Forming Condition and Geology Prediction Techniques of Deep Clastic Reservoirs

1 Introduction As new exploration domain for oil and gas,reservoirs with low porosity and low permeability have become a hotspot in recent years(Li Daopin,1997).With the improvement of technology,low porosity and low

Integrating the geology, seismic attributes, and production of reservoirs to adjust interwell areas: A case from the Mangyshlak Basin of West Kazakhstan

Dynamic models of the seismic,geological,and flow characteristics of a reservoir are the main tool used to evaluate the potential of drilling new infill wells.Static geological models are mainly based on borehole data combined with dynamic analyses of production dynamics.They are used to determine the redevelopment of and adjustments to new drilling locations;however,such models rarely incorporate seismic data.Consequently,it is difficult to control the changes in geological models between wells,which results in the configuration of well positions and predicted results being less than ideal.To improve the development of adjusted areas in terms of their remaining oil contents,we developed a new integrated analysis that combines static sediment modelling,including microfacies analysis(among other reservoir and seismic properties),with production behaviours.Here,we illustrate this new process by(1)establishing favourable areas for static geological analysis;(2)studying well recompletion potential and the condition of non-producing wells;(3)conducting interwell analyses with seismic and sedimentary data;(4)identifying potential sites constrained by seismic and geological studies,as well as initial oilfield production;(5)providing suggestions in a new well development plan.

Geologic Characteristics of Volcanic Hydrocarbon Reservoirs and Exploration Directions in China

Volcanic rocks are distributed widely in China, which are important exploration targets. By analyzing many discovered volcanic hydrocarbon reservoirs all over the world, the authors summarized the geologic characteristics of the formation of volcanic hydrocarbon reservoirs in China, and gave further exploration directions and advices. （1） There are mainly Carboniferous-Permian, Jurassic-Cretaceous, Paleogene-Neogene volcanic rocks in oil- and gas-bearing basins in China, which are mainly distributed in the Junggar Basin, Songliao Basin, Bohai Bay Basin, etc. There are mainly intermediate rocks and acidic rocks in east China, and intermediate rocks and basic rocks in west China. They primarily develop in intracontinentai rift settings and island arc environments. （2） Porefissure reservoirs are distributed widely in basins, which are volcanic rocks mainly in explosive and effusive facies. （3） Volcanic hydrocarbon reservoirs are chiefly near-source lithostratigraphic hydrocarbon reservoirs, and the oil and gas accumulation is predominantly controlled by lithotypes, faults and structural positions. （4） Deep-seated oil and gas reservoirs in the Songliao Basin and Carboniferous volcanic hydrocarbon reservoirs in the Junggar Basin are potential giant volcanic gas provinces, the volcanic hydrocarbon reservoirs in the Bohai Bay Basin and Santanghu Basin are favorable for oil and gas reserves increase, and volcanic rocks in the Turpan Basin, Sichuan Basin, Tarim Basin have exploration potentiality. （5） The technology series of oil and gas exploration in volcanic rocks have been preliminarily formed.

Application of 3D Reservoir Geological Model on Es1 Formation, Block Nv32, Shenvsi Oilfield, China

Three-dimensional geological modeling of reservoirs is an essential tool to predict reservoir performance and improve the understanding of reservoir uniqueness in Es1 formation. The paper focuses on the use of petrel software to build three-dimensional reservoir geological model which characterizes and assesses block Nv32 that located in the west of the Shenvsi oilfield in the south of Cangzhou city, Hebei province of China, and has an oil-bearing area of 1.4 km2. This study is depending on integration data from well logs of 22 wells which provided from geology, geophysics, and petrophysics to identify and provide precise depict of the subsurface internal structure and the reservoir heterogeneity. Input data was used to build the structural model, sedimentary facies model, petrophysical properties (porosity, permeability, saturation, and N/G model, and finally to determine the reservoir volume. The lithological facies were simulated using the assigned value method. Moreover, Petrophysical properties (Porosity, permeability, oil saturation and net to gross) were constructed for each zone using the Sequential Gaussian Simulation method to guide the distribution of petrophysical properties of Es1 formation, block Nv32. Statistical analysis of the porosity, permeability, oil saturation and N/G model present that the porosity occurrence distribution is mainly concern between 0.2% - 36.39% of block Nv32 with an average porosity value of 17.5%, permeability between 0.017 mD to 974.8 mD, having an average permeability of 59.44 mD, oil saturation between 0.00 to 0.95 having an average value of 0.22, and N/G is mainly concentrated between 0.01 to 1.00 within an average value of 0.61. This research has indicated the reliability of the three-dimensional model technique as a suitable tool to provide a sufficient understanding of petrophysical distribution. The south-western and north-western indicate that oilfield is very promising an exploratory well should be drilled to find out the thickness and size of the reservoir.

Progress in China's Unconventional Oil & Gas Exploration and Development and Theoretical Technologies

The new century has witnessed a strategic breakthrough in unconventional oil ＆ gas.Hydrocarbon accumulated in micro-/nano-scale pore throat shale systems has become an important domain that could replace current oil ＆ gas resources.Unconventional oil ＆ gas plays an increasingly important role in our energy demand.Tight gas,CBM,heavy oil and asphaltic sand have served as a key domain of exploration ＆ development,with tight oil becoming a ＇bright spot＇ domain and shale gas becoming a ＇hotspot＇ domain.China has made great breakthroughs in unconventional oil ＆ gas resources,such as tight gas,shale gas,tight oil and CBM,and great progress in oil shale,gas hydrate,heavy oil and oil sand.China has an estimated（223-263）×10~8t of unconventional oil resources and（890-1260）×l0^（12）m^3 of gas resources.China has made a breakthrough for progress in unconventional oil ＆ gas study.New progress achieved in fine-grained sedimentary studies related to continental open lacustrine basin large-scale shallow-water delta sand bodies,lacustrine basin central sandy clastic flow sediments and marine-continental fine-grained sediments provide a theoretical basis for the formation and distribution of basin central reservoir bodies.Great breakthroughs have been made in unconventional reservoir geology in respect of research methodology ＆ technology,multi-scale data merging and physical simulation of formation conditions.Overall characterization of unconventional reservoirs via multi-method and multi-scale becomes increasingly popular and facilitates the rapid development of unconventional oil ＆ gas geological theory,method and technology.The formation of innovative,continuous hydrocarbon accumulation theory,the establishment of the framework of the unconventional oil ＆ gas geological theory system,and the determination of the implications,geological feature,formation mechanism,distribution rule and core technology of unconventional oil＆ gas geological study lays a theoretical foundation for extensive unconventional oil ＆ gas exploration and development.Theories and technologies of unconventional oil ＆ gas exploration and development developed rapidly,including some key evaluation techniques such as ＇sweet spot zone＇ integrated evaluation and a six-property evaluation technique that uses hydrocarbon source,lithology,physical property,brittleness,hydrocarbon potential and stress anisotropy,and some key development ＆engineering technologies including micro-seismic monitoring,horizontal drilling ＆ completion and ＂factory-like＂ operation pattern, ＂man-made reservoir＂ development,which have facilitated the innovative development of unconventional oil ＆ gas.These breakthroughs define a new understanding in four aspects：①theoretical innovation;② key technologies;③ complete market mechanism and national policy support;and ④ well-developed ground infrastructure,which are significant for prolonging the life cycle of petroleum industry,accelerating the upgrade and development of theories and technologies and altering the global traditional energy structure.

Exploration of Subtle Trap in Jiyang Depression

This article analyses the procedure of exploration of the Tertiary subtle trap in Jiyang depression and divides the Tertiary subtle trap into 3 types (lithologic reservoir, stratigraphic reservoir and fractured reservoir) and 8 groups, then summarizes the common feature and founding discipline of the subtle trap and finds 4 accumulating modes including steep slope mode, depression mode, center anticline mode and gentle slope mode. Its main exploration methods are explicated from the viewpoint of reservoir geological modeling, description of recognizing traps and comprehensive evaluation of reservoir and so on.

Genetic mechanism and development of the unsteady Sarvak play of the Azadegan oil field,southwest of Iran

The upper Cretaceous Sarvak reservoir in the Azadegan oil field of southwest Iran has its oil–water contact nearly horizontal from the north to the center and dips steeply from the center to the south.The purpose of this paper is to interpret this abnormal reservoir feature by examining the accumulation elements,characteristics,and evolution based on the 3D seismic,coring,and well logging data.Generally,in the field,the Sarvak reservoir is massive and vertically heterogeneous,and impermeable interlayers are rare.The distribution of petrophysical properties is mainly dominated by the depositional paleogeomorphology and degrades from north to south laterally.The source is the lower Cretaceous Kazhdumi Formation of the eastern Dezful sag,and the seal is the muddy dense limestone of the Cenozoic Gurpi and Pebdeh Formations.Combined with the trap evolution,the accumulation evolution can be summarized as follows： the Sarvak play became a paleo-anticlinal trap in the Alpine tectonic activity after the late Cretaceous（96 Ma） and then was relatively peaceful in the later long geologic period.The Kazhdumi Formation entered in the oil window at the early Miocene（12–10 Ma） and charged the Sarvak bed,thus forming the paleo-reservoir.Impacted by the ZagrosOrogeny,the paleo-reservoir trap experienced a strong secondary deformation in the late Pliocene（4 Ma）,which shows as the paleo-trap shrank dramatically and the prelow southern area uplifted and formed a new secondary anticline trap,hence evolving to the current two structural highs with the south point（secondary trap） higher than the north（paleo-trap）.The trap deformation broke the paleoreservoir kinetic equilibrium and caused the secondary reservoir adjustment.The upper seal prevented vertical oil dissipation,and thus,the migration is mainly in interior Sarvak bed from northern paleo-reservoir to the southern secondary trap.The strong reservoir heterogeneity and the degradation trend of reservoir properties along migration path（north to south） made the reservoir readjustment extremely slow,plus the short and insufficient re-balance time,making the Sarvak form an ‘‘unsteady reservoir＇＇which is still in the readjustment process and has not reached a new balance state.The current abnormal oil–water contact versus the trap evolutionary trend indicates the secondary readjustment is still in its early stage and has only impacted part of paleo-reservoir.Consequently,not all of the reservoir is dominated by the current structure,and some parts still stay at the paleo-reservoir form.From the overview above,we suggest the following for the future development： In the northern structural high,the field development should be focused on the original paleoreservoir zone.In the southern structural high,compared with the secondary reservoir of the Sarvak with the tilted oil–water contact and huge geologic uncertainty,the lower sandstone reservoirs are more reliable and could be developed first,and then the deployment optimized of the upper Sarvak after obtaining sufficient geological data.By the hints of the similar reservoir characteristics and tectonic inheritance with Sarvak,the lower Cretaceous Fahliyancarbonate reservoir is also proved to be an unsteady reservoir with a tilted oil–water contact.

Sands modeling constrained by high-resolution seismic data

In the phase of field evaluation, the changing of interwell reservoir may be out of control if the geological model was built only on well data due to few existing wells. The uncertainty of the interwell reservoir interpolation based only on well data can be decreased by comprehensive utilization of geological, logging and seismic data, especially by using highly relative seismic properties from 3D seismic data adjusted by well point data to restrict interpolation of geological properties. A 3D-geological model which takes the sand body as the direct modeling object was built through stacking the structure, reservoir and water/oil/gas properties together in 3D space.

Three-dimensional electrical structure model of the Yangbajain geothermal field in Tibet:Evidence obtained from magnetotelluric data

The Yangbajain Geothermal Field in Tibet is located in the fault subsidence basin of the central Yadong-Gulu Rift Valley.The spatial distribution of the field is controlled by mountain-front fault zones on the northwestern and southeastern sides of the basin.Geothermal power has been generated in Yangbajain for more than 40 years.However,owing to the lack of threedimensional(3D) geophysical exploration data,key geological issues related to the partial melt body of the Yangbajain Geothermal Field,such as its location,burial depth,and geometric form,as well as the ascending channel of the geothermal fluid,have for a long time been controversial.In this study,3D inversion was performed using measured geo-electromagnetic total impedance tensor data from 47 survey points.The extracted horizontal sections at different depths and profiles,and at different lines,reflect the 3D electrical structure model of the geothermal field in the study area.Subsequently,three findings were obtained.First,the partial melt body,located below the China-Nepal Highway extending along the northeast direction,is the heat source of the Yangbajain Geothermal Field.The burial depth range of the molten body was determined to range between approximately 6.2 and 14 km.Moreover,the geothermal fluid ascended a horn-shaped circulation channel with an up-facing opening,located in the northern section of the sulfur ditch area.The study results revealed that deep rock fissures(>2 km) were not well developed and had poor permeability.In addition,no layered heat reservoirs with high water richness were observed in the northern part of the study area.However,the application of enhanced geothermal system(EGS) technology in the northern region would be essential to improving the power generation capacity of the Yangbajain Geothermal Field.In addition,the study found no deep high-temperature heat storage areas in the southern region of the study area.