,hydrocarbon migrates downwards through faults to the reservoir rocks that are separated from the source rocks,and then migrates laterally through sandbodies.Fourth,the differences in oil source conditions,charging drive,fault distribution,sandbody and reservoir physical properties cause the differential enrichment of tight oil in the Fuyu reservoirs.Comprehensive analysis suggests that the Fuyu reservoir in the Qijia-Gulong Sag has good conditions for tight oil enrichment and has been less explored,and it is an important new zone for tight oil exploration in the future.

Characteristics of Geothermal Reservoir and Evaluation of Geothermal Resources in Shahejie Formation of Damintun Depression

Damintun Depression is a key experimental area for promoting geothermal energy construction in Liaohe Oilfield during the dual-carbon period,and has a good potential for geothermal resources.Ascertaining the geological conditions in this area and accurately evaluating the geothermal resources in this area can provide theoretical support for the exploitation and utilization of geothermal resources in mining areas and the transformation of energy structure.In this paper,the geological structure,distribution of geothermal reservoir,earth temperature field and water chemical characteristics of Damintun Depression were analyzed comprehensively.The occurrence characteristics of geothermal resources in this block were revealed,and the amount of the resources was estimated.The results show that the main geothermal reservoir layers in this area are the first and third members of the Paleogene Shahejie Formation,which are the main target layers for geothermal development.The gradient of earth temperature in this ares is 2.8-3.5℃/100 m,and it is high in the west and north and low in the east and south.The total amount of geothermal reservoir resources in the favorable area of the research block is 783.28×10^(6) GJ,equivalent to 2672.69×10^(4) tons of standard coal.The amount of recoverable geothermal reservoir resources is 195.827×10^(6) GJ,equivalent to 668.17×10^(4) tons of standard coal.

Geological reservoir and resource potential(10^(13)m^(3))of gas hydrates in the South China Sea

A detailed understanding of the distribution and potential of natural gas hydrate(NGHs)resources is crucial to fostering the industrialization of those resources in the South China Sea,where NGHs are abundant.In this study,this study analyzed the applicability of resource evaluation methods,including the volumetric,genesis,and analogy methods,and estimated NGHs resource potential in the South China Sea by using scientific resource evaluation methods based on the factors controlling the geological accumulation and the reservoir characteristics of NGHs.Furthermore,this study compared the evaluation results of NGHs resource evaluations in representative worldwise sea areas via rational analysis.The results of this study are as follows:(1)The gas hydrate accumulation in the South China Sea is characterized by multiple sources of gas supply,multi-channel migration,and extensive accumulation,which are significantly different from those of oil and gas and other unconventional resources.(2)The evaluation of gas hydrate resources in the South China Sea is a highly targeted,stratified,and multidisciplinary evaluation of geological resources under the framework of a multi-type gas hydrate resource evaluation system and focuses on the comprehensive utilization of multi-source heterogeneous data.(3)Global NGHs resources is n×10^(15)m^(3),while the NGHs resources in the South China Sea are estimated to be 10^(13)m^(3),which is comparable to the abundance of typical marine NGHs deposits in other parts of the world.In the South China Sea,the NGHs resources have a broad prospect and provide a substantial resource base for production tests and industrialization of NGHs.

Percolation Network Modeling of Electrical Properties of Reservoir Rock*

Based on the percolation network model characterizing reservoir rock＇s pore structure and fluid characteristics, this paper qualitatively studies the effects of pore size, pore shape, pore connectivity, and the amount of micropores on the I - Sw curve using numerical modeling. The effects of formation water salinity on the electrical resistivity of the rock are discussed. Then the relative magnitudes of the different influencing factors are discussed. The effects of the different factors on the I - Sw curve are analyzed by fitting simulation results. The results show that the connectivity of the void spaces and the amount of micropores have a large effect on the I - S, curve, while the other factors have little effect. The formation water salinity has a large effect on the absolute resistivity values. The non-Archie phenomenon is prevalent, which is remarkable in rocks with low permeability.

Research on the Seismic Wave Field of Karst Cavern Reservoirs near Deep Carbonate Weathered Crusts

Fracture and cavern hydrocarbon reservoirs in carbonates are an important pool type worldwide. The karst cavern reservoirs are easiest to identify on seismic reflection data. The prediction, exploration, and development of this type of reservoir require theoretical research on seismic wave fields reflected from complex inhomogeneous media. We compute synthetic seismic sections for fluidfilled cavern reservoirs of various heights and widths using random media models and inhomogeneous media elastic wave equations. Results indicate that even caverns significantly smaller than 1/ 4 wavelength are detectible on conventional band-width seismic sections as diffractions migrated into bead-type events. Diffraction amplitude is a function of cavern height and width. We introduce a width-amplitude factor which can be used to calculate the diffraction amplitude of a cavern with a limited width from the diffraction amplitude computed for an infinitely wide cavern.

纤维织物增强高延性混凝土加固RC短柱抗剪性能试验研究

为研究纤维织物增强高延性混凝土(TR-HDC)加固钢筋混凝土短柱的抗剪性能,设计了6根钢筋混凝土柱,包括2个对比柱和4个TR-HDC加固柱.通过低周反复荷载试验,对比分析剪跨比、纤维织物层数对试件破坏形态、变形、承载力和耗能能力的影响.结果表明:采用TR-HDC加固钢筋混凝土短柱,可显著提高其抗剪承载力;TR-HDC与原混凝土柱协同工作性能良好,加固后的混凝土柱的变形、承载力和耗能能力明显提高;增加纤维织物的层数对钢筋混凝土短柱的抗剪承载力提高幅度较小,但可大幅增强柱的耗能和变形能力;剪跨比较大时,更有利于发挥TR-HDC加固材料的力学性能.基于桁架-拱模型,提出TR-HDC加固钢筋混凝土短柱的抗剪承载力计算方法,计算结果较准确.

考虑填充墙的RC框架结构性能指标限值确定方法

填充墙钢筋混凝土(RC)框架结构是我国应用最为广泛的结构形式之一,而我国规范中给出的此类结构性能指标限值并未充分考虑填充墙对整体结构破坏状态的影响。遵循我国规范中对结构破坏状态的定义原则,提出基于构件破坏率的填充墙RC框架结构性能指标限值确定方法,为此类结构破坏状态与工程需求参数对应关系的研究提供新的思路。以典型结构为例建立数值分析模型,采用该文方法计算考虑填充墙的RC框架结构性能指标限值,并与不考虑填充墙的“纯框架”限值进行了对比分析。相较于“纯框架指标”,该文指标完好、轻微破坏、中等破坏和严重破坏四个破坏状态的层间位移角上限值均更小,其中,完好状态的上限值为1/832,远小于规范中规定的弹性层间位移角限值1/550,说明判定填充墙RC框架结构的破坏状态时,直接应用规范限值会低估结构的破坏程度。

基于新的改进Bouc-Wen模型的预制RC桥墩滞回模型研究

Bouc-Wen-Baber-Noori(BWBN)模型是改进的Bouc-Wen模型。BWBN模型可以较好地描述钢筋混凝土结构在强震作用下的捏缩效应,但由于BWBN模型中“捏缩效应”函数复杂且参数较多,其计算效率较低。针对该问题,该文基于近似狄拉克δ函数构建更简单、高效的“捏缩效应”函数,进而提出了新的改进Bouc-Wen(MBW)模型,它可以用更少的参数来实现捏缩效应。基于预制RC桥墩的拟静力试验数据来验证MBW模型的有效性,利用MATLAB遗传算法工具箱对BWBN模型和MBW模型进行参数识别,结果表明,该文提出的MBW模型具有更高的计算精度。

粘铝合金板加固RC梁抗弯性能试验及正截面承载力

为了探讨铝合金板厚度与端部U形铝合金箍板构造对RC梁破坏机理及抗弯性能的影响,对16根铝合金板加固RC梁进行了4点弯曲静力加载试验。在试验梁底铝合金板的表面以及试验梁跨中截面的顶面、侧面粘贴应变片,在试验梁底跨中、梁顶两端支座布置百分表。为了推导铝合金板加固RC梁的正截面承载力计算式,基于试验得到的破坏机理,通过引入6个基本假定,分析了5种不同破坏模式的相对受压区高度。建立了各破坏模式下铝合金板加固RC梁的正截面承载力计算式,并将其与引入文献中的试验结果进行了对比分析。结果表明:试件破坏形态包括适筋破坏、端部铝合金板与结构胶剥离、端部铝合金板与梁剥离及中部铝合金板剥离4种情况;当端部设置U形铝合金箍板时,可有效抑制端部铝合金板发生剥离,使钢筋与铝合金板的材料性能得到充分发挥,试件承载力与延性明显提升;当铝合金板厚度分别为2~6 mm时,试件承载力随铝合金板厚度的增加而提高;端部设置U形铝合金箍板可有效防止端部铝合金板发生剥离,但试件仍可能会出现中部铝合金板剥离现象;当试件出现适筋破坏特征时,试件抗弯承载力的计算值与试验值比值均在1以下。本研究所提计算式具有明显的规律性和适用性,可为工程实际设计提供参考。

节点加强下UHPC加固RC方柱抗震性能研究

目的为解决超高性能混凝土(ultra-high performance concrete,UHPC)在加固钢筋混凝土方柱中与基础的脱黏问题,方法在节点加强下采用UHPC对钢筋混凝土方柱进行加固。为验证该加固方法的有效性,设计并制作4个试件,以加固与否、不同轴压比(0.2,0.4)为参数,对各试件的延性性能、累计耗能、峰值承载力等抗震性能指标进行分析。结果试验结果表明,UHPC节点加强加固柱的延性系数、累计耗能最高提升了15.7%,76.4%,承载力最大提升了37.6%,并且加固柱滞回曲线的捏拢效应有所改善,这是因为:一方面,采用节点加强可以增大UHPC加固层与基础顶面的黏结应力,使UHPC加固层与核心混凝土具有非常良好的协同工作作用;另一方面,UHPC加固层可以限制混凝土开裂和塑性铰区纵筋屈曲,从而提高塑性铰区的转动能力。随着轴压比提高,试件承载力呈上升趋势,但延性性能和累计耗能均有所下降,这是因为UHPC中的钢纤维具有桥联作用,抑制了水泥基体裂缝的发展,使UHPC加固层剥落不严重,对高轴压比试件的破坏形态改善较为明显。最后提出一种基于平截面假定的UHPC节点加强加固柱的压弯承载力计算方法,计算结果与试验结果的比值均大于0.85,具有较高的精度,验证了该计算方法的合理性。结论研究成果可为节点加强下UHPC加固RC方柱的实际工程应用及设计提供试验依据和理论参考。

CFRP布加固RC柱细观力学分析模型及抗扭分析

为了探究配纤率、截面形状、截面尺寸、轴压比对碳纤维增强复合材料(carbon fiber reinforced polymer,CFRP)加固钢筋混凝土(reinforced concrete,RC)柱抗扭性能的影响,采用了可以同时考虑混凝土材料非均质性、钢筋与混凝土间黏结-滑移关系、CFRP布与混凝土间界面关系的细观力学分析方法。首先,建立了用于CFRP布加固RC柱抗扭性能分析的三维数值模型;进而,将基于该模型的数值模拟结果与试验结果对比,验证了模型中加载方式、外贴CFRP布方法的合理性及材料参数的准确性;最后,基于建立的细观力学分析模型,探讨了配纤率、截面形状、截面尺寸、轴压比对扭转作用下CFRP布加固RC柱破坏模式和力学性能的影响机制。分析结果表明:CFRP布加固RC柱抗扭承载力随配纤率增大而提高,但提高幅度随配纤率增大而降低;受到围压分布的影响,圆形截面的有效约束面积大于方形截面,使得CFRP布对圆柱的约束效果好于方柱;CFRP布加固RC柱的名义扭转强度存在尺寸效应;轴压比的增大使其抗扭承载力先增大后减小,在轴压比为0.4时达到最大值。进一步,采用叠加规范公式方法提出了FRP布加固RC构件抗扭承载力计算公式,与数值模拟结果对比发现,该公式可给出安全储备冗余度30.2%的设计值,可初步用于CFRP布加固RC柱抗扭承载力的安全设计。

一种基于频差自校准的高精度RC振荡器

提出了一种基于频差自校准的高精度RC振荡器。通过对PTAT高频环形振荡器时钟计数,得到RC振荡器和参考时钟的计数偏差。数字自校准电路通过电阻阵列校准参考电压,减小计数偏差,进而得到稳定的振荡频率。参考时钟仅在工作前校准,实际工作中不需要额外的参考时钟。该RC振荡器采用CSMC 0.18μm工艺,工作电压为1.8 V。仿真结果表明,该电路可以产生2 MHz的稳定振荡频率,整个系统的功耗为48.4μW,启动时间小于15μs。在-40~125℃温度范围内,振荡频率变化率小于±0.2%。在1.70~1.98 V供电电压范围内,振荡频率变化率小于±0.25%/V。

近海大气环境下RC结构钢筋锈蚀程度预测

钢筋锈蚀是影响近海大气环境下RC结构使用寿命的重要因素之一。为研究近海大气环境下混凝土碳化与氯离子侵蚀双重作用对钢筋锈蚀的影响,对沿海地区不同龄期钢筋混凝土结构进行了工程实测,包括混凝土抗压强度、碳化深度、钢筋表面氯离子浓度及锈蚀深度。基于实测结果,拟合得到了混凝土碳化深度与抗压强度间的关系模型,建立了同时考虑混凝土碳化深度与钢筋表面氯离子浓度的钢筋锈蚀深度预测模型。在此基础上,利用Abaqus分析软件对不同龄期、轴压比的RC框架柱进行了损伤塑性分析,得到了锈蚀RC框架柱抗震性能随服役龄期与轴压比的变化规律。